Sustainability through alloy design: Challenges and opportunities

The scandium effect in multicomponent alloys

Riva, S., Yusenko, K. V., Lavery, N., Jarvis, D. J., & Brown, S. G. R. (2016) · International Materials Reviews · doi:10.1080/09506608.2015.1137692 · Cited by 129

Casting alloys of the Al–Ce–Ni system: microstructural approach to alloy design

Белов, Н. А., Наумова, Е. А., & Eskin, D. G. (1999) · Materials Science and Engineering A · doi:10.1016/s0921-5093(99)00343-3 · Cited by 128

Precipitation evolution in Al–Er–Zr alloys during aging at elevated temperature

Wen, S., Gao, K., Huang, H., Wang, W., & Nie, Z. (2013) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2013.03.237 · Cited by 127

Segregation-Assisted Plasticity in Ni-Based Superalloys

Barba, D., Smith, T. M., Miao, J., Mills, M. J., & Reed, R. C. (2018) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-018-4567-6 · Cited by 127

Multifunctional coating interlayers for thermal-barrier systems

Pollock, T. M., Lipkin, D. M., & Hemker, K. J. (2012) · MRS Bulletin · doi:10.1557/mrs.2012.238 · Cited by 125

Comparative study of hydrogen embrittlement in stable and metastable high-entropy alloys

Ichii, K., Koyama, M., Taşan, C. C., & Tsuzaki, K. (2018) · Scripta Materialia · doi:10.1016/j.scriptamat.2018.03.003 · Cited by 125

Strengthening mechanisms in Al Ni Sc alloys containing Al3Ni microfibers and Al3Sc nanoprecipitates

Suwanpreecha, C., Toinin, J. P., Michi, R. A., Pandee, P., Dunand, D. C., & Limmaneevichitr, C. (2018) · Acta Materialia · doi:10.1016/j.actamat.2018.10.059 · Cited by 124

Creep deformation-induced antiphase boundaries in L1 2 -containing single-crystal cobalt-base superalloys

Eggeler, Y. M., Titus, M. S., Suzuki, A., & Pollock, T. M. (2014) · Acta Materialia · doi:10.1016/j.actamat.2014.04.037 · Cited by 122

New strategies and tests to accelerate discovery and development of multi-principal element structural alloys

Miracle, D. B., Majumdar, B. S., Wertz, K. N., & Gorsse, S. (2016) · Scripta Materialia · doi:10.1016/j.scriptamat.2016.08.001 · Cited by 122

High-Throughput Solid Solution Strengthening Characterization in High Entropy AlloysPreprint

Coury, F. G., Wilson, P., Clarke, K. D., Kaufman, M. J., & Clarke, A. J. (2018) · SSRN Electronic Journal · doi:10.2139/ssrn.3301208 · Cited by 122

Designing duplex, ultrafine-grained Fe-Mn-Al-C steels by tuning phase transformation and recrystallization kinetics

Zhang, J.-L., Raabe, D., & Taşan, C. C. (2017) · Acta Materialia · doi:10.1016/j.actamat.2017.09.026 · Cited by 121

Reusing Steel and Aluminum Components at End of Product Life

Cooper, D. R., & Allwood, J. M. (2012) · Environmental Science & Technology · doi:10.1021/es301093a · Cited by 118

SiC-Matrix Composite Materials for Advanced Jet Engines

Naslain, R. R., & Christin, F. (2003) · MRS Bulletin · doi:10.1557/mrs2003.193 · Cited by 118

Precipitation crystallography of plate-shaped Al6(Mn,Fe) dispersoids in AA5182 alloy

Li, Y., Zhang, W. Z., & Marthinsen, K. (2012) · Acta Materialia · doi:10.1016/j.actamat.2012.06.022 · Cited by 117

Applying the texture analysis for optimizing thermomechanical treatment of high manganese twinning-induced plasticity steel

Haase, C., Barrales-Mora, L. A., Roters, F., Molodov, D. A., & Gottstein, G. (2014) · Acta Materialia · doi:10.1016/j.actamat.2014.07.068 · Cited by 116

Precipitation evolution and coarsening resistance at 400°C of Al microalloyed with Zr and Er

Li, H., Bin, J., Liu, J., Gao, Z., & Lu, X. (2012) · Scripta Materialia · doi:10.1016/j.scriptamat.2012.03.026 · Cited by 114

Modeling the creep threshold stress due to climb of a dislocation in the stress field of a misfitting precipitate

Krug, M. E., & Dunand, D. C. (2011) · Acta Materialia · doi:10.1016/j.actamat.2011.04.044 · Cited by 112

Interaction between molybdenum and manganese to form effective dispersoids in an Al–Si–Cu–Mg alloy and their influence on creep resistance

Farkoosh, A. R., Chen, X. G., & Pekguleryuz, M. (2015) · Materials Science and Engineering A · doi:10.1016/j.msea.2014.12.115 · Cited by 111

The shape memory mechanism in 18R martensitic alloys

Saburi, T., Wayman, C. M., Takata, K., & Nenno, S. (1980) · Acta Metallurgica · doi:10.1016/0001-6160(80)90037-1 · Cited by 110

The omnivorous diet of modern technology

Greenfield, A., & Graedel, T. E. (2013) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2013.02.010 · Cited by 109

Experimental analysis of strain path dependent ductile damage mechanics and forming limits

Taşan, C. C., Hoefnagels, J. P. M., ten Horn, C. H. L. J., & Geers, M. G. D. (2009) · Mechanics of Materials · doi:10.1016/j.mechmat.2009.08.003 · Cited by 109

First-principles calculations of stacking fault energies in Mg-Y, Mg-Al and Mg-Zn alloys and implications for 〈 c + a 〉 activity

Yin, B., Wu, Z., & Curtin, W. A. (2017) · Acta Materialia · doi:10.1016/j.actamat.2017.06.062 · Cited by 109

Local atomic arrangements in binary alloys

Schönfeld, B. (1999) · Progress in Materials Science · doi:10.1016/s0079-6425(99)00005-5 · Cited by 108

Kinetics of precipitation in AlSc alloys and low temperature solid solubility of scandium in aluminium studied by electrical resistivity measurements

Jo, H., & FUJIKAWA, S.-I. (1993) · Materials Science and Engineering A · doi:10.1016/0921-5093(93)90401-y · Cited by 108

Enhancing Hydrogen Embrittlement Resistance of Lath Martensite by Introducing Nano-Films of Interlath Austenite

Wang, M., Taşan, C. C., Koyama, M., Ponge, D., & Raabe, D. (2015) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-015-3009-y · Cited by 105

Boundary micro-cracking in metastable Fe45Mn35Co10Cr10 high-entropy alloys

Wei, S., Kim, J., & Taşan, C. C. (2019) · Acta Materialia · doi:10.1016/j.actamat.2019.01.036 · Cited by 103

The shear fracture of dual-phase steel

Kim, J. H., Sung, J. H., Piao, K., & WAGONER, R. H. (2011) · International Journal of Plasticity · doi:10.1016/j.ijplas.2011.02.009 · Cited by 102

Mechanical properties and optimization of the aging of a dilute Al-Sc-Er-Zr-Si alloy with a high Zr/Sc ratio

Luca, A. D., Dunand, D. C., & Seidman, D. N. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.08.018 · Cited by 102

Effects of Mo and Mn microadditions on strengthening and over-aging resistance of nanoprecipitation-strengthened Al-Zr-Sc-Er-Si alloys

Luca, A. D., Seidman, D. N., & Dunand, D. C. (2018) · Acta Materialia · doi:10.1016/j.actamat.2018.11.031 · Cited by 100

Effect of the cutting process on the fatigue behaviour of press hardened and high strength dual phase steels

Lara, A., Picas, I., & Casellas, D. (2013) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2013.05.003 · Cited by 99

{112}〈111〉 Twinning during ω to body-centered cubic transition

Wu, S. Q., Ping, D., Yamabe‐Mitarai, Y., Xiao, W., Yang, Y., Hu, Q., Li, G. P., & Yang, R. (2013) · Acta Materialia · doi:10.1016/j.actamat.2013.09.040 · Cited by 98

In situ small-angle scattering study of the precipitation kinetics in an Al–Zr–Sc alloy

Deschamps, A., Lae, L., & Guyot, P. (2007) · Acta Materialia · doi:10.1016/j.actamat.2006.12.015 · Cited by 98

Creep behavior in a γ′ strengthened Co–Al–W–Ta–Ti single-crystal alloy at 1000 °C

Xue, F., Zhou, H., Shi, Q., Chen, X., Chang, H., Wang, M. L., & Feng, Q. C. (2014) · Scripta Materialia · doi:10.1016/j.scriptamat.2014.10.015 · Cited by 96

First-principles study of Co3(Al,W) alloys using special quasi-random structures

Jiang, C. (2008) · Scripta Materialia · doi:10.1016/j.scriptamat.2008.07.021 · Cited by 92

Effect of Al, Ti and Cr additions on the γ-γ’ microstructure of W-free Co-Ta-V-Based superalloys

Tirado, F. L. R., Taylor, S. V., & Dunand, D. C. (2019) · Acta Materialia · doi:10.1016/j.actamat.2019.04.031 · Cited by 92

Effect of homogenization and alloying elements on recrystallization resistance of Al–Zr–Mn alloys

Jia, Z., Hu, G., Forbord, B., & Solberg, J. K. (2006) · Materials Science and Engineering A · doi:10.1016/j.msea.2006.08.097 · Cited by 91

Ordered ω phases in a 4Zr–4Nb-containing TiAl-based alloy

Huang, Z. W. (2008) · Acta Materialia · doi:10.1016/j.actamat.2007.12.013 · Cited by 91

Options to make steel reuse profitable: An analysis of cost and risk distribution across the UK construction value chain

Dunant, C. F., Drewniok, M. P., Sansom, M., Corbey, S., Cullen, J. M., & Allwood, J. M. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.02.141 · Cited by 91

Strengthening mechanisms in aluminum containing coherent Al3Sc precipitates and incoherent Al2O3 dispersoids

Karnesky, R. A., Meng, L., & Dunand, D. C. (2006) · Acta Materialia · doi:10.1016/j.actamat.2006.10.004 · Cited by 90

Dendritic evolution during coarsening of Mg-Zn alloys via 4D synchrotron tomography

Guo, E., Phillion, A. B., Cai, B., Shuai, S., Kazantsev, D., Jing, T., & Lee, P. D. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.10.022 · Cited by 90

Compatible strain evolution in two phases due to epsilon martensite transformation in duplex TRIP-assisted stainless steels with high hydrogen embrittlement resistance

Li, Y., Li, W., Hu, J., Song, H. M., & Jin, X. (2016) · International Journal of Plasticity · doi:10.1016/j.ijplas.2016.09.012 · Cited by 90

Role of silicon in the precipitation kinetics of dilute Al-Sc-Er-Zr alloys

Vo, N. Q., Dunand, D. C., & Seidman, D. N. (2016) · Materials Science and Engineering A · doi:10.1016/j.msea.2016.09.065 · Cited by 89

Numerical modeling of an active elastocaloric regenerator refrigerator with phase transformation kinetics and the matching principle for materials selection

Qian, S., Yuan, L., Yu, J., & Yan, G. (2017) · Energy · doi:10.1016/j.energy.2017.09.116 · Cited by 89

Observations of Facet Formation in Near-a Titanium and Comments on the Role of Hydrogen

Pilchak, A. L., & Williams, J. C. (2010) · doi:10.21236/ada532477 · Cited by 88

In Situ Observation of Various Phase Transformation Paths in Nb‐Rich TiAl Alloys during Quenching with Different Rates

Stark, A., Oehring, M., Pyczak, F., & Schreyer, A. G. (2011) · Advanced Engineering Materials · doi:10.1002/adem.201000289 · Cited by 87

Metallurgical aspects of steels designed to resist abrasion, and impact-abrasion wear

Chintha, A. R. (2019) · Materials Science and Technology · doi:10.1080/02670836.2019.1615669 · Cited by 86

An 8 K elastocaloric temperature change induced by 1.3% transformation strain in Ni44Mn45−Sn11Cu alloys

Li, Y., Sun, W. R., Zhao, D., Xu, H., & Liu, J. (2016) · Scripta Materialia · doi:10.1016/j.scriptamat.2016.12.014 · Cited by 85

A computational high-throughput search for new ternary superalloys

Nyshadham, C., Oses, C., Hansen, J., Takeuchi, I., Stefano Curtarolo, A., & Hart, G. L. W. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.09.017 · Cited by 84

Effect of vanadium micro-alloying on the microstructural evolution and creep behavior of Al-Er-Sc-Zr-Si alloys

Erdeniz, D., Nasim, W., Malik, J., Yost, A. R., Park, S., Luca, A. D., Vo, N. Q., Karaman, İ., Mansoor, B., Seidman, D. N., et al. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.11.033 · Cited by 83

Equal-Channel Angular Extrusion of a Low-Density High-Entropy Alloy Produced by High-Energy Cryogenic Mechanical Alloying

Hammond, V. H., Atwater, M. A., Darling, K. A., Nguyen, H. Q., & Kecskes, L. J. (2014) · JOM · doi:10.1007/s11837-014-1113-x · Cited by 82

Single-crystal solidification of new Co–Al–W-base alloys

Tsunekane, M., Suzuki, A., & Pollock, T. M. (2011) · Intermetallics · doi:10.1016/j.intermet.2010.12.018 · Cited by 82

Microstructural effects on strain rate and dwell sensitivity in dual-phase titanium alloys

Waheed, S., Zheng, Z., Balint, D. S., & Dunne, F. P. E. (2018) · Acta Materialia · doi:10.1016/j.actamat.2018.09.035 · Cited by 82

Significant steps in ship recycling vis-a-vis wastes generated in a cluster of yards in Alang: a case study

Hiremath, A. M., Tilwankar, A. K., & Asolekar, S. R. (2014) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2014.09.031 · Cited by 80

Low-cycle dwell-time fatigue in Ti-6242

Kassner, M. E., Kosaka, Y., & Hall, J. S. (1999) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-999-0246-y · Cited by 79

A review and analysis of the elasto-caloric effect for solidstate refrigeration devices: Challenges and opportunities

Chauhan, A., Patel, S., Vaish, R., & Bowen, C. (2015) · MRS Energy & Sustainability · doi:10.1557/mre.2015.17 · Cited by 79

Dwell fatigue in two Ti alloys: An integrated crystal plasticity and discrete dislocation study

Zheng, Z., Balint, D. S., & Dunne, F. P. E. (2016) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2016.08.008 · Cited by 79

Unraveling Recrystallization Mechanisms Governing Texture Development from Rare-Earth Element Additions to Magnesium

Imandoust, A., Barrett, C. D., Al‐Samman, T., Tschopp, M. A., Essadiqi, E., Hort, N., & Kadiri, H. E. (2018) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-018-4520-8 · Cited by 79

Creep resistance of cast and aged Al–0.1Zr and Al–0.1Zr–0.1Ti (at.%) alloys at 300–400°C

Knipling, K. E., & Dunand, D. C. (2008) · Scripta Materialia · doi:10.1016/j.scriptamat.2008.02.059 · Cited by 78

Effect of Cr addition on γ–γ′ cobalt-based Co–Mo–Al–Ta class of superalloys: a combined experimental and computational study

Nithin, B., Samanta, A., Makineni, S. K., Alam, T., Pandey, P., Singh, A. K., Banerjee, R., & Chattopadhyay, K. (2017) · Journal of Materials Science · doi:10.1007/s10853-017-1159-6 · Cited by 78

Potential for energy savings by heat recovery in an integrated steel supply chain

McBrien, M., Serrenho, A. C., & Allwood, J. M. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.04.099 · Cited by 77

Martensite size effects on damage in quenching and partitioning steels

Wang, M.-M., Hell, J.-C., & Taşan, C. C. (2017) · Scripta Materialia · doi:10.1016/j.scriptamat.2017.05.021 · Cited by 77

Microscale plastic strain heterogeneity in slip dominated deformation of magnesium alloy containing rare earth

Martin, G., Sinclair, C. W., & Lebensohn, R. A. (2014) · Materials Science and Engineering A · doi:10.1016/j.msea.2014.01.102 · Cited by 75

Environmental Risks and Challenges of Anthropogenic Metals Flows and Cycles, A Report of the Working Group on the Global Metal Flows to the International Resource Panel.

van der Voet, E., Салминен, Р., Eckelman, M. J., Mudd, G. M., Norgate, T. E., & Hisschier, R. (2013) · Rivm Repository (Netherlands National Institute for Public Health and the Environment) · Cited by 75

Atomistic simulations of the interaction of alloying elements with grain boundaries in Mg

Huber, L., Rottler, J., & Militzer, M. (2014) · Acta Materialia · doi:10.1016/j.actamat.2014.07.047 · Cited by 74

Hydrogen transport and embrittlement in structural metals

Louthan, M. R., & Caskey, G. R. (1976) · International Journal of Hydrogen Energy · doi:10.1016/0360-3199(76)90024-0 · Cited by 74

Effects of Li additions on precipitation-strengthened Al–Sc and Al–Sc–Yb alloys

Krug, M. E., Dunand, D. C., & Seidman, D. N. (2010) · Acta Materialia · doi:10.1016/j.actamat.2010.11.037 · Cited by 72

Core–shell nanoscale precipitates in Al–0.06 at.% Sc microalloyed with Tb, Ho, Tm or Lu

Krug, M. E., Werber, A., Dunand, D. C., & Seidman, D. N. (2009) · Acta Materialia · doi:10.1016/j.actamat.2009.08.074 · Cited by 72

Taming martensitic transformation via concentration modulation at nanoscale

Zhu, J., Gao, Y., Wang, D., Zhang, T., & Wang, Y. (2017) · Acta Materialia · doi:10.1016/j.actamat.2017.03.042 · Cited by 72

γ+γ′ microstructures in the Co-Ta-V and Co-Nb-V ternary systems

Tirado, F. L. R., Toinin, J. P., & Dunand, D. C. (2018) · Acta Materialia · doi:10.1016/j.actamat.2018.03.057 · Cited by 72

Experimental Investigation and Thermodynamic Modeling of the Co-Rich Region in the Co-Al-Ni-W Quaternary System

Zhu, J. H., Titus, M. S., & Pollock, T. M. (2014) · Journal of Phase Equilibria and Diffusion · doi:10.1007/s11669-014-0327-5 · Cited by 71

Elastically confined martensitic transformation at the nano-scale in a multifunctional titanium alloy

Wang, H., Hao, Y., He, S. Y., Li, T., Cairney, J. M., Wang, Y., Wang, Y., Obbard, E. G., Prima, F., Du, K., et al. (2017) · Acta Materialia · doi:10.1016/j.actamat.2017.06.040 · Cited by 69

Stiff, light, strong and ductile: nano-structured High Modulus Steel

Springer, H., Baron, C., Szczepaniak, A., Uhlenwinkel, V., & Raabe, D. (2017) · Scientific Reports · doi:10.1038/s41598-017-02861-3 · Cited by 68

Characterization of a previously unidentified ordered orthorhombic metastable phase in Ti-5Al-5Mo-5V-3Cr

Zheng, Y., Williams, R. E. A., & Fraser, H. L. (2015) · Scripta Materialia · doi:10.1016/j.scriptamat.2015.10.037 · Cited by 67

Contribution of austenite-martensite transformation to deformability of advanced high strength steels: From atomistic mechanisms to microstructural response

Maresca, F., Kouznetsova, V. G., Geers, M. G. D., & Curtin, W. A. (2018) · Acta Materialia · doi:10.1016/j.actamat.2018.06.028 · Cited by 67

The potential for material circularity and independence in the U.S. steel sector

Cooper, D., Ryan, N. A., Syndergaard, K., & Zhu, Y. (2020) · Journal of Industrial Ecology · doi:10.1111/jiec.12971 · Cited by 67

Interdiffusion and Atomic Mobility for Face-Centered Cubic (FCC) Co-W Alloys

Cui, Y., Xu, G., Kato, R., Lu, X., Kainuma, R., & Ishida, K. (2013) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-012-1586-6 · Cited by 65

Elastocaloric effects in the extreme

Huseyin Sehitoglu, B., Wu, Y., & Ertekin, E. (2017) · Scripta Materialia · doi:10.1016/j.scriptamat.2017.05.017 · Cited by 65

The role of cuboidal ω precipitates on α precipitation in a Ti-20V alloy

Zheng, Y., Choudhuri, D., Alam, T., Williams, R. E. A., Banerjee, R., & Fraser, H. L. (2016) · Scripta Materialia · doi:10.1016/j.scriptamat.2016.06.004 · Cited by 64

Ambient- and elevated-temperature strengthening by Al3Zr-Nanoprecipitates and Al3Ni-Microfibers in a cast Al-2.9Ni-0.11Zr-0.02Si-0.005Er (at.%) alloy

Michi, R. A., Toinin, J. P., Seidman, D. N., & Dunand, D. C. (2019) · Materials Science and Engineering A · doi:10.1016/j.msea.2019.05.018 · Cited by 64

Subgrain lath martensite mechanics: A numerical–experimental analysis

Maresca, F., Kouznetsova, V. G., & Geers, M. G. D. (2014) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2014.09.002 · Cited by 63

A statistical overview of ship recycling

Mikelis, N. E. (2008) · WMU Journal of Maritime Affairs · doi:10.1007/bf03195133 · Cited by 61

Ab initiocalculations of rare-earth diffusion in magnesium

Huber, L., Elfimov, I., Rottler, J., & Militzer, M. (2012) · Physical Review B · doi:10.1103/physrevb.85.144301 · Cited by 61

Elemental partitioning and site-occupancy in γ/γ′ forming Co-Ti-Mo and Co-Ti-Cr alloys

Im, H. J., Makineni, S. K., Gault, B., Stein, F., Raabe, D., & Choi, P. (2018) · Scripta Materialia · doi:10.1016/j.scriptamat.2018.05.041 · Cited by 60

Mn and Mo additions to a dilute Al-Zr-Sc-Er-Si-based alloy to improve creep resistance through solid-solution- and precipitation-strengthening

Luca, A. D., Seidman, D. N., & Dunand, D. C. (2020) · Acta Materialia · doi:10.1016/j.actamat.2020.04.022 · Cited by 60

Creep of Al-Sc Microalloys with Rare-Earth Element Additions

Karnesky, R. A., Seidman, D. N., & Dunand, D. C. (2006) · Materials science forum · doi:10.4028/www.scientific.net/msf.519-521.1035 · Cited by 59

Properties and potential of two (Ni,Pt)Ti alloys for use as high-temperature actuator materials

Noebe, R. D., Gaydosh, D. J., Padula, S. A., II, Garg, A., Biles, T., & Nathal, M. V. (2005) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.598492 · Cited by 58

Application of Computational Thermodynamics to the Design of a Co-Ni-Based γ′-Strengthened Superalloy

Lass, E. A. (2017) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-017-4040-y · Cited by 58

Optimization of the Electric Arc Furnace Process

Saboohi, Y., Fathi, A., Škrjanc, I., & Logar, V. (2018) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2018.2883247 · Cited by 58

Retardation of plastic instability via damage-enabled microstrain delocalization

Hoefnagels, J. P. M., Taşan, C. C., Maresca, F., Peters, F. J., & Kouznetsova, V. G. (2015) · Journal of Materials Science · doi:10.1007/s10853-015-9164-0 · Cited by 57

Precipitation in cold-rolled Al–Sc–Zr and Al–Mn–Sc–Zr alloys prepared by powder metallurgy

Vlach, M., Stulíková, I., Smola, B., Kekule, T., Kudrnová, H., Daniš, S., Gemma, R., Ocenasek, V., Málek, J., Tanprayoon, D., et al. (2013) · Materials Characterization · doi:10.1016/j.matchar.2013.09.010 · Cited by 57

Superior room-temperature ductility of typically brittle quasicrystals at small sizes

Zou, Y., Kuczera, P., Sologubenko, A. S., Sumigawa, T., Kitamura, T., Steurer, W., & Spolenak, R. (2016) · Nature Communications · doi:10.1038/ncomms12261 · Cited by 57

Advances in Science and Technology of Compact Heat Exchangers

Shah, R. K. (2006) · Heat Transfer Engineering · doi:10.1080/01457630600559462 · Cited by 56

Joining for lightweight vehicles

Mallick, P. K. (2010) · Elsevier eBooks · doi:10.1533/9781845697822.2.275 · Cited by 54

Electron Beam Melting and Refining of Metals and Alloys.

Choudhury, A., & Hengsberger, E. (1992) · ISIJ International · doi:10.2355/isijinternational.32.673 · Cited by 53

Integrated Computational Materials Engineering

National Research Council (2008) · National Academies Press eBooks · doi:10.17226/12199 · Cited by 53

Effect of heat treatments on the microhardness and tensile strength of Al–0.25 wt.% Zr alloy

Çadırlı, E., Tecer, H., Şahin, M., Yilmaz, E., Kırındı, T., & Gündüz, M. (2015) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2015.01.193 · Cited by 52

Creep properties and precipitate evolution in Al–Li alloys microalloyed with Sc and Yb

Krug, M. E., Seidman, D. N., & Dunand, D. C. (2012) · Materials Science and Engineering A · doi:10.1016/j.msea.2012.04.075 · Cited by 51

Mathematical modeling of thermo-mechanical behavior of strip during twin roll casting of an AZ31 magnesium alloy

Hadadzadeh, A., & Wells, M. A. (2013) · Journal of Magnesium and Alloys · doi:10.1016/j.jma.2013.04.001 · Cited by 50

Role of Yb and Si on the precipitation hardening and recrystallization of dilute Al–Zr alloys

Wen, S., Gao, K., Huang, H., Wang, W., & Nie, Z. (2014) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2014.02.065 · Cited by 50

On dislocation involvement in Ti–Nb gum metal plasticity

Plancher, E., Taşan, C. C., Sandloebes, S., & Raabe, D. (2013) · Scripta Materialia · doi:10.1016/j.scriptamat.2013.01.034 · Cited by 47

G. Petzow and G. Effenberg (Eds.): Ternary Alloys, A Comprehensive Compendium of Evaluated Constitutional Data and Phase Diagrams, VCH Weinheim.

Weil, K. G. (1993) · Berichte der Bunsengesellschaft für physikalische Chemie · doi:10.1002/bbpc.19930970429 · Cited by 47

Standard enthalpies of formation of selected XYZ half-Heusler compounds

Yin, M., & Nash, P. (2015) · The Journal of Chemical Thermodynamics · doi:10.1016/j.jct.2015.07.016 · Cited by 46

Ageless Aluminum-Cerium-Based Alloys in High-Volume Die Casting for Improved Energy Efficiency

Stromme, E. T., Henderson, H. B., Sims, Z. C., Kesler, M. S., Weiss, D. J., Ott, R. T., Meng, F., Kassoumeh, S., Evangelista, J., Begley, G., et al. (2018) · JOM · doi:10.1007/s11837-018-2861-9 · Cited by 46

Thermodynamic assessment of Co–Al–W system and solidification of Co-enriched ternary alloys

Cui, Y., Zhang, X., Xu, G., Zhu, W. J., Liu, H., & Jin, Z. P. (2010) · Journal of Materials Science · doi:10.1007/s10853-010-5115-y · Cited by 45

On the Maintenance of Combinational Vibrations by Two Simple Harmonic Forces

Raman, C. V. (1915) · Physical Review · doi:10.1103/physrev.5.1 · Cited by 44

Hardening mechanisms in Al-Sc alloys

Torma, T., Kov�cs-Cset�nyi, E., Turmezey, T., Ung�r, T., & Kov�cs, I. (1989) · Journal of Materials Science · doi:10.1007/bf01168955 · Cited by 43

Numerical analysis of twin thickening process in magnesium alloys

Šiška, F., Stratil, L., Čížek, J., Ghaderi, A., & Barnett, M. R. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.10.068 · Cited by 43

Theoretical investigation of the ω -related phases in TiAl−Nb /Mo alloys

Hu, Q., Vitos, L., & Yang, R. (2014) · Physical Review B · doi:10.1103/physrevb.90.054109 · Cited by 42

Experimental investigation of phase equilibria and microstructure in the Co–Ti–V ternary system

Ruan, J., Wang, C. P., Zhao, C., Yang, S., Yang, T., & Liu, X. (2014) · Intermetallics · doi:10.1016/j.intermet.2014.01.011 · Cited by 41

Surface Engineering of Mo-Base Alloys for Elevated-Temperature Environmental Resistance

Perepezko, J. H. (2015) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070214-020959 · Cited by 40

A novel multi-pass dual-indenter scratch test to unravel abrasion damage formation in construction steels

Xu, X., van der Zwaag, S., & Xu, W. (2014) · Wear · doi:10.1016/j.wear.2014.10.011 · Cited by 39

Evolution of B2(ω) region in high-Nb containing TiAl alloy in intermediate temperature range

Wang, X., Yang, J., Song, L., Kou, H., Li, J., & Fu, H. (2016) · Intermetallics · doi:10.1016/j.intermet.2016.11.007 · Cited by 39

Life-Cycle Assessment of the Recycling of Magnesium Vehicle Components

Ehrenberger, S., & Friedrich, H. E. (2013) · JOM · doi:10.1007/s11837-013-0703-3 · Cited by 38

Properties and Processing of TIMETAL LCB

Kosaka, Y., Fox, S. P., Faller, K., & Reichman, S. H. (2005) · Journal of Materials Engineering and Performance · doi:10.1361/105994905x75637 · Cited by 36

Deformation behaviour of lath martensite in multi-phase steels

Maresca, F., Kouznetsova, V. G., & Geers, M. G. D. (2015) · Scripta Materialia · doi:10.1016/j.scriptamat.2015.08.004 · Cited by 35

Hydrogen embrittlement of high strength steels

Garrison, W. M., & Moody, N. R. (2012) · Elsevier eBooks · doi:10.1533/9780857093899.3.421 · Cited by 35

Effects of Sb micro-alloying on precipitate evolution and mechanical properties of a dilute Al-Sc-Zr alloy

Lin, J. D., Okle, P., Dunand, D. C., & Seidman, D. N. (2016) · Materials Science and Engineering A · doi:10.1016/j.msea.2016.10.067 · Cited by 35

Thermal stability of the omega phase in Zr-containing TiAl alloys

Jiang, H. Z., Hu, D. W., & Wu, X. (2008) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2008.07.015 · Cited by 34

Dendritic Growth in Mg-Based Alloys: Phase-Field Simulations and Experimental Verification by X-ray Synchrotron Tomography

Wang, M., Xu, Y., Zheng, Q., Wu, S., Jing, T., & Chawla, N. (2014) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-014-2200-x · Cited by 34

Atom Probe Tomographic Studies of Precipitation in Al-0.1Zr-0.1Ti (at.%) Alloys

Knipling, K. E., Dunand, D. C., & Seidman, D. N. (2007) · Microscopy and Microanalysis · doi:10.1017/s1431927607070882 · Cited by 34

Solubility and ordering of Ti, Ta, Mo and W on the Al sublattice in L12-Co3Al

Koßmann, J., Hammerschmidt, T., Maisel, S. B., Müller, S., & Drautz, R. (2015) · Intermetallics · doi:10.1016/j.intermet.2015.04.009 · Cited by 33

Dry rolling/sliding wear of nanostructured pearlite

Bakshi, S. D., Leiro, A., Prakash, B., & Bhadeshia, H. K. D. H. (2015) · Materials Science and Technology · doi:10.1179/1743284714y.0000000751 · Cited by 33

Effect of micro-additions of Ge, In or Sn on precipitation in dilute Al-Sc-Zr alloys

Okle, P., Lin, J. D., Zhu, T., Dunand, D. C., & Seidman, D. N. (2018) · Materials Science and Engineering A · doi:10.1016/j.msea.2018.10.058 · Cited by 33

Characterization of Edge Fracture in Various Types of Advanced High Strength Steel

Dykeman, J., Malcolm, S., Yan, B., Chintamani, J., Huang, G., Ramisetti, N. K., & Hong, Z. (2011) · SAE technical papers on CD-ROM/SAE technical paper series · doi:10.4271/2011-01-1058 · Cited by 32

Development and Applications of Titanium Alloy SP-700 with High Formability

Ogawa, A., 新倉, 正., Ouchi, C., Minikawa, K., & Yamada, M. (1996) · Journal of Testing and Evaluation · doi:10.1520/jte12683j · Cited by 32

High‐Resolution Insight into Materials Criticality: Quantifying Risk for By‐Product Metals from Primary Production

Fu, X., Polli, A., & Olivetti, E. (2018) · Journal of Industrial Ecology · doi:10.1111/jiec.12757 · Cited by 32

Rapid Assessment of Oxidation Behavior in Co-Based γ/γ′ Alloys

Stewart, C. A., Suzuki, A., Pollock, T. M., & Levi, C. G. (2018) · Oxidation of Metals · doi:10.1007/s11085-018-9849-2 · Cited by 32

Effects of Nb and Ta additions on the strength and coarsening resistance of precipitation-strengthened Al-Zr-Sc-Er-Si alloys

Erdeniz, D., Luca, A. D., Seidman, D. N., & Dunand, D. C. (2018) · Materials Characterization · doi:10.1016/j.matchar.2018.04.051 · Cited by 32

Measurement of the critical resolved shear stress for basal slip in magnesium alloys using instrumented indentation

Nayyeri, G., Poole, W. J., Sinclair, C. W., & Zaefferer, S. (2018) · Scripta Materialia · doi:10.1016/j.scriptamat.2018.07.003 · Cited by 32

Effect of γ precipitates on the martensitic transformation of β CuZnAl studied by calorimetry

Auguet, C., Cesari, E., Rapacioli, R., & Mañosa, L. (1989) · Scripta Metallurgica · doi:10.1016/0036-9748(89)90455-9 · Cited by 31

Thermal expansion behavior of new Co-based alloys and implications for coatings

Jackson, R. W., Titus, M. S., Begley, M. R., & Pollock, T. M. (2016) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2015.12.083 · Cited by 31

Pseudoelastic Cycling and Two-Way Shape Memory Effect in β Cu–Zn–Al Alloys with γ-Precipitates

Pons, J., Sade, M. L., Lovey, F. C., & Cesari, E. (1993) · Materials Transactions JIM · doi:10.2320/matertrans1989.34.888 · Cited by 28

Effects of Si and Fe micro-additions on the aging response of a dilute Al-0.08Zr-0.08Hf-0.045Er at.% alloy

Michi, R. A., Luca, A. D., Seidman, D. N., & Dunand, D. C. (2018) · Materials Characterization · doi:10.1016/j.matchar.2018.10.016 · Cited by 28

Warm forming limits of rare earth-magnesium alloy ZEK100 sheet

Boba, M., Butcher, C., Panahi, N., Worswick, M. J., Mishra, R. K., & Carter, J. T. (2015) · International Journal of Material Forming · doi:10.1007/s12289-015-1267-2 · Cited by 27

In-Situ Synchrotron Characterization of Transformation Sequences in TiNi-Based Shape Memory Alloys during Thermal Cycling

Jones, N. G., Raghunathan, S. L., & Dye, D. (2010) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-009-0166-x · Cited by 26

Experimental study and thermodynamic modeling of the Al-Sc-Zr system

Bo, H., Liu, L. B., Hu, J., & Jin, Z. P. (2017) · Computational Materials Science · doi:10.1016/j.commatsci.2017.02.029 · Cited by 26

Morphology and stability of orthorhombic and hexagonal phases in a lamellar γ-Ti-42Al-8.5Nb alloy-A transmission electron microscopy study

Gabrisch, H., Lorenz, U., Pyczak, F., Rackel, M. W., & Stark, A. (2017) · Acta Materialia · doi:10.1016/j.actamat.2017.05.067 · Cited by 26

Transformation stress of shape memory alloy CuZnAl: Non-Schmid behavior

Alkan, S., Wu, Y., Ojha, A., & Huseyin Sehitoglu, B. (2018) · Acta Materialia · doi:10.1016/j.actamat.2018.02.011 · Cited by 26

The role of indenter radius on spherical indentation of high purity magnesium loaded nearly parallel to the c-axis

Nayyeri, G., Poole, W. J., Sinclair, C. W., & Zaefferer, S. (2017) · Scripta Materialia · doi:10.1016/j.scriptamat.2017.04.039 · Cited by 25

Scandium-Enriched Nanoprecipitates in Aluminum Providing Enhanced Coarsening and Creep Resistance

Luca, A. D., Dunand, D. C., & Seidman, D. N. (2018) · The minerals, metals & materials series · doi:10.1007/978-3-319-72284-9_207 · Cited by 25

Low Temperature Warm Forming of Magnesium ZEK 100 Sheets for Automotive Applications

Niu, X. P., Skszek, T., Fabischek, M., & Zak, A. (2014) · Materials science forum · doi:10.4028/www.scientific.net/msf.783-786.431 · Cited by 24

Role of vibrational and configurational excitations in stabilizing the L12 structure in Co-rich Co-Al-W alloys

Rhein, R. K., Dodge, P. C., Chen, M., Titus, M. S., Pollock, T. M., & der Ven, A. V. (2015) · Physical Review B · doi:10.1103/physrevb.92.174117 · Cited by 24

Bond coatings with high rumpling resistance: Design and characterization

Jorgensen, D. J., Suzuki, A., Lipkin, D. M., & Pollock, T. M. (2016) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2016.05.002 · Cited by 23

Development of High-Strength and High-Electrical-Conductivity Aluminum Alloys for Power Transmission Conductors

Flores, F. U., Seidman, D. N., Dunand, D. C., & Vo, N. Q. (2018) · The minerals, metals & materials series · doi:10.1007/978-3-319-72284-9_34 · Cited by 22

Improving coarsening resistance of dilute Al-Sc-Zr-Si alloys with Sr or Zn additions

Lin, J. D., Seidman, D. N., & Dunand, D. C. (2019) · Materials Science and Engineering A · doi:10.1016/j.msea.2019.03.104 · Cited by 22

Scandium In Aluminium Alloys: Physical Metallurgy, Properties And Applications

Røyset, J. (2013) · Frattura ed Integrità Strutturale · Cited by 21

An instrumented spherical indentation study on high purity magnesium loaded nearly parallel to the c-axis

Nayyeri, G., Poole, W. J., Sinclair, C. W., Zaefferer, S., Konijnenberg, P. J., & Zambaldi, C. (2016) · Materials Science and Engineering A · doi:10.1016/j.msea.2016.05.112 · Cited by 21

The Materials Genome Initiative at the National Science Foundation: A Status Report after the First Year of Funded Research

(2014) · JOM · doi:10.1007/s11837-014-0888-0 · Cited by 21

Evolution of microstructural length scales during solidification of magnesium alloys

Gurevich, S., Amoorezaei, M., Montiel, D., & Provatas, N. (2012) · Acta Materialia · doi:10.1016/j.actamat.2012.02.055 · Cited by 19

The Influence of Strain Path on Rare Earth Recrystallization Textures in a Magnesium-Zinc-Rare Earth Alloy

Griffiths, D., Davis, B., & Robson, J. D. (2017) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-017-4404-3 · Cited by 19

Alloying Effects in the γ′ Phase of Co‐Based Superalloys

Mottura, A., Janotti, A., & Pollock, T. M. (2012) · doi:10.1002/9781118516430.ch76 · Cited by 18

A phase field model coupled with pressure-effect-embedded thermodynamic modeling for describing microstructure and microsegregation in pressurized solidification of a ternary magnesium alloy

Shang, S., Han, Z., Sun, W., & Luo, A. A. (2017) · Computational Materials Science · doi:10.1016/j.commatsci.2017.05.015 · Cited by 18

The role of molybdenum in suppressing cold dwell fatigue in titanium alloys

Ready, A. J., Haynes, P. D., Grabowski, B., Rugg, D. J., & Sutton, A. P. (2017) · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · doi:10.1098/rspa.2017.0189 · Cited by 18

Using quality mapping to predict spatial variation in local properties and component performance in Mg alloy thin-walled high-pressure die castings: an ICME approach and case study

Forsmark, J., Zindel, J. W., Godlewski, L., Zheng, J., Allison, J. E., & Li, M. (2015) · Integrating materials and manufacturing innovation · doi:10.1186/s40192-015-0033-0 · Cited by 17

Local Plastic-Strain Heterogeneities and Their Impact on the Ductility of Mg

Martin, G., Sinclair, C. W., Poole, W. J., & Azizi-Alizamini, H. (2015) · JOM · doi:10.1007/s11837-015-1449-x · Cited by 16

Microstructure and Texture Through Thixomolding and Thermomechanical Processing and the Role of Mg17Al12 Particles

Berman, T. D., Pollock, T. M., & Jones, J. W. (2016) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-016-3450-6 · Cited by 16

On the degradation of shape memory effect in trace Ti-added Cu–Zn–Al alloy

Bhuniya, A. K., Chattopadhyay, P. P., Datta, S., & Banerjee, M. K. (2004) · Materials Science and Engineering A · doi:10.1016/j.msea.2004.09.068 · Cited by 15

NiTi Production via the FFC Cambridge Process: Refinement of Process Parameters

Jackson, B. K., Inman, D., Jackson, M., Dye, D., & Dashwood, R. J. (2010) · Journal of The Electrochemical Society · doi:10.1149/1.3289996 · Cited by 14

Diffusion in FCC Co-rich Co-Al-W Alloys at 900 and 1000 °C

Moon, K.-W., Campbell, C. E., Williams, M. E., & Boettinger, W. J. (2016) · Journal of Phase Equilibria and Diffusion · doi:10.1007/s11669-016-0486-7 · Cited by 14

On the prismatic precipitate plates in Mg–Ca–In alloys

Zhu, Y., Weyland, M., Medhekar, N. V., Dwyer, C., Mendis, C. L., Hono, K., & Nie, J. F. (2015) · Scripta Materialia · doi:10.1016/j.scriptamat.2015.01.007 · Cited by 12

Creep Behavior of Quinary γ′-Strengthened Co-Based Superalloys

Rhein, R. K., Callahan, P. G., Murray, S. P., Stinville, J., Titus, M. S., der Ven, A. V., & Pollock, T. M. (2018) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-018-4768-z · Cited by 12

Investigation of the Microstructure Evolution and Deformation Mechanisms of a Mg-Zn-Zr-RE Twin-Roll-Cast Magnesium Sheet by In-Situ Experimental Techniques

Máthis, K., Fekete, K., Farkas, G., Choe, H., Shin, K. S., & Vinogradov, A. (2018) · Materials · doi:10.3390/ma11020200 · Cited by 12

Thermodynamic modelling and in-situ neutron diffraction investigation of the (Nd + Mg + Zn) system

Zhu, Z., Gharghouri, M. A., & Pelton, A. D. (2015) · The Journal of Chemical Thermodynamics · doi:10.1016/j.jct.2015.10.012 · Cited by 12

Manufacturing High Entropy Alloys: Pathway to Industrial Competitiveness

Bishop-Moser, J., & Miracle, D. (2018) · Deep Blue (University of Michigan) · Cited by 11

Computational Thermodynamics and Kinetics for Magnesium Alloy Development

Luo, A. A., Sun, W., Zhong, W., & Zhao, J. (2015) · AM&P Technical Articles · doi:10.31399/asm.amp.2015-01.p026 · Cited by 11

Integrated Computational Materials Engineering and the Materials Genome Initiative: Accelerating Materials Innovation

Christodoulou, J. A. (2013) · AM&P Technical Articles · doi:10.31399/asm.amp.2013-03.p028 · Cited by 10

Study on the effect of trace zirconium addition on the microstructural evolution in Cu–Zn–Al shape memory alloy

Bhuniya, A. K., Chattopadhyay, P. P., Datta, S., & Banerjee, M. K. (2004) · Materials Science and Engineering A · doi:10.1016/j.msea.2004.09.063 · Cited by 9

Materials for a Non-Steady-State World

Schafrik, R. E. (2016) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-016-3442-6 · Cited by 9

Critical Materials

Offerman, S. E. (2018) · World Scientific series in current energy issues · doi:10.1142/11007 · Cited by 9

Thermodynamic modelling and in-situ neutron diffraction investigation of the (Ce + Mg + Zn) system

Zhu, Z., Gharghouri, M. A., Medraj, M., Lee, S. Y., & Pelton, A. D. (2015) · The Journal of Chemical Thermodynamics · doi:10.1016/j.jct.2015.10.008 · Cited by 7

New concept for magnetocaloric heat pumps based on thermal diodes and latent heat transfer.

Bartholomé, K., T., H., Mahlke, A., & al., E. (2016) · Fraunhofer-Publica (Fraunhofer-Gesellschaft) · doi:10.18462/iir.thermag.2016.0079 · Cited by 4

ORTHORHOMBIC PHASE TRANSFORMATIONS IN TITANIUM ALLOYS AND THEIR APPLICATIONS

Yang, R., Hao, Y., Obbard, E. G., Dong, L., & Lu, B. (2011) · Acta Metallurgica Sinica · doi:10.3724/sp.j.1037.2010.01443 · Cited by 3

Magnesium Alloys in Aircraft Seats - Developments in Magnesium Alloy Flammability Testing

Aircraft Seat Committee (2014) · doi:10.4271/air6160 · Cited by 2

ORTHORHOMBIC PHASE TRANSFORMATIONS IN TITANIUM ALLOYS AND THEIR APPLICATIONS

Yang, R., 郝玉琳, Dong, L., & Lv, B. (2010) · Acta Metallurgica Sinica · doi:10.3724/sp.j.1037.2010.00483 · Cited by 1

Making sustainable aluminum by recycling scrap: The science of “dirty” alloys

Raabe, D., Ponge, D., Uggowitzer, P. J., Roscher, M., Paolantonio, M., Liu, C., Antrekowitsch, H., Kozeschnik, E., Seidman, D. N., Gault, B., et al. (2022) · Progress in Materials Science · doi:10.1016/j.pmatsci.2022.100947 · Cited by 685

The Materials Science behind Sustainable Metals and Alloys

Raabe, D. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00799 · Cited by 596

Fundamentals and comprehensive insights on pulsed laser synthesis of advanced materials for diverse photo- and electrocatalytic applications

Theerthagiri, J., Karuppasamy, K., Lee, S. J., Shwetharani, R., Kim, H.-S., Pasha, S. K. K., Ashokkumar, M., & Choi, M. Y. (2022) · Light: Science & Applications · doi:10.1038/s41377-022-00904-7 · Cited by 461

Wear-resistant CoCrNi multi-principal element alloy at cryogenic temperature

Ren, Y., Zhou, Q., Hua, D., Huang, Z., Li, Y., Jia, Q., Gumbsch, P., Greiner, C., Wang, H., & Liu, W. (2023) · 中国科学通报：英文版 · doi:10.1016/j.scib.2023.12.003 · Cited by 179

Manipulating Stacking Fault Energy to Achieve Crack Inhibition and Superior Strength–Ductility Synergy in an Additively Manufactured High‐Entropy Alloy

Niu, P., Li, R., Gan, K., Fan, Z., Yuan, T., & Han, C. (2024) · Advanced Materials · doi:10.1002/adma.202310160 · Cited by 149

Aluminium and its alloys; with experimental investigations

Self, E. D. (1887) · Journal of the Franklin Institute · doi:10.1016/0016-0032(87)90236-5

Dow's polymer enhancer speeds automotive cable production

(2006) · Additives for Polymers · doi:10.1016/s0306-3747(06)70528-0

Advances in Design by Metallic Materials: Synthesis, Characterization, Simulation and Applications

Fragassa, C., Épp, J., Lesiuk, G., & Zivkovic, M. (2021) · MDPI eBooks · doi:10.3390/books978-3-0365-0747-7

Material challenges in developing a sustainable metal processing infrastructure :

Iams, A. D., Zuback, J. S., Stoudt, M. R., & Campbell, C. E. (2025) · doi:10.6028/nist.sp.1500-32

Structural metal alloys: towards environmentally friendly materials

Meshalkin, V. P., Kolmakov, A. G., Nzioka, A. M., Bannykh, I. O., Sevostyanov, M. A., Konushkin, S. V., Kaplan, M. A., & Chistyakova, T. B. (2025) · Russian Chemical Reviews · doi:10.59761/rcr5165 · Cited by 4