The DOI matches its Crossref record; 17 of the 18 references it cites were found in a registry or an index.
Rheological Evaluation of Asphalt Cements Modified with ASA Polymer and Al2O3 Nanoparticles
Open accessAbstract
This study aims to evaluate and characterize the properties of modified asphalt cements exposed to high temperature. The Acrylate Styrene Acrylonhrtilrei (ASA) polymer and nano aluminum oxide (Al2O3) nanoparticles were added to the base asphalt cement with concentrations of 3, 5 and 7% of the weight of asphalt. The storage stability, viscosity, frequency sweep and MSRC test were considered for evaluation. The results demonstrate that the addition of ASA polymer and Al2O3 nanoparticles content have a great influence on the rheological properties of the asphalt cement at high temperatures. Additionally, it is clear that the storage stability of modified asphalt cements with ASA polymer and Al2O3 nanoparticles has good compatibility among the asphalt cement and the modifiers. Moreover, the complex modulus (G*) improves as the concentration of both modifiers increases. The improvement was 63.70% for 5% ASA polymer, and 71.12% for 5% Al2O3 at 75 °C. Moreover, the modified asphalt cements demonstrates great resistance to high temperatures rutting, as the enhancement was up to 80 and 59% for 5% concentration of ASA and Al2O3. The modification of asphalt cements provides increasing the creep recovery up to 69.23 and 62.53%. It was found that the usage of ASA polymer and Al2O3 nanoparticles is able to mitigate asphalt cement problems at high temperatures, and 5% is considered as the optimum content of both modifiers.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“A 5% inclusion of Al2O3 in the asphalt mix design showed strong resistance to high temperatures [38].”
From Nanoparticles in Construction Materials and Other Applications, and Implications of Nanoparticle Use (2019) · cites this paper as [38]
Citations
Cites
Lesueur, D. (2008) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2008.08.011 · Cited by 1,709
Polymer modified asphalt binders
Yildirim, Y. (2005) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2005.07.007 · Cited by 1,059
Nanoclay-modified asphalt materials: Preparation and characterization
You, Z., Mills-Beale, J., Foley, J. M., Roy, S., Odegard, G. M., Dai, Q., & Goh, S. W. (2010) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2010.06.070 · Cited by 443
Rheological Properties and Chemical Bonding of Asphalt Modified with Nanosilica
Yao, H., You, Z., Li, L., Lee, C. H., Wingard, D., Yap, Y. K., Shi, X., & Goh, S. W. (2012) · Journal of Materials in Civil Engineering · doi:10.1061/(asce)mt.1943-5533.0000690 · Cited by 391
Nanomaterials Applied in Asphalt Modification: A Review
Fang, C., Yu, R., Liu, S., & Li, Y. (2013) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2013.04.008 · Cited by 300
Zhang, F., Yu, J., & Han, J. (2010) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2010.06.048 · Cited by 294
Modification of road bitumens with thermoplastic polymers
Lu, X., & Isacsson, U. (2000) · Polymer Testing · doi:10.1016/s0142-9418(00)00004-0 · Cited by 294
Laboratory comparison of the crumb-rubber and SBS modified bitumen and hot mix asphalt
Kök, B. V., & Çolak, H. (2011) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2011.03.005 · Cited by 257
Storage stability and compatibility of asphalt binder modified by SBS graft copolymer
Fu, H., Xie, L., Dou, D., Li, L., Yu, M., & Yao, S. (2006) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2006.03.008 · Cited by 228
Performance of asphalt binder blended with non-modified and polymer-modified nanoclay
Yao, H., You, Z., Li, L., Shi, X., Goh, S. W., Mills-Beale, J., & Wingard, D. (2012) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2012.02.056 · Cited by 182
Research works printed but not linked: 3
- Habib, 2011, Effect of Thermoplastic Copolymers on Microstructure and Viscoelastic Behavior of Bitumen, Proceeding of Malaysian Universities Transportation Research Forum and Conferences
- Masson, 2003, Thermodynamics, Phase Diagrams, and Stability of Bitumen-Polymer Blends. Energy & Fuels, 17, 714
- Shiman, 2011, Effects of Nanocomposites on the High Temperature Rheological Properties of a Pg58 Asphalt-Binder Proc
Cited by
Sorted by citations
Nanoparticles in Construction Materials and Other Applications, and Implications of Nanoparticle Use
Mohajerani, A., Burnett, L., Smith, J. V., Kurmus, H., Milas, J., Arulrajah, A., Horpibulsuk, S., & Abdul Kadir, A. (2019) · Materials · doi:10.3390/ma12193052 · Cited by 348
“A 5% inclusion of Al2O3 in the asphalt mix design showed strong resistance to high temperatures [38].”
BackgroundCaputo, P., Porto, M., Angelico, R., Loise, V., Calandra, P., & Rossi, C. O. (2020) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2020.102283 · Cited by 96
Monteiro, H., Moura, B., & Soares, N. (2022) · Journal of Building Engineering · doi:10.1016/j.jobe.2022.104736 · Cited by 83
Akbari, A., & Modarres, A. (2018) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2018.06.007 · Cited by 48
Tarar, M. A., Khan, A. H., Rehman, Z. U., Qamar, S., & Akhtar, M. N. (2020) · Materials and Structures · doi:10.1617/s11527-020-01506-8 · Cited by 41
Albayati, A. H. K., Latief, R. H., Al-Mosawe, H. M., & Wang, Y. (2024) · Applied Sciences · doi:10.3390/app14103998 · Cited by 36
Tarar, M. A., Khan, A. H., Rehman, Z. U., & Inam, A. (2019) · International Journal of Pavement Engineering · doi:10.1080/10298436.2019.1600690 · Cited by 33
Bhat, F. S., & Mir, M. S. (2020) · Road Materials and Pavement Design · doi:10.1080/14680629.2020.1778509 · Cited by 31
Broering, W. B., de Melo, J. V. S., & Manfro, A. L. (2022) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2021.126261 · Cited by 29
Dai, T., Liu, T., Qu, B., Fang, C., Zheng, S., & Jiang, G. (2022) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2022.129913 · Cited by 28
Fracture Resistance of HMA Mixtures Modified with Nanoclay and Nano-Al2O3
Pirmohammad, S., Shokorlou, Y. M., & Amani, B. (2019) · Journal of Testing and Evaluation · doi:10.1520/jte20180919 · Cited by 27
Evaluation of the performance of SBS/Nano-Al2O3 composite-modified bitumen at high temperature
Shafabakhsh, G., Bidokhti, M. A., & Divandari, H. (2020) · Road Materials and Pavement Design · doi:10.1080/14680629.2020.1772351 · Cited by 27
Mamuye, Y., Liao, M., & Do, N.-D. (2022) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2022.127304 · Cited by 27
Albayati, A. H. K., Oukaili, N., Moudhafar, M. M., Allawi, A. A., Said, A. I., & Ibrahim, T. H. (2024) · Materials · doi:10.3390/ma17174279 · Cited by 25
Tarar, M. A., Khan, A. H., Rehman, Z. U., Qamar, S., & Akhtar, M. N. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.118157 · Cited by 24
Calandra, P., Loise, V., Porto, M., Rossi, C. O., Lombardo, D., & Caputo, P. (2020) · Applied Sciences · doi:10.3390/app10155230 · Cited by 24
Application of nanotechnology in pavement engineering: a review
Shah, P. M., & Mir, M. S. (2020) · Canadian Journal of Civil Engineering · doi:10.1139/cjce-2019-0395 · Cited by 23
Adnan, A. M., & Wang, J. (2024) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2024.135267 · Cited by 22
Akbari, A., & Modarres, A. (2018) · Road Materials and Pavement Design · doi:10.1080/14680629.2018.1553733 · Cited by 21
Engineering the Effect of Nanomaterials on Bitumen and Asphalt Mixture Properties. A Review
Shafabakhsh, G., Sadeghnejad, M., & Alizadeh, S. (2023) · The Baltic Journal of Road and Bridge Engineering · doi:10.7250/bjrbe.2023-18.596 · Cited by 18
The Effect of Size on the Mechanical Properties of 3D-Printed Polymers
Sadaghian, H., Dadmand, B., Pourbaba, M., Jabbari, S., & Yeon, J. H. (2023) · Sustainability · doi:10.3390/su16010356 · Cited by 17
Laboratory Investigation of Carbon Black/Bio-Oil Composite Modified Asphalt
Zhang, P., Ouyang, L., Yang, L., Yang, Y., Lu, G., & Huang, T. (2021) · Materials · doi:10.3390/ma14174910 · Cited by 12
Experimental Investigation of Polymer and Nanomaterial modified Asphalt Binder
Emmaima, A. M., Ali, S. I. A., & Gallouz, K. S. (2024) · Engineering Technology & Applied Science Research · doi:10.48084/etasr.6607 · Cited by 12
Self-citationAli, S. I. A., Gallouz, K. S., Uwanuakwa, I. D., Alas, M., & Hasan, M. R. M. (2025) · Nanomaterials · doi:10.3390/nano15141071 · Cited by 11
Self-citationEvaluating the Rheological Performance of Bituminous Binder Containing Nano Al2O3
Bhat, F. S., & Mir, M. S. (2021) · Journal of Materials in Civil Engineering · doi:10.1061/(asce)mt.1943-5533.0004088 · Cited by 11
Broering, W. B., de Melo, J. V. S., & Manfro, A. L. (2024) · Journal of Testing and Evaluation · doi:10.1520/jte20230402 · Cited by 10
Evaluation of Rheological Behavior of Bitumen Modified with Nano Copper Oxide
Shafabakhsh, G., R.Sajadib, S., & . (2018) · International Journal of Engineering & Technology · doi:10.14419/ijet.v7i4.7.20370 · Cited by 10
Li, Z., Dong, H., Zhao, X., Wang, K., & Gao, X. (2025) · Case Studies in Construction Materials · doi:10.1016/j.cscm.2025.e05047 · Cited by 9
Kadhim, H. J., Modarres, A., & Al-Busaltan, S. F. (2024) · Case Studies in Construction Materials · doi:10.1016/j.cscm.2024.e03244 · Cited by 9
Sánchez, M. B., Fito, C., & Cajaraville, M. P. (2021) · Elsevier eBooks · doi:10.1016/b978-0-12-820505-1.00004-3 · Cited by 8
Alas, M., Abba, S. I., Ali, S. I. A., Rahim, A., & Yusoff, N. I. M. (2022) · Advances in Materials Science and Engineering · doi:10.1155/2022/9685454 · Cited by 7
Self-citationRheological Study: Temperature Properties of SBS Asphalt Under the Influence of Nano-Al2O3
Zhang, T., Song, N., Cheng, S., Han, H., Wang, Q., Yang, F., & Zhou, L. (2024) · International Journal of Pavement Research and Technology · doi:10.1007/s42947-023-00400-0 · Cited by 6
Neto, V. F. D. S., Silva, I. M., Lucena, L. C. D. F. L., Lucena, A. E. D. F. L., Neto, O. D. M. M., & de Lima, R. K. B. (2023) · Road Materials and Pavement Design · doi:10.1080/14680629.2023.2251066 · Cited by 5
Alas, M., Ali, S. I. A., Eltwati, A. S., Ali, A. S. B., & Allam, A. M. A. (2024) · Polymers · doi:10.3390/polym16223128 · Cited by 5
Self-citationA review on the enhancement of asphalt cement using different additives
AlJaberi, F. Y., Hussein, A. A., Ali, A. M., & Al-khateeb, R. T. (2022) · AIP conference proceedings · doi:10.1063/5.0107845 · Cited by 5
Hamedi, G. H., Pakenari, M. M., Tabrizi, M. T., & Pirbasti, Z. R. (2023) · Advances in Civil Engineering · doi:10.1155/2023/7353949 · Cited by 5
Nanoparticles in Construction Industry and Their Toxicity
Santhosh, G., & Nayaka, G. P. (2021) · Springer eBooks · doi:10.1007/978-3-030-76073-1_8 · Cited by 4
Characterization of Nano-Alumina Modified Asphalt Binders and Mixtures
Nazir, P., Choudhary, R., Kumar, A., & Kumar, A. (2022) · Lecture notes in civil engineering · doi:10.1007/978-981-16-9921-4_20 · Cited by 3
Properties of Microcapsules Used in Self-healing of Asphalt Pavement: A Review
(2023) · NanoWorld Journal · doi:10.17756/nwj.2023-s2-057 · Cited by 3
Potential Environmental Impacts of Nanoparticles Used in Construction Industry
Gupta, A. D., & Patil, S. Z. (2021) · Springer eBooks · doi:10.1007/978-3-030-76073-1_10 · Cited by 3
High Temperatures Characterization of Polymer Nanocomposite Modified Asphalt Binder
Ali, S. I. A., Ahmed, R. Y., & Sediq, P. (2021) · Rilem bookseries · doi:10.1007/978-3-030-46455-4_125 · Cited by 1
Self-citationLi, Z., Dong, H., Zhao, X., Wang, K., & Gao, X. (2025) · SSRN Electronic Journal · doi:10.2139/ssrn.5252244 · Cited by 1
The Evaluation of the Performance of Nano Bauxite Powder (NBP) Modified Asphalt Binder
Elghatas, H. M. A., Aman, M. Y., Ali, S. I. A., & Ali, A. S. B. (2018) · Lecture notes in civil engineering · doi:10.1007/978-981-13-2511-3_5
Self-citationUtilization of nanoceramics and its limitations in construction materials—a global perspective
Ajith, S., & Arumugaprabu, V. (2024) · Elsevier eBooks · doi:10.1016/b978-0-323-88654-3.00021-4
Kadhim, H. J., Modarres, A., & Al-Busaltan, S. F. (2025) · Journal of Materials in Civil Engineering · doi:10.1061/jmcee7.mteng-19230
gilak, M. K., Shabani, R., & Guler, M. (2026) · Road Materials and Pavement Design · doi:10.1080/14680629.2026.2689549
Research on properties of Al2O3/SBR composite modified asphaltPreprint
xu, C., Yu, P., & Fu, S. (2026) · Research Square · doi:10.21203/rs.3.rs-11215413/v1
Metadata
- Authors
- Mubaraki, M., Ali, S. I. A., Ismail, A., & Yusoff, N. I. M.
- Affiliations
- Jazan University (SA)
- National University of Malaysia (MY)
- Corresponding author
- Mubaraki, Muhammad
- Venue
- Procedia Engineering
- Publisher
- Elsevier BV
- Published
- 2016
- Volume
- 143
- Pages
- 1276-1284
- ISSN
- 1877-7058 (ISSN-L)
- OpenAlex
- W2470015672
- Cited by
- 47
- References
- 18
- Citations by year
- 2026: 2 · 2025: 4 · 2024: 9 · 2023: 5 · 2022: 7 · 2021: 6 · 2020: 7 · 2019: 3 · 2018: 4
- FWCI
- 7.63
- Type
- conference paper
- Language
- en
- Open access
- diamond
- doi.org
- Licence
- Locations
- Procedia Engineering (publishedVersion, cc-by-nc-nd)
- Funders
- Kementerian Sains, Teknologi dan Inovasi
- Ministério da Ciência, Tecnologia e Inovação (03-01-02-SF0999)
- Universiti Kebangsaan Malaysia
- Promotion and Mutual Aid Corporation for Private Schools of Japan
- Topics
- Physical Sciences › Engineering › Civil and Structural Engineering › Asphalt Pavement Performance Evaluation
- Physical Sciences › Engineering › Civil and Structural Engineering › Geotechnical and construction materials studies
- Physical Sciences › Engineering › Civil and Structural Engineering › Innovative concrete reinforcement materials
- Keywords
- Al2O3 nanoparticles, asphalt rheology, high-temperature performance, storage stability, complex modulus, rutting resistance, creep recovery, polymer-modified asphalt, nano-modified asphalt
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
