The DOI matches its Crossref record; 517 of the 517 references it cites were found in a registry or an index.
Progress in CFD Simulations of Fluidized Beds for Chemical and Energy Process Engineering
Open accessAbstract
Gas-solid fluidized beds have drawn the attention of engineers and researchers as an effective technology for a large variety of applications, and numerical simulations can play an increasingly relevant role in their development and optimization. Although real-time simulations will require substantial progress in the accuracy, capability, and efficiency of numerical models, future developments could herald a new era of so-called virtual reality for process engineering, featuring interactive simulations instead of stepwise experimental scale-up studies and cost-intensive empirical trial-and-error methods. This review paper provides a significant body of knowledge on the developments of CFD mathematical models and how they can be applied in various fluidized-bed systems. The review is divided into three main parts. The first part (Mathematical modeling) describes the state-of-the-art numerical models of gas-solid flows (two-fluid model, soft-sphere model, hard-sphere model, and hybrid model) and their fundamental assumptions (gas-solid, particle-particle, and particle-wall interactions). Special attention is devoted to the forces and the moments of the forces acting on particles, the parcel modeling, the homogeneous and structure-dependent drag models, the non-spherical particle models, the heat and mass transfer, and the turbulence. The second part of this review (State-of-the-art studies) is dedicated to the body of literature, focusing on how these numerical models are applied to fluidized-bed systems used in chemical and energy process engineering. Relevant works on simulation in the literature up to 2021 are analyzed, complemented by an overview of popularly used commercial and in-house simulation codes. Particular attention is paid to those studies that include measurement validation, to achieve a fundamentally competitive comparison between the different numerical models. The pros and cons of applying CFD models to fluidized-bed systems are studied and assessed based on the existing body of literature. The third part of this review (Conclusion and prospects) highlights current research trends, identifying research gaps and opportunities for future ways, in which CFD can be applied to fluidized beds for energetic and chemical processes.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Items 401–517 of 517
CFD-DEM investigation of particle elutriation with electrostatic effects in gas-solid fluidized beds
Yang, Y., Zi, C., Huang, Z., et al. (2016) · Powder Technology · doi:10.1016/j.powtec.2016.12.032 · Cited by 47
An overview of Eulerian CFD modeling and simulation of non-spherical biomass particles
Ullah, A., Hong, K., Gao, Y., Güngör, A., & Zaman, M. (2019) · Renewable Energy · doi:10.1016/j.renene.2019.04.074 · Cited by 47
Coalescence and break-up of drops in two-phase flows
Podvysotskii, A. M., & Shraiber, A. A. (1984) · International Journal of Multiphase Flow · doi:10.1016/0301-9322(84)90017-x · Cited by 46
Square-well model for cohesion in fluidized beds
Weber, M. W., & Hrenya, C. M. (2006) · Chemical Engineering Science · doi:10.1016/j.ces.2006.02.008 · Cited by 46
Li, Z., Xu, H., Yang, W., Zhou, A., & Xu, M. (2019) · Energy Conversion and Management · doi:10.1016/j.enconman.2019.112143 · Cited by 46
A CPFD model for a bubbly biomass–sand fluidized bed
Fotovat, F., Abbasi, A., Spiteri, R. J., de Lasa, H., & Chaouki, J. (2015) · Powder Technology · doi:10.1016/j.powtec.2015.01.005 · Cited by 45
Saha, D., Bäbler, M. U., Holzner, M., Šoóš, M., Lüthi, B., Liberzon, A., & Kinzelbach, W. K. H. (2015) · Langmuir · doi:10.1021/acs.langmuir.5b03804 · Cited by 45
Fernandez, A., Palacios, C., Echegaray, M., Mazza, G., & Rodríguez, R. (2017) · Combustion Science and Technology · doi:10.1080/00102202.2017.1377701 · Cited by 45
Alobaid, F., Busch, J.-P., Stroh, A., Ströhle, J., & Epple, B. (2019) · Journal of the Energy Institute · doi:10.1016/j.joei.2019.07.008 · Cited by 45
Self-citationStroh, A., Alobaid, F., Busch, J.-P., Ströhle, J., & Epple, B. (2015) · Energy · doi:10.1016/j.energy.2015.03.078 · Cited by 44
Self-citationA lattice Boltzmann method for simulating transport and agglomeration of resolved particles
Ernst, M., Dietzel, M., & Sommerfeld, M. (2013) · Acta Mechanica · doi:10.1007/s00707-013-0923-1 · Cited by 43
Babu, B. V., & Chaurasia, A. (2003) · Chemical Engineering Science · doi:10.1016/j.ces.2003.10.014 · Cited by 43
Breuer, M., & Hoppe, F. (2016) · International Journal of Multiphase Flow · doi:10.1016/j.ijmultiphaseflow.2016.10.007 · Cited by 43
Operation of a 1 MWth calcium looping pilot plant firing waste-derived fuels in the calciner
Haaf, M., Hilz, J., Peters, J., Unger, A., Ströhle, J., & Epple, B. (2020) · Powder Technology · doi:10.1016/j.powtec.2020.05.074 · Cited by 43
Self-citationLuo, K., Wang, D., Jin, T., Wang, S., Wang, Z., Tan, J., & Fan, J. (2020) · Chemical Engineering Science · doi:10.1016/j.ces.2020.116245 · Cited by 43
Experimental study on the fluidization behaviors of the superfine particles
Liu, H., Zhang, L., Chen, T., et al. (2014) · Chemical Engineering Journal · doi:10.1016/j.cej.2014.09.124 · Cited by 42
Energy Management and Efficiency for the Process Industries
(2015) · Wiley eBooks · doi:10.1002/9781119033226 · Cited by 42
Adamczyk, W. P. (2016) · Archives of Computational Methods in Engineering · doi:10.1007/s11831-016-9186-z · Cited by 42
Gu, J., Liu, Q., Zhong, W., & Yu, A. (2020) · Advanced Powder Technology · doi:10.1016/j.apt.2020.03.007 · Cited by 42
Study of Geldart's Group A behaviour using the discrete element method simulation
Pandit, J. K., Wang, X. S., & Rhodes, M. J. (2005) · Powder Technology · doi:10.1016/j.powtec.2005.04.044 · Cited by 41
Yan, W., Li, J., & Luo, Z. (2012) · Powder Technology · doi:10.1016/j.powtec.2012.07.047 · Cited by 41
Dietzel, M., & Sommerfeld, M. (2013) · Powder Technology · doi:10.1016/j.powtec.2013.09.023 · Cited by 41
Transportvorgänge in der Verfahrenstechnik
Kraume, M. (2004) · Springer eBooks · doi:10.1007/978-3-642-18936-4 · Cited by 41
A novel Lagrangian agglomerate structure model
Sommerfeld, M., & Stübing, S. (2017) · Powder Technology · doi:10.1016/j.powtec.2017.06.016 · Cited by 41
Herce, C., Cortés, C., & Stendardo, S. (2019) · Fuel Processing Technology · doi:10.1016/j.fuproc.2019.01.003 · Cited by 41
3D simulation on pressurized oxy-fuel combustion of coal in fluidized bed
Gu, J., Shao, Y., & Zhong, W. (2020) · Advanced Powder Technology · doi:10.1016/j.apt.2020.05.005 · Cited by 41
Stability of colliding drops of ideal liquid
Архипов, В. А., Vasenin, I. M., & Trofimov, V. F. (1983) · Journal of Applied Mechanics and Technical Physics · doi:10.1007/bf00909756 · Cited by 40
Lee, Y. R., Choi, H. S., Park, H. C., & Lee, J. E. (2015) · Computers & Chemical Engineering · doi:10.1016/j.compchemeng.2015.07.007 · Cited by 39
Xue, Q., & Fox, R. O. (2014) · Industrial & Engineering Chemistry Research · doi:10.1021/ie503806p · Cited by 39
CFD simulation of air-blown coal gasification in a fluidized bed reactor with continuous feedstock
Yang, S., Liu, X., & Wang, S. (2020) · Energy Conversion and Management · doi:10.1016/j.enconman.2020.112774 · Cited by 39
Pawar, S. K., Padding, J. T., Deen, N. G., Jongsma, A., Innings, F., & Kuipers, J. A. M. (2015) · Chemical Engineering Science · doi:10.1016/j.ces.2015.07.048 · Cited by 38
Motlagh, A. H. A., Grace, J. R., Salcudean, M., et al. (2014) · Chemical Engineering Science · doi:10.1016/j.ces.2014.08.042 · Cited by 38
Zhang, Y., Chao, Z., & Jakobsen, H. A. (2017) · Chemical Engineering Journal · doi:10.1016/j.cej.2017.03.046 · Cited by 38
An efficient and reliable predictive method for fluidized bed simulation
Lu, L., Benyahia, S., & Li, T. (2017) · AIChE Journal · doi:10.1002/aic.15832 · Cited by 38
Wu, Y. J., Liu, D., Zheng, D., Ma, J., Duan, L., & Chen, X. (2019) · Fuel Processing Technology · doi:10.1016/j.fuproc.2019.106129 · Cited by 38
Challenges and Issues on the CFD Modeling of Fluidized Beds: A Review
Lettieri, P., & Mazzei, L. (2009) · The Journal of Computational Multiphase Flows · doi:10.1260/175748209789563937 · Cited by 37
Coarse grid simulation of heterogeneous gas–solid flow in a CFB riser with polydisperse particles
Chen, X., Wang, J., & Li, J. (2013) · Chemical Engineering Journal · doi:10.1016/j.cej.2013.08.108 · Cited by 37
Herce, C., Cortés, C., & Stendardo, S. (2017) · Fuel Processing Technology · doi:10.1016/j.fuproc.2017.07.003 · Cited by 37
Sia, S. Q., & Wang, W. (2020) · Renewable Energy · doi:10.1016/j.renene.2020.03.134 · Cited by 37
Liu, S., & Xiao, W. (2015) · Chemical Engineering Science · doi:10.1016/j.ces.2015.01.026 · Cited by 36
On Particle-Grid Interpolation and Calculating Chemistry in Particle-in-Cell Methods
O'Rourke, P. J., Brackbill, J. U., & Larrouturou, B. (1993) · Journal of Computational Physics · doi:10.1006/jcph.1993.1197 · Cited by 36
Numerical modeling of self-heating and self-ignition in a packed-bed of biomass using XDEM
Mahmoudi, A. H., Hoffmann, F., Markovic, M., Peters, B. J., & Brem, G. (2015) · Combustion and Flame · doi:10.1016/j.combustflame.2015.10.010 · Cited by 36
Mahmoudi, A. H., Hoffmann, F., & Peters, B. J. (2015) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.10.033 · Cited by 35
Gerber, S., & Oevermann, M. (2013) · Fuel · doi:10.1016/j.fuel.2013.06.049 · Cited by 35
CO2 Adsorption loop experiment with Eulerian–Lagrangian simulation
Clark, S. M., Snider, D. M., & Spenik, J. (2013) · Powder Technology · doi:10.1016/j.powtec.2013.01.011 · Cited by 35
Upadhyay, M., Park, H. C., Hwang, J. G., Choi, H. S., Jang, H., & Seo, Y. (2017) · Powder Technology · doi:10.1016/j.powtec.2017.06.021 · Cited by 35
Akbari, V., Borhani, T. N. G., Shamiri, A., Aramesh, R., Hussain, M. A., & Hamid, M. K. A. (2015) · Process Safety and Environmental Protection · doi:10.1016/j.cherd.2015.07.016 · Cited by 34
Challenge problem: 1. Model validation of circulating fluidized beds
Panday, R., Shadle, L. J., Shahnam, M., et al. (2014) · Powder Technology · doi:10.1016/j.powtec.2014.02.010 · Cited by 34
Buist, K. A., van Erdewijk, T. W., Deen, N. G., et al. (2015) · AIChE Journal · doi:10.1002/aic.14949 · Cited by 33
Identification of thermal zones and population balance modelling of fluidized bed spray granulation
Turchiuli, C., Jimenèz, T., & Dumoulin, É. (2010) · Powder Technology · doi:10.1016/j.powtec.2010.08.057 · Cited by 32
Dong, N., Luo, K. H., & Wang, Q. (2016) · Fuel Processing Technology · doi:10.1016/j.fuproc.2016.09.015 · Cited by 32
Multi-scale CFD simulations of bubbling fluidized bed methanation process
Li, J., & Yang, B. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.08.204 · Cited by 32
Wang, T., Wang, S., & Shen, Y. (2021) · Powder Technology · doi:10.1016/j.powtec.2021.02.034 · Cited by 32
Salehi, M., Askarishahi, M., Godini, H. R., Schomäcker, R., & Wozny, G. (2016) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.5b02433 · Cited by 31
Upadhyay, M., Park, H. C., & Choi, H. S. (2018) · Chemical Engineering and Processing - Process Intensification · doi:10.1016/j.cep.2018.04.028 · Cited by 31
Parametric analysis of biomass fast pyrolysis in a downer fluidized bed reactor
makkawi, Y. T., Yu, X., & Ocone, R. (2019) · Renewable Energy · doi:10.1016/j.renene.2019.05.077 · Cited by 31
Soria, J. M. G., Daniel, G., Flamant, G., Rodríguez, R., & Mazza, G. (2015) · Waste Management · doi:10.1016/j.wasman.2015.05.021 · Cited by 30
Eri, Q., Zhao, X., Ranganathan, P., & Gu, S. (2017) · Fuel · doi:10.1016/j.fuel.2017.01.109 · Cited by 29
Li, T., Rabha, S. S., Verma, V., et al. (2017) · Advanced Powder Technology · doi:10.1016/j.apt.2017.09.003 · Cited by 29
Hejazi, B., Grace, J. R., Bi, X. T., & Mahecha‐Botero, A. (2017) · Energy & Fuels · doi:10.1021/acs.energyfuels.7b01833 · Cited by 29
Gan, J., Zhao, H. J., Berrouk, A. S., et al. (2011) · Powder Technology · doi:10.1016/j.powtec.2011.11.041 · Cited by 28
Revisiting the standard drag law for bubbling, gas-fluidized beds
Leboreiro, J., Joseph, G. G., & Hrenya, C. M. (2008) · Powder Technology · doi:10.1016/j.powtec.2008.01.008 · Cited by 28
Zhang, J., Mao, M. X., Ye, J., et al. (2016) · Powder Technology · doi:10.1016/j.powtec.2016.07.069 · Cited by 28
Meso-scale drag model designed for coarse-grid Eulerian-Lagrangian simulation of gas-solid flows
Yu, Y., Li, Y., Jiang, M., et al. (2020) · Chemical Engineering Science · doi:10.1016/j.ces.2020.115747 · Cited by 28
DEM Study of Wet Cohesive Particles in the Presence of Liquid Bridges in a Gas Fluidized Bed
He, Y., Peng, W., Wang, T., et al. (2014) · Mathematical Problems in Engineering · doi:10.1155/2014/316568 · Cited by 27
Zhong, H., Zhang, J., Zhu, Y., & Liang, S. (2016) · Energy & Fuels · doi:10.1021/acs.energyfuels.6b00914 · Cited by 27
Kraft, S., Kuba, M., Kirnbauer, F., Bosch, K., & Hofbauer, H. (2016) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2016.02.020 · Cited by 26
Towards a deterministic composite collision outcome model for surface-tension dominated droplets
Almohammed, N., & Breuer, M. (2018) · International Journal of Multiphase Flow · doi:10.1016/j.ijmultiphaseflow.2018.08.007 · Cited by 26
Self-citationZafiryadis, F., Jensen, A. D., Laxminarayan, Y., et al. (2020) · Powder Technology · doi:10.1016/j.powtec.2020.11.070 · Cited by 26
CFD in Drying Technology – Spray‐Dryer Simulation
Blei, S., & Sommerfeld, M. (2007) · Wiley eBooks · doi:10.1002/9783527631629.ch5 · Cited by 25
Zhong, H., Zhang, J., Zhu, Y., & Liang, S. (2018) · Chemical Engineering and Processing - Process Intensification · doi:10.1016/j.cep.2018.03.030 · Cited by 25
Vandewalle, L. A., Marin, G. B., & Geem, K. M. V. (2020) · Energy & Fuels · doi:10.1021/acs.energyfuels.0c02824 · Cited by 25
Zhang, W., & You, C. (2015) · Powder Technology · doi:10.1016/j.powtec.2015.05.025 · Cited by 24
Break-Up of Aerosol Agglomerates in Highly Turbulent Gas Flow
Ammar, Y., Dehbi, A., & Reeks, M. W. (2012) · Flow Turbulence and Combustion · doi:10.1007/s10494-012-9398-8 · Cited by 24
Pozzobon, V., Colin, J., & Perré, P. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.07.214 · Cited by 24
Wang, Z., Liu, M., & Yang, X. (2020) · Powder Technology · doi:10.1016/j.powtec.2020.06.086 · Cited by 24
Chen, M., Chen, Z., Gong, M., Tang, Y., & Liu, M. (2021) · Particuology · doi:10.1016/j.partic.2021.01.004 · Cited by 24
Chang, J., Wu, Z., Wang, X., & Liu, W. (2019) · Powder Technology · doi:10.1016/j.powtec.2019.04.028 · Cited by 23
CFD modeling of gasification process in tapered fluidized bed gasifier
Askaripour, H. (2019) · Energy · doi:10.1016/j.energy.2019.116515 · Cited by 23
Micale, D., Uglietti, R., Bracconi, M., & Maestri, M. (2021) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.0c05845 · Cited by 23
Uglietti, R., Bracconi, M., & Maestri, M. (2020) · Reaction Chemistry & Engineering · doi:10.1039/c9re00440h · Cited by 22
Li, X., Wang, L., Jia, L., & Cai, W. (2016) · Energy and Buildings · doi:10.1016/j.enbuild.2016.11.035 · Cited by 22
Pan, H., Liang, X.-F., Zhu, L., & Luo, Z. (2017) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.7b02912 · Cited by 22
Investigation on Sodium Fate for High Alkali Coal during Circulating Fluidized Bed Combustion
Ji, J., Cheng, L., Liu, Y., Wei, Y., & Nie, L. (2019) · Energy & Fuels · doi:10.1021/acs.energyfuels.8b03812 · Cited by 22
Ahmed, I., & de Lasa, H. (2020) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.9b05753 · Cited by 22
Zhu, Y., Chen, G., & Luo, Z. (2013) · Industrial & Engineering Chemistry Research · doi:10.1021/ie403227z · Cited by 21
Lee, J. E., Park, H. C., & Choi, H. S. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.6b02360 · Cited by 21
Numerical simulation of struvite crystallization in fluidized bed reactor
Ye, X., Gao, Y., Cheng, J., Chu, D., Ye, Z., & Chen, S. (2017) · Chemical Engineering Science · doi:10.1016/j.ces.2017.10.048 · Cited by 20
Assessment of sorption-enhanced crude glycerol steam reforming process via CFD simulation
Wang, S., Yang, X., Xu, S., Zhang, K., & Li, B. (2018) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2018.06.053 · Cited by 20
Impact of polydispersity on the flow dynamics in the riser of a circulating fluidized bed
Yang, S., Wang, S., & Wang, H. (2020) · Powder Technology · doi:10.1016/j.powtec.2020.12.015 · Cited by 20
Mellin, P., Kantarelis, E., Zhou, C., & Yang, W. (2014) · Industrial & Engineering Chemistry Research · doi:10.1021/ie501996v · Cited by 19
Numerical and Experimental Study on Oxy-fuel Coal and Biomass Co-firing in a Bubbling Fluidized Bed
Chen, C., Zhao, L., Wu, X., & Wang, J. (2019) · Energy & Fuels · doi:10.1021/acs.energyfuels.8b04163 · Cited by 19
Zhong, H., Xu, F., Zhang, J., Zhu, Y., Liang, S., Niu, B., & Zhang, X. (2018) · Renewable Energy · doi:10.1016/j.renene.2018.11.097 · Cited by 18
Heat transfer in a pulsating turbulent fluidized bed
Lee, J. M., & Lim, E. W. C. (2020) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2020.115321 · Cited by 18
A Mixing Behavior Study of Biomass Particles and Sands in Fluidized Bed Based on CFD-DEM Simulation
Wang, H., & Zhong, Z. (2019) · Energies · doi:10.3390/en12091801 · Cited by 17
Parallelization of a stochastic Euler-Lagrange model applied to large scale dense bubbly flows
Kamath, S., Masterov, M. V., Padding, J. T., Buist, K. A., Baltussen, M. W., & Kuipers, J. A. M. (2020) · Journal of Computational Physics X · doi:10.1016/j.jcpx.2020.100058 · Cited by 17
Verissimo, G. L., Leiroz, A. J. K., & Cruz, M. E. (2020) · Fuel · doi:10.1016/j.fuel.2020.118750 · Cited by 17
Ghadirian, E., Abbasian, J., & Arastoopour, H. (2017) · Powder Technology · doi:10.1016/j.powtec.2017.09.037 · Cited by 16
Experimental validation of CFD hydrodynamic models for catalytic fast pyrolysis
Adkins, B. D., Kapur, N., Dudley, T., Webb, S., & Blaser, P. J. (2016) · Powder Technology · doi:10.1016/j.powtec.2016.11.060 · Cited by 14
Detailed CFD modelling of fast pyrolysis of different biomass types in fluidized bed reactors
Eri, Q., Wang, B., Peng, J., et al. (2018) · The Canadian Journal of Chemical Engineering · doi:10.1002/cjce.23180 · Cited by 14
Che, Y., Tian, Z., Liu, Z., Zhang, R., Gao, Y., Zou, E., Wang, S., & Liu, B. (2016) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.6b00596 · Cited by 12
The effect of particle polydispersion in a gasifier bed dynamics using Eulerian-Eulerian models
Cubero, A., Sánchez-Insa, A., & Fueyo, N. (2019) · Fuel Processing Technology · doi:10.1016/j.fuproc.2019.106216 · Cited by 12
Peña-Monferrer, C., Monrós-Andreu, G., Chiva, S., Martínez-Cuenca, R., & Muñoz-Cobo, J. L. (2017) · Chemical Engineering Science · doi:10.1016/j.ces.2017.11.005 · Cited by 11
Techno-economic assessment of polygeneration based on fluidized bed gasification
Heinze, C., May, J., Peters, J., Ströhle, J., & Epple, B. (2019) · Fuel · doi:10.1016/j.fuel.2019.04.020 · Cited by 11
Self-citationAzizi, S., & Mowla, D. (2015) · International Journal of Chemical Reactor Engineering · doi:10.1515/ijcre-2014-0185 · Cited by 10
Fast Eulerian-Lagrangian simulations of moving particle beds under pseudo-steady-state conditions
Lichtenegger, T. (2019) · Powder Technology · doi:10.1016/j.powtec.2019.10.113 · Cited by 10
Yang, S., & Wang, S. (2020) · ACS Omega · doi:10.1021/acsomega.9b03903 · Cited by 9
CFD Hydrodynamics Investigations for Optimum Biomass Gasifier Design
Fanelli, E. (2020) · Processes · doi:10.3390/pr8101323 · Cited by 9
Simulation of a reactive fluidized bed reactor using CFD/DEM
Dufresne, Y., Moureau, V. R., Masi, E., Simonin, O., & Horwitz, J. A. K. (2016) · Open Archive Toulouse Archive Ouverte (University of Toulouse) · doi:10.13140/rg.2.2.15281.79201 · Cited by 7
Numerical Studies for the CO2 Capture Process in a Fluidized-Bed Absorber
Yu, G., Zhao, L., Chen, J., Hu, T., Dai, B., Liu, D., & Huang, Y. (2014) · Energy & Fuels · doi:10.1021/ef5007963 · Cited by 6
Alobaid, F. (2018) · Springer tracts in mechanical engineering · doi:10.1007/978-3-319-76234-0_3 · Cited by 6
Self-citationPeña-Monferrer, C., Monrós-Andreu, G., Chiva, S., Martı́nez-Cuenca, R., & Muñoz-Cobo, J. L. (2017) · Chemical Engineering Science · doi:10.1016/j.ces.2017.11.032 · Cited by 5
CO2 Adsorption: Experimental Investigation and CFD Reactor Model Validation
Breault, R. W., Shadle, L. J., Spenik, J., & Huckaby, E. D. (2014) · Journal of Computational Environmental Sciences · doi:10.1155/2014/503194 · Cited by 3
A Radiative Transfer Modeling Methodology in Gas-Liquid Multiphase Flow Simulations
Krishnamoorthy, G., Klosterman, R., & Shallbetter, D. (2014) · Journal of Engineering · doi:10.1155/2014/793238 · Cited by 3
Bandara, J. C., Moldestad, B. M. E., & Eikeland, M. S. (2018) · NORA - Norwegian Open Research Archives · Cited by 3
Computational studies to investigate the fuel feeding point in fluidized bed reactor
Yan, Y. C., Lim, R. X. Y., Walvekar, R., & Lim, C. H. (2015) · Journal of engineering science & technology · Cited by 1
Smagorinsky (1963) · doi:10.1175/1520-0493(1963)091<0099:gcewtp>2.3.co;2
Cited by
A review of recent development for the CFD-DEM investigations of non-spherical particles
Ma, H., Zhou, L., Liu, Z., Chen, M., Xia, X., & Zhao, Y. (2022) · Powder Technology · doi:10.1016/j.powtec.2022.117972 · Cited by 286
Metadata
- Authors
- Alobaid, F., Almohammed, N., Massoudi Farid, M., May, J., Rößger, P., Richter, A., & Epple, B.
- Venue
- Progress in Energy and Combustion Science
- Publisher
- Elsevier BV
- Published
- 2022-07
- Volume
- 91
- Pages
- 100930
- ISSN
- 0360-1285 (ISSN-L)
- OpenAlex
- W4200111462
- Cited by
- 266
- References
- 517
- FWCI
- 20.91
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.