PAN precursor fabrication, applications and thermal stabilization process in carbon fiber production: Experimental and mathematical modelling
Open accessThe DOI matches its Crossref record; 85 of the 85 references it cites were found in a registry or an index.
Abstract
Abstract Polyacrylonitrile (PAN) is a versatile man-made polymer and has been used in a large array of products since its first mass production in the mid 40s. Among all applications of PAN the widely used application is in manufacture of precursor fiber for fabrication of carbon fibers. The process of PAN-based carbon fiber production comprises fiber spinning, thermal stabilization and carbonization stages. Carbon fiber properties are significantly dependent on the quality of PAN precursor fiber and in particular the process parameters involved in thermal stabilization. This paper is the first comprehensive review that provides a general understanding of the links between PAN fiber structure, properties, and its stabilization process along with the use of mathematical modelling as a powerful tool in prediction and optimization of the processes involved. Since the promise of the mathematical modelling is to predict the future behaviour of the system and the value of the variables for the unseen or unmeasured domain of variables; and in the era of industry 4.0 rise, this review will be valuable in further understanding of the intricate processes of carbon fiber manufacture and utilising the advanced mathematical modelling using machine learning techniques to predict and optimize a range of critical factors that control the quality of PAN and resultant carbon fibers.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Reaction Kinetics in Differential Thermal Analysis
Kissinger, H. E. (1957) · Analytical Chemistry · doi:10.1021/ac60131a045 · Cited by 13,196
An Introduction to Genetic Algorithms
Mitchell, M. (1996) · doi:10.7551/mitpress/3927.001.0001 · Cited by 11,340
Levenspiel, O. (1999) · Industrial & Engineering Chemistry Research · doi:10.1021/ie990488g · Cited by 9,970
Insights into the modeling of adsorption isotherm systems
Foo, K. Y., & Hameed, B. H. (2010) · Chemical Engineering Journal · doi:10.1016/j.cej.2009.09.013 · Cited by 8,479
A New Method of Analyzing Thermogravimetric Data
Ozawa, T. (1965) · Bulletin of the Chemical Society of Japan · doi:10.1246/bcsj.38.1881 · Cited by 6,911
Molecular thermodynamics of fluid-phase equilibria
Rowlinson, J. S. (1970) · The Journal of Chemical Thermodynamics · doi:10.1016/0021-9614(70)90078-9 · Cited by 5,424
Molecular Thermodynamics of Fluid-Phase Equilibria
Prausnitz, J. M., Lichtenthaler, R. N., & de Azevedo, E. G. (1969) · Cited by 3,983
Variation of peak temperature with heating rate in differential thermal analysis
Kissinger, H. E. (1956) · Journal of Research of the National Bureau of Standards · doi:10.6028/jres.057.026 · Cited by 3,924
A quick, direct method for the determination of activation energy from thermogravimetric data
Flynn, J. H., & Wall, L. A. (1966) · Journal of Polymer Science Part B: Polymer Letters · doi:10.1002/pol.1966.110040504 · Cited by 3,228
Handbook of Bond Dissociation Energies in Organic Compounds
Luo, Y.-R. (2002) · CRC Press eBooks · doi:10.1201/9781420039863 · Cited by 1,533
A review of heat treatment on polyacrylonitrile fiber
Rahaman, M. S. A., Ismail, A. F., & Mustafa, A. (2007) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2007.03.023 · Cited by 1,412
Kinetic analysis of thermogravimetric data
Doyle, C. D. (1961) · Journal of Applied Polymer Science · doi:10.1002/app.1961.070051506 · Cited by 1,357
Carbon Fibers and Their Composites
Morgan, P. (2005) · CRC Press eBooks · doi:10.1201/9781420028744 · Cited by 1,200
An introduction to genetic algorithms
Deb, K. (1999) · Sadhana · doi:10.1007/bf02823145 · Cited by 1,176
Estimating isothermal life from thermogravimetric data
Doyle, C. D. (1962) · Journal of Applied Polymer Science · doi:10.1002/app.1962.070062406 · Cited by 1,078
Carbon Fibers: Precursor Systems, Processing, Structure, and Properties
Frank, E., Steudle, L. M., Ingildeev, D., Spörl, J. M., & Buchmeiser, M. R. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201306129 · Cited by 970
Fabrication and Properties of Carbon Fibers
Huang, X. (2009) · Materials · doi:10.3390/ma2042369 · Cited by 969
Review Carbon fibers for composites
Chand, S. (2000) · Journal of Materials Science · doi:10.1023/a:1004780301489 · Cited by 916
Handbook of bond dissociation energies in organic compounds
(2003) · Choice Reviews Online · doi:10.5860/choice.40-5818 · Cited by 732
The effect of processing on the structure and properties of carbon fibers
Edie, D. D. (1998) · Carbon · doi:10.1016/s0008-6223(97)00185-1 · Cited by 617
Review of polymer oxidation and its relationship with materials performance and lifetime prediction
Celina, M. C. (2013) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2013.06.024 · Cited by 595
Carbon fiber reinforced metal matrix composites: Fabrication processes and properties
Shirvanimoghaddam, K., Hamim, S. U., Karbalaei Akbari, M., Fakhrhoseini, S. M., Khayyam, H., Pakseresht, A. H., Ghasali, E., Zabet, M., Munir, K. S., Jia, S., et al. (2017) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2016.10.032 · Cited by 574
Self-citationNonlinear model predictive control: current status and future directions
Henson, M. A. (1998) · Computers & Chemical Engineering · doi:10.1016/s0098-1354(98)00260-9 · Cited by 573
Evolution of structure and properties of PAN precursors during their conversion to carbon fibers
Wangxi, Z., Jie, L., & Gang, W. (2003) · Carbon · doi:10.1016/s0008-6223(03)00391-9 · Cited by 487
Kinetic Analysis Using Multivariate Non-linear Regression. I. Basic concepts
Opfermann, J. (2000) · Journal of Thermal Analysis and Calorimetry · doi:10.1023/a:1010167626551 · Cited by 479
Saeed, K., Haider, S., Oh, T., & Park, S. (2008) · Journal of Membrane Science · doi:10.1016/j.memsci.2008.05.062 · Cited by 475
Selection of Proper Neural Network Sizes and Architectures—A Comparative Study
Hunter, D., Yu, H., Pukish, III, Kolbusz, J., & Wilamowski, B. M. (2012) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2012.2187914 · Cited by 415
Photocatalytic reduction of graphene oxides hybridized by ZnO nanoparticles in ethanol
Akhavan, O. (2011) · Carbon · doi:10.1016/j.carbon.2010.08.030 · Cited by 385
Kampalanonwat, P., & Supaphol, P. (2010) · ACS Applied Materials & Interfaces · doi:10.1021/am1008024 · Cited by 382
Yusof, N., & Ismail, A. F. (2012) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2011.10.001 · Cited by 374
Thermal stabilization of polyacrylonitrile fibres
Dalton, S., Heatley, F., & Budd, P. M. (1999) · Polymer · doi:10.1016/s0032-3861(98)00778-2 · Cited by 372
High power supercapacitors using polyacrylonitrile-based carbon nanofiber paper
Ra, E., Raymundo‐Piñero, E., Lee, Y. H., & Béguin, F. (2009) · Carbon · doi:10.1016/j.carbon.2009.06.051 · Cited by 357
(1978) · Composites · doi:10.1016/0010-4361(78)90646-8 · Cited by 333
Neghlani, P. K., Rafizadeh, M., & Taromi, F. A. (2010) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2010.10.121 · Cited by 333
Nanoparticle filtration by electrospun polymer fibers
Yun, K. M., Hogan, C. J., Matsubayashi, Y., Kawabe, M., Iskandar, F., & Okuyama, K. (2007) · Chemical Engineering Science · doi:10.1016/j.ces.2007.06.007 · Cited by 293
Kermani, B. G., Schiffman, S. S., & Nagle, H. T. (2005) · Sensors and Actuators B: Chemical · doi:10.1016/j.snb.2005.01.008 · Cited by 279
Inverse gas chromatography applications: A review
Mohammadi-Jam, S., & Waters, K. E. (2014) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2014.07.002 · Cited by 275
Wang, N., Si, Y., Wang, N., Sun, G. Z., El-Newehy, M. H., Al‐Deyab, S. S., & Ding, B. (2014) · Separation and Purification Technology · doi:10.1016/j.seppur.2014.02.017 · Cited by 266
Baker, D. A., Gallego, N. C., & Baker, F. S. (2012) · Journal of Applied Polymer Science · doi:10.1002/app.33596 · Cited by 258
Lee, K. J., Shiratori, N., Lee, G. H., Miyawaki, J., Mochida, I., Yoon, S.-H., & Jang, J. (2010) · Carbon · doi:10.1016/j.carbon.2010.07.034 · Cited by 249
Yang, X., Wu, D., Chen, X., & Fu, R. (2010) · The Journal of Physical Chemistry C · doi:10.1021/jp101255d · Cited by 247
Effect of fibre microstructure upon the modulus of PAN- and pitch-based carbon fibres
Huang, Y. C., & Young, R. J. (1995) · Carbon · doi:10.1016/0008-6223(94)00109-d · Cited by 241
Model-Integrated Mechatronics—Toward a New Paradigm in the Development of Manufacturing Systems
Thramboulidis, K. (2005) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2005.844427 · Cited by 200
Efficient Lewis Acid-Catalyzed Stereocontrolled Radical Polymerization of Acrylamides
Isobe, Y., Fujioka, D., Habaue, S., & Okamoto, Y. (2001) · Journal of the American Chemical Society · doi:10.1021/ja015888l · Cited by 199
Thermal protective performance of protective clothing used for low radiant heat protection
Song, G., Paskaluk, S. A., Sati, R., Crown, E. M., Dale, J. D., & Ackerman, M. Y. (2010) · Textile Research Journal · doi:10.1177/0040517510380108 · Cited by 197
Zhang, S., Tang, N., Cao, L., Yin, X., Yu, J., & Ding, B. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b10094 · Cited by 195
New methods for evaluating kinetic parameters from thermal analysis data
Friedman, H. L. (1969) · Journal of Polymer Science Part B Polymer Letters · doi:10.1002/pol.1969.110070109 · Cited by 194
Matulevicius, J., Kliucininkas, L., Prasauskas, T., Buivydiene, D., & Martuzevicius, D. (2016) · Journal of Aerosol Science · doi:10.1016/j.jaerosci.2015.10.006 · Cited by 189
David, L. I. B., & Ismail, A. F. (2003) · Journal of Membrane Science · doi:10.1016/s0376-7388(02)00513-6 · Cited by 175
Mechanism of oxidisation of polyacrylonitrile fibres
WATT, W., & JOHNSON, W. (1975) · Nature · doi:10.1038/257210a0 · Cited by 171
Sheng, J., Zhang, M., Xu, Y., Yu, J., & Ding, B. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b09392 · Cited by 162
Copper/zinc bimetal nanoparticles-dispersed carbon nanofibers: A novel potential antibiotic material
Ashfaq, M., Verma, N., & Khan, S. (2015) · Materials Science and Engineering C · doi:10.1016/j.msec.2015.10.079 · Cited by 154
X-ray studies on the structure of polyacrylonitrile fibers
Liu, X. D., & Ruland, W. (1993) · Macromolecules · doi:10.1021/ma00064a006 · Cited by 135
Molecular interactions and macroscopic properties of polyacrylonitrile and model substances
Henrici-Olivé, G., & Olivé, S. (1979) · Advances in polymer science · doi:10.1007/3-540-09442-3_6 · Cited by 129
Chaúque, E. F. C., Dlamini, L. N., Adelodun, A. A., Greyling, C. J., & Ngila, J. C. (2016) · Applied Surface Science · doi:10.1016/j.apsusc.2016.02.018 · Cited by 127
Model-free kinetic analysis of melamine–formaldehyde resin cure
Kandelbauer, A., Wuzella, G., Mahendran, A. R., Taudes, I., & Widsten, P. (2009) · Chemical Engineering Journal · doi:10.1016/j.cej.2009.05.027 · Cited by 121
Kampalanonwat, P., & Supaphol, P. (2014) · Energy Procedia · doi:10.1016/j.egypro.2014.07.142 · Cited by 116
Intermolecular association in organic nitriles; the CN dipole‐pair bond
Saum, A. M. (1960) · Journal of Polymer Science · doi:10.1002/pol.1960.1204213907 · Cited by 109
Oxidative stabilization of acrylic fibres: Part 3 Morphology of polyacrylonitrile
Warner, S. B., UHLMANN, D. R., & Peebles, L. H. (1979) · Journal of Materials Science · doi:10.1007/bf00551029 · Cited by 108
Hong, G., Li, X., Shen, L., Wang, M., Wang, C., Yu, X., & Wang, X. (2015) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2015.04.020 · Cited by 104
Lai, C., Zhong, G., Yue, Z., Chen, G., Zhang, L., Vakili, A. D., Wang, Y., Zhu, L. J., Liu, J., & Fong, H. (2010) · Polymer · doi:10.1016/j.polymer.2010.11.044 · Cited by 103
Fire-Resistant Hydrogel-Fabric Laminates: A Simple Concept That May Save Lives
Illeperuma, W. R. K., Rothemund, P., Suo, Z., & Vlassak, J. J. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b10538 · Cited by 102
Crystalline structure of atactic polyacrylonitrile
Hobson, R. J., & Windle, A. H. (1993) · Macromolecules · doi:10.1021/ma00077a030 · Cited by 96
Post-draw PAN–PMMA nanofiber reinforced and toughened Bis-GMA dental restorative composite
Sun, W., Cai, Q., Li, P., Deng, X., Wei, Y. Q., Xu, M., & Yang, X. (2010) · Dental Materials · doi:10.1016/j.dental.2010.03.022 · Cited by 91
CFD modeling of heat transfer and flow field in a bakery pilot oven
Boulet, M., Marcos, B., Dostie, M., & Moresoli, C. (2009) · Journal of Food Engineering · doi:10.1016/j.jfoodeng.2009.10.034 · Cited by 84
Golcarenarenji, G., Naebe, M., Badii, K., Milani, A. S., Jazar, R. N., & Khayyam, H. (2017) · Computers & Chemical Engineering · doi:10.1016/j.compchemeng.2017.11.020 · Cited by 78
Self-citationKhayyam, H., Naebe, M., Zabihi, O., Zamani, R., Atkiss, S., & Fox, B. L. (2015) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2015.2434329 · Cited by 77
Self-citationA machine learning case study with limited data for prediction of carbon fiber mechanical properties
Golcarenarenji, G., Naebe, M., Badii, K., Milani, A. S., Jazar, R. N., & Khayyam, H. (2018) · Computers in Industry · doi:10.1016/j.compind.2018.11.004 · Cited by 70
Self-citationBadii, K., Church, J. S., Golkarnarenji, G., Naebe, M., & Khayyam, H. (2016) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2016.06.019 · Cited by 69
Self-citationElectrospun polyacrylonitrile nanofibers functionalized with EDTA for adsorption of ionic dyes
Chaúque, E. F. C., Dlamini, L. N., Adelodun, A. A., Greyling, C. J., & Ngila, J. C. (2016) · Physics and Chemistry of the Earth Parts A/B/C · doi:10.1016/j.pce.2016.10.008 · Cited by 57
Dynamic optimization of chemical engineering processes by an evolutionary method
Pham, Q. T. (1998) · Computers & Chemical Engineering · doi:10.1016/s0098-1354(97)00265-2 · Cited by 56
Penedo, F., Haber, R. E., Gajate, A., & del Toro, R. M. (2012) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2012.2205699 · Cited by 53
Liu, J., Chen, G., Gao, H., Zhang, L., Ma, S., Liang, J., & Fong, H. (2011) · Carbon · doi:10.1016/j.carbon.2011.10.046 · Cited by 51
Modelling and simulation in chemical engineering: Tools for process innovation
Rodrigues, A. E., & Minceva, M. (2005) · Computers & Chemical Engineering · doi:10.1016/j.compchemeng.2005.02.029 · Cited by 48
Chauhan, D., Afreen, S., Mishra, S., & Sankararamakrishnan, N. (2017) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2017.06.027 · Cited by 46
Arbab, S., & Zeinolebadi, A. (2017) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2017.04.003 · Cited by 42
Production of Low Cost Carbon-Fiber through Energy Optimization of Stabilization Process
Golcarenarenji, G., Naebe, M., Badii, K., Milani, A. S., Jazar, R. N., & Khayyam, H. (2018) · Materials · doi:10.3390/ma11030385 · Cited by 37
Self-citationSabet, E. N., Nourpanah, P., & Arbab, S. (2016) · Polymer · doi:10.1016/j.polymer.2016.03.001 · Cited by 29
Polymer Precursor-Derived Carbon
Naskar, A. K., & Hoffman, W. P. (2014) · ACS symposium series · doi:10.1021/bk-2014-1173 · Cited by 23
Ding, Y., Liang, X. G., Hao, K., & Wang, H. (2012) · IEEE Transactions on Control Systems Technology · doi:10.1109/tcst.2012.2186454 · Cited by 18
The preparation of isotactic polyacrylonitrile using zeolite
Jung, K. T., Hwang, D. K., Shul, Y., Han, H. S., & Lee, W. S. (2002) · Materials Letters · doi:10.1016/s0167-577x(01)00473-6 · Cited by 17
Limited Data Modelling Approaches for Engineering Applications
Khayyam, H., Golkarnarenji, G., & Jazar, R. N. (2018) · Springer eBooks · doi:10.1007/978-3-319-69480-1_12 · Cited by 17
Self-citationGenetic Programming Approaches in Design and Optimization of Mechanical Engineering Applications
Khayyam, H., Jamali, A., Assimi, H., & Jazar, R. N. (2019) · Springer eBooks · doi:10.1007/978-3-030-18963-1_9 · Cited by 16
Self-citationKrishnan, G. S., Burkanudeen, A. R., Murali, N., & Phadnis, H. (2012) · eXPRESS Polymer Letters · doi:10.3144/expresspolymlett.2012.78 · Cited by 14
Choi, Y. H. (2010) · SMARTech Repository (Georgia Institute of Technology) · Cited by 11
Cited by
Hassan, M. F., Sabri, M. A., Fazal, H., Hafeez, A., Shezad, N., & Hussain, M. (2020) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2019.104715 · Cited by 305
Porous Conductive Textiles for Wearable Electronics
Ding, Y., Jiang, J., Wu, Y., Zhang, Y., Zhou, J., Zhang, Y., Huang, Q., & Zheng, Z. (2024) · Chemical Reviews · doi:10.1021/acs.chemrev.3c00507 · Cited by 269
Metadata
- Authors
- Khayyam, H., Jazar, R. N., Nunna, S., Golkarnarenji, G., Badii, K., Fakhrhoseini, S. M., Kumar, S., & Naebe, M.
- Venue
- Progress in Materials Science
- Publisher
- Elsevier BV
- Published
- 2020-01
- Volume
- 107
- Pages
- 100575
- ISSN
- 0079-6425 (ISSN-L)
- OpenAlex
- W2949920894
- Cited by
- 325
- References
- 85
- FWCI
- 17.86
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.