The DOI matches its Crossref record; 45 of the 45 references it cites were found in a registry or an index.
Current status of recycling of fibre reinforced polymers: Review of technologies, reuse and resulting properties
Open accessAbstract
A complete review of the different techniques that have been developed to recycle fibre reinforced polymers is presented. The review also focuses on the reuse of valuable products recovered by different techniques, in particular the way that fibres have been reincorporated into new materials or applications and the main technological issues encountered. Recycled glass fibres can replace small amounts of virgin fibres in products but not at high enough concentrations to make their recycling economically and environmentally viable, if for example, thermolysis or solvolysis is used. Reclaimed carbon fibres from high-technology applications cannot be reincorporated in the same applications from which they were recovered, so new appropriate applications have to be developed in order to reuse the fibres. Materials incorporating recycled fibres exhibit specific mechanical properties because of the particular characteristics imparted by the fibres. The development of specific standards is therefore necessary, as well as efforts in the development of solutions that enable reusers to benefit from their reinforcement potential. The recovery and reuse of valuable products from resins are also considered, but also the development of recyclable thermoset resins. Finally, the economic and environmental aspects of recycling composite materials, based on Life Cycle Assessment, are discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Roles of Water for Chemical Reactions in High-Temperature Water
Akiya, N., & Savage, P. E. (2002) · Chemical Reviews · doi:10.1021/cr000668w · Cited by 1,581
Recycling technologies for thermoset composite materials—current status
Pickering, S. J. (2006) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2005.05.030 · Cited by 1,278
Pimenta, S., & Pinho, S. T. (2011) · Waste Management · doi:10.1016/j.wasman.2010.09.019 · Cited by 967
Recycling of composite materials
Yang, Y., Boom, R., Irion, B., van Heerden, D.-J., Kuiper, P., & de Wit, H. (2012) · Chemical Engineering and Processing: Process Intensification · doi:10.1016/j.cep.2011.09.007 · Cited by 853
Corrosion in high-temperature and supercritical water and aqueous solutions: a review
Kritzer, P. (2004) · The Journal of Supercritical Fluids · doi:10.1016/s0896-8446(03)00031-7 · Cited by 660
Life cycle energy analysis of fiber-reinforced composites
Song, Y. S., Youn, J. R., & Gutowski, T. G. (2009) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2009.05.020 · Cited by 548
Witik, R. A., Teuscher, R., Michaud, V., Ludwig, C., & Månson, J.-A. E. (2013) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2013.02.009 · Cited by 408
Chemical recycling of carbon fibre reinforced composites in nearcritical and supercritical water
Piñero-Hernanz, R., Dodds, C., Hyde, J., García-Serna, J., Poliakoff, M., Lester, E., Cocero, M. J., Kingman, S., Pickering, S., & Wong, K. H. (2008) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2008.01.001 · Cited by 366
Successful closed-loop recycling of thermoset composites
Palmer, J., Ghita, O. R., Savage, L., & Evans, K. E. (2009) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2009.02.002 · Cited by 363
Piñero-Hernanz, R., García‐Serna, J., Dodds, C., Hyde, J. R., Poliakoff, M., Cocero, M. J., Kingman, S., Pickering, S. J., & Lester, E. H. (2008) · The Journal of Supercritical Fluids · doi:10.1016/j.supflu.2008.02.008 · Cited by 304
Hot compressed water as reaction medium and reactant
Kruse, A., & Dinjus, E. (2007) · The Journal of Supercritical Fluids · doi:10.1016/j.supflu.2006.12.006 · Cited by 302
Glycolysis of poly(ethylene terephthalate) catalyzed by ionic liquids
Wang, H., Liu, Y., Li, Z., Zhang, X., Zhang, S., & Zhang, Y. (2009) · European Polymer Journal · doi:10.1016/j.eurpolymj.2009.01.025 · Cited by 284
JIANG, G., PICKERING, S., LESTER, E., TURNER, T., WONG, K., & WARRIOR, N. (2009) · Composites Science and Technology · doi:10.1016/j.compscitech.2008.10.007 · Cited by 271
Morin, C., Loppinet-Serani, A., Cansell, F., & Aymonier, C. (2012) · The Journal of Supercritical Fluids · doi:10.1016/j.supflu.2012.02.001 · Cited by 246
Chemical recycling of glass fiber reinforced epoxy resin cured with amine using nitric acid
Dang, W., Kubouchi, M., Sembokuya, H., & Tsuda, K. (2005) · Polymer · doi:10.1016/j.polymer.2004.12.035 · Cited by 222
Bai, Y., Wang, Z., & Feng, L. (2010) · Materials & Design · doi:10.1016/j.matdes.2009.07.057 · Cited by 209
Xu, P., Li, J., & Ding, J. (2013) · Composites Science and Technology · doi:10.1016/j.compscitech.2013.04.002 · Cited by 208
Recycled carbon fibre-reinforced polypropylene thermoplastic composites
Akonda, M., Lawrence, C. A., & Weager, B. (2011) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2011.09.014 · Cited by 198
Li, J., Xu, P.-L., Zhu, Y.-K., Ding, J.-P., Xue, L.-X., & Wang, Y.-Z. (2012) · Green Chemistry · doi:10.1039/c2gc36294e · Cited by 196
An approach to chemical recycling of epoxy resin cured with amine using nitric acid
Dang, W., Kubouchi, M., Yamamoto, S., Sembokuya, H., & Tsuda, K. (2002) · Polymer · doi:10.1016/s0032-3861(02)00100-3 · Cited by 193
Liu, Y., Liu, J., Jiang, Z., & Tang, T. (2012) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2011.12.028 · Cited by 183
Lester, E., Kingman, S., Wong, K. H., Rudd, C., Pickering, S., & Hilal, N. (2004) · Materials Research Bulletin · doi:10.1016/j.materresbull.2004.04.031 · Cited by 182
Recycling of carbon fibre reinforced polymeric waste for the production of activated carbon fibres
Nahil, M. A., & Williams, P. T. (2011) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2011.01.005 · Cited by 171
Recycling of the fibrous fraction of reinforced thermoset composites
Kouparitsas, C. E., Kartalis, C. N., Varelidis, P. C., Tsenoglou, C. J., & Papaspyrides, C. D. (2002) · Polymer Composites · doi:10.1002/pc.10468 · Cited by 167
Recovery of carbon fibres by the thermolysis and gasification of waste prepreg
López, F. A., Rodríguez, O., Alguacil, F. J., García-Díaz, I., Centeno, T. A., Fierro, J. L. G., & González, C. (2013) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2013.04.012 · Cited by 166
Chemical recycling of glass fibre reinforced composites using subcritical water
Oliveux, G., Bailleul, J.-L., & Salle, E. L. G. L. (2012) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2012.06.008 · Cited by 160
Self-citationRecycling of carbon fibre reinforced composites using water in subcritical conditions
Yuyan, L., Guohua, S., & Linghui, M. (2009) · Materials Science and Engineering A · doi:10.1016/j.msea.2009.05.030 · Cited by 146
Kinetics of Depolymerization of Poly(ethylene terephthalate) in a Potassium Hydroxide Solution
Wan, B., Kao, C.-Y., & Cheng, W.-H. (2000) · Industrial & Engineering Chemistry Research · doi:10.1021/ie0005304 · Cited by 136
Recycling of fiber reinforced plastics using depolymerization by solvothermal reaction with catalyst
Iwaya, T., Tokuno, S., Sasaki, M., Goto, M., & Shibata, K. (2007) · Journal of Materials Science · doi:10.1007/s10853-007-2017-8 · Cited by 135
Supercritical propanol, a possible route to composite carbon fibre recovery: A viability study
Hyde, J. R., Lester, E. H., Kingman, S., Pickering, S. J., & Wong, K. H. (2006) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2005.12.006 · Cited by 130
Highly efficient solvolysis of epoxy resin using poly(ethylene glycol)/NaOH systems
Yang, P., Zhou, Q., Yuan, X., van Kasteren, J. M. N., & Wang, Y. (2012) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2012.04.007 · Cited by 128
Mechanical properties of ABS resin reinforced with recycled CFRP
Ogi, K., Nishikawa, T., Okano, Y., & Taketa, I. (2007) · Advanced Composite Materials · doi:10.1163/156855107780918982 · Cited by 117
Investigation on degradation of polyethylene to oils in supercritical water
Su, X., Zhao, Y., Zhang, R., & Bi, J. (2004) · Fuel Processing Technology · doi:10.1016/j.fuproc.2003.11.044 · Cited by 101
Solvolysis of bisphenol A diglycidyl ether/anhydride model networks
Gersifi, K. E., Durand, G., & Tersac, G. (2005) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2005.05.021 · Cited by 79
Hydrolysis and Oxidation of an Epoxy Resin in Sub- and Supercritical Water
Fromonteil, C., Bardelle, P., & Cansell, F. (2000) · Industrial & Engineering Chemistry Research · doi:10.1021/ie990093x · Cited by 79
Oliveux, G., Bailleul, J., Salle, E. L. G. L., Lefèvre, N., & Biotteau, G. (2012) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2012.12.010 · Cited by 76
Self-citationRecycling of unsaturated polyester resin using propylene glycol
Yoon, K. H., DiBenedetto, A. T., & Huang, S. J. (1997) · Polymer · doi:10.1016/s0032-3861(96)00951-2 · Cited by 68
On the recyclability of a cyclic thermoplastic composite material
Steenkamer, D. A., & Sullivan, J. L. (1998) · Composites Part B Engineering · doi:10.1016/s1359-8368(98)00016-x · Cited by 65
Model for End of Life Treatment of Polymer Composite Materials
Åström, A. H. (2005) · KTH Publication Database DiVA (KTH Royal Institute of Technology) · Cited by 64
Decomposition reactions of plastic model compounds in sub- and supercritical water
Shibasaki, Y., Kamimori, T., Kadokawa, J., Hatano, B., & Tagaya, H. (2003) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2003.09.010 · Cited by 53
Shibasaki, Y., Kadokawa, J., Tagaya, H., Hatano, B., & Kato, C. (2004) · Journal of Material Cycles and Waste Management · doi:10.1007/s10163-003-0098-2 · Cited by 48
Degradation of crosslinked unsaturated polyesters in sub-critical water
Suyama, K., Kubota, M., Shirai, M., & Yoshida, H. (2006) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2006.10.008 · Cited by 41
Blowey, R. W., & Edmondson, P. (2010) · CABI eBooks · doi:10.1079/9781845935504.0248 · Cited by 38
Suyama, K., Kubota, M., Shirai, M., & Yoshida, H. (2010) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2010.05.034 · Cited by 34
Onwudili, J. A., Yıldırır, E., & Williams, P. T. (2013) · Waste and Biomass Valorization · doi:10.1007/s12649-013-9204-4 · Cited by 29
Cited by
Recycling of plastic solid waste: A state of art review and future applications
Singh, N., Hui, D., Singh, R., Ahuja, I. P. S., Feo, L., & Fraternali, F. (2017) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2016.09.013 · Cited by 1,211
Plastic Waste: Challenges and Opportunities to Mitigate Pollution and Effective Management
Kibria, M. G., Masuk, N. I., Safayet, R., Nguyen, H. Q., & Mourshed, M. (2023) · International Journal of Environmental Research · doi:10.1007/s41742-023-00507-z · Cited by 884
Taynton, P., Ni, H., Zhu, C., Yu, K., Loob, S., Jin, Y., Qi, H. J., & Zhang, W. (2016) · Advanced Materials · doi:10.1002/adma.201505245 · Cited by 681
Zhang, Z. P., Rong, M. Z., & Zhang, M. Q. (2018) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2018.03.002 · Cited by 586
Current technologies for plastic waste treatment: A review
Zhang, F., Zhao, Y., Wang, D., Yan, M., Zhang, J., Zhang, P., Ding, T., Chen, L., & Chen, C. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.124523 · Cited by 532
Metadata
- Authors
- Oliveux, G., Dandy, L. O., & Leeke, G. A.
- Venue
- Progress in Materials Science
- Publisher
- Elsevier BV
- Published
- 2015-07
- Volume
- 72
- Pages
- 61-99
- ISSN
- 0079-6425 (ISSN-L)
- OpenAlex
- W2008083565
- Cited by
- 1,287
- References
- 45
- FWCI
- 51.00
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.