The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Additive manufacturing of advanced ceramic materials
Open accessAbstract
Abstract Additive manufacturing (AM) has the potential to disrupt the ceramic industry by offering new opportunities to manufacture advanced ceramic components without the need for expensive tooling, thereby reducing production costs and lead times and increasing design freedom. Whilst the development and implementation of AM technologies in the ceramic industry has been slower than in the polymer and metal industries, there is now considerable interest in developing AM processes capable of producing defect-free, fully dense ceramic components. A large variety of AM technologies can be used to shape ceramics, but variable results have been obtained so far. Selecting the correct AM process for a given application not only depends on the requirements in terms of density, surface finish, size and geometrical complexity of the part, but also on the nature of the particular ceramic to be processed. This paper provides a detailed review of the current state-of-the-art in AM of advanced ceramics through a systematic evaluation of the capabilities of each AM technology, with an emphasis on reported results in terms of final density, surface finish and mechanical properties. An in-depth analysis of the opportunities, issues, advantages and limitations arising when processing advanced ceramics with each AM technology is also provided.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Metal Additive Manufacturing: A Review
Frazier, W. E. (2014) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-014-0958-z · Cited by 5,984
Gibson, I., Rosen, D., & Stucker, B. (2015) · doi:10.1007/978-1-4939-2113-3 · Cited by 3,299
Klocke, F., Klink, A., Veselovac, D., Aspinwall, D. K., Soo, S. L., Schmidt, M., Schilp, J., Levy, G., & Kruth, J.-P. (2014) · CIRP Annals · doi:10.1016/j.cirp.2014.05.004 · Cited by 417
Cited by
Wang, S., Ning, J., Zhu, L., Yang, Z., Yan, W., Dun, Y., Xue, P., Xu, P., Bose, S., & Bandyopadhyay, A. (2022) · Materials Today · doi:10.1016/j.mattod.2022.08.014 · Cited by 279
Design, printing, and engineering of regenerative biomaterials for personalized bone healthcare
Jia, Z., Xu, X., Zhu, D., & Zheng, Y. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2023.101072 · Cited by 176
Zhou, S., Liu, G., Wang, C., Zhang, Y., Yan, C., & Shi, Y. (2024) · Materials & Design · doi:10.1016/j.matdes.2024.112632 · Cited by 150
Novel approaches and biomaterials for bone tissue engineering: a focus on silk fibroin
Paladini, F., & Pollini, M. (2022) · Materials · doi:10.3390/ma15196952 · Cited by 51
Numerical Simulation of Sand Casting of Stainless Steel Pump Impeller
Jurković, K., Schauperl, Z., Šolić, S., & Bauer, B. (2024) · Metals · doi:10.3390/met14040435 · Cited by 9
Metadata
- Authors
- Lakhdar, Y., Tuck, C., Binner, J., Terry, A., & Goodridge, R.
- Venue
- Progress in Materials Science
- Publisher
- Elsevier BV
- Published
- 2021-02
- Volume
- 116
- Pages
- 100736
- ISSN
- 0079-6425 (ISSN-L)
- OpenAlex
- W3090120030
- Cited by
- 857
- References
- 3
- FWCI
- 29.64
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Additive manufacturing of advanced ceramic materials. https://app.cochat.ai/papers/10.1016/j.pmatsci.2020.100736
- The paper
- Lakhdar, Y., Tuck, C., Binner, J., Terry, A., & Goodridge, R. (2021). Additive manufacturing of advanced ceramic materials. Progress in Materials Science. https://doi.org/10.1016/j.pmatsci.2020.100736
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
