The DOI matches its Crossref record; 57 of the 57 references it cites were found in a registry or an index.
Failure mechanisms in polyolefines: The role of crazing, shear yielding and the entanglement network
Open accessAbstract
Macroscopic deformation and failure modes of polyolefines are reviewed in terms of deformation and failure models based on the craze initiation and propagation model of Kramer–Berger and the craze–crack transition model of Kramer–Brown. Although these models were formulated for amorphous polymers they are also valid for semi-crystalline polymers. The important role of the underlying molecular entanglement network in this approach is reflected by the strain hardening behaviour which is shown to be a robust measure for predicting slow crack growth performance. The polymer network response explains the experimentally observed presence of two Brittle–Ductile transitions, one at low temperature or high strain rates, linked with chain scission which dominates crazing, the other at elevated temperatures or low strain rates which involves disentanglement crazing. The relation between these two Brittle–Ductile transitions and the major transition temperatures for molecular mobility such as the glass transition and the crystal α relaxation temperature are discussed. Valid strategies for increasing the crack propagation resistance in polyolefines are reviewed. Finally an outlook for further research to complement the present knowledge base is formulated.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Mechanical Properties of Solid Polymers: Third Edition
Ward, I. M., & Sweeney, J. (2012) · Wiley eBooks · doi:10.1002/9781119967125 · Cited by 2,084
Self-citationFetters, L. J., Lohse, D. J., Richter, D., Witten, T. A., & Zirkel, A. (1994) · Macromolecules · doi:10.1021/ma00095a001 · Cited by 1,999
Mechanical properties of solid polymers
Jellinek, H. H. G. (1984) · Journal of Colloid and Interface Science · doi:10.1016/0021-9797(84)90263-7 · Cited by 879
A theory for the low-temperature plastic deformation of glassy polymers
Argon, A. S. (1973) · Philosophical Magazine · doi:10.1080/14786437308220987 · Cited by 801
A review of crazing and fracture in thermoplastics
Kambour, R. P. (1973) · Journal of Polymer Science: Macromolecular Reviews · doi:10.1002/pol.1973.230070101 · Cited by 695
A generalized criterion for rubber toughening: The critical matrix ligament thickness
Wu, S. (1988) · Journal of Applied Polymer Science · doi:10.1002/app.1988.070350220 · Cited by 693
The use of a mathematical model to describe isothermal stress-strain curves in glassy thermoplastics
Haward, R. N., & Thackray, G. (1968) · Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences · doi:10.1098/rspa.1968.0029 · Cited by 646
Chain structure and entanglement
Wu, S. (1989) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.1989.090270401 · Cited by 509
The effect of entanglements in rubber elasticity
Edwards, S. F., & Vilgis, T. (1986) · Polymer · doi:10.1016/0032-3861(86)90231-4 · Cited by 460
Chain structure, phase morphology, and toughness relationships in polymers and blends
Wu, S. (1990) · Polymer Engineering & Science · doi:10.1002/pen.760301302 · Cited by 453
Stress-whitening in high-impact polystyrenes
Bucknall, C. B., & Smith, R. R. (1965) · Polymer · doi:10.1016/0032-3861(65)90028-5 · Cited by 346
On the origin of strain hardening in glassy polymers
van Melick, H. G. H., Govaert, L. E., & Meijer, H. E. H. (2003) · Polymer · doi:10.1016/s0032-3861(03)00112-5 · Cited by 336
Strain hardening of thermoplastics
Haward, R. N. (1993) · Macromolecules · doi:10.1021/ma00074a006 · Cited by 326
A molecular interpretation of the toughness of glassy polymers
Brown, H. R. (1991) · Macromolecules · doi:10.1021/ma00010a018 · Cited by 277
EPDM−Carbon Black Interactions and the Reinforcement Mechanisms, As Studied by Low-Resolution1H NMR
Litvinov, V. M., & Steeman, P. A. M. (1999) · Macromolecules · doi:10.1021/ma9910080 · Cited by 275
Flow‐induced chain fracture of isolated linear macromolecules in solution
Odell, J. A., & Keller, A. (1986) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.1986.090240901 · Cited by 256
Polymer ultradrawability: the crucial role of α-relaxation chain mobility in the crystallites
Hu, W.-G., & Schmidt-Rohr, K. (1999) · Acta Polymerica · doi:10.1002/(sici)1521-4044(19990801)50:8<271::aid-apol271>3.0.co;2-y · Cited by 228
van der Wal, A., Nijhof, R., & Gaymans, R. J. (1999) · Polymer · doi:10.1016/s0032-3861(99)00213-x · Cited by 216
Impact behaviour of nylon-rubber blends: 5. Influence of the mechanical properties of the elastomer
Borggreve, R. J. M., Gaymans, R. J., & Schuijer, J. (1989) · Polymer · doi:10.1016/0032-3861(89)90385-6 · Cited by 215
Wu, S. (1992) · Polymer International · doi:10.1002/pi.4990290313 · Cited by 196
The competition between shear deformation and crazing in glassy polymers
Donald, A. M., & Kramer, E. J. (1982) · Journal of Materials Science · doi:10.1007/bf00540402 · Cited by 189
Borggreve, R. J. M., Gaymans, R. J., & Eichenwald, H. M. (1989) · Polymer · doi:10.1016/0032-3861(89)90386-8 · Cited by 182
Deformation and Fracture Behaviour of Polymers
(2001) · Engineering Materials · doi:10.1007/978-3-662-04556-5 · Cited by 174
Séguéla, R. (2007) · Macromolecular Materials and Engineering · doi:10.1002/mame.200600389 · Cited by 165
Krishnaswamy, R. K., Yang, Q., Fernandez-Ballester, L., & Kornfield, J. A. (2008) · Macromolecules · doi:10.1021/ma070454h · Cited by 159
Deformation of Elastomeric Ethylene−Octene Copolymers
Bensason, S., Stepanov, E. V., Chum, S. P., Hiltner, A., & Baer, E. (1997) · Macromolecules · doi:10.1021/ma961685j · Cited by 149
Structure and Properties of Homogeneous Copolymers of Propylene and 1-Hexene
Poon, B., Rogunova, M. A., Hiltner, A., Baer, E., Chum, S. P., Gałęski, A., & Piórkowska, E. (2005) · Macromolecules · doi:10.1021/ma048813l · Cited by 143
Polypropylene–rubber blends: 5. Deformation mechanism during fracture
van der Wal, A., & Gaymans, R. J. (1999) · Polymer · doi:10.1016/s0032-3861(99)00216-5 · Cited by 139
Kurelec, L., Teeuwen, M., Schoffeleers, H. M., & Deblieck, R. A. C. (2005) · Polymer · doi:10.1016/j.polymer.2005.05.061 · Cited by 138
Self-citationvan der Wal, A., Verheul, A. J. J., & Gaymans, R. J. (1999) · Polymer · doi:10.1016/s0032-3861(99)00215-3 · Cited by 124
Predicting chain conformation and entanglement of polymers from chemical structure
Wu, S. (1992) · Polymer Engineering and Science · doi:10.1002/pen.760321209 · Cited by 119
Litvinov, V. M. (2006) · Macromolecules · doi:10.1021/ma061911h · Cited by 117
Strain hardening and its relation to Bauschinger effects in oriented polymers
Senden, D. J. A., van Dommelen, J. A. W., & Govaert, L. E. (2010) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.22056 · Cited by 111
Rheological Properties of 1,4-Polyisoprene over a Large Molecular Weight Range
Abdel‐Goad, M. A. ‐., Pyckhout‐Hintzen, W., Kahle, S., Allgaier, J., Richter, D., & Fetters, L. J. (2004) · Macromolecules · doi:10.1021/ma030557+ · Cited by 106
Physical basis of distortional and dilational plastic flow in glassy polymers
Argon, A. S. (1973) · Journal of Macromolecular Science Part B · doi:10.1080/00222347308201637 · Cited by 106
Micromechanics of crack growth into a craze in a polymer glass
Hui, C., Ruina, A. L., Creton, C., et al. (1992) · Macromolecules · doi:10.1021/ma00041a018 · Cited by 104
Rheology of polypropylene in the solid state
Duffo, P., Monasse, B., Haudin, J. M., G'Sell, C., & Dahoun, A. (1995) · Journal of Materials Science · doi:10.1007/bf00356330 · Cited by 92
Polymer chain entanglements and brittle fracture
Mikos, A. G., & Peppas, N. A. (1988) · The Journal of Chemical Physics · doi:10.1063/1.454205 · Cited by 85
In situ AFM investigation of crazing in polybutene spherulites under tensile drawing
Thomas, C., Ferreiro, V., Coulon, G., & Séguéla, R. (2007) · Polymer · doi:10.1016/j.polymer.2007.07.062 · Cited by 79
Open questions in the physics of deformation of polymer glasses
Krämer, E. J. (2005) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.20639 · Cited by 75
Slow crack growth in polyethylene: A novel predictive model based on the creep of craze fibrils
Rose, L. J., Channell, A. D., Frye, C. J., & Capaccio, G. (1994) · Journal of Applied Polymer Science · doi:10.1002/app.1994.070541314 · Cited by 71
A review on the development of liquid chromatography systems for polyolefins
Macko, T., Brüll, R., Zhu, Y., & Wang, Y. (2010) · Journal of Separation Science · doi:10.1002/jssc.201000516 · Cited by 70
The effect of temperature on crazing mechanisms in polystyrene
Donald, A. M. (1985) · Journal of Materials Science · doi:10.1007/bf00556095 · Cited by 66
The yield and thermoelastic properties of oriented poly(methyl methacrylate)
Botto, P., Duckett, R. A., & Ward, I. M. (1987) · Polymer · doi:10.1016/0032-3861(87)90414-9 · Cited by 64
Self-citationEffect of Short-Chain Branching on the Rheology of Polyolefins
García‐Franco, C. A., Harrington, B. A., & Lohse, D. J. (2006) · Macromolecules · doi:10.1021/ma052581o · Cited by 63
Does the strain hardening modulus of glassy polymers scale with the flow stress?
Govaert, L. E., Engels, T. A. P., Wendlandt, M., Tervoort, T. A., & Suter, U. W. (2008) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.21579 · Cited by 63
Deformation and entanglement in semicrystalline polymers
Plummer, C. J. G., Cudré‐Mauroux, N., & Kausch, H. H. (1994) · Polymer Engineering and Science · doi:10.1002/pen.760340414 · Cited by 59
Strain hardening of high density polyethylene
Haward, R. N. (2007) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.21123 · Cited by 57
Scaling of the strain hardening modulus of glassy polymers with the flow stress
Robbins, M. O., & Hoy, R. S. (2009) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.21734 · Cited by 51
Haward, R. N. (1999) · Polymer · doi:10.1016/s0032-3861(99)00124-x · Cited by 47
Brereton, M. G., & Klein, P. G. (1988) · Polymer · doi:10.1016/0032-3861(88)90002-x · Cited by 38
A novel approach to predict the recovery time of shape memory polymers
Bonner, M., de Oca, H. M., Brown, M., & Ward, I. M. (2010) · Polymer · doi:10.1016/j.polymer.2010.01.058 · Cited by 30
Self-citationMatzen, D., & Straube, E. (1992) · Colloid & Polymer Science · doi:10.1007/bf00656922 · Cited by 23
Stephenne, V., Daoust, D., Debras, G., Dupire, M., Legras, R., & Michel, J. P. (2001) · Journal of Applied Polymer Science · doi:10.1002/app.1923 · Cited by 19
Characterization of nonideal networks by stress‐strain measurements at large extensions
Klüppel, M. (1993) · Journal of Applied Polymer Science · doi:10.1002/app.1993.070480702 · Cited by 16
Cohen‐Addad, J. P., & Guillermo, A. (2003) · Macromolecules · doi:10.1021/ma021567y · Cited by 10
Cited by
Toughness and its mechanisms in epoxy resins
Mi, X., Liang, N., Xu, H., Wu, J., Jiang, Y., Nie, B., & Zhang, D. (2022) · Progress in Materials Science · doi:10.1016/j.pmatsci.2022.100977 · Cited by 683
Cavitation during deformation of semicrystalline polymers
Pawlak, A., Galeski, A., & Rozanski, A. (2014) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.10.007 · Cited by 355
From macroplastics to microplastics: Role of water in the fragmentation of polyethylene
Julienne, F., Delorme, N., & Lagarde, F. (2019) · Chemosphere · doi:10.1016/j.chemosphere.2019.124409 · Cited by 322
Bai, H., Xiu, H., Gao, J., Deng, H., Zhang, Q., Yang, M., & Fu, Q. (2012) · ACS Applied Materials & Interfaces · doi:10.1021/am201564f · Cited by 260
Progress in Toughening Poly(Lactic Acid) with Renewable Polymers
Wang, M., Wu, Y., Li, Y.-D., & Zeng, J.-B. (2017) · Polymer Reviews · doi:10.1080/15583724.2017.1287726 · Cited by 255
Metadata
- Authors
- Deblieck, R. A. C., van Beek, D. J. M., Remerie, K., & Ward, I. M.
- Venue
- Polymer
- Publisher
- Elsevier BV
- Published
- 2011-06
- Volume
- 52
- Issue
- 14
- Pages
- 2979-2990
- ISSN
- 0032-3861 (ISSN-L)
- OpenAlex
- W2167386495
- Cited by
- 310
- References
- 57
- FWCI
- 10.64
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.