The DOI matches its Crossref record; 125 of the 125 references it cites were found in a registry or an index.
Polyimides containing aliphatic/alicyclic segments in the main chains
Open accessAbstract
Aliphatic/alicyclic (Al)-containing polyimides (PIs), including fully-Al-PIs and partially-Al-PIs, are widely employed in electric, electronics, optical materials, and other advanced material fields. Examples include high speed multiplayer printed wiring boards, alignment films for liquid-crystal displays, fuel cells, batteries, gas separation membranes, pervaporation membranes, biomedical applications, and composites/hybrid materials. In the past decades, research has focused on the synthesis and molecular design of fully-Al-PIs and partially-Al-PIs. However, the effects of aliphatic/alicyclic segments on the performance of fully-Al-PIs and partially-Al-PIs and their potential applications are not clear. Therefore, an overall clarification of aliphatic/alicyclic-containing monomers, the effects of aliphatic/alicyclic segments on PI performance, as well as recent applications for advanced technology are important topics for further study. This review systematically summarizes the available aliphatic/alicyclic monomers and clarifies the influence of aliphatic/alicyclic-containing segments in chain backbones on the morphology and properties of the resulting PIs. Further, the use of PIs in applications for advanced materials is discussed, along with the outlook for the future of aliphatic/alicyclic-containing polyimides and their advanced applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Materials for fuel-cell technologies
Steele, B. C. H., & Heinzel, A. (2001) · Nature · doi:10.1038/35104620 · Cited by 7,772
Robeson, L. M. (2008) · Journal of Membrane Science · doi:10.1016/j.memsci.2008.04.030 · Cited by 5,917
Covalent organic frameworks (COFs): from design to applications
Ding, S.-Y., & Wang, W. (2013) · Chem. Soc. Rev. · doi:10.1039/c2cs35072f · Cited by 4,020
Lendlein, A., & Kelch, S. (2002) · Kirk-Othmer Encyclopedia of Chemical Technology · doi:10.1002/0471238961.1908011612051404.a01 · Cited by 2,566
Molecular Compounds and their Spectra. II
Mulliken, R. S. (1952) · Journal of the American Chemical Society · doi:10.1021/ja01123a067 · Cited by 2,412
Advanced polyimide materials: Syntheses, physical properties and applications
Liaw, D.-J., Wang, K.-L., Huang, Y.-C., Lee, K.-R., Lai, J.-Y., & Ha, C.-S. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2012.02.005 · Cited by 2,187
Biodegradable, Elastic Shape-Memory Polymers for Potential Biomedical Applications
Lendlein, A., & Langer, R. (2002) · Science · doi:10.1126/science.1066102 · Cited by 2,146
Light-induced shape-memory polymers
Lendlein, A., Jiang, H., Jünger, O., & Langer, R. (2005) · Nature · doi:10.1038/nature03496 · Cited by 2,006
Stabilizing triplet excited states for ultralong organic phosphorescence
An, Z., Zheng, C., Tao, Y., Chen, R., Shi, H., Chen, T., Wang, Z., Li, H., Deng, R., Liu, X., et al. (2015) · Nature Materials · doi:10.1038/nmat4259 · Cited by 1,944
Stretchable and Foldable Silicon Integrated Circuits
Kim, D.-H., Ahn, J.-H., Choi, W. M., Kim, H.-S., Kim, T.-H., Song, J., Huang, Y. Y., Liu, Z., Lu, C., & Rogers, J. A. (2008) · Science · doi:10.1126/science.1154367 · Cited by 1,676
Activating efficient phosphorescence from purely organic materials by crystal design
Bolton, O., Lee, K., Kim, H.-J., Lin, K. Y., & Kim, J. (2011) · Nature Chemistry · doi:10.1038/nchem.984 · Cited by 1,662
Segura, J. L., Mancheño, M. J., & Zamora, F. (2016) · Chemical Society Reviews · doi:10.1039/c5cs00878f · Cited by 1,409
Tozawa, T., Jones, J. T. A., Swamy, S. I., Jiang, S., Adams, D. J., Shakespeare, S., Clowes, R., Bradshaw, D., Hasell, T., Chong, S. Y., et al. (2009) · Nature Materials · doi:10.1038/nmat2545 · Cited by 1,240
Low dielectric constant polymers for microelectronics
Maier, G. (2001) · Progress in Polymer Science · doi:10.1016/s0079-6700(00)00043-5 · Cited by 1,124
An Efficient Polymer Molecular Sieve for Membrane Gas Separations
Carta, M., Malpass-Evans, R., Croad, M., Rogan, Y., Jansen, J. C., Bernardo, P., Bazzarelli, F., & McKeown, N. B. (2013) · Science · doi:10.1126/science.1228032 · Cited by 1,119
Polymers with Cavities Tuned for Fast Selective Transport of Small Molecules and Ions
Park, H. B., Jung, C. H., Lee, Y. M., Hill, A. J., Pas, S. J., Mudie, S. T., Van Wagner, E., Freeman, B. D., & Cookson, D. J. (2007) · Science · doi:10.1126/science.1146744 · Cited by 1,071
Self-citation3D Porous Crystalline Polyimide Covalent Organic Frameworks for Drug Delivery
Fang, Q., Wang, J., Gu, S., Kaspar, R. B., Zhuang, Z., Zheng, J., Guo, H., Qiu, S., & Yan, Y. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b04147 · Cited by 1,065
Polymer electronic memories: Materials, devices and mechanisms
Ling, Q.-D., Liaw, D.-J., Zhu, C., Chan, D. S.-H., Kang, E.-T., & Neoh, K.-G. (2008) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2008.08.001 · Cited by 985
Polymers for flexible displays: From material selection to device applications
Choi, M.-C., Kim, Y., & Ha, C.-S. (2008) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2007.11.004 · Cited by 981
Shape memory polymers: Past, present and future developments
Hager, M. D., Bode, S., Weber, C., & Schubert, U. S. (2015) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2015.04.002 · Cited by 950
Polymeric membrane pervaporation
Shao, P., & Huang, R. Y. M. (2007) · Journal of Membrane Science · doi:10.1016/j.memsci.2006.10.043 · Cited by 864
Photophysics, photochemistry, and optical properties of polyimides
Hasegawa, M., & Horie, K. (2001) · Progress in Polymer Science · doi:10.1016/s0079-6700(00)00042-3 · Cited by 834
Zhao, W., He, Z., Lam, J. W. Y., Peng, Q., Ma, H., Shuai, Z., Bai, G., Hao, J., & Tang, B. Z. (2016) · Chem · doi:10.1016/j.chempr.2016.08.010 · Cited by 821
Qin, Y., Peng, Q., Ding, Y., Lin, Z., Wang, C., Li, Y., Xu, F., Li, J., Yuan, Y., He, X., et al. (2015) · ACS Nano · doi:10.1021/acsnano.5b02781 · Cited by 775
Designed synthesis of large-pore crystalline polyimide covalent organic frameworks
Fang, Q., Zhuang, Z., Gu, S., Kaspar, R. B., Zheng, J., Wang, J., Qiu, S., & Yan, Y. (2014) · Nature Communications · doi:10.1038/ncomms5503 · Cited by 753
Mixed matrix membranes using carbon molecular sieves
Vu, D. Q., Koros, W. J., & Miller, S. J. (2003) · Journal of Membrane Science · doi:10.1016/s0376-7388(02)00429-5 · Cited by 731
Polyimides: Promising Energy‐Storage Materials
Song, Z., Zhan, H., & Zhou, Y. (2010) · Angewandte Chemie International Edition · doi:10.1002/anie.201002439 · Cited by 713
Kang, Z., Peng, Y., Qian, Y., Yuan, D., Addicoat, M. A., Heine, T., Hu, Z., Tee, L., Guo, Z., & Zhao, D. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b02902 · Cited by 672
Separation of rare gases and chiral molecules by selective binding in porous organic cages
Chen, L., Reiss, P. S., Chong, S. Y., Holden, D., Jelfs, K. E., Hasell, T., Little, M. A., Kewley, A., Briggs, M. E., Stephenson, A., et al. (2014) · Nature Materials · doi:10.1038/nmat4035 · Cited by 666
Behl, M., & Lendlein, A. (2011) · Kirk-Othmer Encyclopedia of Chemical Technology · doi:10.1002/0471238961.1908011612051404.a01.pub2 · Cited by 663
Aliphatic/Aromatic Polyimide Ionomers as a Proton Conductive Membrane for Fuel Cell Applications
Asano, N., Aoki, M., Suzuki, S., Miyatake, K., Uchida, H., & Watanabe, M. (2006) · Journal of the American Chemical Society · doi:10.1021/ja0571491 · Cited by 657
Gong, Y., Chen, G., Peng, Q., Yuan, W. Z., Xie, Y., Li, S., Zhang, Y., & Tang, B. Z. (2015) · Advanced Materials · doi:10.1002/adma.201502442 · Cited by 645
High refractive index polymers: fundamental research and practical applications
Liu, J.-G., & Ueda, M. (2009) · Journal of Materials Chemistry · doi:10.1039/b909690f · Cited by 625
Recent membrane development for pervaporation processes
Ong, Y. K., Shi, G. M., Le, N. L., Tang, Y. P., Zuo, J., Nunes, S. P., & Chung, T.-S. (2016) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2016.02.003 · Cited by 597
Soluble sulfonated naphthalenic polyimides as materials for proton exchange membranes
Genies, C., Mercier, R., Sillion, B., Cornet, N., Gebel, G., & Pineri, M. (2001) · Polymer · doi:10.1016/s0032-3861(00)00384-0 · Cited by 527
Rigid and microporous polymers for gas separation membranes
Kim, S., & Lee, Y. M. (2015) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2014.10.005 · Cited by 462
Self-citationElectrospun polyimide nanofibers and their applications
Ding, Y., Hou, H., Zhao, Y., Zhu, Z., & Fong, H. (2016) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2016.06.006 · Cited by 452
Xie, Y., Ge, Y., Peng, Q., Li, C., Li, Q., & Li, Z. (2017) · Advanced Materials · doi:10.1002/adma.201606829 · Cited by 446
Mechanically Strong, Flexible Polyimide Aerogels Cross-Linked with Aromatic Triamine
Meador, M. A. B., Malow, E. J., Silva, R., Wright, S., Quade, D., Vivod, S. L., Guo, H., Guo, J., & Cakmak, M. (2012) · ACS Applied Materials & Interfaces · doi:10.1021/am2014635 · Cited by 426
Functionalized metal organic framework-polyimide mixed matrix membranes for CO2/CH4 separation
Nik, O. G., Chen, X. Y., & Kaliaguine, S. (2012) · Journal of Membrane Science · doi:10.1016/j.memsci.2012.04.003 · Cited by 416
Electrospun polyimide nanofiber-based nonwoven separators for lithium-ion batteries
Miao, Y.-E., Zhu, G.-N., Hou, H., Xia, Y.-Y., & Liu, T. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.10.027 · Cited by 416
Polyimides membranes for pervaporation and biofuels separation
Jiang, L. Y., Wang, Y., Chung, T.-S., Qiao, X. Y., & Lai, J.-Y. (2009) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2009.06.001 · Cited by 396
Xu, F., Jin, S., Zhong, H., Wu, D., Yang, X., Chen, X., Wei, H., Fu, R., & Jiang, D. (2015) · Scientific Reports · doi:10.1038/srep08225 · Cited by 392
Rigidification or interaction-induced phosphorescence of organic molecules
Baroncini, M., Bergamini, G., & Ceroni, P. (2017) · Chemical Communications · doi:10.1039/c6cc09288h · Cited by 376
Effects of cross-linking modification on gas separation performance of Matrimid membranes
Tin, P. S. (2003) · Journal of Membrane Science · doi:10.1016/j.memsci.2003.08.005 · Cited by 354
Thermally and Mechanically Enhanced Clay/Polyimide Nanocomposite via Reactive Organoclay
Tyan, H., Liu, Y.-C., & Wei, K. (1999) · Chemistry of Materials · doi:10.1021/cm990187x · Cited by 347
Polymer ultrapermeability from the inefficient packing of 2D chains
Rose, I., Bezzu, C. G., Carta, M., Comesaña-Gándara, B., Lasseuguette, E., Ferrari, M. C., Bernardo, P., Clarizia, G., Fuoco, A., Jansen, J. C., et al. (2017) · Nature Materials · doi:10.1038/nmat4939 · Cited by 324
Zhang, C., Zhang, S., Yan, Y., Xia, F., Huang, A., & Xian, Y. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b16423 · Cited by 304
Lee, K. H., Cho, D. H., Kim, Y. M., Moon, S. J., Seong, J. G., Shin, D. W., Sohn, J.-Y., Kim, J. F., & Lee, Y. M. (2017) · Energy & Environmental Science · doi:10.1039/c6ee03079c · Cited by 298
Self-citationAsymmetric Matrimid®/[Cu3(BTC)2] mixed-matrix membranes for gas separations
Basu, S., Cano-Odena, A., & Vankelecom, I. F. J. (2010) · Journal of Membrane Science · doi:10.1016/j.memsci.2010.07.005 · Cited by 292
Japip, S., Wang, H., Xiao, Y., & Shung Chung, T. (2014) · Journal of Membrane Science · doi:10.1016/j.memsci.2014.05.025 · Cited by 289
Tanaka, K., Okano, M., Toshino, H., Kita, H., & Okamoto, K. (1992) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.1992.090300813 · Cited by 253
Liaw, D., Hsu, P., Chen, W., et al. (2002) · Macromolecules · doi:10.1021/ma001523u · Cited by 239
Low Dielectric Polyimide Aerogels As Substrates for Lightweight Patch Antennas
Meador, M. A. B., Wright, S., Sandberg, A., Nguyen, B. N., Van Keuls, F. W., Mueller, C. H., Rodríguez-Solís, R., & Miranda, F. A. (2012) · ACS Applied Materials & Interfaces · doi:10.1021/am301985s · Cited by 238
A study of some properties of aromatic imides
Dine‐Hart, R. A., & Wright, W. W. (1971) · Die Makromolekulare Chemie · doi:10.1002/macp.1971.021430119 · Cited by 226
Mixed-Matrix Membrane Hollow Fibers of Cu3(BTC)2 MOF and Polyimide for Gas Separation and Adsorption
Hu, J., Cai, H., Ren, H., Wei, Y., Xu, Z., Liu, H., & Hu, Y. (2010) · Industrial & Engineering Chemistry Research · doi:10.1021/ie1014958 · Cited by 217
Shi, C., Dai, J., Shen, X., Peng, L., Li, C., Wang, X., Zhang, P., & Zhao, J. (2016) · Journal of Membrane Science · doi:10.1016/j.memsci.2016.06.035 · Cited by 215
Chen, X. Y., Vinh-Thang, H., Rodrigue, D., & Kaliaguine, S. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie3004336 · Cited by 205
Xu, B., Wu, H., Chen, J., Yang, Z., Yang, Z., Wu, Y.-C., Zhang, Y., Jin, C., Lu, P.-Y., Chi, Z., et al. (2017) · Chemical Science · doi:10.1039/c6sc03038f · Cited by 202
Tsai, M.-H., Tseng, I.-H., Chiang, J.-C., & Li, J.-J. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am501323m · Cited by 198
Li, F., Ge, J. J., Honigfort, P. S., Fang, S., Chen, J., Harris, F. W., & Cheng, S. Z. D. (1999) · Polymer · doi:10.1016/s0032-3861(98)00721-6 · Cited by 196
Liao, Y., Weber, J., & Faul, C. F. J. (2015) · Macromolecules · doi:10.1021/ma501662r · Cited by 184
Liu, J.-G., Nakamura, Y., Ogura, T., Shibasaki, Y., Ando, S., & Ueda, M. (2008) · Chemistry of Materials · doi:10.1021/cm071430s · Cited by 180
Hasegawa, M. (2017) · Polymers · doi:10.3390/polym9100520 · Cited by 180
Liang, X., Yang, Y., Jin, X., Huang, Z., & Kang, F. (2015) · Journal of Membrane Science · doi:10.1016/j.memsci.2015.06.016 · Cited by 175
Highly Selective and Permeable Porous Organic Framework Membrane for CO2 Capture
Gao, X., Zou, X., Ma, H., Meng, S., & Zhu, G. (2014) · Advanced Materials · doi:10.1002/adma.201400020 · Cited by 174
Carbon composite membranes from Matrimid® and Kapton® polyimides for gas separation
Fuertes, A. B., Nevskaia, D. M., & Centeno, T. A. (1999) · Microporous and Mesoporous Materials · doi:10.1016/s1387-1811(99)00129-8 · Cited by 170
Hydrolytically Stable Polyimide Ionomer for Fuel Cell Applications
Asano, N., Miyatake, K., & Watanabe, M. (2004) · Chemistry of Materials · doi:10.1021/cm049550c · Cited by 169
Wu, D., Shi, C., Huang, S., Qiu, X., Wang, H., Zhan, Z., Zhang, P., Zhao, J., Sun, D., & Lin, L. (2015) · Electrochimica Acta · doi:10.1016/j.electacta.2015.07.072 · Cited by 150
Metal-organic frameworks based mixed matrix membranes for pervaporation
Jia, Z., & Wu, G. (2016) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2016.08.008 · Cited by 149
Electrospun polyimide-composite separator for lithium-ion batteries
Jaritphun, S., Chung, O. H., & Park, J. S. (2015) · Electrochimica Acta · doi:10.1016/j.electacta.2015.04.142 · Cited by 140
Measurement of the thermal conductivity anisotropy in polyimide films
Kurabayashi, K., Asheghi, M., Touzelbaev, M. N., & Goodson, K. E. (1999) · Journal of Microelectromechanical Systems · doi:10.1109/84.767114 · Cited by 135
Kazama, S., Teramoto, T., & Haraya, K. (2002) · Journal of Membrane Science · doi:10.1016/s0376-7388(02)00112-6 · Cited by 134
MIL-125(Ti) based mixed matrix membranes for CO2 separation from CH4 and N2
Anjum, M. W., Bueken, B., Vos, D. E. D., & Vankelecom, I. F. J. (2015) · Journal of Membrane Science · doi:10.1016/j.memsci.2015.12.022 · Cited by 131
Yoda, S., Hasegawa, A., Suda, H., Uchimaru, Y., Haraya, K., Tsuji, T., & Otake, K. (2004) · Chemistry of Materials · doi:10.1021/cm0349250 · Cited by 129
Wan, Y., Zhu, J. C., Liao, X.-J., Jiang, S., Li, Y., Fang, H., & Hou, H. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.09.037 · Cited by 122
Kanosue, K., & Ando, S. (2016) · ACS Macro Letters · doi:10.1021/acsmacrolett.6b00642 · Cited by 120
Emmler, T., Heinrich, K., Fritsch, D., Budd, P. M., Chaukura, N., Ehlers, D., Rätzke, K., & Faupel, F. (2010) · Macromolecules · doi:10.1021/ma1008786 · Cited by 116
Sánchez‐Laínez, J., Zornoza, B., Mayoral, Á., Berenguer‐Murcia, Á., Cazorla‐Amorós, D., Téllez, C., & Coronas, J. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta06820c · Cited by 115
Polyimide as anode electrode material for rechargeable sodium batteries
Chen, L., Li, W., Wang, Y., Wang, C., & Xia, Y. (2014) · RSC Advances · doi:10.1039/c4ra03473b · Cited by 114
High Performance Polymers - Polyimides Based - From Chemistry to Applications
Abadie, M. J. M. (2012) · InTech eBooks · doi:10.5772/2834 · Cited by 112
Electrospun polyimide-based fiber membranes as polymer electrolytes for lithium-ion batteries
Wang, Q., Song, W., Wang, L., Song, Y., Shi, Q., & Fan, L. (2014) · Electrochimica Acta · doi:10.1016/j.electacta.2014.04.053 · Cited by 111
Polyimides: Promising Energy‐Storage Materials
Song, Z., Zhan, H., & Zhou, Y. (2010) · Angewandte Chemie · doi:10.1002/ange.201002439 · Cited by 109
Polyimide Aerogels Using Triisocyanate as Cross-linker
Nguyen, B. N., Meador, M. A. B., Scheiman, D. A., & McCorkle, L. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b07821 · Cited by 108
Tseng, I., Chang, J., Huang, S., & Tsai, M. (2012) · Polymer International · doi:10.1002/pi.4375 · Cited by 105
Lv, Y., Wu, J., & Xu, Z. (2010) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2010.05.029 · Cited by 105
Polyetherimide: A New Membrane‐Forming Polymer for Biomedical Applications
Seifert, B., Mihanetzis, G., Groth, T., et al. (2002) · Artificial Organs · doi:10.1046/j.1525-1594.2002.06876.x · Cited by 104
Zhuang, Y., Seong, J. G., Lee, W. H., Do, Y. S., Lee, Y. M., Wang, G., Guiver, M. D., & Lee, Y. M. (2015) · Macromolecules · doi:10.1021/acs.macromol.5b00930 · Cited by 100
Self-citationDynamic relaxation characteristics of Matrimid® polyimide
Comer, A. C., Kalika, D. S., Rowe, B. W., Freeman, B. D., & Paul, D. R. (2008) · Polymer · doi:10.1016/j.polymer.2008.12.013 · Cited by 97
Zhao, H., Cao, Y., Ding, X., Zhou, M., Liu, J., & Yuan, Q. (2008) · Journal of Membrane Science · doi:10.1016/j.memsci.2008.03.070 · Cited by 96
Mittenthal, M. S., Flowers, B. S., Bara, J. E., Whitley, J. W., Spear, S. K., Roveda, J. D., Wallace, D., Shannon, M. S., Holler, R., Martens, R., et al. (2017) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.7b00462 · Cited by 96
Feasibility of Mixed Matrix Membrane Gas Separations Employing Porous Organic Cages
Evans, J. D., Huang, D. M., Hill, M. R., Sumby, C. J., Thornton, A. W., & Doonan, C. J. (2013) · The Journal of Physical Chemistry C · doi:10.1021/jp4079184 · Cited by 88
Shaplov, A. S., Morozova, S. M., Lozinskaya, E. I., et al. (2015) · Polymer Chemistry · doi:10.1039/c5py01553g · Cited by 88
Chen, Y., Shao, G., Kong, Y., Shen, X., & Cui, S. (2017) · Chemical Engineering Journal · doi:10.1016/j.cej.2017.04.003 · Cited by 84
Weilandt, T., Kiehne, U., Bunzen, J., Schnakenburg, G., & Lützen, A. (2010) · Chemistry - A European Journal · doi:10.1002/chem.200902993 · Cited by 82
Li, J., Jiang, Y., Cheng, J., Zhang, Y., Su, H., Lam, J. W. Y., Sung, H. H. Y., Wong, K. S., Kwok, H. S., & Tang, B. Z. (2015) · Physical Chemistry Chemical Physics · doi:10.1039/c4cp04052j · Cited by 80
Jung, Y. C., Kim, J., Hayashi, T., Kim, Y. A., Endo, M., Terrones, M., & Dresselhaus, M. S. (2012) · Macromolecular Rapid Communications · doi:10.1002/marc.201100674 · Cited by 78
Xu, Y. M., Le, N. L., Zuo, J., & Chung, T. (2015) · Journal of Membrane Science · doi:10.1016/j.memsci.2015.10.059 · Cited by 76
Wang, H., Paul, D. R., & Chung, T. (2012) · Journal of Membrane Science · doi:10.1016/j.memsci.2012.12.008 · Cited by 76
Synthesis, characterization and single gas permeation properties of NaA zeolite membrane
Xu, X., Bao, Y., Song, C., Yang, W., Liu, J., & Lin, L. (2004) · Journal of Membrane Science · doi:10.1016/j.memsci.2004.09.032 · Cited by 76
Optically transparent high temperature shape memory polymers
Xiao, X., Qiu, X., Kong, D., Zhang, W., Liu, Y., & Leng, J. (2015) · Soft Matter · doi:10.1039/c5sm02703a · Cited by 71
Laser bonded microjoints between titanium and polyimide for applications in medical implants
Mian, A., Newaz, G. M., Vendra, L., Rahman, N. M., Georgiev, D. G., Auner, G. W., Witte, R., & Herfurth, H. (2005) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-005-6684-1 · Cited by 70
Kanosue, K., Augulis, R., Peckus, D., Karpicz, R., Tamulevičius, T., Tamulevičius, S., Gulbinas, V., & Ando, S. (2016) · Macromolecules · doi:10.1021/acs.macromol.5b02224 · Cited by 70
Moisture-Resistant Polyimide Aerogels Containing Propylene Oxide Links in the Backbone
Meador, M. A. B., Agnello, M., McCorkle, L., Vivod, S. L., & Wilmoth, N. G. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b10248 · Cited by 70
Ma, X., Abdulhamid, M. A., & Pinnau, I. (2017) · Macromolecules · doi:10.1021/acs.macromol.7b01054 · Cited by 67
Wang, Y., Low, Z.-X. N., Kim, S., Zhang, H., Chen, X., Hou, J., Seong, J. G., Lee, Y. M., Simon, G. P., Davies, C. H. J., et al. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201809126 · Cited by 64
Self-citationPartially bio-based polyimides from isohexide-derived diamines
Ji, X., Wang, Z., Yan, J., & Wang, Z. (2015) · Polymer · doi:10.1016/j.polymer.2015.07.051 · Cited by 62
Kanosue, K., Hirata, S., Vácha, M., Augulis, R., Gulbinas, V., Ishige, R., & Ando, S. (2018) · Materials Chemistry Frontiers · doi:10.1039/c8qm00409a · Cited by 62
Yorifuji, D., & Ando, S. (2010) · Macromolecules · doi:10.1021/ma101066p · Cited by 57
Polyimide–Organosilicate Hybrids with Improved Thermal and Optical Properties
Jung, Y., Byun, S., Park, S., & Lee, H. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am405099r · Cited by 50
Garg, P., Singh, R. P., & Choudhary, V. (2010) · Separation and Purification Technology · doi:10.1016/j.seppur.2010.11.012 · Cited by 45
Lee, J., Lee, J., Jo, H. J., Seong, J. G., Kim, J. S., Lee, W. H., Moon, J.-H., Lee, D., Oh, W.-J., Yeo, J.-G., et al. (2017) · Journal of Membrane Science · doi:10.1016/j.memsci.2017.06.032 · Cited by 45
Self-citationChemical and Physical Properties of Polyimides: Biomedical and Engineering Applications
Georgiev, A., Dimov, D., Spassova, E., Assa, J., Dineff, P. D., & Danev, G. (2012) · InTech eBooks · doi:10.5772/53918 · Cited by 40
Yang, G., Zhang, R., Huang, H., Liu, L., Wang, L., & Chen, Y. (2015) · RSC Advances · doi:10.1039/c5ra14526k · Cited by 40
Polyimide/ionic liquid composite membranes for fuel cells operating at high temperatures
Dahi, A., Fatyeyeva, K. Y., Langevin, D., Chappey, C., Rogalsky, S. P., Tarasyuk, O. P., & Marais, S. (2014) · Electrochimica Acta · doi:10.1016/j.electacta.2014.03.071 · Cited by 40
Kim, S.-K., Wang, X., Ando, S., & Wang, X. (2015) · European Polymer Journal · doi:10.1016/j.eurpolymj.2015.01.012 · Cited by 33
Wu, J., & Liou, G. (2015) · Polymer Chemistry · doi:10.1039/c5py00883b · Cited by 31
Shen, D., Liu, J., Yang, H., & Yang, S. (2013) · Chemistry Letters · doi:10.1246/cl.130623 · Cited by 31
Aliphatic–aromatic polyimide blends for H2 separation
García, M. G. L., Marchese, J. A., & Ochoa, N. A. (2010) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2010.06.038 · Cited by 29
Jiang, Y., Zhang, T., Wang, K., & Yang, J. (2017) · Journal of Porous Materials · doi:10.1007/s10934-017-0377-2 · Cited by 28
Dong, L., Sun, H., Wang, J.-T., Lee, W., & Chen, W. (2014) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.27483 · Cited by 23
Preparation of a Ductile Biopolyimide Film by Copolymerization
Hojoon, S., Wang, S., Tateyama, S., Kaneko, D., & Kaneko, T. (2016) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.6b02221 · Cited by 23
Ioan, S., Filimon, A., Hulubei, C., Stoica, I., & Dunca, S. I. (2013) · Polymer Bulletin · doi:10.1007/s00289-013-0994-0 · Cited by 17
Aksoy, B., Güngör, Ö., Köytepe, S., & Seçki̇n, T. (2015) · Polymer-Plastics Technology and Engineering · doi:10.1080/03602559.2015.1055503 · Cited by 15
Photoconductivity of Aliphatic Polyimide.
Lee, S.-A., Yamashita, T., & Horie, K. (1996) · Journal of Photopolymer Science and Technology · doi:10.2494/photopolymer.9.355 · Cited by 11
Metadata
- Authors
- Zhuang, Y., Seong, J. G., & Lee, Y. M.
- Venue
- Progress in Polymer Science
- Publisher
- Elsevier BV
- Published
- 2019-05
- Volume
- 92
- Pages
- 35-88
- ISSN
- 0079-6700 (ISSN-L)
- OpenAlex
- W2914405278
- Cited by
- 378
- References
- 125
- FWCI
- 16.20
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.