The DOI matches its Crossref record.
Preparation of interconnected poly(ε-caprolactone) porous scaffolds by a combination of polymer and salt particulate leaching
Abstract
This paper examines a new technique for the preparation of porous scaffolds by combining selective polymer leaching in a co-continuous blend and salt particulate leaching. In the first step of this technique, a co-continuous blend of two biodegradable polymers, poly(e-caprolactone) (PCL) and polyethylene oxide (PEO), and a certain amount of sodium chloride salt particles are melt blended using a twin screw extruder. Subsequently, extraction of the continuous PEO and mineral salts using water as a selective solvent yields a highly porous PCL scaffold with fully interconnected pores. Since, the salt particles and the co-continuous polymer blend morphology lead to very different pore sizes, a particular feature of this technique is the creation of a bimodal pore size distribution. Scanning electron microscopy, mercury intrusion porosimetry and laser diffraction particle size analysis were carried out to characterize the pore morphology. The prepared scaffolds have relatively homogeneous pore structure throughout the matrix and the porosity can be controlled between 75% and about 88% by altering the initial volume fraction of salt particles and to a lesser extent by changing the PCL/PEO composition ratio. Compared to the conventional salt leaching technique and to its different variants, the proposed process allows a better interconnection between the large pores left by the salt leaching and a fully interconnected porous structure resulting from the selective polymer leaching. The average compressive modulus of the different porous scaffolds was found to decrease from 5.2 MPa to about 1 MPa with increasing porosity, according to a power–law relationship. Since, the blending and molding of the scaffold (prior to leaching) can be made using conventional polymer processing equipment, this process seems very promising for a large scale production of porous scaffold of many sizes and in an economic way.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
A review on biodegradable polymeric materials for bone tissue engineering applications
Sabir, M. I., Xu, X., & Li, L. (2009) · Journal of Materials Science · doi:10.1007/s10853-009-3770-7 · Cited by 645
Review: Development of clinically relevant scaffolds for vascularised bone tissue engineering
Liu, Y., Lim, J., & Teoh, S.-H. (2013) · Biotechnology Advances · doi:10.1016/j.biotechadv.2012.10.003 · Cited by 427
Review of Hybrid Materials Based on Polyhydroxyalkanoates for Tissue Engineering Applications
Pryadko, A., Surmeneva, M. A., & Surmenev, R. A. (2021) · Polymers · doi:10.3390/polym13111738 · Cited by 102
Esmail, A., Pereira, J. R., Sevrin, C., Grandfils, C., Menda, U. D., Fortunato, E., Oliva, A., & Freitas, F. (2021) · Life · doi:10.3390/life11090935 · Cited by 15
Metadata
- Authors
- Reignier, J., & Huneault, M. A.
- Venue
- Polymer
- Publisher
- Elsevier BV
- Published
- 2006-06
- Volume
- 47
- Issue
- 13
- Pages
- 4703-4717
- ISSN
- 0032-3861 (ISSN-L)
- OpenAlex
- W1970436035
- Cited by
- 245
- References
- 0
- FWCI
- 8.29
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.