CoChat

Burr Formation and Hole Quality when Drilling Titanium and Aluminium Alloys

Open access
Abdelhafeez, A.M., Soo, S.L., Aspinwall, D.K., Dowson, A., Arnold, D. · 2015 · Procedia CIRP
Cited by 95

The DOI matches its Crossref record.

Abstract

Following a brief review of key factors affecting burr size and hole quality, the paper details experimental work involving the drilling of Ti-6Al-4 V titanium alloy together with Al7010-T7451 and Al2024-T351 aluminium alloys. Chemical vapour deposited (CVD) diamond coated carbide drills were used for the aluminium workpieces while uncoated carbide tools were employed for the titanium material. An experimental design based on response surface methodology was implemented to identify the effects of cutting speed and feed rate (each at 3 levels) on burr size, hole diameter and out of roundness as well as tool flank wear. Exit burr size was smallest when operating at the intermediate feed rate level for all three workpiece materials, with reductions in burr height of up to 50% and 75% for the titanium and aluminium alloys respectively. Out of roundness did not exceed 0.03 mm while the deviation on hole diameter was less than 0.04 mm in all trials, even after drilling 60 holes.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1016/j.procir.2015.08.019

Cites

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cited by

See all 95

Metadata

Authors
Abdelhafeez, A. M., Soo, S. L., Aspinwall, D. K., Dowson, A., & Arnold, D.
Venue
Procedia CIRP
Publisher
Elsevier BV
Published
2015
Volume
37
Pages
230-235
ISSN
2212-8271 (ISSN-L)
OpenAlex
W1882570124
Cited by
95
References
0
FWCI
6.21
Type
journal article
Language
en
Open access
diamond

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Burr Formation and Hole Quality when Drilling Titanium and Aluminium Alloys. https://app.cochat.ai/papers/10.1016/j.procir.2015.08.019
The paper
Abdelhafeez, A. M., Soo, S. L., Aspinwall, D. K., Dowson, A., & Arnold, D. (2015). Burr Formation and Hole Quality when Drilling Titanium and Aluminium Alloys. Procedia CIRP. https://doi.org/10.1016/j.procir.2015.08.019

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.