The DOI matches its Crossref record; 10 of the 10 references it cites were found in a registry or an index.
On the Vickers Indentation Fracture Toughness Test
Abstract
The Vickers indentation fracture toughness test, or VIF, is addressed by considering its origins and the numerous equations that have been applied along with the technique to estimate the fracture resistance, or the K I c of ceramics. Initiation and propagation of cracks during the VIF test are described and contrasted with the pre‐cracking and crack growth for internationally standardized fracture toughness tests. It is concluded that the VIF test technique is fundamentally different than standard fracture toughness tests. The VIF test has a complex three‐dimensional crack system with substantial deformation residual stresses and damage around the cracks. The VIF test relates to an ill‐defined crack arrest condition as opposed to the rapid crack propagation of the standardized fracture toughness tests. Previously published fracture toughness results employing the VIF technique are reviewed. These reveal serious discrepancies in reported VIF fracture toughness values. Finally, recent fracture resistance measurements by the VIF technique for the Standard Reference Material SRM 2100 are presented. These are compared with standardized test results for the same material. It is concluded that the VIF technique is not reliable as a fracture toughness test for ceramics or for other brittle materials. What the VIF actually measures in terms of fracture resistance cannot be readily defined. It is recommended that the VIF technique no longer be acceptable for the fracture toughness testing of ceramic materials.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Anstis, G. R., Chantikul, P., Lawn, B. R., & Marshall, D. B. (1981) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1981.tb10320.x · Cited by 5,653
Fracture Toughness Determinations by Indentation
Evans, A. G., & Charles, E. A. (1976) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1976.tb10991.x · Cited by 2,356
Elastic/Plastic Indentation Damage in Ceramics: The Median/Radial Crack System
LAWN, B. R., EVANS, A. G., & MARSHALL, D. B. (1980) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1980.tb10768.x · Cited by 2,108
Direct Observation and Analysis of Indentation Cracking in Glasses and Ceramics
Cook, R. F., & Pharr, G. M. (1990) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1990.tb05119.x · Cited by 1,071
Quasi-static solid particle damage in brittle solids—I. Observations analysis and implications
Evans, A. G., & Wilshaw, T. R. (1976) · Acta Metallurgica · doi:10.1016/0001-6160(76)90042-0 · Cited by 855
Hardness, Toughness, and Brittleness: An Indentation Analysis
Lawn, B. R., & Marshall, D. B. (1979) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1979.tb19075.x · Cited by 807
Microfracture beneath point indentations in brittle solids
Lawn, B. R., & Swain, M. V. (1975) · Journal of Materials Science · doi:10.1007/bf00541038 · Cited by 717
Fracture toughness testing of brittle materials
Sakai, M., & Bradt, R. C. (1993) · International Materials Reviews · doi:10.1179/095066093790101734 · Cited by 233
Self-citationIndentation Fracture Toughness of Sintered Silicon Carbide in the Palmqvist Crack Regime
Li, Z., Ghosh, A. K., KOBAYASHI, A. S., et al. (1989) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1989.tb06242.x · Cited by 219
Jungk, J. M., Boyce, B. L., Buchheit, T., Friedmann, T. A., Yang, D., & Gerberich, W. W. (2006) · Acta Materialia · doi:10.1016/j.actamat.2006.05.003 · Cited by 89
Cited by
BaTiO3-Based Piezoelectrics: Fundamentals, Current Status, and Perspectives
Acosta, M., Novak, N., Rojas, V., Patel, S., Vaish, R., Koruza, J., Rossetti, G. A., & Rödel, J. (2017) · Applied Physics Reviews · doi:10.1063/1.4990046 · Cited by 1,451
Review of graphene–ceramic matrix composites
Porwal, H., Grasso, S., & Reece, M. J. (2013) · Advances in Applied Ceramics · doi:10.1179/174367613x13764308970581 · Cited by 314
Microscopic assessment of bone toughness using scratch tests
Kataruka, A., Mendu, K., Okeoghene, O., Puthuvelil, J., & Akono, A.-T. (2017) · Bone Reports · doi:10.1016/j.bonr.2016.12.001 · Cited by 28
Kruzic, J. J., & Ritchie, R. O. (2008) · Journal of Biomechanics · doi:10.1016/j.jbiomech.2008.01.022 · Cited by 20
Metadata
- Authors
- Quinn, G. D., & Bradt, R. C.
- Venue
- Journal of the American Ceramic Society
- Publisher
- Wiley
- Published
- 2007-02-09
- Volume
- 90
- Issue
- 3
- Pages
- 673-680
- ISSN
- 0002-7820 (ISSN-L)
- 1551-2916
- OpenAlex
- W2025909170
- Cited by
- 709
- References
- 10
- FWCI
- 48.71
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: On the Vickers Indentation Fracture Toughness Test. https://app.cochat.ai/papers/10.1111/j.1551-2916.2006.01482.x
- The paper
- Quinn, G. D., & Bradt, R. C. (2007). On the Vickers Indentation Fracture Toughness Test. Journal of the American Ceramic Society. https://doi.org/10.1111/j.1551-2916.2006.01482.x
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.