Investigation of factors influencing the hydrolytic degradation of single PLGA microparticles
Open accessThe DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Abstract
Poly lactide-co-glycolide (PLGA) is an important polymer matrix used to provide sustained release across a range of active pharmaceutical ingredients (APIs) and works by hydrolytic degradation within the body, thereby releasing entrapped drug. Processing and sterilisation can impact on the morphology and chemistry of PLGA therefore influencing the hydrolysis rate and in turn the release rate of any entrapped API. This paper has looked at the effect of supercritical carbon dioxide (scCO2) processing, gamma irradiation, comonomer ratio and temperature on the hydrolysis of individual PLGA microparticles, using a combination of Attenuated Total Reflectance-Fourier Transform Infrared (ATR-FTIR) imaging, Scanning Electron Microscopy (SEM), Differential Scanning Calorimetery (DSC) and Gel Permeation chromatography (GPC) to facilitate a better understanding of the physiochemical factors affecting the hydrolysis rate. This work has shown that scCO2 processing influences hydrolysis rates by increasing the porosity of the PLGA microparticles, increasing the lactide comonomer ratio decreases hydrolysis rates by reducing the hydrophilicity of the PLGA microparticles and increasing the gamma irradiation dose systematically increases the rate of hydrolysis due to reducing the overall molecular weight of the polymer matrix via a chain scission mechanism. Moreover this work shows that ATR-FTIR imaging facilitates the determination of a range of physicochemical parameters during the hydrolysis of a single PLGA microparticle including water ingress, water/polymer interface dimensions, degradation product distribution and hydrolysis rates for both lactide and glycolide copolymer units from the same experiment.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Polymeric systems for controlled drug release
Uhrich, K. E., Cannizzaro, S. M., Langer, R. S., & Shakesheff, K. M. (1999) · Chemical Reviews · doi:10.1021/cr940351u · Cited by 2,633 · cited 1×
“…of microparticles, which release protein upon degradation of the carrier matrix, are being developed at a rapid rate as they change the period between injections from a few days to several weeks, enhance the protein therapeutic effect, and therefore noticeably increase patient compliance [2 e 4].”
Polymers for Drug Delivery Systems
Liechty, W. B., Kryscio, D. R., Slaughter, B. V., & Peppas, N. A. (2010) · Annual Review of Chemical and Biomolecular Engineering · doi:10.1146/annurev-chembioeng-073009-100847 · Cited by 1,608
Mundargi, R. C., Babu, V. R., Rangaswamy, V., Patel, P., & Aminabhavi, T. M. (2008) · Journal of Controlled Release · doi:10.1016/j.jconrel.2007.09.013 · Cited by 1,025
Chemical degradation of peptides and proteins in PLGA: A review of reactions and mechanisms
Houchin, M. L., & Topp, E. M. (2008) · Journal of Pharmaceutical Sciences · doi:10.1002/jps.21176 · Cited by 277
Elevated temperature degradation of a 50:50 copolymer of PLA-PGA
Agrawal, C. M., Huang, D., Schmitz, J. P., & Athanasiou, K. A. (1997) · Tissue Engineering · doi:10.1089/ten.1997.3.345 · Cited by 120 · cited 2×
“Factors effecting the hydrolytic degradation of PLGA devices in the form of microspheres [18,19], porous scaffolds [20], dense films [21] and cylinders [22,23] have been widely studied.”
Cited by
Elmowafy, E. M., Tiboni, M., & Soliman, M. E. (2019) · Journal of Pharmaceutical Investigation · doi:10.1007/s40005-019-00439-x · Cited by 621
PLGA-based nanomedicines manufacturing: Technologies overview and challenges in industrial scale-up
Operti, M. C., Bernhardt, A., Grimm, S., Engel, A., Figdor, C. G., & Tagit, O. (2021) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2021.120807 · Cited by 302
Recent advances in PLGA-based biomaterials for bone tissue regeneration
Jin, S., Xia, X., Huang, J., Yuan, C., Zuo, Y., Li, Y., & Li, J. (2021) · Acta Biomaterialia · doi:10.1016/j.actbio.2021.03.067 · Cited by 295
Recent advances in the formulation of PLGA microparticles for controlled drug delivery
Lagreca, E., Onesto, V., Di Natale, C., La Manna, S., Netti, P. A., & Vecchione, R. (2020) · Progress in Biomaterials · doi:10.1007/s40204-020-00139-y · Cited by 284
Molecular insight into drug-loading capacity of PEG–PLGA nanoparticles for itraconazole
Wilkosz, N., Łazarski, G., Kovacik, L., Gargas, P., Nowakowska, M., Jamróz, D., & Kepczynski, M. (2018) · The Journal of Physical Chemistry B · doi:10.1021/acs.jpcb.8b03742 · Cited by 79
Metadata
- Authors
- Keles, H., Naylor, A., Clegg, F., & Sammon, C.
- Venue
- Polymer Degradation and Stability
- Publisher
- Elsevier BV
- Published
- 2015-09
- Volume
- 119
- Pages
- 228-241
- ISSN
- 0141-3910 (ISSN-L)
- OpenAlex
- W1883676910
- Cited by
- 145
- References
- 5
- FWCI
- 2.48
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Investigation of factors influencing the hydrolytic degradation of single PLGA microparticles. https://app.cochat.ai/papers/10.1016/j.polymdegradstab.2015.04.025
- The paper
- Keles, H., Naylor, A., Clegg, F., & Sammon, C. (2015). Investigation of factors influencing the hydrolytic degradation of single PLGA microparticles. Polymer Degradation and Stability. https://doi.org/10.1016/j.polymdegradstab.2015.04.025
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.