Student or educator? Sign up with your school email and get 6 months of Pro free.
CoChat
Sign Up
Cited by 682

The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.

Sulfonated hydrocarbon membranes for medium-temperature and low-humidity proton exchange membrane fuel cells (PEMFCs)

Open access
Park, Chi Hoon, Lee, Chang Hyun, Guiver, Michael D., Lee, Young Moo·2011·Progress in Polymer Science
DOI 10.1016/j.progpolymsci.2011.06.001
Open this paper in CoChat — free account

Overview

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1016/j.progpolymsci.2011.06.001

Cites

4 of 4 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 4 references

Research works printed but not linked: 228

  1. Maugeri, 2009, Understanding oil price behavior through an analysis of a crisis, Rev Environ Econ Policy, 3, 147, 10.1093/reep/rep007 · DOI
  2. Savadogo, 1998, Emerging membranes for electrochemical systems. I. Solid polymer electrolyte membranes for fuel cell systems, J New Mater Electrochem Syst, 1, 47
  3. Steele, 2001, Materials for fuel-cell technologies, Nature, 414, 345, 10.1038/35104620 · DOI · Paper page
  4. Li, 2009, High temperature proton exchange membranes based on polybenzimidazoles for fuel cells, Prog Polym Sci, 34, 449, 10.1016/j.progpolymsci.2008.12.003 · DOI · Paper page
  5. Kreuer, 1982, Vehicle mechanism, a new model for the interpretation of the conductivity of fast proton conductors, Angew Chem Int Ed, 21, 208, 10.1002/anie.198202082 · DOI · Paper page
  6. Kreuer, 1996, Proton conductivity: materials and applications, Chem Mater, 8, 610, 10.1021/cm950192a · DOI · Paper page
  7. Eikerling, 2001, Mechanisms of proton conductance in polymer electrolyte membranes, J Phys Chem B, 105, 3646, 10.1021/jp003182s · DOI · Paper page
  8. Cukierman, 2006, Et tu, Grotthuss! and other unfinished stories, Biochim Biophys Acta, 1757, 876, 10.1016/j.bbabio.2005.12.001 · DOI · Paper page
  9. Kreuer, 2001, On the development of proton conducting polymer membranes for hydrogen and methanol fuel cells, J Membr Sci, 185, 29, 10.1016/S0376-7388(00)00632-3 · DOI · Paper page
  10. Agmon, 1995, The Grotthuss mechanism, Chem Phys Lett, 244, 456, 10.1016/0009-2614(95)00905-J · DOI
  11. Tuckerman, 1995, Ab initio molecular dynamics simulation of the solvation and transport of hydronium and hydroxyl ions in water, J Chem Phys, 103, 150, 10.1063/1.469654 · DOI · Paper page
  12. Tuckerman, 1995, Ab initio molecular dynamics simulation of the solvation and transport of H3O+ and OH− ions in water, J Phys Chem, 99, 5749, 10.1021/j100016a003 · DOI · Paper page
  13. Dippel, 1993, Proton conductivity in fused phosphoric acid: a 1H/31P PFG-NMR and QNS study, Solid State Ionics, 61, 41, 10.1016/0167-2738(93)90332-W · DOI
  14. Schuster, 2008, Proton conductivity and diffusion study of molten phosphonic acid H3PO3, Solid State Ionics, 179, 523, 10.1016/j.ssi.2008.03.030 · DOI
  15. Münch, 2001, The diffusion mechanism of an excess proton in imidazole molecule chains: first results of an ab initio molecular dynamics study, Solid State Ionics, 145, 437, 10.1016/S0167-2738(01)00941-9 · DOI · Paper page
  16. Bureekaew, 2009, One-dimensional imidazole aggregate in aluminium porous coordination polymers with high proton conductivity, Nat Mater, 8, 831, 10.1038/nmat2526 · DOI · Paper page
  17. Meier-Haack, 2005, Membranes from sulfonated block copolymers for use in fuel cells, Sep Purif Technol, 41, 207, 10.1016/j.seppur.2004.07.018 · DOI
  18. Yin, 2006, On the development of naphthalene-based sulfonated polyimide membranes for fuel cell applications, Polym J, 38, 197, 10.1295/polymj.38.197 · DOI
  19. Hickner, 2004, Alternative polymer systems for proton exchange membranes (PEMs), Chem Rev, 104, 4587, 10.1021/cr020711a · DOI
  20. Rikukawa, 2000, Proton-conducting polymer electrolyte membranes based on hydrocarbon polymers, Prog Polym Sci, 25, 1463, 10.1016/S0079-6700(00)00032-0 · DOI · Paper page
  21. Smitha, 2003, Synthesis and characterization of proton conducting polymer membranes for fuel cells, J Membr Sci, 225, 63, 10.1016/S0376-7388(03)00343-0 · DOI
  22. Miyatake, 2001, New poly(arylene ether)s with pendant phosphonic acid groups, J Polym Sci Part A Polym Chem, 39, 3770, 10.1002/pola.10032 · DOI
  23. Meng, 2003, Proton-exchange membrane electrolytes derived from phosphonic acid containing poly(arylene ether)s, Eur Polym J, 39, 627, 10.1016/S0014-3057(02)00238-0 · DOI
  24. Savett, 2002, A comparison of bis[(perfluoroalkyl)sulfonyl]imide ionomers and perfluorosulfonic acid ionomers for applications in PEM fuel-cell technology, J Electrochem Soc, 149, A1527, 10.1149/1.1516218 · DOI
  25. Hofmann, 2002, Synthesis of polyphosphazenes with sulfonimide side groups, Macromolecules, 35, 6490, 10.1021/ma020330z · DOI
  26. Park, 2009, Nafion® nanocomposite membranes: effect of fluorosurfactants on hydrophobic silica nanoparticle dispersion and direct methanol fuel cell performance, J Power Sources, 194, 646, 10.1016/j.jpowsour.2009.06.053 · DOI
  27. Souzy, 2005, Functional fluoropolymers for fuel cell membranes, Prog Polym Sci, 30, 644, 10.1016/j.progpolymsci.2005.03.004 · DOI · Paper page
  28. Park, 2010, Phase separation and water channel formation in sulfonated block copolyimide, J Phys Chem B, 114, 12036, 10.1021/jp105708m · DOI
  29. Mauritz, 2004, State of understanding of Nafion, Chem Rev, 104, 4535, 10.1021/cr0207123 · DOI · Paper page
  30. Takimoto, 2009, Hydration behavior of perfluorinated and hydrocarbon-type proton exchange membranes: relationship between morphology and proton conduction, Polymer, 50, 534, 10.1016/j.polymer.2008.11.029 · DOI
  31. Roziére, 2003, Non-fluorinated polymer materials for proton exchange membrane fuel cells, Annu Rev Mater Res, 33, 503, 10.1146/annurev.matsci.33.022702.154657 · DOI · Paper page
  32. Kobayashi, 1998, Proton-conducting polymers derived from poly(ether-etherketone) and poly(4-phenoxybenzoyl-1,4-phenylene), Solid State Ionics, 106, 219, 10.1016/S0167-2738(97)00512-2 · DOI
  33. Guo, 1999, Sulfonated and crosslinked polyphosphazene-based proton-exchange membranes, J Membr Sci, 154, 175, 10.1016/S0376-7388(98)00282-8 · DOI · Paper page
  34. Wycisk, 1996, Polyphosphazene membranes. I. Solid-state photocrosslinking of poly[(4-ethylphenoxy)-(phenoxy)phosphazene], J Appl Polym Sci, 59, 1607, 10.1002/(SICI)1097-4628(19960307)59:10<1607::AID-APP13>3.0.CO;2-T · DOI
  35. Bauman, 1948, Dowex 50, Ind Eng Chem, 40, 1350, 10.1021/ie50464a003 · DOI
  36. Genova-Dimitrova, 2001, Ionomeric membranes for proton exchange membrane fuel cell (PEMFC): sulfonated polysulfone associated with phosphatoantimonic acid, J Membr Sci, 185, 59, 10.1016/S0376-7388(00)00634-7 · DOI · Paper page
  37. Serpico, 2002, Transport and structural studies of sulfonated styrene–ethylene copolymer membranes, Macromolecules, 35, 5916, 10.1021/ma020251n · DOI
  38. Kim, 2002, Proton conductivities and methanol permeabilities of membranes made from partially sulfonated polystyrene-block-poly(ethylene-ran-butylene)-block-polystyrene copolymers, J Membr Sci, 207, 129, 10.1016/S0376-7388(02)00138-2 · DOI
  39. Hodgdon, 1968, Polyelectrolytes prepared from perfluoroalkylaryl macromolecules, J Polym Sci, 6, 171, 10.1002/pol.1968.150060116 · DOI
  40. Ding, 2002, Solid polymer electrolytes based on ionic graft polymers: effect of graft chain length on nano-structured ionic networks, Adv Funct Mater, 12, 389, 10.1002/1616-3028(20020517)12:5<389::AID-ADFM389>3.0.CO;2-5 · DOI
  41. Norsten, 2006, Highly fluorinated comb-shaped copolymers as Proton Exchange Membranes (PEMs): improving PEM properties through rational design, Adv Funct Mater, 16, 1814, 10.1002/adfm.200500763 · DOI
  42. Noshay, 1976, Sulfonated polysulfone, J Appl Polym Sci, 20, 1885, 10.1002/app.1976.070200717 · DOI · Paper page
  43. Bishop, 1985, Solubility and properties of a poly(aryl ether ketone) in strong acids, Macromolecules, 18, 86, 10.1021/ma00143a014 · DOI · Paper page
  44. Alberti, 2001, Polymeric proton conducting membranes for medium temperature fuel cells (110–160°C), J Membr Sci, 185, 73, 10.1016/S0376-7388(00)00635-9 · DOI · Paper page
  45. Xing, 2004, Synthesis and characterization of sulfonated poly(ether ether ketone) for proton exchange membranes, J Membr Sci, 229, 95, 10.1016/j.memsci.2003.09.019 · DOI · Paper page
  46. Liu, 2007, Aromatic poly(ether ketone)s with pendant sulfonic acid phenyl groups prepared by a mild sulfonation method for proton exchange membranes, Macromolecules, 40, 1934, 10.1021/ma061705+ · DOI
  47. Miyatake, 2001, Synthesis and properties of poly(arylene ether)s bearing sulfonic acid groups on pendant phenyl rings, J Polym Sci Part A Polym Chem, 39, 3211, 10.1002/pola.1303 · DOI
  48. Miyatake, 2001, Synthesis and properties of novel sulfonated arylene ether/fluorinated alkane copolymers, Macromolecules, 34, 2065, 10.1021/ma0019959 · DOI
  49. Kerres, 1996, New sulfonated engineering polymers via the metalation route. I. Sulfonated poly(ethersulfone) PSU Udel® via metalation–sulfination–oxidation, J Polym Sci Part A Polym Chem, 34, 2421, 10.1002/(SICI)1099-0518(19960915)34:12<2421::AID-POLA17>3.0.CO;2-A · DOI
  50. Schuster, 2007, Sulfonated poly(phenylene sulfone) polymers as hydrolytically and thermooxidatively stable proton conducting ionomers, Macromolecules, 40, 598, 10.1021/ma062324z · DOI · Paper page
  51. Guiver, 1988, Modification of polysulfone by metalation, J Polym Sci Part C Polym Lett, 16, 123, 10.1002/pol.1988.140260211 · DOI
  52. Guiver, 1999, Functionalized polysulfones: methods for chemical modification and membrane applications, ACS Symp Ser, 744, 137, 10.1021/bk-2000-0744.ch010 · DOI
  53. Lafitte, 2002, Sulfophenylation of polysulfones for proton-conducting fuel cell membranes, Macromol Rapid Commun, 23, 896, 10.1002/1521-3927(20021001)23:15<896::AID-MARC896>3.0.CO;2-P · DOI
  54. Lafitte, 2005, Proton conducting polysulfone ionomers carrying sulfoaryloxybenzoyl side chains, Macromol Rapid Commun, 26, 1464, 10.1002/marc.200500391 · DOI
  55. Zhao, 2006, A novel bisphenol monomer with grafting capability and the resulting poly(arylene ether sulfone)s, Macromolecules, 39, 6990, 10.1021/ma061054h · DOI
  56. Wang, 2005, Synthesis and characterization of sulphonated polymer derived from 6FDA-ODA polyimide, Polym Bull, 55, 357, 10.1007/s00289-005-0449-3 · DOI
  57. Deligöz, 2008, Preparation and characterization of sulfonated polyimide ionomers via post-sulfonation method for fuel cell applications, Polym Adv Technol, 19, 1126, 10.1002/pat.1096 · DOI
  58. Kim, 2003, Effect of acidification treatment and morphological stability of sulfonated poly(arylene ether sulfone) copolymer proton-exchange membranes for fuel-cell use above 100°C, J Polym Sci Part B Polym Phys, 41, 2816, 10.1002/polb.10496 · DOI
  59. Vallejo, 1999, Sulfonated polyimides as proton conductor exchange membranes. Physicochemical properties and separation H+/M(z+) by electrodialysis comparison with a perfluorosulfonic membrane, J Membr Sci, 160, 127, 10.1016/S0376-7388(99)00070-8 · DOI
  60. Ghassemi, 2006, Multiblock sulfonated-fluorinated poly(arylene ether)s for a proton exchange membrane fuel cell, Polymer, 47, 4132, 10.1016/j.polymer.2006.02.038 · DOI · Paper page
  61. Lee, 2007, Segmented sulfonated poly(arylene ether sulfone)-b-polyimide copolymers for proton exchange membrane fuel cells. I. Copolymer synthesis and fundamental properties, J Polym Sci Part A Polym Chem, 45, 4879, 10.1002/pola.22238 · DOI
  62. Cornet, 2000, Sulfonated polyimide membranes: a new type of ion-conducting membrane for electrochemical applications, J New Mater Electrochem Syst, 3, 33
  63. Ueda, 1993, Synthesis and characterization of aromatic poly(ether sulfone)s containing pendant sodium sulfonate groups, J Polym Sci Part A Polym Chem, 31, 853, 10.1002/pola.1993.080310402 · DOI
  64. Wang, 1998, Sodium sulfonate-functionalized poly(ether ether ketone)s, Macromol Chem Phys, 199, 1421, 10.1002/(SICI)1521-3935(19980701)199:7<1421::AID-MACP1421>3.0.CO;2-P · DOI
  65. Wang, 2001, Synthesis of highly sulfonated poly(arylene ether sulfone) random (statistical) copolymers via direct polymerization, Macromol Symp, 175, 387, 10.1002/1521-3900(200110)175:1<387::AID-MASY387>3.0.CO;2-1 · DOI
  66. Wang, 2002, Direct polymerization of sulfonated poly(arylene ether sulfone) random (statistical) copolymers: candidates for new proton exchange membranes, J Membr Sci, 197, 231, 10.1016/S0376-7388(01)00620-2 · DOI · Paper page
  67. Harrison, 2003, Influence of the bisphenol structure on the direct synthesis of sulfonated poly(arylene ether) copolymers. I, J Polym Sci Part A Polym Chem, 41, 2264, 10.1002/pola.10755 · DOI
  68. Harrison, 2005, Poly(arylene ether sulfone) copolymers and related systems from disulfonated monomer building blocks: synthesis, characterization, and performance—a topical review, Fuel Cells, 5, 201, 10.1002/fuce.200400084 · DOI · Paper page
  69. Kim, 2006, Structure–property–performance relationships of sulfonated poly(arylene ether sulfone)s as a polymer electrolyte for fuel cell applications, Polymer, 47, 4026, 10.1016/j.polymer.2006.02.032 · DOI
  70. Hickner, 2005, The chemical and structural nature of proton exchange membrane fuel cell properties, Fuel Cells, 5, 213, 10.1002/fuce.200400064 · DOI · Paper page
  71. Li, 2004, Novel sulfonated poly(ether ether ketone ketone) derived from bisphenol S, J Appl Polym Sci, 94, 1569, 10.1002/app.20861 · DOI
  72. Li, 2005, Preparation and characterization of sulfonated poly(ether ether ketone ketone) proton exchange membranes for fuel cell application, J Membr Sci, 255, 149, 10.1016/j.memsci.2005.01.046 · DOI
  73. Gao, 2004, Synthesis of poly(arylene ether ether ketone ketone) copolymers containing pendant sulfonic acid groups bonded to naphthalene as proton exchange membrane materials, Macromolecules, 37, 6748, 10.1021/ma049971f · DOI
  74. Gao, 2005, Synthesis of copoly(aryl ether ether nitrile)s containing sulfonic acid groups for PEM application, Macromolecules, 38, 3237, 10.1021/ma047572e · DOI
  75. Gao, 2006, Low-swelling proton-conducting copoly(aryl ether nitrile)s containing naphthalene structure with sulfonic acid groups meta to the ether linkage, Polymer, 47, 808, 10.1016/j.polymer.2005.12.015 · DOI
  76. Gao, 2007, Comparison of PEM properties of copoly(aryl ether ether nitrile)s containing sulfonic acid bonded to naphthalene in structurally different ways, Macromolecules, 40, 1512, 10.1021/ma0623542 · DOI
  77. Detallante, 2002, Kinetics of water vapor sorption in sulfonated polyimide membranes, Desalination, 148, 333, 10.1016/S0011-9164(02)00726-9 · DOI
  78. Genies, 2001, Soluble sulfonated naphthalenic polyimides as materials for proton exchange membranes, Polymer, 42, 359, 10.1016/S0032-3861(00)00384-0 · DOI · Paper page
  79. Genies, 2001, Stability study of sulfonated phthalic and naphthalenic polyimide structures in aqueous medium, Polymer, 42, 5097, 10.1016/S0032-3861(00)00645-5 · DOI
  80. Fang, 2002, Novel sulfonated polyimides as polyelectrolytes for fuel cell application. 1. Synthesis, proton conductivity, and water stability of polyimides from 4,4′-diaminodiphenyl ether-2,2′-disulfonic acid, Macromolecules, 35, 9022, 10.1021/ma020005b · DOI
  81. Guo, 2002, Novel sulfonated polyimides as polyelectrolytes for fuel cell application. 2. Synthesis and proton conductivity of polyimides from 9,9-bis(4-aminophenyl)fluorene-2,7-disulfonic acid, Macromolecules, 35, 6707, 10.1021/ma020260w · DOI
  82. Yin, 2004, Synthesis and properties of highly sulfonated proton conducting polyimides from bis(3-sulfopropoxy)benzidine diamines, J Mater Chem, 14, 1062, 10.1039/b313276e · DOI
  83. Yin, 2003, Synthesis, proton conductivity and methanol permeability of a novel sulfonated polyimide from 3-(2′,4′-diaminophenoxy)propane sulfonic acid, Polymer, 44, 4509, 10.1016/S0032-3861(03)00439-7 · DOI
  84. Asano, 2006, Aliphatic/aromatic polyimide ionomers as a proton conductive membrane for fuel cell applications, J Am Chem Soc, 128, 1762, 10.1021/ja0571491 · DOI · Paper page
  85. Einsla, 2004, Sulfonated naphthalene dianhydride based polyimide copolymers for proton-exchange-membrane fuel cells. I. Monomer and copolymer synthesis, J Polym Sci Part A Polym Chem, 42, 862, 10.1002/pola.11026 · DOI
  86. Einsla, 2005, Sulfonated naphthalene dianhydride based polyimide copolymers for proton-exchange-membrane fuel cells. II. Membrane properties and fuel cell performance, J Membr Sci, 255, 141, 10.1016/j.memsci.2005.01.030 · DOI
  87. Li, 2008, Synthesis and properties of novel polyimides from sulfonated binaphthalene dianhydride for proton exchange membranes, J Polym Sci Part A Polym Chem, 46, 2820, 10.1002/pola.22616 · DOI
  88. Sumner, 2004, Novel proton conducting sulfonated poly(arylene ether) copolymers containing aromatic nitriles, J Membr Sci, 239, 199, 10.1016/j.memsci.2004.03.031 · DOI
  89. Kim, 2004, Direct methanol fuel cell performance of disulfonated poly(arylene ether benzonitrile) copolymers, J Electrochem Soc, 151, A2150, 10.1149/1.1819837 · DOI
  90. Xing, 2004, Sulfonated poly(aryl ether ketone)s containing the hexafluoroisopropylidene diphenyl moiety prepared by direct copolymerization as proton exchange membranes for fuel cell application, Macromolecules, 37, 7960, 10.1021/ma0494941 · DOI
  91. Xing, 2005, Synthesis and characterization of poly(aryl ether ketone) copolymers containing (hexafluoroisopropylidene)-diphenol moiety as proton exchange membrane materials, Polymer, 46, 3257, 10.1016/j.polymer.2005.03.003 · DOI
  92. Kim, 2008, Copoly(arylene ether nitrile)s–high-performance polymer electrolytes for direct methanol fuel cells, J Electrochem Soc, 155, B21, 10.1149/1.2799583 · DOI
  93. Kim, 2008, High performance nitrile copolymers for polymer electrolyte membrane fuel cells, J Membr Sci, 321, 199, 10.1016/j.memsci.2008.04.059 · DOI
  94. Kim, 2009, Copoly(arylene ether)s containing pendant sulfonic acid groups as proton exchange membranes, Macromolecules, 42, 957, 10.1021/ma802192y · DOI
  95. Lee, 2009, Chemically tuned anode with tailored aqueous hydrocarbon binder for direct methanol fuel cells, Langmuir, 25, 8217, 10.1021/la900406d · DOI
  96. Zhang, 1999, Molecular design considerations in the synthesis of high conductivity PEMs for fuel cells, Polym Prepr Am Chem Soc Div Polym Chem, 40, 480
  97. Zhang, 2000, Molecular design of polyimides toward high proton conducting materials, Polym Prepr Am Chem Soc Div Polym Chem, 41, 1561
  98. Miyatake, 2003, Highly proton conductive polyimide electrolytes containing fluorenyl groups, Chem Commun, 2003, 368, 10.1039/b210296j · DOI
  99. Miyatake, 2003, Novel sulfonated poly(arylene ether): a proton conductive polymer electrolyte designed for fuel cells, Macromolecules, 36, 9691, 10.1021/ma035452l · DOI
  100. Chikashige, 2005, Poly(arylene ether) lonomers containing sulfofluorenyl groups for fuel cell applications, Macromolecules, 38, 7121, 10.1021/ma050856u · DOI
  101. Miyatake, 2007, Tuned polymer electrolyte membranes based on aromatic polyethers for fuel cell applications, J Am Chem Soc, 129, 3879, 10.1021/ja0672526 · DOI · Paper page
  102. Bae, 2009, Synthesis and properties of sulfonated block copolymers having fluorenyl groups for fuel-cell applications, ACS Appl Mater Interfaces, 1, 1279, 10.1021/am900165w · DOI
  103. Bae, 2009, Proton-conductive aromatic ionomers containing highly sulfonated blocks for high-temperature-operable fuel cells, Angew Chem Int Ed, 49, 317, 10.1002/anie.200905355 · DOI · Paper page
  104. Bae, 2010, Sulfonated poly(arylene ether sulfone ketone) multiblock copolymers with highly sulfonated block. Synthesis and properties, Macromolecules, 43, 2684, 10.1021/ma100291z · DOI
  105. Ghassemi, 2004, New multiblock copolymers of sulfonated poly(4′-phenyl-2,5-benzophenone) and poly(arylene ether sulfone) for proton exchange membranes. II, Polymer, 45, 5855, 10.1016/j.polymer.2004.06.009 · DOI
  106. Roy, 2006, Influence of chemical composition and sequence length on the transport properties of proton exchange membranes, J Polym Sci Part B Polym Phys, 44, 2226, 10.1002/polb.20859 · DOI
  107. Lee, 2008, Hydrophilic–hydrophobic multiblock copolymers based on poly(arylene ether sulfone) via low-temperature coupling reactions for proton exchange membrane fuel cells, Polymer, 49, 715, 10.1016/j.polymer.2007.12.023 · DOI
  108. Badami, 2009, Fundamental investigations of the effect of the linkage group on the behavior of hydrophilic–hydrophobic poly(arylene ether sulfone) multiblock copolymers for proton exchange membrane fuel cells, J Membr Sci, 333, 1, 10.1016/j.memsci.2008.12.066 · DOI
  109. Lee, 2010, Development of multiblock copolymers with novel hydroquinone-based hydrophilic blocks for proton exchange membrane (PEM) applications, J Power Sources, 195, 1772, 10.1016/j.jpowsour.2009.10.058 · DOI
  110. Einsla, 2008, Toward improved conductivity of sulfonated aromatic proton exchange membranes at low relative humidity, Chem Mater, 20, 5636, 10.1021/cm801198d · DOI
  111. Nakabayashi, 2008, Synthesis and properties of sulfonated multiblock copoly(ether sulfone)s by a chain extender, J Polym Sci Part A Polym Chem, 46, 3947, 10.1002/pola.22735 · DOI
  112. Nakabayashi, 2008, Influence of adjusted hydrophilic–hydrophobic lengths in sulfonated multiblock copoly(ether sulfone) membranes for fuel cell application, J Polym Sci Part A Polym Chem, 46, 7332, 10.1002/pola.23038 · DOI
  113. Kim, 2008, Highly fluorinated comb-shaped copolymer as proton exchange membranes (PEMs): fuel cell performance, J Power Sources, 182, 100, 10.1016/j.jpowsour.2008.03.065 · DOI
  114. Kim, 2008, Comb-shaped poly(arylene ether sulfone)s as proton exchange membranes, Macromolecules, 41, 2126, 10.1021/ma7027215 · DOI
  115. Matsumoto, 2008, Star-shaped sulfonated block copoly(ether ketone)s as proton exchange membranes, Macromolecules, 41, 7560, 10.1021/ma8015163 · DOI
  116. Lee, 2008, Sulfonated polyimide membranes grafted with sulfoalkylated side chains for proton exchange membrane fuel cell (PEMFC) applications, J Membr Sci, 313, 199, 10.1016/j.memsci.2008.01.004 · DOI
  117. Schuster, 2009, Highly sulfonated poly(phenylene sulfone): preparation and stability issues, Macromolecules, 42, 3129, 10.1021/ma900333n · DOI
  118. De Araujo, 2009, Poly(p-phenylene sulfone)s with high ion exchange capacity: ionomers with unique microstructural and transport features, Phys Chem Chem Phys, 11, 3305, 10.1039/b822069g · DOI
  119. Nakabayashi, 2010, Highly sulfonated multiblock copoly(ether sulfone)s for fuel cell membranes, J Polym Sci Part A Polym Chem, 48, 2757, 10.1002/pola.24023 · DOI
  120. Nakabayashi, 2010, Polymer electrolyte membranes based on cross-linked highly sulfonated multiblock copoly(ether sulfone)s, Macromolecules, 43, 5756, 10.1021/ma100903v · DOI
  121. Nakagawa, 2010, A high performance polymer electrolyte membrane based on sulfonated poly(ether sulfone) with binaphthyl units, J Mater Chem, 20, 6662, 10.1039/c0jm00813c · DOI
  122. Matsumura, 2008, Ionomers for proton exchange membrane fuel cells with sulfonic acid groups on the end groups: novel linear aromatic poly(sulfide-ketone)s, Macromolecules, 41, 277, 10.1021/ma071423p · DOI
  123. Matsumura, 2008, Ionomers for proton exchange membrane fuel cells with sulfonic acid groups on the end groups: novel branched poly(ether-ketone)s, Macromolecules, 41, 281, 10.1021/ma071422x · DOI
  124. Matsumura, 2008, Ionomers for proton exchange membrane fuel cells with sulfonic acid groups on the end-groups: novel branched poly(ether-ketone)s with 3,6-ditrityl-9h-carbazole end-groups, J Polym Sci Part A Polym Chem, 46, 3860, 10.1002/pola.22690 · DOI
  125. Matsumura, 2008, Synthesis, properties, and sulfonation of novel dendritic multiblock copoly(ether-sulfone), J Polym Sci Part A Polym Chem, 46, 6365, 10.1002/pola.22965 · DOI
  126. Matsumura, 2009, Ionomers for proton exchange membrane fuel cells by sulfonation of novel dendritic multiblock copoly(ether-sulfone)s, J Polym Sci Part A Polym Chem, 47, 5461, 10.1002/pola.23598 · DOI
  127. Tian, 2009, Membranes from poly(aryl ether)-based ionomers containing randomly distributed nanoclusters of 6 or 12 sulfonic acid groups, Macromolecules, 42, 1153, 10.1021/ma802456m · DOI
  128. Tian, 2009, Membranes from poly(aryl ether)-based lonomers containing multiblock segments of randomly distributed nanoclusters of 18 sulfonic acid groups, J Polym Sci Part A Polym Chem, 47, 4762, 10.1002/pola.23529 · DOI
  129. Matsumoto, 2009, Locally and densely sulfonated poly(ether sulfone)s as proton exchange membrane, Macromolecules, 42, 1161, 10.1021/ma802637w · DOI
  130. Matsumoto, 2009, Locally sulfonated poly(ether sulfone)s with highly sulfonated units as proton exchange membrane, J Polym Sci Part A Polym Chem, 47, 3444, 10.1002/pola.23403 · DOI
  131. Li, 2010, Polymer electrolyte membranes derived from new sulfone monomers with pendent sulfonic acid groups, Macromolecules, 43, 9810, 10.1021/ma102107a · DOI
  132. Kim, 2010, Moving beyond mass-based parameters for conductivity analysis of sulfonated polymers, Annu Rev Chem Biomol Eng, 1, 123, 10.1146/annurev-chembioeng-073009-101309 · DOI
  133. Kim, 2010, Molecular design aspect of sulfonated polymers for direct methanol fuel cells, ECS Trans, 33, 711, 10.1149/1.3484566 · DOI
  134. Tsang, 2007, Considerations of macromolecular structure in the design of proton conducting polymer membranes: graft versus diblock polyelectrolytes, J Am Chem Soc, 129, 15106, 10.1021/ja074765j · DOI
  135. Bouzek, 2003, H+ and Na+ ion transport properties of sulfonated poly(2,6-dimethyl-1,4-phenyleneoxide) membranes, J Electrochem Soc, 150, E329, 10.1149/1.1572484 · DOI
  136. Hasiotis, 2001, New polymer electrolytes based on blends of sulfonated polysulfones with polybenzimidazole, Electrochim Acta, 46, 2401, 10.1016/S0013-4686(01)00437-6 · DOI
  137. Kosmala, 2002, Ion-exchange membranes prepared by blending sulfonated poly(2,6-dimethyl-1,4-phenylene oxide) with polybenzimidazole, J Appl Polym Sci, 85, 1118, 10.1002/app.10632 · DOI
  138. Hong, 2008, Improvement of electrochemical performances of sulfonated poly(arylene ether sulfone) via incorporation of sulfonated poly(arylene ether benzimidazole), J Power Sources, 175, 724, 10.1016/j.jpowsour.2007.09.068 · DOI
  139. Allcock, 1991, Sulfonation of (aryloxy)- and (arylamino)phosphazenes: small-molecule compounds, polymers, and surfaces, Chem Mater, 3, 1120, 10.1021/cm00018a032 · DOI
  140. Mikhailenko, 2004, Proton conducting membranes based on cross-linked sulfonated poly(ether ether ketone) (SPEEK), J Membr Sci, 233, 93, 10.1016/j.memsci.2004.01.004 · DOI · Paper page
  141. Paul, 2008, Crosslinked sulfonated poly(arylene ether sulfone) membranes as candidate for PEMs, ECS Trans, 6, 9, 10.1149/1.2927184 · DOI
  142. Paul, 2008, Synthesis and crosslinking of partially disulfonated poly(arylene ether sulfone) random copolymers as candidates for chlorine resistant reverse osmosis membranes, Polymer, 49, 2243, 10.1016/j.polymer.2008.02.039 · DOI
  143. Sastri, 1998, Phthalonitrile cure reaction with aromatic diamines, J Polym Sci Part A Polym Chem, 36, 1885, 10.1002/(SICI)1099-0518(199808)36:11<1885::AID-POLA23>3.0.CO;2-9 · DOI
  144. Sastri, 1997, Phthalonitrile-glass fabric composites, Polym Compos, 18, 48, 10.1002/pc.10260 · DOI
  145. Lee, 2005, Water sorption, proton conduction, and methanol permeation properties of sulfonated polyimide membranes cross-linked with N,N-bis(2-hydroxyethyl)-2-aminoethanesulfonic acid (BES), Macromolecules, 39, 755, 10.1021/ma052226y · DOI
  146. Rhim, 2004, Crosslinked poly(vinyl alcohol) membranes containing sulfonic acid group: proton and methanol transport through membranes, J Membr Sci, 238, 143, 10.1016/j.memsci.2004.03.030 · DOI · Paper page
  147. Telfah, 2010, Formation and mobility of protonic charge carriers in methyl sulfonic acid–water mixtures: a model for sulfonic acid based ionomers at low degree of hydration, Solid State Ionics, 181, 461, 10.1016/j.ssi.2010.01.001 · DOI
  148. Park, 2006, Effect of crosslinked chain length in sulfonated polyimide membranes on water sorption, proton conduction, and methanol permeation properties, J Membr Sci, 285, 432, 10.1016/j.memsci.2006.09.026 · DOI
  149. Phu, 2009, Synthesis of crosslinked sulfonated poly(phenylene sulfide sulfone nitrile) for direct methanol fuel cell applications, Macromol Rapid Commun, 30, 64, 10.1002/marc.200800496 · DOI
  150. Di Vona, 2009, Analysis of temperature-promoted and solvent-assisted cross-linking in sulfonated poly(ether ether ketone) (SPEEK) proton-conducting membranes, J Phys Chem B, 113, 7505, 10.1021/jp9006679 · DOI
  151. Di Vona, 2010, High ionic exchange capacity polyphenylsulfone (SPPSU) and polyethersulfone (SPES) cross-linked by annealing treatment: thermal stability, hydration level and mechanical properties, J Membr Sci, 354, 134, 10.1016/j.memsci.2010.02.058 · DOI
  152. Jeong, 2009, Cross-linking density effect of fluorinated aromatic polyethers on transport properties, Macromolecules, 42, 1652, 10.1021/ma8024199 · DOI
  153. Lee, 2009, End-group cross-linked poly(arylene ether) for proton exchange membranes, Macromolecules, 42, 584, 10.1021/ma802233j · DOI
  154. Assink, 1991, Preparation of oxidatively stable cation-exchange membranes by the elimination of tertiary hydrogens, J Membr Sci, 56, 143, 10.1016/S0376-7388(00)80804-2 · DOI
  155. Bernardi, 1992, A mathematical model of the solid-polymer-electrolyte fuel cell, J Electrochem Soc, 139, 2477, 10.1149/1.2221251 · DOI · Paper page
  156. Li, 2007, Synthesis and characterization of partially fluorinated hydrophobic–hydrophilic multiblock copolymers containing sulfonate groups for proton exchange membrane, J Power Sources, 172, 30, 10.1016/j.jpowsour.2007.04.046 · DOI
  157. Yamaguchi, 2007, An extremely low methanol crossover and highly durable aromatic pore-filling electrolyte membrane for direct methanol fuel cells, Adv Mater, 19, 592, 10.1002/adma.200601086 · DOI
  158. Borup, 2007, Scientific aspects of polymer electrolyte fuel cell durability and degradation, Chem Rev, 107, 3904, 10.1021/cr050182l · DOI · Paper page
  159. Jung, 2006, The effect of sulfonated poly(ether ether ketone) as an electrode binder for direct methanol fuel cell (DMFC), J Power Sources, 163, 56, 10.1016/j.jpowsour.2006.01.075 · DOI
  160. Lee, 2008, Sulfonated poly(ether ether ketone) as an ionomer for direct methanol fuel cell electrodes, J Power Sources, 180, 56, 10.1016/j.jpowsour.2008.02.015 · DOI
  161. Sankir, 2007, Proton exchange membrane for DMFC and H2/air fuel cells: synthesis and characterization of partially fluorinated disulfonated poly(arylene ether benzonitrile) copolymers, J Membr Sci, 299, 8, 10.1016/j.memsci.2007.04.004 · DOI
  162. Wiles, 2007, Directly copolymerized partially fluorinated disulfonated poly(arylene ether sulfone) random copolymers for PEM fuel cell systems: synthesis, fabrication and characterization of membranes and membrane–electrode assemblies for fuel cell applications, J Membr Sci, 294, 22, 10.1016/j.memsci.2007.01.036 · DOI
  163. Nieh, 2008, Morphology of comb-shaped proton exchange membrane copolymers based on a neutron scattering study, Macromolecules, 41, 6176, 10.1021/ma800470j · DOI
  164. Hobbs, 1990, Fluorinated high-density polyethylene barrier containers, ACS Symp Ser, 423, 280, 10.1021/bk-1990-0423.ch015 · DOI
  165. Mohr, 1991, Surface fluorination of polysulfone asymmetric membranes and films, J Membr Sci, 56, 77, 10.1016/0376-7388(91)85016-X · DOI
  166. Lee, 2009, Surface-fluorinated proton-exchange membrane with high electrochemical durability for direct methanol fuel cells, ACS Appl Mater Interfaces, 1, 1113, 10.1021/am900067q · DOI
  167. Kim, 2009, Surface fluorinated poly(vinyl alcohol)/poly(styrene sulfonic acid-co-maleic acid) membrane for polymer electrolyte membrane fuel cells, J Membr Sci, 342, 138, 10.1016/j.memsci.2009.06.034 · DOI
  168. Ismail, 2003, Suppression of plasticization in polysulfone membranes for gas separations by heat-treatment technique, Sep Purif Technol, 30, 37, 10.1016/S1383-5866(02)00097-7 · DOI
  169. Park, 2005, Annealing effect of sulfonated polysulfone ionomer membranes on proton conductivity and methanol transport, J Membr Sci, 247, 103, 10.1016/j.memsci.2004.09.023 · DOI
  170. Guo, 2010, Synthesis and characterization of phenolphthalein-based poly(arylene ether sulfone) hydrophilic–hydrophobic multiblock copolymers for proton exchange membranes, Ind Eng Chem Res, 49, 12125, 10.1021/ie100785t · DOI
  171. Lee, 2009, Effects of block length and solution-casting conditions on the final morphology and properties of disulfonated poly(arylene ether sulfone) multiblock copolymer films for proton exchange membranes, Polymer, 50, 6129, 10.1016/j.polymer.2009.10.023 · DOI
  172. Chen, 2005, Preparation of three-dimensionally ordered inorganic/organic bi-continuous composite proton conducting membranes, Chem Mater, 17, 5880, 10.1021/cm050709a · DOI
  173. Lee, 2010, Preparation of high-performance polymer electrolyte nanocomposites through nanoscale silica particle dispersion, J Power Sources, 195, 1325, 10.1016/j.jpowsour.2009.08.102 · DOI
  174. Li, 2002, Pore-controlled proton conducting silica films, Adv Mater, 14, 912, 10.1002/1521-4095(20020618)14:12<912::AID-ADMA912>3.0.CO;2-L · DOI
  175. McKeen, 2008, Proton conductivity in sulfonic acid-functionalized zeolite beta: effect of hydroxyl group, Chem Mater, 20, 3791, 10.1021/cm800762x · DOI
  176. Chalkova, 2005, Nafion/TiO2 proton conductive composite membranes for PEMFCs operating at elevated temperature and reduced relative humidity, J Electrochem Soc, 152, A1035, 10.1149/1.1895225 · DOI
  177. Chalkova, 2005, Effect of TiO2 surface properties on performance of Nafion-based composite membranes in high temperature and low relative humidity PEM fuel cells, J Electrochem Soc, 152, A1742, 10.1149/1.1971216 · DOI
  178. Di Noto, 2007, Hybrid inorganic–organic proton conducting membranes based on Nafion and 5wt.% of MxOy (M=Ti, Zr, Hf, Ta and W). Part I. Synthesis properties and vibrational studies, Electrochim Acta, 53, 1618, 10.1016/j.electacta.2007.05.009 · DOI
  179. Di Noto, 2010, Structure properties and proton conductivity of Nafion/[(TiO2)(WO3)0.148]ψTiO2 nanocomposite membranes, Electrochim Acta, 55, 1431, 10.1016/j.electacta.2009.06.011 · DOI
  180. Staiti, 2001, Hybrid Nafion-silica membranes doped with heteropolyacids for application in direct methanol fuel cells, Solid State Ionics, 145, 101, 10.1016/S0167-2738(01)00919-5 · DOI
  181. Kim, 2003, Fabrication and characterization of heteropolyacid (H3PW12O40)/directly polymerized sulfonated poly(arylene ether sulfone) copolymer composite membranes for higher temperature fuel cell applications, J Membr Sci, 212, 263, 10.1016/S0376-7388(02)00507-0 · DOI
  182. Ponce, 2003, Reduction of methanol permeability in polyetherketone-heteropolyacid membranes, J Membr Sci, 217, 5, 10.1016/S0376-7388(02)00309-5 · DOI
  183. Vernon, 2005, Synthesis, characterization, and conductivity measurements of hybrid membranes containing a mono-lacunary heteropolyacid for PEM fuel cell applications, J Power Sources, 139, 141, 10.1016/j.jpowsour.2004.07.027 · DOI
  184. Kannan, 2008, Polymer electrolyte fuel cells using Nafion-based composite membranes with functionalized carbon nanotubes, Angew Chem Int Ed, 47, 2653, 10.1002/anie.200704343 · DOI · Paper page
  185. Alberti, 1996, Protonic conductivity of layered zirconium phosphonates containing –SO3H groups. III. Preparation and characterization of [gamma]-zirconium sulfoaryl phosphonates, Solid State Ionics, 84, 97, 10.1016/S0167-2738(96)83011-6 · DOI
  186. Alberti, 1997, Layered metalIV phosphonates, a large class of inorgano-organic proton conductors, Solid State Ionics, 97, 177, 10.1016/S0167-2738(97)00070-2 · DOI
  187. Alberti, 1992, Protonic conductivity of layered zirconium phosphonates containing –SO3H groups. I. Preparation and characterization of a mixed zirconium phosphonate of composition Zr(O3PR)0.73(O3PR′)1.27·nH2O, with R=–C6H4–SO3H and R′=–CH2–OH., Solid State Ionics, 50, 315, 10.1016/0167-2738(92)90235-H · DOI
  188. Kirpichnikova, 1997, Polarized light study of the CsHSO4 and CsDSO4 superprotonic crystals, Solid State Ionics, 97, 135, 10.1016/S0167-2738(97)00071-4 · DOI
  189. Mikhailenko, 2001, Sulfonated polyether ether ketone based composite polymer electrolyte membranes, Catal Today, 67, 225, 10.1016/S0920-5861(01)00290-5 · DOI
  190. Nogami, 1997, Fast protonic conductors of water-containing P2O5–ZrO2–SiO2 glasses, J Electrochem Soc, 144, 2175, 10.1149/1.1837760 · DOI
  191. Pawowski, 1990, Electric conductivity in crystal group Me3H(SeO4)2 (Me: NH4+, Rb+, Cs+), Solid State Ionics, 44, 17, 10.1016/0167-2738(90)90038-S · DOI
  192. Stein, 1996, Conductivity of group IV metal sulfophosphonates and a new class of interstratified metal amine-sulfophosphonates, Solid State Ionics, 83, 113, 10.1016/0167-2738(95)00215-4 · DOI
  193. Zaidi, 2000, Proton conducting composite membranes from polyether ether ketone and heteropolyacids for fuel cell applications, J Membr Sci, 173, 17, 10.1016/S0376-7388(00)00345-8 · DOI · Paper page
  194. Day, 2000, The mechanism of hydrated proton transport in water, J Am Chem Soc, 122, 12027, 10.1021/ja002506n · DOI
  195. Binks, 1999, Stability of oil-in-water emulsions stabilised by silica particles, Phys Chem Chem Phys, 1, 3007, 10.1039/a902209k · DOI
  196. Koros, 2004, Evolving beyond the thermal age of separation processes: membranes can lead the way, AlChE J, 50, 2326, 10.1002/aic.10330 · DOI
  197. Zou, 2008, Polymer/silica nanocomposites: preparation characterization. Properties and applications, Chem Rev, 108, 3893, 10.1021/cr068035q · DOI · Paper page
  198. Watanabe, 1996, Self-humidifying polymer electrolyte membranes for fuel cells, J Electrochem Soc, 143, 3847, 10.1149/1.1837307 · DOI · Paper page
  199. Aricò, 2003, Influence of the acid–base characteristics of inorganic fillers on the high temperature performance of composite membranes in direct methanol fuel cells, Solid State Ionics, 161, 251, 10.1016/S0167-2738(03)00283-2 · DOI
  200. Adjemian, 2006, Function and charaterization of metal oxide-Nafion composite membranes for elevated-temperature H2/O2 PEM fuel cells, Chem Mater, 18, 2238, 10.1021/cm051781b · DOI

200 of 228 shown

Cited by

Metadata

Authors
Park, C. H., Lee, C. H., Guiver, M. D., & Lee, Y. M.
Venue
Progress in Polymer Science
Publisher
Elsevier BV
Published
2011-11
Volume
36
Issue
11
Pages
1443-1498
ISSN
0079-6700 (ISSN-L)
DOI
10.1016/j.progpolymsci.2011.06.001
OpenAlex
W2010916632
Cited by
682
References
4
FWCI
40.78
Type
journal article
Language
en
Open access
green
Licence
  • www.elsevier.com/tdm/userlicense/1.0/ (tdm)
  • www.elsevier.com/legal/tdmrep-license (tdm)

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.