The DOI matches its Crossref record; 129 of the 129 references it cites were found in a registry or an index.
Additive manufacturing of advanced ceramic materials
Open accessAbstract
Abstract Additive manufacturing (AM) has the potential to disrupt the ceramic industry by offering new opportunities to manufacture advanced ceramic components without the need for expensive tooling, thereby reducing production costs and lead times and increasing design freedom. Whilst the development and implementation of AM technologies in the ceramic industry has been slower than in the polymer and metal industries, there is now considerable interest in developing AM processes capable of producing defect-free, fully dense ceramic components. A large variety of AM technologies can be used to shape ceramics, but variable results have been obtained so far. Selecting the correct AM process for a given application not only depends on the requirements in terms of density, surface finish, size and geometrical complexity of the part, but also on the nature of the particular ceramic to be processed. This paper provides a detailed review of the current state-of-the-art in AM of advanced ceramics through a systematic evaluation of the capabilities of each AM technology, with an emphasis on reported results in terms of final density, surface finish and mechanical properties. An in-depth analysis of the opportunities, issues, advantages and limitations arising when processing advanced ceramics with each AM technology is also provided.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
1 retracted
WITHDRAWN: Binder jet 3D printing – Process parameters, materials, properties, and challenges
Mostafaei, A., Elliott, A., Barnes, J. E., Cramer, C. L., Nandwana, P., & Chmielus, M. (2020) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100684 · Cited by 77
RetractedMetal Additive Manufacturing: A Review
Frazier, W. E. (2014) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-014-0958-z · Cited by 5,984
Gibson, I., Rosen, D., & Stucker, B. (2015) · doi:10.1007/978-1-4939-2113-3 · Cited by 3,299
Additive Manufacturing Technologies: Rapid Prototyping to Direct Digital Manufacturing
Gibson, I., Rosen, D. W., & Stucker, B. (2010) · National University of Singapore · doi:10.1007/978-1-4419-1120-9 · Cited by 2,969
Review of selective laser melting: Materials and applications
Yap, C. Y., Chua, C. K., Dong, Z. L., Liu, Z. H., Zhang, D. Q., Loh, L. E., & Sing, S. L. (2015) · Applied Physics Reviews · doi:10.1063/1.4935926 · Cited by 2,353
Polymer‐Derived Ceramics: 40 Years of Research and Innovation in Advanced Ceramics
Colombo, P., Mera, G., Riedel, R., & Sorarù, G. D. (2010) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2010.03876.x · Cited by 1,887
Ultralight Metallic Microlattices
Schaedler, T. A., Jacobsen, A. J., Torrents, A., Sorensen, A. E., Lian, J., Greer, J. R., Valdevit, L., & Carter, W. B. (2011) · Science · doi:10.1126/science.1211649 · Cited by 1,784
Direct Ink Writing of 3D Functional Materials
Lewis, J. A. (2006) · Advanced Functional Materials · doi:10.1002/adfm.200600434 · Cited by 1,740
Consolidation phenomena in laser and powder-bed based layered manufacturing
Kruth, J.-P., Levy, G., Klocke, F., & Childs, T. H. C. (2007) · CIRP Annals · doi:10.1016/j.cirp.2007.10.004 · Cited by 1,444
A review on 3D micro-additive manufacturing technologies
Vaezi, M., Seitz, H., & Yang, S. (2013) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-012-4605-2 · Cited by 1,293
Additive Manufacturing of Ceramics: Issues, Potentialities, and Opportunities
Zocca, A., Colombo, P., Gomes, C. M., & Günster, J. (2015) · Journal of the American Ceramic Society · doi:10.1111/jace.13700 · Cited by 1,115
Additive manufacturing of polymer-derived ceramics
Eckel, Z. C., Zhou, C., Martin, J. H., Jacobsen, A. J., Carter, W. B., & Schaedler, T. A. (2016) · Science · doi:10.1126/science.aad2688 · Cited by 1,106
Additive Manufacturing of Ceramic‐Based Materials
Travitzky, N., Bonet, A., Dermeik, B., Fey, T., Filbert‐Demut, I., Schlier, L., Schlordt, T., & Greil, P. (2014) · Advanced Engineering Materials · doi:10.1002/adem.201400097 · Cited by 878
Direct Ink Writing of Three‐Dimensional Ceramic Structures
Lewis, J. A., Smay, J. E., Stuecker, J., & Cesarano, J. (2006) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2006.01382.x · Cited by 823
Binder jetting: A review of process, materials, and methods
Ziaee, M., & Crane, N. B. (2019) · Additive Manufacturing · doi:10.1016/j.addma.2019.05.031 · Cited by 819
Influence of Fluid Physical Properties on Ink-Jet Printability
Jang, D., Kim, D., & Moon, J. (2009) · Langmuir · doi:10.1021/la900059m · Cited by 745
The Design of Scaffolds for Use in Tissue Engineering. Part II. Rapid Prototyping Techniques
Yang, S., Leong, K.-F., Du, Z., & Chua, C.-K. (2002) · Tissue Engineering · doi:10.1089/107632702753503009 · Cited by 729
On the Vickers Indentation Fracture Toughness Test
Quinn, G. D., & Bradt, R. C. (2007) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2006.01482.x · Cited by 709
Colloidal Inks for Directed Assembly of 3-D Periodic Structures
Smay, J. E., Cesarano, J., & Lewis, J. A. (2002) · Langmuir · doi:10.1021/la0257135 · Cited by 700
Richerson, D. W. (2005) · CRC Press eBooks · doi:10.1201/b18952 · Cited by 685
Vaezi, M., Chianrabutra, S., Mellor, B., & Yang, S. (2013) · Virtual and Physical Prototyping · doi:10.1080/17452759.2013.778175 · Cited by 548
Ceramic Stereolithography: Additive Manufacturing for Ceramics by Photopolymerization
Halloran, J. W. (2016) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070115-031841 · Cited by 544
Novel Powder‐Processing Methods for Advanced Ceramics
Sigmund, W. M., Bell, N. S., & Bergström, L. (2000) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.2000.tb01432.x · Cited by 477
Linking Rheology and Printability for Dense and Strong Ceramics by Direct Ink Writing
M’Barki, A., Bocquet, L., & Stevenson, A. (2017) · Scientific Reports · doi:10.1038/s41598-017-06115-0 · Cited by 471
Additive Manufacturing of Dense Alumina Ceramics
Schwentenwein, M., & Homa, J. (2015) · International Journal of Applied Ceramic Technology · doi:10.1111/ijac.12319 · Cited by 465
Butscher, A., Bohner, M., Hofmann, S., Gauckler, L., & Müller, R. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.09.039 · Cited by 459
Additive manufacturing of ceramics: A review
Deckers, J. P., Vleugels, J., & Kruth, J. (2014) · Lirias (KU Leuven) · doi:10.4416/jcst2014-00032 · Cited by 429
Klocke, F., Klink, A., Veselovac, D., Aspinwall, D. K., Soo, S. L., Schmidt, M., Schilp, J., Levy, G., & Kruth, J.-P. (2014) · CIRP Annals · doi:10.1016/j.cirp.2014.05.004 · Cited by 417
Tan, J. H., Wong, W. L. E., & Dalgarno, K. W. (2017) · Additive Manufacturing · doi:10.1016/j.addma.2017.10.011 · Cited by 407
Additive manufacturing of ZrO2‐Al2O3 ceramic components by selective laser melting
Wilkes, J., Hagedorn, Y., Meiners, W., & Wissenbach, K. (2013) · Rapid Prototyping Journal · doi:10.1108/13552541311292736 · Cited by 398
Robocasting of structural ceramic parts with hydrogel inks
Feilden, E., Blanca, E. G.-T., Giuliani, F., Saiz, E., & Vandeperre, L. (2016) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2016.03.001 · Cited by 378
Fu, Q., Saiz, E., & Tomsia, A. P. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2011.06.030 · Cited by 366
Direct selective laser sintering and melting of ceramics: a review
Sing, S. L., Yeong, W. Y., Wiria, F. E., Tay, B. Y., Zhao, Z., Zhao, L., Tian, Z., & Yang, S. (2017) · Rapid Prototyping Journal · doi:10.1108/rpj-11-2015-0178 · Cited by 359
He, R., Liu, W., Wu, Z., An, D., Huang, M., Wu, H., Jiang, Q., Ji, X., Wu, S., & Xie, Z. (2018) · Ceramics International · doi:10.1016/j.ceramint.2017.11.135 · Cited by 357
Modern Ceramic Engineering: Properties, Processing, and Use in Design, Fourth Edition
Richerson, D. W. (2018) · Medical Entomology and Zoology · Cited by 353
Ceramic suspensions suitable for stereolithography
Hinczewski, C., Corbel, S., & Chartier, T. (1998) · Journal of the European Ceramic Society · doi:10.1016/s0955-2219(97)00186-6 · Cited by 351
Ceramic components manufacturing by selective laser sintering
Bertrand, P., Bayle, F., Combe, C., Goeuriot, P., & Smurov, I. (2007) · Applied Surface Science · doi:10.1016/j.apsusc.2007.08.085 · Cited by 351
Ink-jet delivery of particle suspensions by piezoelectric droplet ejectors
Reis, N., Ainsley, C., & Derby, B. (2005) · Journal of Applied Physics · doi:10.1063/1.1888026 · Cited by 335
Sintering and robocasting of β-tricalcium phosphate scaffolds for orthopaedic applications
Miranda, P., Saiz, E., Gryn, K., & Tomsia, A. P. (2006) · Acta Biomaterialia · doi:10.1016/j.actbio.2006.02.004 · Cited by 304
Ink Jet Deposition of Ceramic Suspensions: Modeling and Experiments of Droplet Formation
Reis, N., & Derby, B. (2000) · MRS Proceedings · doi:10.1557/proc-625-117 · Cited by 289
Net shaped high performance oxide ceramic parts by selective laser melting
Yves-Christian, H., Jan, W., Wilhelm, M., Konrad, W., & Reinhart, P. (2010) · Physics Procedia · doi:10.1016/j.phpro.2010.08.086 · Cited by 276
Stereolithography of structural complex ceramic parts
Chartier, T., Chaput, C., Doreau, F., & Loiseau, M. (2002) · Journal of Materials Science · doi:10.1023/a:1016102210277 · Cited by 274
Gonzalez, J. A., Mireles, J., Lin, Y., & Wicker, R. B. (2016) · Ceramics International · doi:10.1016/j.ceramint.2016.03.079 · Cited by 265
Additive Manufacturing of Dense Ceramic Parts via Direct Ink Writing of Aqueous Alumina Suspensions
Rueschhoff, L., Costakis, W., Michie, M., Youngblood, J., & Trice, R. (2016) · International Journal of Applied Ceramic Technology · doi:10.1111/ijac.12557 · Cited by 251
Additive Manufacture of Ceramics Components by Inkjet Printing
Derby, B. (2015) · Engineering · doi:10.15302/j-eng-2015014 · Cited by 239
Ink‐Jet Printing of Wax‐Based Alumina Suspensions
Seerden, K. A. M., Reis, N., Evans, J. R. G., Grant, P. S., Halloran, J. W., & Derby, B. (2001) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.2001.tb01045.x · Cited by 237
Dehurtevent, M., Robberecht, L., Hornez, J.-C., Thuault, A., Deveaux, E., & Béhin, P. (2017) · Dental Materials · doi:10.1016/j.dental.2017.01.018 · Cited by 228
Three-Dimensional Printing Techniques
Demirak, O., Gokyer, S., Ergene, E., & Yilgor, P. (2025) · Biological and Medical Physics, Biomedical Engineering · doi:10.1007/978-3-031-90966-5_3 · Cited by 225
Butscher, A., Bohner, M., Roth, C., Ernstberger, A., Heuberger, R., Doebelin, N., Rudolf von Rohr, P., & Müller, R. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2011.08.027 · Cited by 224
Liu, X., Rahaman, M. N., Hilmas, G. E., & Bal, B. S. (2013) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.02.026 · Cited by 223
Fabrication of barium titanate by binder jetting additive manufacturing technology
Gaytan, S. M., Cadena, M. A., Karim, H., Delfin, D., Lin, Y., Espalin, D., MacDonald, E., & Wicker, R. B. (2015) · Ceramics International · doi:10.1016/j.ceramint.2015.01.108 · Cited by 221
Zhou, M., Liu, W., Wu, H., Song, X., Chen, Y., Cheng, L., He, F., Chen, S., & Wu, S. (2016) · Ceramics International · doi:10.1016/j.ceramint.2016.04.050 · Cited by 221
Processing of Bulk Alumina Ceramics Using Laser Engineered Net Shaping
Balla, V. K., Bose, S., & Bandyopadhyay, A. (2008) · International Journal of Applied Ceramic Technology · doi:10.1111/j.1744-7402.2008.02202.x · Cited by 217
Direct write assembly of calcium phosphate scaffolds using a water-based hydrogel
Franco, J., Hunger, P., Launey, M. E., Tomsia, A. P., & Saiz, E. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.06.031 · Cited by 217
Pham, T. A., Kim, D. ‐., Lim, T. ‐., Park, S. ‐., Yang, D., & Lee, K. ‐. (2006) · Advanced Functional Materials · doi:10.1002/adfm.200600009 · Cited by 214
Figueiredo, A., Vieira, N. C. S., Santos, J. F. D., Janegitz, B. C., Aoki, S. M., Junior, P. P., Lovato, R. L., Nogueira, M. L., Zucolotto, V., & Guimarães, F. E. G. (2017) · Scientific Reports · doi:10.1038/srep46865 · Cited by 209
Photopolymerization of powder suspensions for shaping ceramics
Halloran, J. W., Tomeckova, V., Gentry, S., Das, S., Cilino, P., Yuan, D., Guo, R., Rudraraju, A., Shao, P., Wu, T., et al. (2011) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2010.12.003 · Cited by 205
de Hazan, Y., & Penner, D. (2017) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2017.03.021 · Cited by 200
Xing, H., Zou, B., Li, S., & Fu, X. (2017) · Ceramics International · doi:10.1016/j.ceramint.2017.09.007 · Cited by 198
He, R., Ding, G., Zhang, K., Li, Y., & Fang, D. (2019) · Ceramics International · doi:10.1016/j.ceramint.2019.04.100 · Cited by 195
Stereolithography‐based additive manufacturing of gray‐colored SiC ceramic green body
Ding, G., He, R., Zhang, K., Xie, C., Wang, M., Yang, Y., & Fang, D. (2019) · Journal of the American Ceramic Society · doi:10.1111/jace.16648 · Cited by 195
Costakis, W. J., Rueschhoff, L. M., Diaz-Cano, A. I., Youngblood, J. P., & Trice, R. W. (2016) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2016.06.002 · Cited by 187
Alumina–zirconium ceramics synthesis by selective laser sintering/melting
Shishkovsky, I., Yadroitsev, I., Bertrand, P., & Smurov, I. (2007) · Applied Surface Science · doi:10.1016/j.apsusc.2007.09.001 · Cited by 186
3D printing of open-porous cellular ceramics with high specific strength
Maurath, J., & Willenbacher, N. (2017) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2017.06.001 · Cited by 182
Standard Terminology for Additive Manufacturing - General Principles - Terminology
F42 Committee (2016) · doi:10.1520/f3177-15 · Cited by 180
Thermoplastic 3D Printing—An Additive Manufacturing Method for Producing Dense Ceramics
Scheithauer, U., Schwarzer, E., Richter, H., & Moritz, T. (2014) · International Journal of Applied Ceramic Technology · doi:10.1111/ijac.12306 · Cited by 177
Zirconia/alumina functionally graded material made by ceramic ink jet printing
Mott, M., & Evans, J. (1999) · Materials Science and Engineering A · doi:10.1016/s0921-5093(99)00266-x · Cited by 172
The influences of the material properties on ceramic micro-stereolithography
Sun, C., & Zhang, X. (2002) · Sensors and Actuators A Physical · doi:10.1016/s0924-4247(02)00264-9 · Cited by 171
Digital light processing of ceramic components from polysiloxanes
Schmidt, J., & Colombo, P. (2018) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2017.07.033 · Cited by 170
The effect of surface roughness on ceramics used in dentistry: A review of literature
Rashid, H. (2014) · European Journal of Dentistry · doi:10.4103/1305-7456.143646 · Cited by 169
Badev, A., Abouliatim, Y., Chartier, T., Lecamp, L., Lebaudy, P., Chaput, C., & Delage, C. (2011) · Journal of Photochemistry and Photobiology A: Chemistry · doi:10.1016/j.jphotochem.2011.05.010 · Cited by 169
Preparation of porous hydroxyapatite scaffolds
Saiz, E., Grémillard, L., Menendez, G., Miranda, P., Gryń, K., & Tomsia, A. P. (2006) · Materials Science and Engineering C · doi:10.1016/j.msec.2006.05.038 · Cited by 169
Pore size and pore volume effects on alumina and TCP ceramic scaffolds
Bose, S., Darsell, J. T., Kintner, M., Hosick, H. L., & Bandyopadhyay, A. K. (2002) · Materials Science and Engineering C · doi:10.1016/s0928-4931(02)00129-7 · Cited by 163
Asadi-Eydivand, M., Solati-Hashjin, M., Farzad, A., & Abu Osman, N. A. (2016) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2015.06.005 · Cited by 161
3D printing of SiC ceramic: Direct ink writing with a solution of preceramic polymers
Chen, H., Wang, X., Xue, F., Huang, Y., Zhou, K., & Zhang, D. (2018) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2018.08.009 · Cited by 159
Qian, B., & Shen, Z. J. (2013) · Journal of Asian Ceramic Societies · doi:10.1016/j.jascer.2013.08.004 · Cited by 156
Ghazanfari, A., Li, W., Leu, M. C., & Hilmas, G. E. (2017) · Additive manufacturing · doi:10.1016/j.addma.2017.04.001 · Cited by 154
Ceramic fabrication using Mask-Image-Projection-based Stereolithography integrated with tape-casting
Song, X., Chen, Y., Lee, T., Wu, S., & Cheng, L. (2015) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2015.06.022 · Cited by 153
Tang, H., Chiu, M.-L., & Yen, H.-C. (2011) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2011.02.020 · Cited by 153
3D gel-printing—An additive manufacturing method for producing complex shape parts
Ren, X., Shao, H., Lin, T., & Zheng, H. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.03.152 · Cited by 149
Fractography of zirconia-specimens made using additive manufacturing (LCM) technology
Harrer, W., Schwentenwein, M., Lube, T., & Dänzer, R. (2017) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2017.03.018 · Cited by 148
Huang, R., Jiang, Q., Wu, H., Li, Y., Liu, W., Lu, X., & Wu, S. (2018) · Ceramics International · doi:10.1016/j.ceramint.2018.11.116 · Cited by 144
Farzadi, A., Waran, V., Solati‐Hashjin, M., et al. (2015) · Ceramics International · doi:10.1016/j.ceramint.2015.03.004 · Cited by 128
3D gel-printing of zirconia ceramic parts
Shao, H., Zhao, D., Lin, T., He, J., & Wu, J. W. (2017) · Ceramics International · doi:10.1016/j.ceramint.2017.07.124 · Cited by 128
Houmard, M., Fu, Q., Genet, M., Saiz, E., & Tomsia, A. P. (2013) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.32935 · Cited by 120
Shaping of ceramic parts by selective laser melting of powder bed
Juste, E., Petit, F., Lardot, V., & Cambier, F. (2014) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.2014.127 · Cited by 120
Direct inkjet printing of Si3N4: Characterization of ink, green bodies and microstructure
Cappi, B., Özkol, E., Ebert, J., & Telle, R. (2008) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2008.03.004 · Cited by 112
Direct laser sintering of a silica sand
Tang, Y. C., Fuh, J. Y. H., Loh, H. T., Wong, Y. S., & Lü, L. (2003) · Materials & Design (1980-2015) · doi:10.1016/s0261-3069(03)00126-2 · Cited by 112
Additive manufacturing and mechanical characterization of high density fully stabilized zirconia
Ghazanfari, A., Li, W., Leu, M. C., Watts, J., & Hilmas, G. E. (2017) · Ceramics International · doi:10.1016/j.ceramint.2017.01.154 · Cited by 108
Fundamentals of Stereolithography
Jacobs, P. F. (2018) · Texas ScholarWorks (Texas Digital Library) · doi:10.15781/t24m91t5h · Cited by 107
Control of the viscous behavior of highly concentrated mullite suspensions for robocasting
Stuecker, J. N., Cesarano, J., & Hirschfeld, D. A. (2003) · Journal of Materials Processing Technology · doi:10.1016/s0924-0136(03)00586-7 · Cited by 106
Slurry‐Based Additive Manufacturing of Ceramics
Mühler, T., Gomes, C. M., Heinrich, J. G., & Günster, J. (2013) · International Journal of Applied Ceramic Technology · doi:10.1111/ijac.12113 · Cited by 104
Biological evaluation of an apatite–mullite glass-ceramic produced via selective laser sintering
Goodridge, R., Wood, D. J., Ohtsuki, C., & Dalgarno, K. W. (2007) · Acta Biomaterialia · doi:10.1016/j.actbio.2006.10.005 · Cited by 102
Self-citationAzuaje, J., Tubio, C. R., Escalante, L., Gómez, M., Guitián, F., Coelho, A., Caamaño, O., Gil, Á., & Sotelo, E. (2016) · Applied Catalysis A General · doi:10.1016/j.apcata.2016.11.031 · Cited by 101
Scheithauer, U., Weingarten, S., Johne, R., Schwarzer, E., Abel, J., Richter, H., Moritz, T., & Michaelis, A. (2017) · Materials · doi:10.3390/ma10121368 · Cited by 101
Marques, C. F., Perera, F. H., Marote, A., Ferreira, S., Vieira, S. I., Olhero, S. M., Miranda, P., & Ferreira, J. M. F. (2016) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2016.08.018 · Cited by 99
A new method of fabricating robust freeform 3D ceramic scaffolds for bone tissue regeneration
Seol, Y., Park, D. Y., Park, J. Y., Kim, S. W., Park, S. J., & Cho, D. (2012) · Biotechnology and Bioengineering · doi:10.1002/bit.24794 · Cited by 96
Three‐Dimensional Printing of Complex‐Shaped Alumina/Glass Composites
Zhang, W., Melcher, R., Travitzky, N. A., Bordia, R. K., & Greil, P. (2009) · Advanced Engineering Materials · doi:10.1002/adem.200900213 · Cited by 92
New gel-casting process for alumina ceramics based on gelation of alginate
Yu, J., Kanno, Y., & Xie, Z. (2002) · Journal of the European Ceramic Society · doi:10.1016/s0955-2219(01)00513-1 · Cited by 87
Freeze-form extrusion fabrication of ceramic parts
Huang, T., Mason, M. S., Hilmas, G. E., et al. (2006) · Virtual and Physical Prototyping · doi:10.1080/17452750600649609 · Cited by 85
Photopolymerization monitoring of ceramic stereolithography resins by FTIR methods
Wu, K. C., & Halloran, J. W. (2005) · Journal of Materials Science · doi:10.1007/s10853-005-5689-y · Cited by 82
A novel aqueous ceramic suspension for ceramic stereolithography
Zhou, W., Li, D., & Wang, H. (2010) · Rapid Prototyping Journal · doi:10.1108/13552541011011686 · Cited by 80
Shao, H., Liu, A., Ke, X., et al. (2017) · Journal of Materials Chemistry B · doi:10.1039/c7tb00217c · Cited by 80
Characterization of zirconia specimens fabricated by ceramic on-demand extrusion
Li, W., Ghazanfari, A., McMillen, D., Leu, M. C., Hilmas, G. E., & Watts, J. (2018) · Ceramics International · doi:10.1016/j.ceramint.2018.04.008 · Cited by 78
Additive manufacturing of ceramics and ceramic composites via robocasting
Feilden, E. (2017) · Spiral (Imperial College London) · doi:10.25560/55940 · Cited by 74
Xiong, H., Chen, H., Zhao, L., Huang, Y., Zhou, K., & Zhang, D. (2019) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2019.02.045 · Cited by 73
Detsch, R., Uhl, F. E., Deisinger, U., & Ziegler, G. (2007) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-007-3297-x · Cited by 71
Directed Colloidal Assembly of Linear and Annular Lead Zirconate Titanate Arrays
Smay, J. E., Cesarano, J., Tuttle, B. A., & Lewis, J. A. (2004) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2004.00293.x · Cited by 70
Geometric characterization of additively manufactured polymer derived ceramics
Hundley, J. M., Eckel, Z. C., Schueller, E. C., Cante, K., Biesboer, S. M., Yahata, B. D., & Schaedler, T. A. (2017) · Additive manufacturing · doi:10.1016/j.addma.2017.08.009 · Cited by 70
Özkol, E., Ebert, J., Uibel, K., Wätjen, A. M., & Telle, R. (2008) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2008.06.020 · Cited by 66
Biocompatibility of ceramic scaffolds for bone replacement made by 3D printing
Leukers, B., Gülkan, H., Irsen, S. H., Milz, S., Tille, C., Seitz, H., & Schieker, M. (2005) · Materialwissenschaft und Werkstofftechnik · doi:10.1002/mawe.200500968 · Cited by 64
Solid freeform fabrication of ceramics
Cawley, J. D. (1999) · Current Opinion in Solid State and Materials Science · doi:10.1016/s1359-0286(99)00055-8 · Cited by 61
Deuser, B. K., Tang, L., Landers, R. G., Leu, M. C., & Hilmas, G. E. (2013) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4024534 · Cited by 47
Synthesis of bioceramic scaffolds for bone tissue engineering by rapid prototyping technique
Liu, F.-H. (2012) · Journal of Sol-Gel Science and Technology · doi:10.1007/s10971-012-2905-5 · Cited by 44
Laminated object manufacturing of LZSA glass‐ceramics
Gomes, C. M., Travitzky, N. A., Greil, P., Acchar, W., Birol, H., de Oliveira, A. P. N., & Hotza, D. (2011) · Rapid Prototyping Journal · doi:10.1108/13552541111184152 · Cited by 43
Petit, C., Meille, S., Maire, É., et al. (2016) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2016.11.035 · Cited by 42
SLM of Net-Shaped High Strength Ceramics: New Opportunities for Producing Dental Restorations
Hagedorn, Y., Balachandran, N., Meiners, W., Wissenbach, K., & Poprawe, R. (2011) · Publikationsdatenbank der Fraunhofer-Gesellschaft (Fraunhofer-Gesellschaft) · doi:10.26153/tsw/15315 · Cited by 36
Carrijo, M. M. M., Lorenz, H., Filbert‐Demut, I., Barra, G. M. D. O., Hotza, D., Yin, X., Greil, P., & Travitzky, N. A. (2016) · Ceramics International · doi:10.1016/j.ceramint.2016.03.036 · Cited by 33
Recent Developments in Robocasting of Ceramics and Multimaterial Deposition
Cesarano, J., King, B. H., & Denham, H. B. (1998) · doi:10.26153/tsw/666 · Cited by 31
Olhero, S. M., Fernandes, H. R., Marques, C. F., Silva, B. C. G., & Ferreira, J. M. F. (2017) · Journal of Materials Science · doi:10.1007/s10853-017-1347-4 · Cited by 30
Extrusion based additive manufacturing using Explicit Model Predictive Control
Zomorodi, H., & Landers, R. G. (2016) · Proceedings of the ... American Control Conference/Proceedings of the American Control Conference · doi:10.1109/acc.2016.7525169 · Cited by 28
Drouet, C., Leriche, A., Hampshire, S., Kashani, M., Stamboulis, A. G., Iafisco, M., & Tampieri, A. (2017) · Elsevier eBooks · doi:10.1016/b978-0-08-100881-2.00002-6 · Cited by 26
Net shape fabrication of calcium phosphate scaffolds with multiple material domains
Xie, Y., Rustom, L. E., McDermott, A. M., Boerckel, J. D., Johnson, A. J. W., Alleyne, A. G., & Hoelzle, D. J. (2016) · Biofabrication · doi:10.1088/1758-5090/8/1/015005 · Cited by 24
Preparation of SiC Ceramics by Laminated Object Manufacturing and Pressureless Sintering
Zhong, H., Yao, X. M., Zhu, Y. Z., Jx, Z., Jiang, D. L., Chen, J., Chen, Z. M., Xj, L., & Huang, Z. R. (2015) · Cited by 24
Additive manufacturing of metal-ceramic-composites by thermoplastic 3D-printing (3DTP)
Scheithauer, U., Slawik, T., Schwarzer, E., Richter, H.-J., Moritz, T., & Michaelis, A. (2015) · Fraunhofer-Publica (Fraunhofer-Gesellschaft) · doi:10.4416/jcst2014-00045 · Cited by 23
Functionally Graded Ceramic Structures by Direct Thermal Inkjet Printing
Mauerstraße, & Aachen (2014) · Journal of ceramic science and technology · Cited by 22
Support free infiltration of selective laser sintered (SLS) silicon carbide preforms
Stevinson, B. (2016) · Texas ScholarWorks (Texas Digital Library) · doi:10.15781/t2k748 · Cited by 12
Aqueous-Based Extrusion Fabrication of Ceramics on Demand
Mason, M. S., Huang, T., Landers, R. G., Leu, M. C., Hilmas, G. E., & Hayes, M. W. (2007) · Defense Technical Information Center (DTIC) · doi:10.26153/tsw/7199 · Cited by 11
Novel indirect additive manufacturing for processing biomaterials
Khan, M., & Fenner, S. (2015) · Cited by 1
Cited by
Direct Ink Writing: A 3D Printing Technology for Diverse Materials
Saadi, M. A. S. R., Maguire, A., Pottackal, N. T., Thakur, M. S. H., Ikram, M. M., Hart, A. J., Ajayan, P. M., & Rahman, M. M. (2022) · Advanced Materials · doi:10.1002/adma.202108855 · Cited by 1,335
Shahzad, A., & Lazoglu, I. (2021) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2021.109249 · Cited by 372
Alami, A. H., Ghani Olabi, A., Alashkar, A., Alasad, S., Aljaghoub, H., Rezk, H., & Abdelkareem, M. A. (2023) · Ain Shams Engineering Journal · doi:10.1016/j.asej.2023.102516 · Cited by 349
Kanishka, K., & Acherjee, B. (2023) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2023.10.024 · Cited by 343
Photopolymerization-based additive manufacturing of ceramics: A systematic review
Rasaki, S. A., Xiong, D., Xiong, S., Su, F., Idrees, M., & Chen, Z. (2021) · Journal of Advanced Ceramics · doi:10.1007/s40145-021-0468-z · Cited by 297
Metadata
- Authors
- Lakhdar, Y., Tuck, C., Binner, J., Terry, A., & Goodridge, R.
- Venue
- Progress in Materials Science
- Publisher
- Elsevier BV
- Published
- 2021-02
- Volume
- 116
- Pages
- 100736
- ISSN
- 0079-6425 (ISSN-L)
- OpenAlex
- W3090120030
- Cited by
- 857
- References
- 129
- FWCI
- 29.64
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.