The DOI matches its Crossref record; 517 of the 517 references it cites were found in a registry or an index.
Progress in CFD Simulations of Fluidized Beds for Chemical and Energy Process Engineering
Open accessAbstract
Gas-solid fluidized beds have drawn the attention of engineers and researchers as an effective technology for a large variety of applications, and numerical simulations can play an increasingly relevant role in their development and optimization. Although real-time simulations will require substantial progress in the accuracy, capability, and efficiency of numerical models, future developments could herald a new era of so-called virtual reality for process engineering, featuring interactive simulations instead of stepwise experimental scale-up studies and cost-intensive empirical trial-and-error methods. This review paper provides a significant body of knowledge on the developments of CFD mathematical models and how they can be applied in various fluidized-bed systems. The review is divided into three main parts. The first part (Mathematical modeling) describes the state-of-the-art numerical models of gas-solid flows (two-fluid model, soft-sphere model, hard-sphere model, and hybrid model) and their fundamental assumptions (gas-solid, particle-particle, and particle-wall interactions). Special attention is devoted to the forces and the moments of the forces acting on particles, the parcel modeling, the homogeneous and structure-dependent drag models, the non-spherical particle models, the heat and mass transfer, and the turbulence. The second part of this review (State-of-the-art studies) is dedicated to the body of literature, focusing on how these numerical models are applied to fluidized-bed systems used in chemical and energy process engineering. Relevant works on simulation in the literature up to 2021 are analyzed, complemented by an overview of popularly used commercial and in-house simulation codes. Particular attention is paid to those studies that include measurement validation, to achieve a fundamentally competitive comparison between the different numerical models. The pros and cons of applying CFD models to fluidized-bed systems are studied and assessed based on the existing body of literature. The third part of this review (Conclusion and prospects) highlights current research trends, identifying research gaps and opportunities for future ways, in which CFD can be applied to fluidized beds for energetic and chemical processes.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Schlichting, H., & Gersten, K. (2000) · Springer eBooks · doi:10.1007/978-3-642-85829-1 · Cited by 18,700
A discrete numerical model for granular assemblies
Cundall, P. A., & Strack, O. D. L. (1979) · Géotechnique · doi:10.1680/geot.1979.29.1.47 · Cited by 17,527
Pope, S. B. (2000) · Cambridge University Press eBooks · doi:10.1017/cbo9780511840531 · Cited by 8,477
Surface energy and the contact of elastic solids
Johnson, K. L., Kendall, K., & Roberts, A. D. (1971) · Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences · doi:10.1098/rspa.1971.0141 · Cited by 8,061
A dynamic subgrid–scale eddy viscosity model
Germano, M., Piomelli, U., Moin, P., & Cabot, W. H. (1991) · Physics of Fluids A: Fluid Dynamics · doi:10.1063/1.857955 · Cited by 7,305
Fluid Flow Through Packed Columns
Ergün, Ş. (1952) · Medical Entomology and Zoology · Cited by 6,992
Equation of State for Nonattracting Rigid Spheres
Carnahan, N. F., & Starling, K. E. (1969) · The Journal of Chemical Physics · doi:10.1063/1.1672048 · Cited by 5,280
Computer Simulation Using Particles
Hockney, R. W., & Eastwood, J. W. (2021) · CRC Press eBooks · doi:10.1201/9780367806934 · Cited by 4,383
The London—van der Waals attraction between spherical particles
Hamaker, H. C. (1937) · Physica · doi:10.1016/s0031-8914(37)80203-7 · Cited by 3,967
Geldart, D. (1973) · Powder Technology · doi:10.1016/0032-5910(73)80037-3 · Cited by 3,481
Multiphase Flows with Droplets and Particles
Crowe, C. T., Schwarzkopf, J. D., Sommerfeld, M., & Tsuji, Y. (2011) · doi:10.1201/b11103 · Cited by 3,076
Lun, C. K. K., Savage, S. B., Jeffrey, D. J., & Chepurniy, N. (1984) · Journal of Fluid Mechanics · doi:10.1017/s0022112084000586 · Cited by 3,067
Introduction to Physical Polymer Science
Sperling, L. H. (2005) · doi:10.1002/0471757128 · Cited by 2,917
Phase Transition for a Hard Sphere System
Alder, B. J., & Wainwright, T. E. (1957) · The Journal of Chemical Physics · doi:10.1063/1.1743957 · Cited by 2,644
(1991) · Elsevier eBooks · doi:10.1016/c2009-0-24190-0 · Cited by 2,595
Discrete particle simulation of two-dimensional fluidized bed
Tsuji, Y., Kawaguchi, T., & Tanaka, T. (1993) · Powder Technology · doi:10.1016/0032-5910(93)85010-7 · Cited by 2,462
Wen, C. Y. (1966) · Medical Entomology and Zoology · Cited by 2,381
Lagrangian numerical simulation of plug flow of cohesionless particles in a horizontal pipe
Tsuji, Y., Tanaka, T., & Ishida, T. (1992) · Powder Technology · doi:10.1016/0032-5910(92)88030-l · Cited by 2,147
Drag coefficient and terminal velocity of spherical and nonspherical particles
Haider, A., & Levenspiel, O. (1989) · Powder Technology · doi:10.1016/0032-5910(89)80008-7 · Cited by 2,130
Fluid Mechanical Description of Fluidized Beds. Equations of Motion
Anderson, T. B., & Jackson, R. (1967) · Industrial & Engineering Chemistry Fundamentals · doi:10.1021/i160024a007 · Cited by 2,066
Discrete particle simulation of particulate systems: Theoretical developments
Zhu, H. P., Zhou, Z. Y., Yang, R. Y., & Yu, A. B. (2007) · Chemical Engineering Science · doi:10.1016/j.ces.2006.12.089 · Cited by 2,055
Johnson, P. C., & Jackson, R. (1987) · Journal of Fluid Mechanics · doi:10.1017/s0022112087000570 · Cited by 1,920
A bubbling fluidization model using kinetic theory of granular flow
Ding, J., & Gidaspow, D. (1990) · AIChE Journal · doi:10.1002/aic.690360404 · Cited by 1,845
Turbulent Dispersed Multiphase Flow
Balachandar, S., & Eaton, J. K. (2010) · Annual Review of Fluid Mechanics · doi:10.1146/annurev.fluid.010908.165243 · Cited by 1,771
On predicting particle-laden turbulent flows
Elghobashi, S. (1994) · Applied Scientific Research · doi:10.1007/bf00936835 · Cited by 1,554
The voidage function for fluid-particle interaction systems
Di Felice, R. (1994) · International Journal of Multiphase Flow · doi:10.1016/0301-9322(94)90011-6 · Cited by 1,537
Discrete particle simulation of particulate systems: A review of major applications and findings
Zhu, H. P., Zhou, Z. Y., Yang, R. Y., & Yu, A. B. (2008) · Chemical Engineering Science · doi:10.1016/j.ces.2008.08.006 · Cited by 1,473
The general theory of molecular forces
London, F. (1937) · Transactions of the Faraday Society · doi:10.1039/tf937330008b · Cited by 1,461
Volume, Shape, and Roundness of Rock Particles
Wadell, H. (1932) · The Journal of Geology · doi:10.1086/623964 · Cited by 1,413
A theory for the rapid flow of identical, smooth, nearly elastic, spherical particles
Jenkins, J. T., & Savage, S. B. (1983) · Journal of Fluid Mechanics · doi:10.1017/s0022112083001044 · Cited by 1,387
Thermal Radiation Heat Transfer
Howell, J. R., Menguc, M. P., & Siegel, R. (2015) · doi:10.1201/b18835 · Cited by 1,383
Aspects of Computer Simulation of Liquid-Fueled Combustors
Gosman, A. D., & loannides, E. (1983) · Journal of Energy · doi:10.2514/3.62687 · Cited by 1,379
Transfer of heat or mass to particles in fixed and fluidised beds
Gunn, D. J. (1978) · International Journal of Heat and Mass Transfer · doi:10.1016/0017-9310(78)90080-7 · Cited by 1,227
MFIX documentation theory guide
Syamlal, M., USDOE, W., Rogers, W., & O`Brien, T. (1993) · OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) · doi:10.2172/10145548 · Cited by 1,176
Description of aerosol dynamics by the quadrature method of moments
McGraw, R. (1997) · Aerosol Science and Technology · doi:10.1080/02786829708965471 · Cited by 1,128
Comparison of contact-force models for the simulation of collisions in DEM-based granular flow codes
Di Renzo, A., & Di Maio, F. P. (2004) · Chemical Engineering Science · doi:10.1016/j.ces.2003.09.037 · Cited by 1,127
Fluid catalytic cracking: recent developments on the grand old lady of zeolite catalysis
Vogt, E. T. C., & Weckhuysen, B. M. (2015) · Chemical Society Reviews · doi:10.1039/c5cs00376h · Cited by 1,075
The transverse force on a spinning sphere moving in a viscous fluid
Rubinow, S. I., & Keller, J. B. (1961) · Journal of Fluid Mechanics · doi:10.1017/s0022112061000640 · Cited by 1,074
Hoomans, B. P. B., Kuipers, J. A. M., Briels, W. J., & van Swaaij, W. P. M. (1996) · Chemical Engineering Science · doi:10.1016/0009-2509(95)00271-5 · Cited by 1,019
Dispersion and Deposition of Spherical Particles from Point Sources in a Turbulent Channel Flow
Li, A., & Ahmadi, G. (1992) · Aerosol Science and Technology · doi:10.1080/02786829208959550 · Cited by 1,002
Review of discrete particle modeling of fluidized beds
Deen, N. G., Van Sint Annaland, M., Van der Hoef, M. A., & Kuipers, J. A. M. (2007) · Chemical Engineering Science · doi:10.1016/j.ces.2006.08.014 · Cited by 995
Xu, B. H., & Yu, A. B. (1997) · Chemical Engineering Science · doi:10.1016/s0009-2509(97)00081-x · Cited by 959
Discrete particle simulation of particle–fluid flow: model formulations and their applicability
ZHOU, Z. Y., KUANG, S. B., CHU, K. W., & YU, A. B. (2010) · Journal of Fluid Mechanics · doi:10.1017/s002211201000306x · Cited by 921
Modeling of biomass gasification in fluidized bed
Gómez-Barea, A., & Leckner, B. (2010) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2009.12.002 · Cited by 905
Rolling Resistance at Contacts in Simulation of Shear Band Development by DEM
Iwashita, K., & Oda, M. (1998) · Journal of Engineering Mechanics · doi:10.1061/(asce)0733-9399(1998)124:3(285 · Cited by 848
Recent advances in the development of biomass gasification technology: A comprehensive review
Sansaniwal, S. K., Pal, K., Rosen, M. A., & Tyagi, S. K. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.01.038 · Cited by 846
Regimes of coalescence and separation in droplet collision
QIAN, J., & LAW, C. K. (1997) · Journal of Fluid Mechanics · doi:10.1017/s0022112096003722 · Cited by 841
Solution of population balance equations using the direct quadrature method of moments
Marchisio, D. L., & Fox, R. O. (2005) · Journal of Aerosol Science · doi:10.1016/j.jaerosci.2004.07.009 · Cited by 803
Handbook of Fluidization and Fluid-Particle Systems
(2003) · CRC Press eBooks · doi:10.1201/9780203912744 · Cited by 772
Kinetics of Thermal Decomposition of Pulverized Coal Particles
Badzioch, S., & HAWKSLEY, P. G. W. (1970) · Industrial & Engineering Chemistry Process Design and Development · doi:10.1021/i260036a005 · Cited by 763
A Theoretical Study of the Liquid Bridge Forces between Two Rigid Spherical Bodies
Lian, G., Thornton, C., & Adams, M. J. (1993) · Journal of Colloid and Interface Science · doi:10.1006/jcis.1993.1452 · Cited by 762
Chemical Kinetics of Biomass Pyrolysis
Ranzi, E., Cuoci, A., Faravelli, T., Frassoldati, A., Migliavacca, G., Pierucci, S., & Sommariva, S. (2008) · Energy & Fuels · doi:10.1021/ef800551t · Cited by 757
Coalescence and separation in binary collisions of liquid drops
Ashgriz, N., & Poo, J. Y. (1990) · Journal of Fluid Mechanics · doi:10.1017/s0022112090003536 · Cited by 753
The multiphase particle-in-cell (MP-PIC) method for dense particulate flows
Andrews, M. J., & O'Rourke, P. J. (1996) · International Journal of Multiphase Flow · doi:10.1016/0301-9322(95)00072-0 · Cited by 753
Inverse Radiative Heat Transfer
Modest, M. F. (2013) · Radiative Heat Transfer · doi:10.1016/b978-0-12-386944-9.50023-6 · Cited by 741
Rolling friction in the dynamic simulation of sandpile formation
Zhou, Y. C., Wright, B. D., Yang, R. Y., Xu, B. H., & Yu, A. B. (1999) · Physica A: Statistical Mechanics and its Applications · doi:10.1016/s0378-4371(99)00183-1 · Cited by 717
Steam-gasification of biomass in a fluidised-bed of olivine particles
Rapagnà, S. (2000) · Biomass and Bioenergy · doi:10.1016/s0961-9534(00)00031-3 · Cited by 689
Biomass pyrolysis-a review of modelling, process parameters and catalytic studies
Sharma, A., Pareek, V., & Zhang, D. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.04.193 · Cited by 675
A literature review on mechanisms and models for the coalescence process of fluid particles
Liao, Y., & Lucas, D. (2010) · Chemical Engineering Science · doi:10.1016/j.ces.2010.02.020 · Cited by 663
Zhong, W., Yu, A., Liu, X., Tong, Z., & Zhang, H. (2016) · Powder Technology · doi:10.1016/j.powtec.2016.07.010 · Cited by 659
Post-combustion carbon capture
Chao, C., Deng, Y., Dewil, R., Baeyens, J., & Fan, X. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2020.110490 · Cited by 652
Computer Simulation of Liquids
Allen, M. P., Tildesley, D. J., & Banavar, J. R. (1989) · Physics Today · doi:10.1063/1.2810937 · Cited by 637
Numerical Simulation of Dense Gas-Solid Fluidized Beds: A Multiscale Modeling Strategy
van der Hoef, M. A., van Sint Annaland, M., Deen, N. G., & Kuipers, J. A. M. (2008) · Annual Review of Fluid Mechanics · doi:10.1146/annurev.fluid.40.111406.102130 · Cited by 632
Deposition of Suspended Particles from Turbulent Gas Streams
Friedlander, S. K., & Johnstone, H. F. (1957) · Industrial & Engineering Chemistry · doi:10.1021/ie50571a039 · Cited by 631
I-COLLIDE: an interactive and exact collision detection system for large-scale environments
Cohen, J. D., Lin, M. C., Manocha, D., & Ponamgi, M. (1995) · Proceedings of the 1995 symposium on Interactive 3D graphics - SI3D '95 · doi:10.1145/199404.199437 · Cited by 628
Chemical looping combustion of solid fuels
Adánez, J., Abad, A., Mendiara, T., Gayán, P., de Diego, L. F., & García-Labiano, F. (2018) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2017.07.005 · Cited by 612
Pan, S.-Y., Du, M. A., Huang, I.-T., Liu, I.-H., Chang, E.-E., & Chiang, P.-C. (2015) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.06.124 · Cited by 609
A two-equation turbulence model for two-phase flows
Elghobashi, S., & Abou-Arab, T. W. (1983) · The Physics of Fluids · doi:10.1063/1.864243 · Cited by 605
Eulerian two-phase flow theory applied to fluidization
Enwald, H., Peirano, E., & Almstedt, A.-E. (1996) · International Journal of Multiphase Flow · doi:10.1016/s0301-9322(96)90004-x · Cited by 599
Liquid velocity distribution in two-phase bubble flow
Sato, Y., & Sekoguchi, K. (1975) · International Journal of Multiphase Flow · doi:10.1016/0301-9322(75)90030-0 · Cited by 594
Turbulent Diffusion of Heavy Particles in the Atmosphere
Csanady, G. T. (1963) · Journal of the Atmospheric Sciences · Cited by 580
Lu, G., Third, J. R., & Müller, C. R. (2015) · Chemical Engineering Science · doi:10.1016/j.ces.2014.11.050 · Cited by 577
Numerical simulation of cohesive powder behavior in a fluidized bed
Mikami, T., Kamiya, H., & Horio, M. (1998) · Chemical Engineering Science · doi:10.1016/s0009-2509(97)00325-4 · Cited by 577
Chesters, A. K. (1991) · TU/e Research Portal · Cited by 571
Influence of rolling friction on single spout fluidized bed simulation
Goniva, C., Kloss, C., Deen, N. G., Kuipers, J. A. M., & Pirker, S. (2012) · Particuology · doi:10.1016/j.partic.2012.05.002 · Cited by 547
Methanol-to-hydrocarbons: process technology
Keil, F. J. (1999) · Microporous and Mesoporous Materials · doi:10.1016/s1387-1811(98)00320-5 · Cited by 533
Quadrature method of moments for aggregation-breakage processes
Marchisio, D. L., Vigil, R. D., & Fox, R. O. (2003) · Journal of Colloid and Interface Science · doi:10.1016/s0021-9797(02)00054-1 · Cited by 524
HOEF, M. A. V. D., BEETSTRA, R., & KUIPERS, J. A. M. (2005) · Journal of Fluid Mechanics · doi:10.1017/s0022112004003295 · Cited by 515
Review and extension of normal force models for the Discrete Element Method
Kruggel-Emden, H., Simsek, E., Rickelt, S., Wirtz, S., & Scherer, V. (2007) · Powder Technology · doi:10.1016/j.powtec.2006.10.004 · Cited by 514
Hydrodynamics of binary fluidization in a riser: CFD simulation using two granular temperatures
Huilin, L., & Gidaspow, D. (2003) · Chemical Engineering Science · doi:10.1016/s0009-2509(03)00238-0 · Cited by 494
Moderate-Reynolds-number flows in ordered and random arrays of spheres
Hill, R. J., Koch, D. L., & Ladd, A. J. C. (2001) · Journal of Fluid Mechanics · doi:10.1017/s0022112001005936 · Cited by 494
Comparative analysis of CFD models of dense gas–solid systems
Wachem, B. G. M. V., Schouten, J. C., Bleek, C. M. V. D., et al. (2001) · AIChE Journal · doi:10.1002/aic.690470510 · Cited by 493
Filtered two‐fluid models for fluidized gas‐particle suspensions
Igci, Y., Andrews, A. T., Sundaresan, S., Pannala, S., & O'Brien, T. (2008) · AIChE Journal · doi:10.1002/aic.11481 · Cited by 480
Micro-deformation mechanism of shear banding process based on modified distinct element method
Iwashita, K., & Oda, M. (2000) · Powder Technology · doi:10.1016/s0032-5910(99)00236-3 · Cited by 461
Tenneti, S., Garg, R., & Subramaniam, S. (2011) · International Journal of Multiphase Flow · doi:10.1016/j.ijmultiphaseflow.2011.05.010 · Cited by 459
Snider, D. M., Clark, S. M., & O'Rourke, P. J. (2011) · Chemical Engineering Science · doi:10.1016/j.ces.2010.12.042 · Cited by 451
Computer simulation of granular shear flows
Campbell, C. S., & Brennen, C. E. (1985) · Journal of Fluid Mechanics · doi:10.1017/s002211208500091x · Cited by 451
An experimental investigation on the collision behaviour of hydrocarbon droplets
Jiang, Y. J., Umemura, A., & Law, C. K. (1992) · Journal of Fluid Mechanics · doi:10.1017/s0022112092000740 · Cited by 433
Favier, J. F., Abbaspour-Fard, M. H., Kremmer, M., & Raji, A. O. (1999) · Engineering Computations · doi:10.1108/02644409910271894 · Cited by 431
Mattisson, T., Lyngfelt, A., & Cho, P. (2001) · Fuel · doi:10.1016/s0016-2361(01)00051-5 · Cited by 400
Direct simulation scheme derived from the Boltzmann equation. I. Monocomponent gases
Nanbu, K. (1980) · Journal of the Physical Society of Japan · doi:10.1143/jpsj.49.2042 · Cited by 397
Self-diffusion in sintering of metallic particles
Kuczynski, G. C. (1949) · JOM · doi:10.1007/bf03398090 · Cited by 393
Contacting modes and behaviour classification of gas—solid and other two‐phase suspensions
Grace, J. R. (1986) · The Canadian Journal of Chemical Engineering · doi:10.1002/cjce.5450640301 · Cited by 393
MILLER, R. S., & BELLAN, J. (1997) · Combustion Science and Technology · doi:10.1080/00102209708935670 · Cited by 388
Chemical-looping combustion of solid fuels – Status of development
Lyngfelt, A. (2014) · Applied Energy · doi:10.1016/j.apenergy.2013.05.043 · Cited by 387
Modeling and numerical simulation of particulate flows by the Eulerian–Lagrangian approach
Patankar, N. A., & Joseph, D. D. (2001) · International Journal of Multiphase Flow · doi:10.1016/s0301-9322(01)00021-0 · Cited by 378
Continuum theory for dense gas-solid flow: A state-of-the-art review
Wang, J. (2020) · Chemical Engineering Science · doi:10.1016/j.ces.2019.115428 · Cited by 368
The oblique impact of elastic spheres
Maw, N., Barber, J. R., & Fawcett, J. N. (1976) · Wear · doi:10.1016/0043-1648(76)90201-5 · Cited by 366
Large-scale discrete element modeling in pneumatic conveying
Sakai, M., & Koshizuka, S. (2009) · Chemical Engineering Science · doi:10.1016/j.ces.2008.10.003 · Cited by 364
Multiscale Modeling of Gas-Fluidized Beds
van der Hoef, M. A., Ye, M., van Sint Annaland, M., Andrews, A. T., Sundaresan, S., & Kuipers, J. A. M. (2006) · Advances in Chemical Engineering · doi:10.1016/s0065-2377(06)31002-2 · Cited by 363
Sommerfeld, M. (2001) · International Journal of Multiphase Flow · doi:10.1016/s0301-9322(01)00035-0 · Cited by 362
A two-equation turbulence model of turbulent bubbly flows
Troshko, A. A., & Hassan, Y. A. (2001) · International Journal of Multiphase Flow · doi:10.1016/s0301-9322(01)00043-x · Cited by 360
Numerical calculation of multiphase fluid flow
Harlow, F. H., & Amsden, A. A. (1975) · Journal of Computational Physics · doi:10.1016/0021-9991(75)90061-3 · Cited by 359
Peng, Z., Doroodchi, E., Luo, C., & Moghtaderi, B. (2014) · AIChE Journal · doi:10.1002/aic.14421 · Cited by 359
Product yields and kinetics from the vapor phase cracking of wood pyrolysis tars
Boroson, M. L., Howard, J. B., Longwell, J. P., & Peters, W. A. (1989) · AIChE Journal · doi:10.1002/aic.690350113 · Cited by 350
Flow regimes in a spout–fluid bed: A combined experimental and simulation study
Link, J. M., Cuypers, L. A., Deen, N. G., & Kuipers, J. A. M. (2005) · Chemical Engineering Science · doi:10.1016/j.ces.2005.01.027 · Cited by 349
Aerosol particle deposition in numerically simulated channel flow
McLaughlin, J. B. (1989) · Physics of Fluids A: Fluid Dynamics · doi:10.1063/1.857344 · Cited by 348
Particle-Resolved Direct Numerical Simulation for Gas-Solid Flow Model Development
Tenneti, S., & Subramaniam, S. (2014) · Annual Review of Fluid Mechanics · doi:10.1146/annurev-fluid-010313-141344 · Cited by 348
Discrete Element Method Simulations for Complex Granular Flows
Guo, Y., & Curtis, J. S. (2015) · Annual Review of Fluid Mechanics · doi:10.1146/annurev-fluid-010814-014644 · Cited by 346
The interaction of falling water drops: coalescence
Brazier-Smith, P. R., Jennings, S. G., & Latham, J. (1972) · Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences · doi:10.1098/rspa.1972.0016 · Cited by 340
Solid fuels in chemical-looping combustion
LEION, H., MATTISSON, T., & LYNGFELT, A. (2008) · International Journal of Greenhouse Gas Control · doi:10.1016/s1750-5836(07)00117-x · Cited by 339
Particle scale study of heat transfer in packed and bubbling fluidized beds
Zhou, Z. Y., Yu, A. B., & Zulli, P. (2009) · AIChE Journal · doi:10.1002/aic.11823 · Cited by 339
CFD-DEM modelling and simulation of pneumatic conveying: A review
Kuang, S., Zhou, M., & Yu, A. (2020) · Powder Technology · doi:10.1016/j.powtec.2019.02.011 · Cited by 331
Solitons, solitary waves, and voidage disturbances in gas-fluidized beds
Harris, S. E., & Crighton, D. G. (1994) · Journal of Fluid Mechanics · doi:10.1017/s0022112094000996 · Cited by 326
Generalized friction factor and drag coefficient correlations for fluid-particle interactions
Gibilaro, L. G., Felice, R. D., Waldram, S. P., & Foscolo, P. U. (1985) · Chemical Engineering Science · doi:10.1016/0009-2509(85)80116-0 · Cited by 325
Mathematical Model for Wood PyrolysisComparison of Experimental Measurements with Model Predictions
Grønli, M. G., & Melaaen, M. C. (2000) · Energy & Fuels · doi:10.1021/ef990176q · Cited by 320
Methods for multiphase computational fluid dynamics
van Wachem, B. G. M., & Almstedt, A. E. (2003) · Chemical Engineering Journal · doi:10.1016/j.cej.2003.08.025 · Cited by 319
CFD–DEM simulation of the gas–solid flow in a cyclone separator
Chu, K. W., Wang, B., Xu, D. L., Chen, Y. X., & Yu, A. B. (2011) · Chemical Engineering Science · doi:10.1016/j.ces.2010.11.026 · Cited by 319
The use of iron oxide as oxygen carrier in a chemical-looping reactor
Abad, A., Mattisson, T., Lyngfelt, A., & Johansson, M. (2007) · Fuel · doi:10.1016/j.fuel.2006.09.021 · Cited by 318
Kinetics of Primary Product Formation from Wood Pyrolysis
Di Blasi, C., & Branca, C. (2001) · Industrial & Engineering Chemistry Research · doi:10.1021/ie000997e · Cited by 307
CFD simulation of dense particulate reaction system: Approaches, recent advances and applications
Zhong, W., Yu, A., Zhou, G., Xie, J., & Zhang, H. (2016) · Chemical Engineering Science · doi:10.1016/j.ces.2015.09.035 · Cited by 301
Modeling the outcome of drop–drop collisions in Diesel sprays
Post, S. L., & Abraham, J. (2002) · International Journal of Multiphase Flow · doi:10.1016/s0301-9322(02)00007-1 · Cited by 300
Exploring complex systems in chemical engineering—the multi-scale methodology
Li, J., & Kwauk, M. (2003) · Chemical Engineering Science · doi:10.1016/s0009-2509(02)00577-8 · Cited by 297
Abad, A., Mattisson, T., Lyngfelt, A., & Rydén, M. (2006) · Fuel · doi:10.1016/j.fuel.2005.11.014 · Cited by 289
Wang, J., Ge, W., & Li, J. (2007) · Chemical Engineering Science · doi:10.1016/j.ces.2007.11.023 · Cited by 284
Fluidization and agglomerate structure of SiO2 nanoparticles
Yao, W., Gu, G., Fei, W., et al. (2002) · Powder Technology · doi:10.1016/s0032-5910(01)00491-0 · Cited by 283
Steam gasification of biomass in dual fluidized bed gasifiers: A review
Karl, J., & Pröll, T. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2018.09.010 · Cited by 283
Coarse-Grid Simulation of Gas-Particle Flows in Vertical Risers
Andrews, Loezos, P. N., & Sundaresan, S. (2005) · Industrial & Engineering Chemistry Research · doi:10.1021/ie0492193 · Cited by 275
Reactivity of coal gasification with steam and CO2
Molina, A., & Mondragón, F. (1998) · Fuel · doi:10.1016/s0016-2361(98)00123-9 · Cited by 271
Review and implementation of CFD-DEM applied to chemical process systems
Golshan, S., Sotudeh-Gharebagh, R., Zarghami, R., Mostoufi, N., Blais, B., & Kuipers, J. A. M. (2020) · Chemical Engineering Science · doi:10.1016/j.ces.2020.115646 · Cited by 270
On models for turbulence modulation in fluid–particle flows
Crowe, C. T. (2000) · International Journal of Multiphase Flow · doi:10.1016/s0301-9322(99)00050-6 · Cited by 268
Roos, Y. H. (2002) · Le Lait · doi:10.1051/lait:2002025 · Cited by 268
Power Generation from Solid Fuels
Spliethoff, H. (2010) · Power systems · doi:10.1007/978-3-642-02856-4 · Cited by 267
High‐temperature kinetics of the homogeneous reverse water–gas shift reaction
Bustamante, F., Enick, R. M., Cugini, A. V., et al. (2004) · AIChE Journal · doi:10.1002/aic.10099 · Cited by 264
The capture of aerosol particles by surfaces
Dahneke, B. (1971) · Journal of Colloid and Interface Science · doi:10.1016/0021-9797(71)90302-x · Cited by 261
Rong, L. W., Dong, K. J., & Yu, A. B. (2013) · Chemical Engineering Science · doi:10.1016/j.ces.2013.05.036 · Cited by 254
Sommerfeld, M. (2003) · International Journal of Multiphase Flow · doi:10.1016/s0301-9322(03)00031-4 · Cited by 248
Discrete particle simulation of gas fluidization of ellipsoidal particles
Zhou, Z. Y., Pinson, D., Zou, R. P., & Yu, A. B. (2011) · Chemical Engineering Science · doi:10.1016/j.ces.2011.08.041 · Cited by 245
Son, S. R., & Kim, S. D. (2006) · Industrial & Engineering Chemistry Research · doi:10.1021/ie050919x · Cited by 242
Hydrodynamics of fluidization using kinetic theory: an emerging paradigm
Gidaspow, D., Jung, J., & Singh, R. K. (2004) · Powder Technology · doi:10.1016/j.powtec.2004.09.025 · Cited by 237
The effects of mesoscale structures on the macroscopic momentum equations for two-phase flows
Zhang, D. Z., & VanderHeyden, W. B. (2002) · International Journal of Multiphase Flow · doi:10.1016/s0301-9322(02)00005-8 · Cited by 237
DEM–CFD modeling of a fluidized bed spray granulator
Fries, L., Antonyuk, S., Heinrich, S., & Palzer, S. (2011) · Chemical Engineering Science · doi:10.1016/j.ces.2011.02.038 · Cited by 235
Lun, C. K. K., & Savage, S. B. (1986) · Acta Mechanica · doi:10.1007/bf01182538 · Cited by 235
Point-Particle DNS and LES of Particle-Laden Turbulent flow - a state-of-the-art review
M. Kuerten, J. G. (2016) · Flow, Turbulence and Combustion · doi:10.1007/s10494-016-9765-y · Cited by 234
Kinetic and Heat Transfer Control in the Slow and Flash Pyrolysis of Solids
Di Blasi, C. (1996) · Industrial & Engineering Chemistry Research · doi:10.1021/ie950243d · Cited by 230
Kawaguchi, T., Tanaka, T., & Tsuji, Y. (1998) · Powder Technology · doi:10.1016/s0032-5910(97)03366-4 · Cited by 224
(Yali) Tang, Y., (Frank) Peters, E. A. J. F., (Hans) Kuipers, J. A. M., (Sebastian) Kriebitzsch, S. H. L., & (Martin) van der Hoef, M. A. (2015) · AIChE Journal · doi:10.1002/aic.14645 · Cited by 223
Effect of interparticle forces on the hydrodynamic behaviour of fluidized aerogels
Chaouki, J., Chavarie, C., Klvana, D., & Pajonk, G. (1985) · Powder Technology · doi:10.1016/0032-5910(85)87003-0 · Cited by 222
Bierwisch, C., Kraft, T., Riedel, H., & Moseler, M. (2009) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2008.10.006 · Cited by 218
Goldschmidt, M. J. V., Beetstra, R., & Kuipers, J. A. M. (2004) · Powder Technology · doi:10.1016/j.powtec.2004.02.020 · Cited by 217
Gerber, S., Behrendt, F., & Oevermann, M. (2010) · Fuel · doi:10.1016/j.fuel.2010.03.034 · Cited by 216
Kinetic modeling of the thermal degradation and combustion of biomass
Ranzi, E., Corbetta, M., Manenti, F., & Pierucci, S. (2013) · Chemical Engineering Science · doi:10.1016/j.ces.2013.08.014 · Cited by 216
Applicability of a coarse-grained CFD–DEM model on dense medium cyclone
Chu, K., Chen, J., & Yu, A. (2016) · Minerals Engineering · doi:10.1016/j.mineng.2016.01.020 · Cited by 214
Effect of the subgrid scales on particle motion
Armenio, V., Piomelli, U., & Fiorotto, V. (1999) · Physics of Fluids · doi:10.1063/1.870162 · Cited by 213
Assessment of Model Formulations in the Discrete Particle Simulation of Gas−Solid Flow
Feng, Y. Q., & Yu, A. B. (2004) · Industrial & Engineering Chemistry Research · doi:10.1021/ie049387v · Cited by 213
Fluidized bed waste incinerators: Design, operational and environmental issues
Van Caneghem, J., Brems, A., Lievens, P., Block, C., Billen, P., Vermeulen, I., Dewil, R., Baeyens, J., & Vandecasteele, C. (2012) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2012.03.001 · Cited by 213
Estrade, J.-P., Carentz, H., Lavergne, G., & Biscos, Y. (1999) · International Journal of Heat and Fluid Flow · doi:10.1016/s0142-727x(99)00036-3 · Cited by 210
A CFD model for biomass fast pyrolysis in fluidized-bed reactors
Xue, Q., Heindel, T. J., & Fox, R. O. (2011) · Chemical Engineering Science · doi:10.1016/j.ces.2011.03.010 · Cited by 209
Fan, F.-G., & Ahmadi, G. (1993) · Journal of Aerosol Science · doi:10.1016/0021-8502(93)90084-m · Cited by 206
Müller, C. R., Holland, D. J., Sederman, A. J., Scott, S. A., Dennis, J. S., & Gladden, L. F. (2008) · Powder Technology · doi:10.1016/j.powtec.2007.11.046 · Cited by 203
Chiesa, M., Mathiesen, V., Melheim, J. A., & Halvorsen, B. (2005) · Computers & Chemical Engineering · doi:10.1016/j.compchemeng.2004.09.002 · Cited by 201
Wang, S., Luo, K., & Fan, J. (2020) · Chemical Engineering Science · doi:10.1016/j.ces.2020.115550 · Cited by 201
Collision dynamics of granular particles with adhesion
Brilliantov, N. V., Albers, N., Spahn, F., & Pöschel, T. (2007) · Physical Review E · doi:10.1103/physreve.76.051302 · Cited by 195
A unified model for particulate expansion of fluidised beds and flow in fixed porous media
Foscolo, P. U., Gibilaro, L. G., & Waldram, S. P. (1983) · Chemical Engineering Science · doi:10.1016/0009-2509(83)80045-1 · Cited by 193
A bubble-based EMMS model for gas–solid bubbling fluidization
Shi, Z., Wang, W., & Li, J. (2011) · Chemical Engineering Science · doi:10.1016/j.ces.2011.07.020 · Cited by 193
Overview of Computational Fluid Dynamics Simulation of Reactor-Scale Biomass Pyrolysis
Xiong, Q., Yang, Y., Xu, F., Pan, Y., Zhang, J., Hong, K., Lorenzini, G., & Wang, S. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.6b02634 · Cited by 191
Adhesion of ultrafine particles—A micromechanical approach
Tomas, J. (2007) · Chemical Engineering Science · doi:10.1016/j.ces.2006.12.055 · Cited by 190
CPFD simulation of circulating fluidized bed risers
Chen, C., Werther, J., Heinrich, S., Qi, H.-Y., & Hartge, E.-U. (2013) · Powder Technology · doi:10.1016/j.powtec.2012.10.014 · Cited by 190
A Laboratory and Field Study of Cobble Abrasion
Wentworth, C. K. (1919) · The Journal of Geology · doi:10.1086/622676 · Cited by 188
Gouesbet, G., & Berlemont, A. (1999) · Progress in Energy and Combustion Science · doi:10.1016/s0360-1285(98)00018-5 · Cited by 187
Kraft, S., Kirnbauer, F., & Hofbauer, H. (2017) · Applied Energy · doi:10.1016/j.apenergy.2016.12.113 · Cited by 187
Effects of temperature and pressure on gas-solid fluidization
Yates, J. G. (1996) · Chemical Engineering Science · doi:10.1016/0009-2509(95)00212-x · Cited by 186
Uncatalyzed and wall‐catalyzed forward water–gas shift reaction kinetics
Bustamante, F., Enick, R. M., KILLMEYER, R. P., Howard, B., Rothenberger, K. S., Cugini, A. V., Morreale, B. D., & Ciocco, M. V. (2005) · AIChE Journal · doi:10.1002/aic.10396 · Cited by 186
Granular dynamics simulation of segregation phenomena in bubbling gas-fluidised beds
Hoomans, B. P. B., Kuipers, J. A. M., & van Swaaij, W. P. M. (2000) · Powder Technology · doi:10.1016/s0032-5910(99)00225-9 · Cited by 185
Simulation of deformation and breakup of large aggregates in flows of viscous fluids
Higashitani, K., Iimura, K., & Sanda, H. (2001) · Chemical Engineering Science · doi:10.1016/s0009-2509(00)00477-2 · Cited by 185
Mixed biomass pellets for thermal energy production: A review of combustion models
Nunes, L. J. R., Matias, J. C. O., & Catalào, J. P. S. (2014) · Applied Energy · doi:10.1016/j.apenergy.2014.04.042 · Cited by 184
Deen, N. G., Peters, E. A. J. F., Padding, J. T., & Kuipers, J. A. M. (2014) · Chemical Engineering Science · doi:10.1016/j.ces.2014.05.039 · Cited by 183
Review of reactor for chemical looping combustion of solid fuels
Song, T., & Shen, L. (2018) · International Journal of Greenhouse Gas Control · doi:10.1016/j.ijggc.2018.06.004 · Cited by 183
Structure and breakup of flocs subjected to fluid stresses
Sonntag, R. C., & Russel, W. B. (1987) · Journal of Colloid and Interface Science · doi:10.1016/0021-9797(87)90053-1 · Cited by 182
Wu, H., Gui, N., Yang, X., Tu, J., & Jiang, S. (2017) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2017.03.035 · Cited by 180
Numerical prediction of erosion in elbow based on CFD-DEM simulation
Xu, L., Zhang, Q., Zheng, J., & Zhao, Y. (2016) · Powder Technology · doi:10.1016/j.powtec.2016.08.050 · Cited by 179
Experimental validation and CFD modeling study of biomass fast pyrolysis in fluidized-bed reactors
Xue, Q., Dalluge, D., Heindel, T. J., Fox, R. O., & Brown, R. C. (2012) · Fuel · doi:10.1016/j.fuel.2012.02.065 · Cited by 177
Multi-scale modeling of dense phase gas–particle flow
Tsuji, Y. (2007) · Chemical Engineering Science · doi:10.1016/j.ces.2006.12.090 · Cited by 174
Anand, A., Curtis, J. S., Wassgren, C. R., Hancock, B. C., & Ketterhagen, W. R. (2009) · Chemical Engineering Science · doi:10.1016/j.ces.2009.09.001 · Cited by 172
Sun, R., & Xiao, H. (2015) · International Journal of Multiphase Flow · doi:10.1016/j.ijmultiphaseflow.2015.08.014 · Cited by 171
Koullapis, P. G., Kassinos, S. C., Bivolarova, M. P., & Melikov, A. K. (2016) · Journal of Biomechanics · doi:10.1016/j.jbiomech.2015.11.029 · Cited by 170
NO formation and selective non-catalytic reduction (SNCR) in a fluidized bed combustor of biomass
Mahmoudi, S., Baeyens, J., & Seville, J. P. K. (2010) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2010.04.013 · Cited by 167
Adánez, J., Dueso, C., de Diego, L. F., García-Labiano, F., Gayán, P., & Abad, A. (2009) · Energy & Fuels · doi:10.1021/ef8005146 · Cited by 167
Gotaas, C., Havelka, P., Jakobsen, H. A., Svendsen, H. F., Hase, M., Roth, N., & Weigand, B. (2007) · Physics of Fluids · doi:10.1063/1.2781603 · Cited by 165
Collision dynamics in fluidised bed granulators: A DEM-CFD study
Fries, L., Antonyuk, S. I., Heinrich, S., Dopfer, D., & Palzer, S. (2012) · Chemical Engineering Science · doi:10.1016/j.ces.2012.06.026 · Cited by 165
Study on a large-scale discrete element model for fine particles in a fluidized bed
Sakai, M., Takahashi, H., Pain, C. C., Latham, J.-P., & Xiang, J. (2012) · Advanced Powder Technology · doi:10.1016/j.apt.2011.08.006 · Cited by 165
Simulation of particle-to-particle interactions in gas solid flows
Oesterle´, B., & Petitjean, A. (1993) · International Journal of Multiphase Flow · doi:10.1016/0301-9322(93)90033-q · Cited by 164
Coarse-Grain DEM Modelling in Fluidized Bed Simulation: A Review
Di Renzo, A., Napolitano, E., & Di Maio, F. (2021) · Processes · doi:10.3390/pr9020279 · Cited by 164
Wang, J., Cheng, G., You, Y., Xiao, B., Liu, S., He, P., Guo, D., Guo, X., & Zhang, G. (2012) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2012.01.070 · Cited by 160
Comparison of CFD–DEM heat transfer simulations with infrared/visual measurements
Patil, A. V., Peters, E. A. J. F., & Kuipers, J. A. M. (2015) · Chemical Engineering Journal · doi:10.1016/j.cej.2015.04.131 · Cited by 160
Muguruma, Y., Tanaka, T., & Tsuji, Y. (2000) · Powder Technology · doi:10.1016/s0032-5910(99)00226-0 · Cited by 159
Vollmari, K., Jasevičius, R., & Kruggel-Emden, H. (2016) · Powder Technology · doi:10.1016/j.powtec.2015.11.045 · Cited by 159
Solar pyrolysis of carbonaceous feedstocks: A review
Zeng, K., Gauthier, D., Soria, J., Mazza, G., & Flamant, G. (2017) · Solar Energy · doi:10.1016/j.solener.2017.05.033 · Cited by 159
Averaging method of granular materials
Zhu, H., & Yu, A. (2002) · Physical review. E, Statistical physics, plasmas, fluids, and related interdisciplinary topics · doi:10.1103/physreve.66.021302 · Cited by 156
Numerical and experimental study on multiple-spout fluidized beds
van Buijtenen, M. S., van Dijk, W.-J., Deen, N. G., Kuipers, J. A. M., Leadbeater, T. W., & Parker, D. J. (2011) · Chemical Engineering Science · doi:10.1016/j.ces.2011.02.055 · Cited by 155
Cited by
A review of recent development for the CFD-DEM investigations of non-spherical particles
Ma, H., Zhou, L., Liu, Z., Chen, M., Xia, X., & Zhao, Y. (2022) · Powder Technology · doi:10.1016/j.powtec.2022.117972 · Cited by 286
Metadata
- Authors
- Alobaid, F., Almohammed, N., Massoudi Farid, M., May, J., Rößger, P., Richter, A., & Epple, B.
- Venue
- Progress in Energy and Combustion Science
- Publisher
- Elsevier BV
- Published
- 2022-07
- Volume
- 91
- Pages
- 100930
- ISSN
- 0360-1285 (ISSN-L)
- OpenAlex
- W4200111462
- Cited by
- 266
- References
- 517
- FWCI
- 20.91
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.