The DOI matches its Crossref record.
Effects of Defects, Surface Roughness and HIP on Fatigue Strength of Ti-6Al-4V manufactured by Additive Manufacturing
Open accessAbstract
The additive manufacturing (AM) is expected to be the promising manufacturing process for high strength or hard steels such as Ti-6Al-4V for the aerospace industry components having complex shapes. However, disadvantage or challenge of AM is presence of defects which are inevitably contained in the manufacturing process. This paper focuses on the effects of defects, surface roughness and Hot Isostatic Pressing (HIP) process on the fatigue strength of a Ti-6Al-4V manufactured by AM. The guide is presented for the fatigue design and development of high quality and high strength Ti-6Al-4V by AM processing based on the combination of the statistics of extremes on defects and the √area parameter model. Defects were mostly gas porosity and those made by lack of fusion. Many pores which were formed near surface were eliminated by HIP and eventually HIP improved fatigue strength drastically to the level of the ideal fatigue limit to be expected from the hardness. Surface roughness had strong detrimental influence on fatigue strength. The method for estimating the effective size √ area effmax of irregularly shaped defects and interacting adjacent defects was proposed from the viewpoint of fracture mechanics. Although the statistics of extremes analysis is useful for the quality control of AM, the particular surface effect and interaction effect of adjacent defects must be carefully considered. The effective defect size for adjacent defects is much larger than a single defect. Since the orientations of defects in AM materials are random, a defect in contact with specimen surface has a higher influence (termed as the effective defect size √ area eff ) than the real size of the defect from the viewpoint of fracture mechanics. Considering the volume and number of productions of components, the lower bound of the fatigue limit σ wl based on √ area effmax can be determined by the √area parameter model.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Svetlizky, D., Das, M., Zheng, B., Vyatskikh, A. L., Bose, S., Bandyopadhyay, A., Schoenung, J. M., Lavernia, E. J., & Eliaz, N. (2021) · Materials Today · doi:10.1016/j.mattod.2021.03.020 · Cited by 1,371
Sanaei, N., & Fatemi, A. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100724 · Cited by 1,029
Benedetti, M., du Plessis, A., Ritchie, R. O., Dallago, M., Razavi, N., & Berto, F. (2021) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2021.100606 · Cited by 788
Surface post-treatments for metal additive manufacturing: Progress, challenges, and opportunities
Maleki, E., Bagherifard, S., Bandini, M., & Guagliano, M. (2021) · Additive Manufacturing · doi:10.1016/j.addma.2020.101619 · Cited by 528
Romano, S., Brückner-Foit, A., Brandão, A., Gumpinger, J., Ghidini, T., & Beretta, S. (2018) · Engineering Fracture Mechanics · doi:10.1016/j.engfracmech.2017.11.002 · Cited by 521
Metadata
- Authors
- Masuo, H., Tanaka, Y., Morokoshi, S., Yagura, H., Uchida, T., Yamamoto, Y., & Murakami, Y.
- Venue
- Procedia Structural Integrity
- Publisher
- Elsevier BV
- Published
- 2017
- Volume
- 7
- Pages
- 19-26
- ISSN
- 2452-3216 (ISSN-L)
- OpenAlex
- W2773637617
- Cited by
- 190
- References
- 0
- FWCI
- 10.55
- Type
- journal article
- Language
- en
- Open access
- diamond
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Effects of Defects, Surface Roughness and HIP on Fatigue Strength of Ti-6Al-4V manufactured by Additive Manufacturing. https://app.cochat.ai/papers/10.1016/j.prostr.2017.11.055
- The paper
- Masuo, H., Tanaka, Y., Morokoshi, S., Yagura, H., Uchida, T., Yamamoto, Y., & Murakami, Y. (2017). Effects of Defects, Surface Roughness and HIP on Fatigue Strength of Ti-6Al-4V manufactured by Additive Manufacturing. Procedia Structural Integrity. https://doi.org/10.1016/j.prostr.2017.11.055
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.