The DOI matches its Crossref record; 72 of the 72 references it cites were found in a registry or an index.
Toughening by nanostructure
Open accessAbstract
Block copolymer modified epoxy resins have generated significant interest since it was demonstrated that the combination could lead to nanostructured thermosets through self-assembly. Over moderate to high polymer concentration the system behaves as expected for a block copolymer in a solvent selective for one block. Two types of copolymers have been studied: non-reactive and reactive modifiers. Morphologies such as copolymer vesicle and spherical/wormlike micelles can be formed under the appropriate conditions. The enhancement of the modified thermosets' mechanical properties depends on the morphology adopted by the polymers. Besides improving mechanical properties, the morphology was found to also have an effect on the glass transition in the studied systems. In this review we collect the available data on the block copolymers used to fabricate nanostructured epoxy resins and critically appraise the properties reported.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Polymer/layered silicate nanocomposites: a review from preparation to processing
Sinha Ray, S., & Okamoto, M. (2003) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2003.08.002 · Cited by 6,816
Exceptionally high Young's modulus observed for individual carbon nanotubes
Treacy, M. M. J., Ebbesen, T. W., & Gibson, J. M. (1996) · Nature · doi:10.1038/381678a0 · Cited by 5,428
Strength and Breaking Mechanism of Multiwalled Carbon Nanotubes Under Tensile Load
Yu, M.-F., Lourie, O., Dyer, M. J., Moloni, K., Kelly, T. F., & Ruoff, R. S. (2000) · Science · doi:10.1126/science.287.5453.637 · Cited by 5,310
Supercooled liquids and the glass transition
Debenedetti, P. G., & Stillinger, F. H. (2001) · Nature · doi:10.1038/35065704 · Cited by 4,643
MURPHY, W. J. (1956) · Chemical & Engineering News Archive · doi:10.1021/cen-v034n034.p4017 · Cited by 3,147
Introduction to Physical Polymer Science
Sperling, L. H. (2005) · doi:10.1002/0471757128 · Cited by 2,917
THE MATERIAL BONE: Structure-Mechanical Function Relations
Weiner, S., & Wagner, H. D. (1998) · Annual Review of Materials Science · doi:10.1146/annurev.matsci.28.1.271 · Cited by 2,724
Azizi Samir, M. A. S., Alloin, F., & Dufresne, A. (2005) · Biomacromolecules · doi:10.1021/bm0493685 · Cited by 2,311
Relaxation in glassforming liquids and amorphous solids
Angell, C. A., Ngai, K. L., McKenna, G. B., McMillan, P. F., & Martin, S. W. (2000) · Journal of Applied Physics · doi:10.1063/1.1286035 · Cited by 2,238
Young, R. J., & Lovell, P. A. (1992) · Springer eBooks · doi:10.1007/978-1-4615-3478-5 · Cited by 2,116
Three-Dimensional Direct Imaging of Structural Relaxation Near the Colloidal Glass Transition
Weeks, E. R., Crocker, J. C., Levitt, A. C., Schofield, A., & Weitz, D. A. (2000) · Science · doi:10.1126/science.287.5453.627 · Cited by 1,847
Ultrastrong and Stiff Layered Polymer Nanocomposites
Podsiadlo, P., Kaushik, A. K., Arruda, E. M., Waas, A. M., Shim, B. S., Xu, J., Nandivada, H., Pumplin, B. G., Lahann, J., Ramamoorthy, A., et al. (2007) · Science · doi:10.1126/science.1143176 · Cited by 1,630
The physics of block copolymers
(1999) · Choice Reviews Online · doi:10.5860/choice.37-1566 · Cited by 1,548
Epoxy resins. Chemistry and technology
(1974) · International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts · doi:10.1016/0148-9062(74)90890-0 · Cited by 1,437
Big returns from small fibers: A review of polymer/carbon nanotube composites
Breuer, O., & Sundararaj, U. (2004) · Polymer Composites · doi:10.1002/pc.20058 · Cited by 1,246
Experimental trends in polymer nanocomposites—a review
Jordan, J., Jacob, K. I., Tannenbaum, R., Sharaf, M. A., & Jasiuk, I. (2005) · Materials Science and Engineering: A · doi:10.1016/j.msea.2004.09.044 · Cited by 1,219
The distribution of glass-transition temperatures in nanoscopically confined glass formers
Ellison, C. J., & Torkelson, J. M. (2003) · Nature Materials · doi:10.1038/nmat980 · Cited by 1,176
Heterogeneity at the glass transition: a review
Sillescu, H. (1999) · Journal of Non-Crystalline Solids · doi:10.1016/s0022-3093(98)00831-x · Cited by 1,004
Toughening mechanisms of nanoparticle-modified epoxy polymers
Johnsen, B. B., Kinloch, A. J., Mohammed, R. D., Taylor, A. C., & Sprenger, S. (2007) · Polymer · doi:10.1016/j.polymer.2006.11.038 · Cited by 942
Toughening mechanisms in elastomer-modified epoxies: Part 1 Mechanical studies
Yee, A. F., & Pearson, R. A. (1986) · Journal of Materials Science · doi:10.1007/bf01114293 · Cited by 857
Fracture mechanics of polymers
Williams, J. G. (1977) · Polymer Engineering & Science · doi:10.1002/pen.760170303 · Cited by 840
(2000) · Medical Entomology and Zoology · Cited by 822
Mineralized Collagen Fibrils: A Mechanical Model with a Staggered Arrangement of Mineral Particles
Jäger, I., & Fratzl, P. (2000) · Biophysical Journal · doi:10.1016/s0006-3495(00)76426-5 · Cited by 793
Fracture Behaviour of Polymers
(1995) · doi:10.1007/978-94-017-1594-2 · Cited by 757
Toughening mechanisms in elastomer-modified epoxies: Part 3 The effect of cross-link density
Pearson, R. A., & Yee, A. F. (1989) · Journal of Materials Science · doi:10.1007/bf01174528 · Cited by 724
Quantitative equivalence between polymer nanocomposites and thin polymer films
Bansal, A., Yang, H., Li, C., Cho, K., Benicewicz, B. C., Kumar, S. K., & Schadler, L. S. (2005) · Nature Materials · doi:10.1038/nmat1447 · Cited by 716
Structural basis for the fracture toughness of the shell of the conch Strombus gigas
Kamat, S., Su, X., Ballarini, R., & Heuer, A. H. (2000) · Nature · doi:10.1038/35016535 · Cited by 714
Block copolymers: synthetic strategies, physical properties, and applications
(2003) · Choice Reviews Online · doi:10.5860/choice.40-5816 · Cited by 638
Toughening mechanisms in elastomer-modified epoxies: Part 2 Microscopy studies
Pearson, R. A., & Yee, A. F. (1986) · Journal of Materials Science · doi:10.1007/bf01114294 · Cited by 594
Fracture behaviour of polymers
(1984) · doi:10.1016/0143-7496(84)90108-8 · Cited by 580
Failure mechanisms in toughened epoxy resins—A review
Garg, A. C., & Mai, Y. (1988) · Composites Science and Technology · doi:10.1016/0266-3538(88)90009-7 · Cited by 533
Developments in Block Copolymer Science and Technology
(2004) · Wiley eBooks · doi:10.1002/0470093943 · Cited by 494
Phase Behavior of Block Copolymer/Homopolymer Blends
Matsen, M. W. (1995) · Macromolecules · doi:10.1021/ma00121a011 · Cited by 483
Block Copolymers in Solution: Fundamentals and Applications
Hamley, I. (2005) · doi:10.1002/9780470016985 · Cited by 479
Nanostructured Thermosets from Self-Assembled Amphiphilic Block Copolymer/Epoxy Resin Mixtures
Lipic, P. M., Bates, F. S., & Hillmyer, M. A. (1998) · Journal of the American Chemical Society · doi:10.1021/ja981544s · Cited by 454
Self-Assembly and Polymerization of Epoxy Resin-Amphiphilic Block Copolymer Nanocomposites
Hillmyer, M. A., Lipic, P. M., Hajduk, D. A., Almdal, K., & Bates, F. S. (1997) · Journal of the American Chemical Society · doi:10.1021/ja963622m · Cited by 440
Polymers at Surfaces and Interfaces
Jones, R. A. L., & Richards, R. W. (1999) · Cambridge University Press eBooks · doi:10.1017/cbo9780511623196 · Cited by 428
On the toughness of brittle materials reinforced with a ductile phase
Sigl, L. S., Mataga, P. A., Dalgleish, B. J., McMeeking, R. M., & Evans, A. G. (1988) · Acta Metallurgica · doi:10.1016/0001-6160(88)90149-6 · Cited by 422
Polymer Nanocomposites: Status and Opportunities
Vaia, R. A., & Giannelis, E. P. (2001) · MRS Bulletin · doi:10.1557/mrs2001.93 · Cited by 402
Vaia, R. A., & Wagner, H. D. (2004) · Materials Today · doi:10.1016/s1369-7021(04)00506-1 · Cited by 386
Polymers at surfaces and interfaces
(1999) · Choice Reviews Online · doi:10.5860/choice.37-1567 · Cited by 365
Physical aging of thin glassy polymer films monitored by gas permeability
Huang, Y., & Paul, D. R. (2004) · Polymer · doi:10.1016/j.polymer.2004.10.019 · Cited by 341
Ellison, C. J., Mundra, M. K., & Torkelson, J. M. (2005) · Macromolecules · doi:10.1021/ma047846y · Cited by 321
Nanostructure Toughened Epoxy Resins
Dean, J. M., Verghese, N. E., Pham, H. Q., & Bates, F. S. (2003) · Macromolecules · doi:10.1021/ma034807y · Cited by 292
Starr, F. W., Schrøder, T. B., & Glotzer, S. C. (2001) · Physical Review E · doi:10.1103/physreve.64.021802 · Cited by 275
Reactive Block Copolymers for Modification of Thermosetting Epoxy
Grubbs, R. B., Dean, J. M., Broz, M. E., & Bates, F. S. (2000) · Macromolecules · doi:10.1021/ma001414f · Cited by 270
Ritzenthaler, S., Court, F., Girard-Reydet, E., Leibler, L., & Pascault, J. P. (2003) · Macromolecules · doi:10.1021/ma0211075 · Cited by 253
Role of particle cavitation in rubber-toughened epoxies: 1. Microvoid toughening
Bagheri, R., & Pearson, R. A. (1996) · Polymer · doi:10.1016/0032-3861(96)00295-9 · Cited by 227
Micellar structure and mechanical properties of block copolymer‐modified epoxies
Dean, J. M., Lipic, P. M., Grubbs, R. B., Cook, R. F., & Bates, F. S. (2001) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.10062 · Cited by 224
Rebizant, V., Venet, A.-S., Tournilhac, F., Girard-Reydet, E., Navarro, C., Pascault, J.-P., & Leibler, L. (2004) · Macromolecules · doi:10.1021/ma0490754 · Cited by 222
Meng, F., Zheng, S., Zhang, W., Li, H., & Liang, Q. (2006) · Macromolecules · doi:10.1021/ma0518499 · Cited by 221
Guo, Q., Thomann, R., Gronski, W., & Thurn-Albrecht, T. (2002) · Macromolecules · doi:10.1021/ma011971h · Cited by 207
Landry, C. J. T., Coltrain, B. K., Landry, M. R., Fitzgerald, J. J., & Long, V. K. (1993) · Macromolecules · doi:10.1021/ma00066a032 · Cited by 206
Structure and properties of PBO–PEO diblock copolymer modified epoxy
Wu, J., Thio, Y. S., & Bates, F. S. (2005) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.20488 · Cited by 204
Meng, F., Zheng, S., Li, H., Liang, Q., & Liu, T. (2006) · Macromolecules · doi:10.1021/ma060004+ · Cited by 198
Fracture processes in polymeric materials. I. The surface energy of poly(methyl methacrylate)
Berry, J. P. (1961) · Journal of Polymer Science · doi:10.1002/pol.1961.1205015313 · Cited by 195
Thio, Y. S., Wu, J., & Bates, F. S. (2006) · Macromolecules · doi:10.1021/ma052731v · Cited by 186
Elastic Properties of a Single Lamella of Montmorillonite by Molecular Dynamics Simulation
Manevitch, O. L., & Rutledge, G. C. (2004) · The Journal of Physical Chemistry B · doi:10.1021/jp0302818 · Cited by 184
Rebizant, V., Abetz, V., Tournilhac, F., Court, F., & Leibler, L. (2003) · Macromolecules · doi:10.1021/ma0347565 · Cited by 171
Developments in block copolymer science and technology
(2004) · Materials Today · doi:10.1016/s1369-7021(04)00291-3 · Cited by 160
The evolution of vesicles from bulk lamellar gels
Battaglia, G., & Ryan, A. J. (2005) · Nature Materials · doi:10.1038/nmat1501 · Cited by 148
Self-citationOn the toughness of particulate filled polymers
Evans, A. G., Williams, S. N. O., & Beaumont, P. W. R. (1985) · Journal of Materials Science · doi:10.1007/bf01113774 · Cited by 130
Kosonen, H., Ruokolainen, J., Nyholm, P., et al. (2001) · Macromolecules · doi:10.1021/ma001559m · Cited by 113
Guo, Q., Thomann, R., Gronski, W., Staneva, R., Ivanova, R. S., & Stühn, B. (2003) · Macromolecules · doi:10.1021/ma0340154 · Cited by 103
Paving the way to stronger materials
Wagner, H. D. (2007) · Nature Nanotechnology · doi:10.1038/nnano.2007.401 · Cited by 86
Sun, P., Dang, Q., Li, B., et al. (2005) · Macromolecules · doi:10.1021/ma0505979 · Cited by 84
Selectively Epoxidized Polyisoprene−Polybutadiene Block Copolymers
Grubbs, R. B., Broz, M. E., Dean, J. M., & Bates, F. S. (2000) · Macromolecules · doi:10.1021/ma992049z · Cited by 69
Mayes, A. M. (2005) · Nature Materials · doi:10.1038/nmat1470 · Cited by 68
Block copolymer modified novolac epoxy resin
Guo, Q., Dean, J. M., Grubbs, R. B., et al. (2003) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.10554 · Cited by 66
Microphase Separation in Poly(oxyethylene)−Poly(oxybutylene) Diblock Copolymers
Mai, S.-M., Fairclough, J. P. A., Terrill, N. J., Turner, S. C., Hamley, I. W., Matsen, M. W., Ryan, A. J., & Booth, C. (1998) · Macromolecules · doi:10.1021/ma981089k · Cited by 63
Self-citationCrystallization in block copolymer melts: Small soft structures that template larger hard structures
Fairclough, J. P. A., Mai, S.-M., Matsen, M. W., Bras, W., Messé, L., Turner, S. C., Gleeson, A. J., Booth, C., Hamley, I. W., & Ryan, A. J. (2001) · The Journal of Chemical Physics · doi:10.1063/1.1344605 · Cited by 53
Self-citationTransmittance and mechanical properties of PMMA‐fumed silica composites
Abramoff, B., & Covino, J. (1992) · Journal of Applied Polymer Science · doi:10.1002/app.1992.070461009 · Cited by 28
Cited by
Domun, N., Hadavinia, H., Zhang, T., Sainsbury, T., Liaghat, G. H., & Vahid, S. (2015) · Nanoscale · doi:10.1039/c5nr01354b · Cited by 808
Wan, Y.-J., Tang, L.-C., Gong, L.-X., Yan, D., Li, Y.-B., Wu, L.-B., Jiang, J.-X., & Lai, G.-Q. (2014) · Carbon · doi:10.1016/j.carbon.2013.12.050 · Cited by 788
Toughening of photo-curable polymer networks: a review
Ligon-Auer, S. C., Schwentenwein, M., Gorsche, C., Stampfl, J., & Liska, R. (2016) · Polymer Chemistry · doi:10.1039/c5py01631b · Cited by 447
Multifunctionality in Epoxy Resins
Capricho, J. C., Fox, B., & Hameed, N. (2020) · Polymer Reviews · doi:10.1080/15583724.2019.1650063 · Cited by 439
Cationic UV-Curing: Technology and Applications
Sangermano, M., Razza, N., & Crivello, J. V. (2014) · Macromolecular Materials and Engineering · doi:10.1002/mame.201300349 · Cited by 306
Metadata
- Authors
- Ruiz-Pérez, L., Royston, G. J., Fairclough, J. P. A., & Ryan, A. J.
- Venue
- Polymer
- Publisher
- Elsevier BV
- Published
- 2008-10
- Volume
- 49
- Issue
- 21
- Pages
- 4475-4488
- ISSN
- 0032-3861 (ISSN-L)
- OpenAlex
- W2100726380
- Cited by
- 302
- References
- 72
- FWCI
- 32.01
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.