The DOI matches its Crossref record; 11 of the 11 references it cites were found in a registry or an index.
Effect of Process Parameters on the Surface Roughness of Overhanging Structures in Laser Powder Bed Fusion Additive Manufacturing
Open accessAbstract
The development of additive manufacturing has allowed for increased flexibility and complexity of designs over formative and subtractive manufacturing. However, a limiting factor of additive manufacturing is the as-built surface quality as well as the difficulty in maintaining an acceptable surface roughness in overhanging structures. In order to optimize surface roughness in these structures, samples covering a range of overhang angles and process parameters were built in a laser powder bed fusion system. Analysis of the surface roughness was then performed to determine a relationship between process parameters, angle of the overhanging surface, and surface roughness. It was found that the analysis of surface roughness metrics, such as Rpc, Rsm, and Rc, can indicate a shift between surfaces dominated by partially melted powder particles and surfaces dominated by material from the re-solidified melt track.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Surface modification of titanium, titanium alloys, and related materials for biomedical applications
LIU, X., CHU, P., & DING, C. (2004) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2004.11.001 · Cited by 3,487
Selective laser melting of biocompatible metals for rapid manufacturing of medical parts
Vandenbroucke, B., & Kruth, J. (2007) · Rapid Prototyping Journal · doi:10.1108/13552540710776142 · Cited by 981
Surface roughness analysis, modelling and prediction in selective laser melting
Strano, G., Hao, L., Everson, R. M., & Evans, K. E. (2013) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2012.11.011 · Cited by 876
Top surface and side roughness of Inconel 625 parts processed using selective laser melting
Mumtaz, K., & Hopkinson, N. (2009) · Rapid Prototyping Journal · doi:10.1108/13552540910943397 · Cited by 429
Surface Morphology in Selective Laser Melting of Metal Powders
Yadroitsev, I., & Smurov, I. (2011) · Physics Procedia · doi:10.1016/j.phpro.2011.03.034 · Cited by 349
Surface Modification of Ti6Al4V Open Porous Structures Produced by Additive Manufacturing
Pyka, G., Burakowski, A., Kerckhofs, G., Moesen, M., Van Bael, S., Schrooten, J., & Wevers, M. (2012) · Advanced Engineering Materials · doi:10.1002/adem.201100344 · Cited by 309
Manufacturing by combining Selective Laser Melting and Selective Laser Erosion/laser re-melting
Yasa, E., Kruth, J.-P., & Deckers, J. (2011) · CIRP Annals · doi:10.1016/j.cirp.2011.03.063 · Cited by 265
Surface texture measurement for additive manufacturing
Triantaphyllou, A., Giusca, C. L., Macaulay, G. D., Roerig, F., Hoebel, M., Leach, R. K., Tomita, B., & Milne, K. A. (2015) · Surface Topography: Metrology and Properties · doi:10.1088/2051-672x/3/2/024002 · Cited by 252
Selective Laser Melting of thin wall parts using pulse shaping
Mumtaz, K. A., & Hopkinson, N. (2010) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2009.09.011 · Cited by 234
The influence of heat accumulation on the surface roughness in powder-bed additive manufacturing
Jamshidinia, M., & Kovacevic, R. (2015) · Surface Topography: Metrology and Properties · doi:10.1088/2051-672x/3/1/014003 · Cited by 159
Cited by
Process defects and in situ monitoring methods in metal powder bed fusion: a review
Grasso, M., & Colosimo, B. M. (2017) · Measurement Science and Technology · doi:10.1088/1361-6501/aa5c4f · Cited by 833
Mostafaei, A., Ghiaasiaan, R., Ho, I.-T., Strayer, S., Chang, K.-C., Shamsaei, N., Shao, S., Paul, S., Yeh, A.-C., Tin, S., et al. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2023.101108 · Cited by 531
3D printing technologies: techniques, materials, and post-processing
Karakurt, I., & Lin, L. (2020) · Current Opinion in Chemical Engineering · doi:10.1016/j.coche.2020.04.001 · Cited by 346
Effect of Additive Manufacturing Process Parameters on Turbine Cooling
Snyder, J. C., & Thole, K. A. (2019) · Volume 5B: Heat Transfer · doi:10.1115/gt2019-90862 · Cited by 21
Metadata
- Authors
- Fox, J. C., Moylan, S. P., & Lane, B. M.
- Venue
- Procedia CIRP
- Publisher
- Elsevier BV
- Published
- 2016
- Volume
- 45
- Pages
- 131-134
- ISSN
- 2212-8271 (ISSN-L)
- OpenAlex
- W2434196658
- Cited by
- 377
- References
- 11
- FWCI
- 19.77
- Type
- journal article
- Language
- en
- Open access
- diamond
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Effect of Process Parameters on the Surface Roughness of Overhanging Structures in Laser Powder Bed Fusion Additive Manufacturing. https://app.cochat.ai/papers/10.1016/j.procir.2016.02.347
- The paper
- Fox, J. C., Moylan, S. P., & Lane, B. M. (2016). Effect of Process Parameters on the Surface Roughness of Overhanging Structures in Laser Powder Bed Fusion Additive Manufacturing. Procedia CIRP. https://doi.org/10.1016/j.procir.2016.02.347
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
