Sustainability through alloy design: Challenges and opportunities

Microstructural development in equiatomic multicomponent alloys

Cantor, B., Chang, I. T. H., Knight, P., & Vincent, A. J. B. (2004) · Materials Science and Engineering A · doi:10.1016/j.msea.2003.10.257 · Cited by 10,215

A critical review of high entropy alloys and related concepts

Miracle, D. B., & Senkov, O. N. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.08.081 · Cited by 9,065

Contact and Rubbing of Flat Surfaces

Archard, J. F. (1953) · Journal of Applied Physics · doi:10.1063/1.1721448 · Cited by 7,936

X-Ray Diffraction

Warren, Β. E. (1968) · Cited by 5,833

A fracture-resistant high-entropy alloy for cryogenic applications

Gludovatz, B., Hohenwarter, A., Catoor, D., Chang, E. H., George, E. P., & Ritchie, R. O. (2014) · Science · doi:10.1126/science.1254581 · Cited by 5,683

Entropy-stabilized oxides

Rost, C. M., Sachet, E., Borman, T., Moballegh, A., Dickey, E. C., Hou, D., Jones, J. L., Curtarolo, S., & Maria, J.-P. (2015) · Nature Communications · doi:10.1038/ncomms9485 · Cited by 3,525

Refractory high-entropy alloys

Senkov, O. N., Wilks, G. B., Miracle, D. B., Chuang, C. P., & Liaw, P. K. (2010) · Intermetallics · doi:10.1016/j.intermet.2010.05.014 · Cited by 2,971

Nickel-Based Superalloys for Advanced Turbine Engines: Chemistry, Microstructure and Properties

Pollock, T. M., & Tin, S. (2006) · Journal of Propulsion and Power · doi:10.2514/1.18239 · Cited by 2,601

The Digital Twin Paradigm for Future NASA and U.S. Air Force Vehicles

Glaessgen, E., & Stargel, D. (2012) · 53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference 20th AIAA/ASME/AHS Adaptive Structures Conference 14th AIAA · doi:10.2514/6.2012-1818 · Cited by 2,404

Orientation gradients and geometrically necessary dislocations in ultrafine grained dual-phase steels studied by 2D and 3D EBSD

Calcagnotto, M., Ponge, D., Demir, E., & Raabe, D. (2010) · Materials Science and Engineering A · doi:10.1016/j.msea.2010.01.004 · Cited by 2,337

Fundamentals and advances in magnesium alloy corrosion

Esmaily, M., Svensson, J., Fajardo, S., Birbilis, N., Frankel, G. S., Virtanen, S., Arrabal, R., Thomas, S., & Johansson, L. G. (2017) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.04.011 · Cited by 2,120

Atomic packing and short-to-medium-range order in metallic glasses

Sheng, H. W., Luo, W., Alamgir, F. M., Bai, J., & Ma, E. (2006) · Nature · doi:10.1038/nature04421 · Cited by 2,097

High entropy alloys: A focused review of mechanical properties and deformation mechanisms

George, E. P., Curtin, W. A., & Taşan, C. C. (2019) · Acta Materialia · doi:10.1016/j.actamat.2019.12.015 · Cited by 1,956

Exceptional damage-tolerance of a medium-entropy alloy CrCoNi at cryogenic temperatures

Gludovatz, B., Hohenwarter, A., Thurston, K. V. S., Bei, H., Wu, Z., George, E. P., & Ritchie, R. O. (2016) · Nature Communications · doi:10.1038/ncomms10602 · Cited by 1,926

High strength Fe–Mn–(Al, Si) TRIP/TWIP steels development — properties — application

Grässel, O., Krüger, L., Frommeyer, G., & Meyer, L. W. (2000) · International Journal of Plasticity · doi:10.1016/s0749-6419(00)00015-2 · Cited by 1,819

Enhanced strength and ductility in a high-entropy alloy via ordered oxygen complexes

Lei, Z., Liu, X., Wu, Y., Wang, H., Jiang, S., Wang, S., Hui, X., Wu, Y., Gault, B., Kontis, P., et al. (2018) · Nature · doi:10.1038/s41586-018-0685-y · Cited by 1,764

Multicomponent intermetallic nanoparticles and superb mechanical behaviors of complex alloys

Yang, T., Zhao, Y., Tong, Y., Jiao, Z., Wei, J., Cai, J., Han, X., Chen, D., Hu, A., Kai, J., et al. (2018) · Science · doi:10.1126/science.aas8815 · Cited by 1,680

Development and exploration of refractory high entropy alloys—A review

Senkov, O. N., Miracle, D. B., Chaput, K. J., & Couzinié, J. (2018) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.2018.153 · Cited by 1,648

Twinning-induced plasticity (TWIP) steels

Cooman, B. C. D., Estrin, Y., & Kim, S. K. (2017) · Acta Materialia · doi:10.1016/j.actamat.2017.06.046 · Cited by 1,618

Direct electrochemical reduction of titanium dioxide to titanium in molten calcium chloride

Chen, G. Z., Fray, D. J., & Farthing, T. W. (2000) · Nature · doi:10.1038/35030069 · Cited by 1,537

Quantitative X-ray tomography

Maire, É., & Withers, P. J. (2013) · International Materials Reviews · doi:10.1179/1743280413y.0000000023 · Cited by 1,391

Short-range order and its impact on the CrCoNi medium-entropy alloy

Zhang, R., Zhao, S., Ding, J., Chong, Y., Jia, T., Ophus, C., Asta, M., Ritchie, R. O., & Minor, A. M. (2020) · Nature · doi:10.1038/s41586-020-2275-z · Cited by 1,312

Formation of simple crystal structures in Cu-Co-Ni-Cr-Al-Fe-Ti-V alloys with multiprincipal metallic elements

Yeh, J., Lin, S.-J., Chin, T., Gan, J. Y., Chen, S.-K., Shun, T.-T., Tsau, C.-H., & Chou, S. I. (2004) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-006-0234-4 · Cited by 1,257

Cobalt-Base High-Temperature Alloys

Sato, J., Omori, T., Oikawa, K., Ohnuma, I., Kainuma, R., & Ishida, K. (2006) · Science · doi:10.1126/science.1121738 · Cited by 1,157

Steels for bearings

Bhadeshia, H. K. D. H. (2011) · Progress in Materials Science · doi:10.1016/j.pmatsci.2011.06.002 · Cited by 1,049

Evaluating Rare Earth Element Availability: A Case with Revolutionary Demand from Clean Technologies

Alonso, E., Sherman, A. M., Wallington, T. J., Everson, M. P., Field, F. R., Roth, R., & Kirchain, R. E. (2012) · Environmental Science & Technology · doi:10.1021/es203518d · Cited by 1,033

Titanium Science and Technology

Jaffee, R. I., & Burte, H. M. (1973) · Springer eBooks · doi:10.1007/978-1-4757-1346-6 · Cited by 994

Thermomechanical aspects of NiTi

Shaw, J. A. (1995) · Journal of the Mechanics and Physics of Solids · doi:10.1016/0022-5096(95)00024-d · Cited by 971

Multifunctional Alloys Obtained via a Dislocation-Free Plastic Deformation Mechanism

SAITO, T. K., Furuta, T., Hwang, J.-H., Kuramoto, S., Nishino, K., Suzuki, N., Chen, R., Yamada, A., Kazuhiko, I., Seno, Y., et al. (2003) · Science · doi:10.1126/science.1081957 · Cited by 938

Precipitation strengthening at ambient and elevated temperatures of heat-treatable Al(Sc) alloys

Seidman, D. N., Marquis, E. A., & Dunand, D. C. (2002) · Acta Materialia · doi:10.1016/s1359-6454(02)00201-x · Cited by 936

Alloy design for aircraft engines

Pollock, T. M. (2016) · Nature Materials · doi:10.1038/nmat4709 · Cited by 928

Accelerated exploration of multi-principal element alloys with solid solution phases

Senkov, O. N., Miller, J. D., Miracle, D. B., & Woodward, C. F. (2015) · Nature Communications · doi:10.1038/ncomms7529 · Cited by 874

Hydrogen Embrittlement Understood

Robertson, I. M., Sofronis, P., Nagao, A., Martin, M. L., Wang, S., Gross, D., & Nygren, K. E. (2015) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-015-2836-1 · Cited by 848

Criteria for developing castable, creep-resistant aluminum-based alloys – A review

Knipling, K. E., Dunand, D. C., & Seidman, D. N. (2006) · International Journal of Materials Research (formerly Zeitschrift fuer Metallkunde) · doi:10.1515/ijmr-2006-0042 · Cited by 817

Omega phase in materials

Sikka, S. K., Vohra, Y. K., & Chidambaram, R. (1982) · Progress in Materials Science · doi:10.1016/0079-6425(82)90002-0 · Cited by 813

Deformation and fracture mechanisms in fine- and ultrafine-grained ferrite/martensite dual-phase steels and the effect of aging

Calcagnotto, M., Adachi, Y., Ponge, D., & Raabe, D. (2010) · Acta Materialia · doi:10.1016/j.actamat.2010.10.002 · Cited by 802

Life Cycle Assessment of Metals: A Scientific Synthesis

Nuss, P., & Eckelman, M. J. (2014) · PLoS ONE · doi:10.1371/journal.pone.0101298 · Cited by 777

Quenching and partitioning martensite—A novel steel heat treatment

Edmonds, D. V., He, K., Rizzo, F. C., Cooman, B. C. D., Matlock, D. K., & Speer, J. G. (2006) · Materials Science and Engineering A · doi:10.1016/j.msea.2006.02.133 · Cited by 772

A review of very-high-temperature Nb-silicide-based composites

Bewlay, B. P., Jackson, M. R., Subramanian, P. R., & Zhao, J. (2003) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-003-0269-8 · Cited by 734

Towards magnesium alloys for high-volume automotive applications

Joost, W. J., & Krajewski, P. E. (2016) · Scripta Materialia · doi:10.1016/j.scriptamat.2016.07.035 · Cited by 731

Global socioeconomic material stocks rise 23-fold over the 20th century and require half of annual resource use

Krausmann, F., Wiedenhofer, D., Lauk, C., Haas, W., Tanikawa, H., Fishman, T., Miatto, A., Schandl, H., & Haberl, H. (2017) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1613773114 · Cited by 710

Combinatorial search of thermoelastic shape-memory alloys with extremely small hysteresis width

Cui, J., Chu, Y. S., Famodu, O. O., Furuya, Y., Simpers, J. H., James, R. D., Ludwig, A., Thienhaus, S., Wuttig, M. R., Zhang, Z., et al. (2006) · Nature Materials · doi:10.1038/nmat1593 · Cited by 707

Mechanistic origin and prediction of enhanced ductility in magnesium alloys

Wu, Z., Ahmad, R., Yin, B., Sandlöbes, S., & Curtin, W. A. (2018) · Science · doi:10.1126/science.aap8716 · Cited by 684

The formation of cracks as a result of plastic flow

Stroh, A. N. (1954) · Proceedings of the Royal Society of London A Mathematical and Physical Sciences · doi:10.1098/rspa.1954.0124 · Cited by 658

An Overview of Dual-Phase Steels: Advances in Microstructure-Oriented Processing and Micromechanically Guided Design

Taşan, C. C., Diehl, M., Yan, D., Bechtold, M., Roters, F., Schemmann, L., Zheng, C., Peranio, N., Ponge, D., Koyama, M., et al. (2015) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070214-021103 · Cited by 654

A Novel Low-Density, High-Hardness, High-entropy Alloy with Close-packed Single-phase Nanocrystalline Structures

Youssef, K. M., Zaddach, A. J., Niu, C., Irving, D. L., & Koch, C. C. (2014) · Materials Research Letters · doi:10.1080/21663831.2014.985855 · Cited by 650

Alloys-By-Design: Application to nickel-based single crystal superalloys

Reed, R. C., Tao, T., & Warnken, N. (2009) · Acta Materialia · doi:10.1016/j.actamat.2009.08.018 · Cited by 638

Nanoscale structural evolution of Al3Sc precipitates in Al(Sc) alloys

Marquis, E. A., & Seidman, D. N. (2001) · Acta Materialia · doi:10.1016/s1359-6454(01)00116-1 · Cited by 638

Prevention of Hydrogen Embrittlement in Steels

Bhadeshia, H. K. D. H. (2016) · ISIJ International · doi:10.2355/isijinternational.isijint-2015-430 · Cited by 635

A new ordered orthorhombic phase in a Ti3AlNb alloy

Banerjee, D., Gogia, A. K., Nandi, T. K., & Joshi, V. (1988) · Acta Metallurgica · doi:10.1016/0001-6160(88)90141-1 · Cited by 625

A Techno-economic analysis and systematic review of carbon capture and storage (CCS) applied to the iron and steel, cement, oil refining and pulp and paper industries, as well as other high purity sources

Leeson, D., Dowell, N. M., Shah, N., Petit, C., & Fennell, P. S. (2017) · International journal of greenhouse gas control · doi:10.1016/j.ijggc.2017.03.020 · Cited by 616

The relation between ductility and stacking fault energies in Mg and Mg–Y alloys

Sandlöbes, S., Friák, M., Zaefferer, S., Dick, A. L. W., Yi, S. B., Letzig, D., Pei, Z., Zhu, L., Neugebauer, J., & Raabe, D. (2012) · Acta Materialia · doi:10.1016/j.actamat.2012.02.006 · Cited by 612

Microstructure-sensitive computational modeling of fatigue crack formation

McDowell, D. L., & Dunne, F. P. E. (2010) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2010.01.003 · Cited by 602

Enumeration of the hydrogen-enhanced localized plasticity mechanism for hydrogen embrittlement in structural materials

Martin, M. L., Dadfarnia, M., Nagao, A., Wang, S., & Sofronis, P. (2018) · Acta Materialia · doi:10.1016/j.actamat.2018.12.014 · Cited by 587

Elastocaloric Effect Associated with the Martensitic Transition in Shape-Memory Alloys

Bonnot, E., Romero, R., Mañosa, L., Vives, E., & Planes, A. (2008) · Physical Review Letters · doi:10.1103/physrevlett.100.125901 · Cited by 575

Strain localization and damage in dual phase steels investigated by coupled in-situ deformation experiments and crystal plasticity simulations

Taşan, C. C., Hoefnagels, J. P. M., Diehl, M., Yan, D., Roters, F., & Raabe, D. (2014) · International Journal of Plasticity · doi:10.1016/j.ijplas.2014.06.004 · Cited by 572

Precipitation evolution in Al–0.1Sc, Al–0.1Zr and Al–0.1Sc–0.1Zr (at.%) alloys during isochronal aging

Knipling, K. E., Karnesky, R. A., Lee, C. P., Dunand, D. C., & Seidman, D. N. (2010) · Acta Materialia · doi:10.1016/j.actamat.2010.05.054 · Cited by 569

Multistage strain hardening through dislocation substructure and twinning in a high strength and ductile weight-reduced Fe–Mn–Al–C steel

Gutiérrez‐Urrutia, I., & Raabe, D. (2012) · Acta Materialia · doi:10.1016/j.actamat.2012.07.018 · Cited by 538

Mechanical properties of Al(Sc,Zr) alloys at ambient and elevated temperatures

Fuller, C. B., Seidman, D. N., & Dunand, D. C. (2003) · Acta Materialia · doi:10.1016/s1359-6454(03)00320-3 · Cited by 534

On the materials basis of modern society

Graedel, T. E., Harper, E. M., Nassar, N. T., & Reck, B. K. (2013) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1312752110 · Cited by 531

Alloy design for intrinsically ductile refractory high-entropy alloys

Sheikh, S., Shafeie, S., Hu, Q., Ahlström, J., Persson, C., Veselý, J., Zýka, J., Klement, U., & Guo, S. L. (2016) · Journal of Applied Physics · doi:10.1063/1.4966659 · Cited by 512

Ultralow-fatigue shape memory alloy films

Chluba, C., Ge, W., de Miranda, R. L., Strobel, J., Kienle, L., Quandt, E., & Wuttig, M. R. (2015) · Science · doi:10.1126/science.1261164 · Cited by 510

Options for Achieving a 50% Cut in Industrial Carbon Emissions by 2050

Allwood, J. M., Cullen, J. M., & Milford, R. L. (2010) · Environmental Science & Technology · doi:10.1021/es902909k · Cited by 509

Mechanistic origin of high strength in refractory BCC high entropy alloys up to 1900K

Maresca, F., & Curtin, W. A. (2019) · Acta Materialia · doi:10.1016/j.actamat.2019.10.015 · Cited by 507

Selective laser melting of a high strength Al Mn Sc alloy: Alloy design and strengthening mechanisms

Jia, Q., Rometsch, P. A., Kürnsteiner, P., Qi, C., Huang, A. J., Weyland, M., BOURGEOIS, L. N., & Wu, X. (2019) · Acta Materialia · doi:10.1016/j.actamat.2019.04.014 · Cited by 492

Mineral Commodity Summaries 2019

Survey, U. S. G. (2019) · Mineral Commodity Summaries · doi:10.3133/70202434 · Cited by 489

Hydrogen-assisted decohesion and localized plasticity in dual-phase steel

Koyama, M., Taşan, C. C., Akiyama, E., Tsuzaki, K., & Raabe, D. (2014) · Acta Materialia · doi:10.1016/j.actamat.2014.01.048 · Cited by 485

Coarsening resistance at 400 °C of precipitation-strengthened Al–Zr–Sc–Er alloys

Booth-Morrison, C., Dunand, D. C., & Seidman, D. N. (2011) · Acta Materialia · doi:10.1016/j.actamat.2011.07.057 · Cited by 485

The Production of Ductile Titanium

Kroll, W. J. (1940) · Transactions of The Electrochemical Society · doi:10.1149/1.3071290 · Cited by 475

By-product metals are technologically essential but have problematic supply

Nassar, N. T., Graedel, T. E., & Harper, E. M. (2015) · Science Advances · doi:10.1126/sciadv.1400180 · Cited by 464

Enhanced reversibility and unusual microstructure of a phase-transforming material

Song, Y., Chen, X., Dabade, V., Shield, T. W., & James, R. D. (2013) · Nature · doi:10.1038/nature12532 · Cited by 460

A review on the effect of rare-earth elements on texture evolution during processing of magnesium alloys

Imandoust, A., Barrett, C. D., Al‐Samman, T., Inal, K., & Kadiri, H. E. (2016) · Journal of Materials Science · doi:10.1007/s10853-016-0371-0 · Cited by 458

Sustainable materials with both eyes open

(2013) · Choice Reviews Online · doi:10.5860/choice.50-3871 · Cited by 435

A regenerative elastocaloric heat pump

Tušek, J., Engelbrecht, K. L., Eriksen, D., Dall’Olio, S., Tušek, J., & Pryds, N. (2016) · Nature Energy · doi:10.1038/nenergy.2016.134 · Cited by 435

Criteria for Predicting the Formation of Single-Phase High-Entropy Alloys

Troparevsky, M. C., Morris, J. R., Kent, P. R. C., Lupini, A. R., & Stocks, G. M. (2015) · Physical Review X · doi:10.1103/physrevx.5.011041 · Cited by 414

Bone-like crack resistance in hierarchical metastable nanolaminate steels

Koyama, M., Zhang, Z., Wang, M., Ponge, D., Raabe, D., Tsuzaki, K., Noguchi, H., & Taşan, C. C. (2017) · Science · doi:10.1126/science.aal2766 · Cited by 410

Advances in Gammalloy Materials–Processes–Application Technology: Successes, Dilemmas, and Future

Kim, Y., & Kim, S.-L. (2018) · JOM · doi:10.1007/s11837-018-2747-x · Cited by 407

A review of dwell sensitive fatigue in titanium alloys: the role of microstructure, texture and operating conditions

Bache, M. R. (2003) · International Journal of Fatigue · doi:10.1016/s0142-1123(03)00145-2 · Cited by 406

Formation and reversion of stress induced martensite in Ti-10V-2Fe-3Al

Duerig, T. W., Albrecht, J., Richter, D., & Fischer, P. (1982) · Acta Metallurgica · doi:10.1016/0001-6160(82)90137-7 · Cited by 392

Identification of Quaternary Shape Memory Alloys with Near‐Zero Thermal Hysteresis and Unprecedented Functional Stability

Zarnetta, R., Takahashi, R., Young, M. L., Savan, A., Furuya, Y., Thienhaus, S., Maaß, B., Rahim, M., Frenzel, J. A., Brunken, H., et al. (2010) · Advanced Functional Materials · doi:10.1002/adfm.200902336 · Cited by 389

The use of the natural-gas pipeline infrastructure for hydrogen transport in a changing market structure

Haeseldonckx, D., & D’haeseleer, W. D. (2006) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2006.10.018 · Cited by 383

A low-cost hierarchical nanostructured beta-titanium alloy with high strength

Devaraj, A., Joshi, V. V., Srivastava, A., Manandhar, S., Moxson, V. S., Duz, V. A., & Lavender, C. A. (2016) · Nature Communications · doi:10.1038/ncomms11176 · Cited by 366

Ambient- and high-temperature mechanical properties of isochronally aged Al–0.06Sc, Al–0.06Zr and Al–0.06Sc–0.06Zr (at.%) alloys

Knipling, K. E., Seidman, D. N., & Dunand, D. C. (2010) · Acta Materialia · doi:10.1016/j.actamat.2010.10.017 · Cited by 365

Scientific principles of making an alloying addition of scandium to aluminium alloys

Davydov, V. G., Rostova, T. D., Zakharov, V. V., Filatov, Y. A., & Elagin, V. I. (2000) · Materials Science and Engineering A · doi:10.1016/s0921-5093(99)00652-8 · Cited by 364

Medium Mn transformation-induced plasticity steels: Recent progress and challenges

Suh, D., & Kim, S.-J. (2016) · Scripta Materialia · doi:10.1016/j.scriptamat.2016.07.013 · Cited by 362

Recent Advances in Nanostructured Thermoelectric Half-Heusler Compounds

Xie, W., Weidenkaff, A., Tang, X., Zhang, Q., Poon, S. J., & Tritt, T. (2012) · Nanomaterials · doi:10.3390/nano2040379 · Cited by 358

Deformation and creep modeling in polycrystalline Ti–6Al alloys

Hasija, V., Ghosh, S., Mills, M. J., & Joseph, D. S. (2003) · Acta Materialia · doi:10.1016/s1359-6454(03)00289-1 · Cited by 353

Quantitative study on the precipitation behavior of dispersoids in DC-cast AA3003 alloy during heating and homogenization

Li, Y. J., & ARNBERG, L. (2003) · Acta Materialia · doi:10.1016/s1359-6454(03)00160-5 · Cited by 347

Alternative emerging ironmaking technologies for energy-efficiency and carbon dioxide emissions reduction: A technical review

Hasanbeigi, A., Arens, M., & Price, L. (2014) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2014.02.031 · Cited by 342

Ductility improvement of Mg alloys by solid solution: Ab initio modeling, synthesis and mechanical properties

Sandlöbes, S., Pei, Z., Friák, M., Zhu, L., Wang, F., Zaefferer, S., Raabe, D., & Neugebauer, J. (2014) · Acta Materialia · doi:10.1016/j.actamat.2014.02.011 · Cited by 339

Energy barriers and hysteresis in martensitic phase transformations

Zhang, Z., James, R. D., & Müller, S. (2009) · Acta Materialia · doi:10.1016/j.actamat.2009.05.034 · Cited by 339

The Elastocaloric Effect: A Way to Cool Efficiently

Tušek, J., Engelbrecht, K. L., Millán‐Solsona, R., Mañosa, L., Vives, E., Mikkelsen, L. P., & Pryds, N. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500361 · Cited by 333

Effect of grain boundaries on texture formation during dynamic recrystallization of magnesium alloys

Barrett, C. D., Imandoust, A., Oppedal, A. L., Inal, K., Tschopp, M. A., & Kadiri, H. E. (2017) · Acta Materialia · doi:10.1016/j.actamat.2017.01.063 · Cited by 332

Multiscale mechanics of TRIP-assisted multiphase steels: I. Characterization and mechanical testing

Jacques, P., Furnémont, Q., Lani, F., Pardoen, T., & Delannay, F. (2007) · Acta Materialia · doi:10.1016/j.actamat.2007.02.029 · Cited by 332

Precipitation evolution in Al–Zr and Al–Zr–Ti alloys during aging at 450–600°C

Knipling, K. E. (2008) · Acta Materialia · doi:10.1016/j.actamat.2007.11.011 · Cited by 329

Temporal evolution of the nanostructure of Al(Sc,Zr) alloys: Part I – Chemical compositions of Al(ScZr) precipitates

Fuller, C. B., MURRAY, J., & Seidman, D. N. (2005) · Acta Materialia · doi:10.1016/j.actamat.2005.08.016 · Cited by 324

Linear complexions: Confined chemical and structural states at dislocations

Kuzmina, M., Herbig, M., Ponge, D., Sandlöbes, S., & Raabe, D. (2015) · Science · doi:10.1126/science.aab2633 · Cited by 311

Phase Equilibria and Microstructure on γ′ Phase in Co-Ni-Al-W System

Shinagawa, K., Omori, T., Sato, J., Oikawa, K., Ohnuma, I., Kainuma, R., & Ishida, K. (2008) · MATERIALS TRANSACTIONS · doi:10.2320/matertrans.mer2008073 · Cited by 311

Environmental Dimensions of Additive Manufacturing: Mapping Application Domains and Their Environmental Implications

Kellens, K., Baumers, M., Gutowski, T. G., Flanagan, W., Lifset, R., & Duflou, J. R. (2017) · Journal of Industrial Ecology · doi:10.1111/jiec.12629 · Cited by 310

Precipitation evolution in Al–Zr and Al–Zr–Ti alloys during isothermal aging at 375–425°C

Knipling, K. E., Dunand, D. C., & Seidman, D. N. (2007) · Acta Materialia · doi:10.1016/j.actamat.2007.09.004 · Cited by 308

On the mechanism of fatigue failure in the superlong life regime (N>107 cycles). Part 1: influence of hydrogen trapped by inclusions

MURAKAMI, Y., NOMOTO, T., Ueda, T., & Murakami, Y. (2000) · Fatigue & Fracture of Engineering Materials & Structures · doi:10.1046/j.1460-2695.2000.00328.x · Cited by 308

Smaller is less stable: Size effects on twinning vs. transformation of reverted austenite in TRIP-maraging steels

Wang, M.-M., Taşan, C. C., Ponge, D., Kostka, A., & Raabe, D. (2014) · Acta Materialia · doi:10.1016/j.actamat.2014.07.020 · Cited by 303

Phase Stability of Low-Density, Multiprincipal Component Alloys Containing Aluminum, Magnesium, and Lithium

Yang, X. M., Chen, S.-H., Cotton, J. D., & Zhang, Y. (2014) · JOM · doi:10.1007/s11837-014-1059-z · Cited by 297

Primary Dystonia Is More Responsive than Secondary Dystonia to Pallidal Interventions: Outcome after Pallidotomy or Pallidal Deep Brain Stimulation

Eltahawy, H. A., Saint‐Cyr, J. A., Giladi, N., Lang, A. E., & Lozano, A. M. (2004) · Neurosurgery · doi:10.1227/01.neu.0000108643.94730.21 · Cited by 295

From high-entropy alloys to complex concentrated alloys

Gorsse, S., Couzinié, J., & Miracle, D. B. (2018) · Comptes Rendus Physique · doi:10.1016/j.crhy.2018.09.004 · Cited by 293

Twin recrystallization mechanisms and exceptional contribution to texture evolution during annealing in a magnesium alloy

Guan, D., Rainforth, W. M., Ma, L., Wynne, B. P., & Gao, J. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.12.058 · Cited by 292

Elastocaloric cooling capacity of shape memory alloys – Role of deformation temperatures, mechanical cycling, stress hysteresis and inhomogeneity of transformation

Wu, Y., Ertekin, E., & Huseyin Sehitoglu, B. (2017) · Acta Materialia · doi:10.1016/j.actamat.2017.06.012 · Cited by 292

Precipitation of partially coherent α-Al(Mn,Fe)Si dispersoids and their strengthening effect in AA 3003 alloy

Li, Y., Muggerud, A. M. F., Olsen, A., & Furu, T. (2011) · Acta Materialia · doi:10.1016/j.actamat.2011.11.003 · Cited by 291

Engineering atomic-level complexity in high-entropy and complex concentrated alloys

Oh, H. S., Kim, S. J., Odbadrakh, K., Ryu, W. H., Yoon, K. N., Mu, S., Körmann, F., Ikeda, Y., Taşan, C. C., Raabe, D., et al. (2019) · Nature Communications · doi:10.1038/s41467-019-10012-7 · Cited by 291

L12-Strengthened Cobalt-Base Superalloys

Suzuki, A., Inui, H., & Pollock, T. M. (2015) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070214-021043 · Cited by 290

Elastocaloric effect of Ni-Ti wire for application in a cooling device

Tušek, J., Engelbrecht, K. L., Mikkelsen, L. P., & Pryds, N. (2015) · Journal of Applied Physics · doi:10.1063/1.4913878 · Cited by 287

New Co-based γ-γ′ high-temperature alloys

Pollock, T. M., Dibbern, J. C., Tsunekane, M., Zhu, J. H., & Suzuki, A. (2010) · JOM · doi:10.1007/s11837-010-0013-y · Cited by 285

Mechanism of fatigue failure in ultralong life regime

MURAKAMI, Y., YOKOYAMA, N. N., & Nagata, J. (2002) · Fatigue & Fracture of Engineering Materials & Structures · doi:10.1046/j.1460-2695.2002.00576.x · Cited by 283

Too cool to work

Moya, X., Defaÿ, E., Heine, V., & Mathur, N. D. (2015) · Nature Physics · doi:10.1038/nphys3271 · Cited by 282

A brief history of CALPHAD

Spencer, P. J. (2007) · Calphad · doi:10.1016/j.calphad.2007.10.001 · Cited by 279

Role of ω phase in the formation of extremely refined intragranular α precipitates in metastable β-titanium alloys

Zheng, Y., Williams, R. E. A., Wang, D., Shi, R., Nag, S., Kami, P., Sosa, J. M., Banerjee, R., Wang, Y., & Fraser, H. L. (2015) · Acta Materialia · doi:10.1016/j.actamat.2015.11.020 · Cited by 279

Flow stress anomalies in γ/γ′ two-phase Co–Al–W-base alloys

Suzuki, A., DeNolf, G. C., & Pollock, T. M. (2006) · Scripta Materialia · doi:10.1016/j.scriptamat.2006.10.039 · Cited by 274

Phase selection motifs in High Entropy Alloys revealed through combinatorial methods: Large atomic size difference favors BCC over FCC

Kube, S. A., Sohn, S., Uhl, D., Datye, A., Mehta, A., & Schroers, J. (2019) · Acta Materialia · doi:10.1016/j.actamat.2019.01.023 · Cited by 272

High resolution in situ mapping of microstrain and microstructure evolution reveals damage resistance criteria in dual phase steels

Yan, D., Taşan, C. C., & Raabe, D. (2015) · Acta Materialia · doi:10.1016/j.actamat.2015.05.038 · Cited by 271

A new anode material for oxygen evolution in molten oxide electrolysis

Allanore, A., Yin, L., & Sadoway, D. R. (2013) · Nature · doi:10.1038/nature12134 · Cited by 268

The influence of Sc solute partitioning on the microalloying effect and mechanical properties of Al-Cu alloys with minor Sc addition

Yang, C., Zhang, P., Shao, D., Wang, R. H., Cao, L., Zhang, J., Liu, G., Chen, B. A., & Sun, J. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.08.013 · Cited by 266

Improving aging and creep resistance in a dilute Al–Sc alloy by microalloying with Si, Zr and Er

Vo, N. Q., Dunand, D. C., & Seidman, D. N. (2013) · Acta Materialia · doi:10.1016/j.actamat.2013.10.008 · Cited by 265

Temporal evolution of the nanostructure of Al(Sc,Zr) alloys: Part II-coarsening of Al(ScZr) precipitates

Fuller, C. B., & Seidman, D. N. (2005) · Acta Materialia · doi:10.1016/j.actamat.2005.08.015 · Cited by 265

Quantification of the effect of transformation-induced geometrically necessary dislocations on the flow-curve modelling of dual-phase steels

Ramazani, A., Mukherjee, K., Schwedt, A., Goravanchi, P., Prahl, U., & Bleck, W. P. (2012) · International Journal of Plasticity · doi:10.1016/j.ijplas.2012.11.003 · Cited by 264

Use of biomass in integrated steelmaking – Status quo, future needs and comparison to other low-CO2 steel production technologies

Suopajärvi, H., Umeki, K., Mousa, E. A., Hedayati, A., Romar, H., Kemppainen, A., Wang, C., Phounglamcheik, A., Tuomikoski, S., Norberg, N., et al. (2018) · Applied Energy · doi:10.1016/j.apenergy.2018.01.060 · Cited by 250

Synergetic effect of Er and Zr on the precipitation hardening of Al–Er–Zr alloy

Wen, S., Gao, K., Li, Y., Huang, H., & Nie, Z. (2011) · Scripta Materialia · doi:10.1016/j.scriptamat.2011.06.033 · Cited by 250

Large temperature span and giant refrigerant capacity in elastocaloric Cu-Zn-Al shape memory alloys

Mañosa, L., Jarque-Farnos, S., Vives, E., & Planes, A. (2013) · Applied Physics Letters · doi:10.1063/1.4832339 · Cited by 247

Correction: Corrigendum: ChEC-seq kinetics discriminates transcription factor binding sites by DNA sequence and shape in vivo

Zentner, G. E., Kasinathan, S., Xin, B., Rohs, R., & Henikoff, S. (2015) · Nature Communications · doi:10.1038/ncomms10264 · Cited by 241

Elastocaloric cooling potential of NiTi, Ni2FeGa, and CoNiAl

Pataky, G. J., Ertekin, E., & Huseyin Sehitoglu, B. (2015) · Acta Materialia · doi:10.1016/j.actamat.2015.06.011 · Cited by 239

Super-elastic titanium alloy with unstable plastic deformation

Hao, Y., Li, S. J., Sun, S. Y., Zheng, C., Hu, Q., & Yang, R. (2005) · Applied Physics Letters · doi:10.1063/1.2037192 · Cited by 237

Strong and ductile age-hardening Mg-Al-Ca-Mn alloy that can be extruded as fast as aluminum alloys

Nakata, T., Xu, C., AJIMA, R., Shimizu, K., HANAKI, S., Sasaki, T., Ma, L., Hono, K., & Kamado, S. (2017) · Acta Materialia · doi:10.1016/j.actamat.2017.03.046 · Cited by 235

Role of silicon in accelerating the nucleation of Al3(Sc,Zr) precipitates in dilute Al–Sc–Zr alloys

Booth-Morrison, C., Mao, Z., Diaz, M. C., Dunand, D. C., Wolverton, C. M., & Seidman, D. N. (2012) · Acta Materialia · doi:10.1016/j.actamat.2012.05.036 · Cited by 229

Spin-driven ordering of Cr in the equiatomic high entropy alloy NiFeCrCo

Niu, C., Zaddach, A. J., Oni, A. A., Sang, X., Hurt, J. W., LeBeau, J. M., Koch, C. C., & Irving, D. L. (2015) · Applied Physics Letters · doi:10.1063/1.4918996 · Cited by 226

How magnesium accommodates local deformation incompatibility: A high-resolution digital image correlation study

Orozco‐Caballero, A., Lunt, D., Robson, J. D., & da Fonseca, J. Q. (2017) · Acta Materialia · doi:10.1016/j.actamat.2017.05.040 · Cited by 224

Influence of direct reduced iron on the energy balance of the electric arc furnace in steel industry

Kirschen, M., Badr, K., & Pfeifer, H. (2011) · Energy · doi:10.1016/j.energy.2011.07.050 · Cited by 222

Individual effect of recrystallisation nucleation sites on texture weakening in a magnesium alloy: Part 1- double twins

Guan, D., Rainforth, W. M., Gao, J., Sharp, J. H., Wynne, B. P., & Ma, L. (2017) · Acta Materialia · doi:10.1016/j.actamat.2017.06.015 · Cited by 220

Nucleation and Precipitation Strengthening in Dilute Al-Ti and Al-Zr Alloys

Knipling, K. E., Dunand, D. C., & Seidman, D. N. (2007) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-007-9283-6 · Cited by 217

Waste energy recovery and energy efficiency improvement in China’s iron and steel industry

Zhang, Q., Zhao, X., Lu, H., Ni, T., & Li, Y. (2017) · Applied Energy · doi:10.1016/j.apenergy.2017.01.072 · Cited by 217

A new class of high strength high temperature Cobalt based γ–γ′ Co–Mo–Al alloys stabilized with Ta addition

Makineni, S. K., Samanta, A., Rojhirunsakool, T., Alam, T., Nithin, B., Singh, A. K., Banerjee, R., & Chattopadhyay, K. (2015) · Acta Materialia · doi:10.1016/j.actamat.2015.06.034 · Cited by 216

Development and applications of GREET 2.7 -- The Transportation Vehicle-CycleModel.

Burnham, A., Wang, M. Q., & Wu, Y. (2006) · OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) · doi:10.2172/898530 · Cited by 215

Precipitation of the metastable cubic Al3Zr-phase in subperitectic Al-Zr alloys

Nes, E. (1972) · Acta Metallurgica · doi:10.1016/0001-6160(72)90005-3 · Cited by 210

Rapid alloy prototyping: Compositional and thermo-mechanical high throughput bulk combinatorial design of structural materials based on the example of 30Mn–1.2C–xAl triplex steels

Springer, H., & Raabe, D. (2012) · Acta Materialia · doi:10.1016/j.actamat.2012.05.017 · Cited by 209

Environmental Implications of Future Demand Scenarios for Metals: Methodology and Application to the Case of Seven Major Metals

van der Voet, E., van Oers, L. F. C. M., Verboon, M., & Kuipers, K. (2018) · Journal of Industrial Ecology · doi:10.1111/jiec.12722 · Cited by 199

Creep-induced planar defects in L12-containing Co- and CoNi-base single-crystal superalloys

Titus, M. S., Eggeler, Y. M., Suzuki, A., & Pollock, T. M. (2014) · Acta Materialia · doi:10.1016/j.actamat.2014.08.033 · Cited by 199

Observations on the faceted initiation site in the dwell-fatigue tested ti-6242 alloy: Crystallographic orientation and size effects

Sinha, V., Mills, M. J., Williams, J. C., & Spowart, J. E. (2006) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-006-0095-x · Cited by 198

Handbook of recycling : state-of-the-art for practitioners, analysts, and scientists

Worrell, E., & Reuter, M. A. (2014) · Cited by 196

Dual Phase Steels

Rashid, M. S. (1981) · Annual Review of Materials Science · doi:10.1146/annurev.ms.11.080181.001333 · Cited by 195

Microstructure and mechanical properties of a precipitation-strengthened Al-Zr-Sc-Er-Si alloy with a very small Sc content

Luca, A. D., Dunand, D. C., & Seidman, D. N. (2017) · Acta Materialia · doi:10.1016/j.actamat.2017.10.040 · Cited by 194

Synthesis of a new tungsten-free γ–γ′ cobalt-based superalloy by tuning alloying additions

Makineni, S. K., Nithin, B., & Chattopadhyay, K. (2014) · Acta Materialia · doi:10.1016/j.actamat.2014.11.016 · Cited by 190

A rare-earth free magnesium alloy with improved intrinsic ductility

Sandlöbes, S., Friák, M., Korte‐Kerzel, S., Pei, Z., Neugebauer, J., & Raabe, D. (2017) · Scientific Reports · doi:10.1038/s41598-017-10384-0 · Cited by 190

Microstructural banding effects clarified through micrographic digital image correlation

Taşan, C. C., Hoefnagels, J. P. M., & Geers, M. G. D. (2010) · Scripta Materialia · doi:10.1016/j.scriptamat.2010.02.014 · Cited by 189

Advanced Aluminum Alloys Containing Scandium: Structure and Properties

Toropova, L. S., Eskin, D. G., Kharakterova, M. L., & Dobatkina, T. V. (1998) · Cited by 184

Critical Assessment 14: High entropy alloys and their development as structural materials

Miracle, D. B. (2015) · Materials Science and Technology · doi:10.1179/1743284714y.0000000749 · Cited by 182

Impacts of Vehicle Weight Reduction via Material Substitution on Life-Cycle Greenhouse Gas Emissions

Kelly, J. C., Sullivan, J. L., Burnham, A., & Elgowainy, A. (2015) · Environmental Science & Technology · doi:10.1021/acs.est.5b03192 · Cited by 182

Impurity levels and fatigue lives of pseudoelastic NiTi shape memory alloys

Rahim, M., Frenzel, J. A., Frotscher, M., Pfetzing‐Micklich, J., Steegmüller, R., Wohlschlögel, M., Mughrabi, H., & Eggeler, G. (2013) · Acta Materialia · doi:10.1016/j.actamat.2013.02.054 · Cited by 180

Effect of Er additions on ambient and high-temperature strength of precipitation-strengthened Al–Zr–Sc–Si alloys

Booth-Morrison, C., Seidman, D. N., & Dunand, D. C. (2012) · Acta Materialia · doi:10.1016/j.actamat.2012.02.030 · Cited by 180

Industrial energy use and carbon emissions reduction in the iron and steel sector: A UK perspective

Griffin, P. W., & Hammond, G. P. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.04.148 · Cited by 179

Observations of Facet Formation in Near-α Titanium and Comments on the Role of Hydrogen

Pilchak, A. L., & Williams, J. C. (2010) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-010-0507-9 · Cited by 178

High resolution energy dispersive spectroscopy mapping of planar defects in L12-containing Co-base superalloys

Titus, M. S., Mottura, A., Viswanathan, G. B., Suzuki, A., Mills, M. J., & Pollock, T. M. (2015) · Acta Materialia · doi:10.1016/j.actamat.2015.01.050 · Cited by 178

Material Availability and the Supply Chain: Risks, Effects, and Responses

Alonso, E., Gregory, J. R., Field, F. R., & Kirchain, R. (2007) · Environmental Science & Technology · doi:10.1021/es070159c · Cited by 178

Bake-hardenable Mg–Al–Zn–Mn–Ca sheet alloy processed by twin-roll casting

Bian, M., Sasaki, T., Nakata, T., Yoshida, Y., Kawabe, N., Kamado, S., & Hono, K. (2018) · Acta Materialia · doi:10.1016/j.actamat.2018.07.057 · Cited by 177

A new tungsten-free γ–γ’ Co–Al–Mo–Nb-based superalloy

Makineni, S. K., Nithin, B., & Chattopadhyay, K. (2014) · Scripta Materialia · doi:10.1016/j.scriptamat.2014.11.009 · Cited by 176

Coarsening kinetics of nanoscale Al3Sc precipitates in an Al–Mg–Sc alloy

Marquis, E. A., & Seidman, D. N. (2005) · Acta Materialia · doi:10.1016/j.actamat.2005.05.025 · Cited by 176

Transition of Future Energy System Infrastructure; through Power-to-Gas Pathways

Maroufmashat, A., & Fowler, M. W. (2017) · Energies · doi:10.3390/en10081089 · Cited by 174

Some aspects of short-range order

Cohen, J. B., & Fine, M. E. (1962) · Journal de physique · doi:10.1051/jphysrad:019620023010074901 · Cited by 174

Effect of Scandium on the Structure and Properties of Aluminum Alloys

Zakharov, V. V. (2003) · Metal Science and Heat Treatment · doi:10.1023/a:1027368032062 · Cited by 171

Dispersoid strengthening of a high temperature Al–Si–Cu–Mg alloy via Mo addition

Farkoosh, A. R., Chen, X. G., & Pekguleryuz, M. (2014) · Materials Science and Engineering A · doi:10.1016/j.msea.2014.10.004 · Cited by 171

Hydrogen: Its Future Role in the Nation's Energy Economy

Winsche, W. E., Hoffman, K. C., & Salzano, F. J. (1973) · Science · doi:10.1126/science.180.4093.1325 · Cited by 170

Erbium and ytterbium solubilities and diffusivities in aluminum as determined by nanoscale characterization of precipitates

van Dalen, M. E., Karnesky, R. A., Cabotaje, J. R., Dunand, D. C., & Seidman, D. N. (2009) · Acta Materialia · doi:10.1016/j.actamat.2009.05.007 · Cited by 170

Effect of Mg addition on the creep and yield behavior of an Al–Sc alloy

Marquis, E. A., Seidman, D. N., & Dunand, D. C. (2003) · Acta Materialia · doi:10.1016/s1359-6454(03)00288-x · Cited by 170

Planar defect formation in the γ′ phase during high temperature creep in single crystal CoNi-base superalloys

Eggeler, Y. M., Müller, J. M., Titus, M. S., Suzuki, A., Pollock, T. M., & Spiecker, E. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.03.077 · Cited by 170

Assessing the potential of yield improvements, through process scrap reduction, for energy and CO2 abatement in the steel and aluminium sectors

Milford, R. L., Allwood, J. M., & Cullen, J. M. (2011) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2011.05.021 · Cited by 169

A study of microstructure-driven strain localizations in two-phase polycrystalline HCP/BCC composites using a multi-scale model

Ardeljan, M., Knežević, M., Nizolek, T. J., Beyerlein, I. J., Mara, N. A., & Pollock, T. M. (2015) · International Journal of Plasticity · doi:10.1016/j.ijplas.2015.06.003 · Cited by 168

A Comparative Study on Dwell Fatigue of Ti-6Al-2Sn-4Zr-xMo (x = 2 to 6) Alloys on a Microstructure-Normalized Basis

Qiu, J., Ma, Y., Lei, J., Liu, Y., Huang, A. J., Rugg, D. J., & Yang, R. (2014) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-014-2541-5 · Cited by 168

What Gets Recycled: An Information Theory Based Model for Product Recycling

Dahmus, J. B., & Gutowski, T. G. (2007) · Environmental Science & Technology · doi:10.1021/es062254b · Cited by 165

The effect of rare earth element segregation on grain boundary energy and mobility in magnesium and ensuing texture weakening

Barrett, C. D., Imandoust, A., & Kadiri, H. E. (2017) · Scripta Materialia · doi:10.1016/j.scriptamat.2017.11.004 · Cited by 164

The effect of alloy composition on instabilities in the β phase of titanium alloys

Zheng, Y., Williams, R. E. A., Nag, S., Banerjee, R., Fraser, H. L., & Banerjee, D. (2016) · Scripta Materialia · doi:10.1016/j.scriptamat.2016.01.024 · Cited by 163

Grain Boundary Segregation of Rare-Earth Elements in Magnesium Alloys

Robson, J. D., Haigh, S. J., Davis, B. B., & Griffiths, D. (2015) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-015-3199-3 · Cited by 159

Nonbasal Slip Systems Enable a Strong and Ductile Hexagonal-Close-Packed High-Entropy Phase

Bu, Y., Li, Z., Liu, J., Wang, H., Raabe, D., & Yang, W. (2019) · Physical Review Letters · doi:10.1103/physrevlett.122.075502 · Cited by 157

Effect of retained austenite stability and morphology on the hydrogen embrittlement susceptibility in quenching and partitioning treated steels

Zhu, X., Zhang, K., Li, W., & Jin, X. (2016) · Materials Science and Engineering A · doi:10.1016/j.msea.2016.02.026 · Cited by 154

Chapter 63 Dislocations and high-temperature plastic deformation of superalloy single crystals

Pollock, T. M., & Field, R. D. (2002) · Dislocations in solids · doi:10.1016/s1572-4859(02)80014-6 · Cited by 152

Effects of substituting rare-earth elements for scandium in a precipitation-strengthened Al–0.08at. %Sc alloy

Karnesky, R. A., van Dalen, M. E., Dunand, D. C., & Seidman, D. N. (2006) · Scripta Materialia · doi:10.1016/j.scriptamat.2006.05.021 · Cited by 152

Effects of composition and microstructure on the abrasive wear performance of quenched wear resistant steels

Ojala, N., Valtonen, K., Heino, V., Kallio, M., Aaltonen, J., Siitonen, P., & Kuokkala, V. (2014) · Wear · doi:10.1016/j.wear.2014.06.003 · Cited by 150

Thermodynamics cycle analysis and numerical modeling of thermoelastic cooling systems

Qian, S., Ling, J., Hwang, Y., Radermacher, R., & Takeuchi, I. (2015) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2015.04.001 · Cited by 150

Enhanced dispersoid precipitation and dispersion strengthening in an Al alloy by microalloying with Cd

Qian, F., Jin, S., Sha, G., & Li, Y. (2018) · Acta Materialia · doi:10.1016/j.actamat.2018.07.001 · Cited by 149

On the origin of a remarkable increase in the strength and stability of an Al rich Al-Ni eutectic alloy by Zr addition

Pandey, P., Makineni, S. K., Gault, B., & Chattopadhyay, K. (2019) · Acta Materialia · doi:10.1016/j.actamat.2019.03.025 · Cited by 149

Three-body abrasive wear of fine pearlite, nanostructured bainite and martensite

Bakshi, S. D., Shipway, P. H., & Bhadeshia, H. K. D. H. (2013) · Wear · doi:10.1016/j.wear.2013.09.008 · Cited by 148

Recycling

Worrell, E., & Reuter, M. A. (2014) · Elsevier eBooks · doi:10.1016/b978-0-12-396459-5.00001-5 · Cited by 147

Optimization of hardening of Al–Zr–Sc cast alloys

Белов, Н. А., Alabin, A. N., Eskin, D. G., & Istomin-Kastrovskii, V. V. (2006) · Journal of Materials Science · doi:10.1007/s10853-006-0265-7 · Cited by 144

A novel type of Co–Ti–Cr-base γ / γ ′ superalloys with low mass density

Zenk, C. H., Povstugar, I., Li, R., Rinaldi, F., Neumeier, S., Raabe, D., & Göken, M. (2017) · Acta Materialia · doi:10.1016/j.actamat.2017.06.024 · Cited by 144

Cast near-eutectic Al-12.5 wt.% Ce alloy with high coarsening and creep resistance

Liu, Y., Michi, R. A., & Dunand, D. C. (2019) · Materials Science and Engineering A · doi:10.1016/j.msea.2019.138440 · Cited by 144

The indirect influence of the ω phase on the degree of refinement of distributions of the α phase in metastable β-Titanium alloys

Zheng, Y., Williams, R. E. A., Sosa, J. M., Alam, T., Wang, Y., Banerjee, R., & Fraser, H. L. (2015) · Acta Materialia · doi:10.1016/j.actamat.2015.09.053 · Cited by 141

A heat-treatable Mg–Al–Ca–Mn–Zn sheet alloy with good room temperature formability

Bian, M., Sasaki, T., Suh, B., Nakata, T., Kamado, S., & Hono, K. (2017) · Scripta Materialia · doi:10.1016/j.scriptamat.2017.05.034 · Cited by 140

Materials selection considerations for high entropy alloys

Fu, X., Schuh, C. A., & Olivetti, E. (2017) · Scripta Materialia · doi:10.1016/j.scriptamat.2017.03.014 · Cited by 138

Microstructure and mechanical properties of a 5754 aluminum alloy modified by Sc and Zr additions

Fuller, C. B., Krause, A. R., Dunand, D. C., & Seidman, D. N. (2002) · Materials Science and Engineering A · doi:10.1016/s0921-5093(02)00056-4 · Cited by 136

Multicomponent γ’-strengthened Co-based superalloys with increased solvus temperatures and reduced mass densities

Lass, E. A., Sauza, D. J., Dunand, D. C., & Seidman, D. N. (2018) · Acta Materialia · doi:10.1016/j.actamat.2018.01.034 · Cited by 136

High-strength Co–Al–V-base superalloys strengthened by γ′-Co3(Al,V) with high solvus temperature

Chen, Y., Wang, C., Ruan, J., Omori, T., Kainuma, R., Ishida, K., & Liu, X. (2019) · Acta Materialia · doi:10.1016/j.actamat.2019.03.013 · Cited by 133

Energy-efficient miniature-scale heat pumping based on shape memory alloys

Oßmer, H., Wendler, F., Gueltig, M., Lambrecht, F., Miyazaki, S., & Kohl, M. (2016) · Smart Materials and Structures · doi:10.1088/0964-1726/25/8/085037 · Cited by 132

Experimental study on high strain rate behavior of high strength 600–1000MPa dual phase steels and 1200MPa fully martensitic steels

Wang, W., Li, M., He, C., Wei, X., Wang, D., & Du, H. (2013) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2012.12.068 · Cited by 130

The study on the coarsening process and precipitation strengthening of Al3Er precipitate in Al–Er binary alloy

Zhang, Y., Gao, K., Wen, S., Huang, H., Nie, Z., & Zhou, D. (2014) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2014.04.093 · Cited by 129

Making sustainable aluminum by recycling scrap: The science of “dirty” alloys

Raabe, D., Ponge, D., Uggowitzer, P. J., Roscher, M., Paolantonio, M., Liu, C., Antrekowitsch, H., Kozeschnik, E., Seidman, D. N., Gault, B., et al. (2022) · Progress in Materials Science · doi:10.1016/j.pmatsci.2022.100947 · Cited by 685

The Materials Science behind Sustainable Metals and Alloys

Raabe, D. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00799 · Cited by 596

Fundamentals and comprehensive insights on pulsed laser synthesis of advanced materials for diverse photo- and electrocatalytic applications

Theerthagiri, J., Karuppasamy, K., Lee, S. J., Shwetharani, R., Kim, H.-S., Pasha, S. K. K., Ashokkumar, M., & Choi, M. Y. (2022) · Light: Science & Applications · doi:10.1038/s41377-022-00904-7 · Cited by 461

Wear-resistant CoCrNi multi-principal element alloy at cryogenic temperature

Ren, Y., Zhou, Q., Hua, D., Huang, Z., Li, Y., Jia, Q., Gumbsch, P., Greiner, C., Wang, H., & Liu, W. (2023) · 中国科学通报：英文版 · doi:10.1016/j.scib.2023.12.003 · Cited by 179

Manipulating Stacking Fault Energy to Achieve Crack Inhibition and Superior Strength–Ductility Synergy in an Additively Manufactured High‐Entropy Alloy

Niu, P., Li, R., Gan, K., Fan, Z., Yuan, T., & Han, C. (2024) · Advanced Materials · doi:10.1002/adma.202310160 · Cited by 149

Aluminium and its alloys; with experimental investigations

Self, E. D. (1887) · Journal of the Franklin Institute · doi:10.1016/0016-0032(87)90236-5

Dow's polymer enhancer speeds automotive cable production

(2006) · Additives for Polymers · doi:10.1016/s0306-3747(06)70528-0

Advances in Design by Metallic Materials: Synthesis, Characterization, Simulation and Applications

Fragassa, C., Épp, J., Lesiuk, G., & Zivkovic, M. (2021) · MDPI eBooks · doi:10.3390/books978-3-0365-0747-7

Material challenges in developing a sustainable metal processing infrastructure :

Iams, A. D., Zuback, J. S., Stoudt, M. R., & Campbell, C. E. (2025) · doi:10.6028/nist.sp.1500-32

Structural metal alloys: towards environmentally friendly materials

Meshalkin, V. P., Kolmakov, A. G., Nzioka, A. M., Bannykh, I. O., Sevostyanov, M. A., Konushkin, S. V., Kaplan, M. A., & Chistyakova, T. B. (2025) · Russian Chemical Reviews · doi:10.59761/rcr5165 · Cited by 4