The DOI matches its Crossref record; 17 of the 18 references it cites were found in a registry or an index.
Rheological Evaluation of Asphalt Cements Modified with ASA Polymer and Al2O3 Nanoparticles
Open accessAbstract
This study aims to evaluate and characterize the properties of modified asphalt cements exposed to high temperature. The Acrylate Styrene Acrylonhrtilrei (ASA) polymer and nano aluminum oxide (Al2O3) nanoparticles were added to the base asphalt cement with concentrations of 3, 5 and 7% of the weight of asphalt. The storage stability, viscosity, frequency sweep and MSRC test were considered for evaluation. The results demonstrate that the addition of ASA polymer and Al2O3 nanoparticles content have a great influence on the rheological properties of the asphalt cement at high temperatures. Additionally, it is clear that the storage stability of modified asphalt cements with ASA polymer and Al2O3 nanoparticles has good compatibility among the asphalt cement and the modifiers. Moreover, the complex modulus (G*) improves as the concentration of both modifiers increases. The improvement was 63.70% for 5% ASA polymer, and 71.12% for 5% Al2O3 at 75 °C. Moreover, the modified asphalt cements demonstrates great resistance to high temperatures rutting, as the enhancement was up to 80 and 59% for 5% concentration of ASA and Al2O3. The modification of asphalt cements provides increasing the creep recovery up to 69.23 and 62.53%. It was found that the usage of ASA polymer and Al2O3 nanoparticles is able to mitigate asphalt cement problems at high temperatures, and 5% is considered as the optimum content of both modifiers.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“A 5% inclusion of Al2O3 in the asphalt mix design showed strong resistance to high temperatures [38].”
From Nanoparticles in Construction Materials and Other Applications, and Implications of Nanoparticle Use (2019) · cites this paper as [38]
Citations
Cites
Lesueur, D. (2008) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2008.08.011 · Cited by 1,709
Polymer modified asphalt binders
Yildirim, Y. (2005) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2005.07.007 · Cited by 1,059
Nanoclay-modified asphalt materials: Preparation and characterization
You, Z., Mills-Beale, J., Foley, J. M., Roy, S., Odegard, G. M., Dai, Q., & Goh, S. W. (2010) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2010.06.070 · Cited by 443
Rheological Properties and Chemical Bonding of Asphalt Modified with Nanosilica
Yao, H., You, Z., Li, L., Lee, C. H., Wingard, D., Yap, Y. K., Shi, X., & Goh, S. W. (2012) · Journal of Materials in Civil Engineering · doi:10.1061/(asce)mt.1943-5533.0000690 · Cited by 391
Nanomaterials Applied in Asphalt Modification: A Review
Fang, C., Yu, R., Liu, S., & Li, Y. (2013) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2013.04.008 · Cited by 300
Zhang, F., Yu, J., & Han, J. (2010) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2010.06.048 · Cited by 294
Modification of road bitumens with thermoplastic polymers
Lu, X., & Isacsson, U. (2000) · Polymer Testing · doi:10.1016/s0142-9418(00)00004-0 · Cited by 294
Laboratory comparison of the crumb-rubber and SBS modified bitumen and hot mix asphalt
Kök, B. V., & Çolak, H. (2011) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2011.03.005 · Cited by 257
Storage stability and compatibility of asphalt binder modified by SBS graft copolymer
Fu, H., Xie, L., Dou, D., Li, L., Yu, M., & Yao, S. (2006) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2006.03.008 · Cited by 228
Performance of asphalt binder blended with non-modified and polymer-modified nanoclay
Yao, H., You, Z., Li, L., Shi, X., Goh, S. W., Mills-Beale, J., & Wingard, D. (2012) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2012.02.056 · Cited by 182
Mechanistic approach for polypropylene-modified flexible pavements
Al-Hadidy, A.-R. I., & Yi-qiu, T. (2008) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2008.06.021 · Cited by 170
Zare‐Shahabadi, A., Shokuhfar, A., & Ebrahimi‐Nejad, S. (2010) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2009.12.013 · Cited by 155
Nanocellulose and Microcellulose Fibers for Concrete
Peters, S. J., Rushing, T. S., Landis, E. N., & Cummins, T. K. (2010) · Transportation Research Record Journal of the Transportation Research Board · doi:10.3141/2142-04 · Cited by 133
Ameri, M., Mansourian, A., & Sheikhmotevali, A. H. (2012) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2012.09.109 · Cited by 74
Mixed Mode Fracture Toughness of Recycled Tire Rubber-Filled Concrete for Airfield Rigid Pavements
Mubaraki, M. A., Abd‐Elhady, A. A., & Sallam, H. E. M. (2013) · International Journal of Pavement Research and Technology · Cited by 50
Self-citationApplication of Transyt-7f on Signalized Road Junction Networks in Shah Alam and Petaling Jaya
Ali, S. I. A., Ismail, A., Yahia, H. A. M., & Ladin, M. A. (2014) · Jurnal Teknologi · doi:10.11113/jt.v69.3108 · Cited by 15
Self-citationToughness Enhancement of Airfield Concrete Pavement by Using Short Fiber
Mubaraki, M. A. (2015) · Journal of Marine Science and Technology · doi:10.6119/jmst-014-0416-4 · Cited by 7
Self-citation
Research works printed but not linked: 3
- Habib, 2011, Effect of Thermoplastic Copolymers on Microstructure and Viscoelastic Behavior of Bitumen, Proceeding of Malaysian Universities Transportation Research Forum and Conferences
- Masson, 2003, Thermodynamics, Phase Diagrams, and Stability of Bitumen-Polymer Blends. Energy & Fuels, 17, 714
- Shiman, 2011, Effects of Nanocomposites on the High Temperature Rheological Properties of a Pg58 Asphalt-Binder Proc
Cited by
Sorted by citations
Nanoparticles in Construction Materials and Other Applications, and Implications of Nanoparticle Use
Mohajerani, A., Burnett, L., Smith, J. V., Kurmus, H., Milas, J., Arulrajah, A., Horpibulsuk, S., & Abdul Kadir, A. (2019) · Materials · doi:10.3390/ma12193052 · Cited by 348
“A 5% inclusion of Al2O3 in the asphalt mix design showed strong resistance to high temperatures [38].”
BackgroundCaputo, P., Porto, M., Angelico, R., Loise, V., Calandra, P., & Rossi, C. O. (2020) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2020.102283 · Cited by 96
Monteiro, H., Moura, B., & Soares, N. (2022) · Journal of Building Engineering · doi:10.1016/j.jobe.2022.104736 · Cited by 83
Akbari, A., & Modarres, A. (2018) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2018.06.007 · Cited by 48
Tarar, M. A., Khan, A. H., Rehman, Z. U., Qamar, S., & Akhtar, M. N. (2020) · Materials and Structures · doi:10.1617/s11527-020-01506-8 · Cited by 41
Metadata
- Authors
- Mubaraki, M., Ali, S. I. A., Ismail, A., & Yusoff, N. I. M.
- Affiliations
- Jazan University (SA)
- National University of Malaysia (MY)
- Corresponding author
- Mubaraki, Muhammad
- Venue
- Procedia Engineering
- Publisher
- Elsevier BV
- Published
- 2016
- Volume
- 143
- Pages
- 1276-1284
- ISSN
- 1877-7058 (ISSN-L)
- OpenAlex
- W2470015672
- Cited by
- 47
- References
- 18
- Citations by year
- 2026: 2 · 2025: 4 · 2024: 9 · 2023: 5 · 2022: 7 · 2021: 6 · 2020: 7 · 2019: 3 · 2018: 4
- FWCI
- 7.63
- Type
- conference paper
- Language
- en
- Open access
- diamond
- doi.org
- Licence
- Locations
- Procedia Engineering (publishedVersion, cc-by-nc-nd)
- Funders
- Kementerian Sains, Teknologi dan Inovasi
- Ministério da Ciência, Tecnologia e Inovação (03-01-02-SF0999)
- Universiti Kebangsaan Malaysia
- Promotion and Mutual Aid Corporation for Private Schools of Japan
- Topics
- Physical Sciences › Engineering › Civil and Structural Engineering › Asphalt Pavement Performance Evaluation
- Physical Sciences › Engineering › Civil and Structural Engineering › Geotechnical and construction materials studies
- Physical Sciences › Engineering › Civil and Structural Engineering › Innovative concrete reinforcement materials
- Keywords
- Al2O3 nanoparticles, asphalt rheology, high-temperature performance, storage stability, complex modulus, rutting resistance, creep recovery, polymer-modified asphalt, nano-modified asphalt
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
