Co-processing of oil palm waste and waste oil via microwave co-torrefaction: A waste reduction approach for producing solid fuel product with improved properties
The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Abstract
Abstract Microwave co-torrefaction (MCT) was performed on empty fruit bunch (the most abundant waste from oil palm industry) mixed with waste oil (used engine oil, used cooking oil) to simultaneously utilize these waste materials to produce better quality solid fuel product. The effect of temperature and types of waste oil on the product yield and fuel properties (high heating value (HHV), energy yield, and fuel ratio) were investigated. MCT provided a rapid heating (50–65 °C/min) and a shorter process time of 5–8 min than that shown by conventional torrefaction performed using furnace (> 30 min). The rapid heating could be attributed to the use of a cubical microwave cavity with helical lift for 2-dimensional movement (rotational and translational motion) that allows uniform distribution of microwave radiation for heating and torrefaction. The empty fruit bunch torrefied with used engine oil at 250 °C showed maximum energy yield of 100 wt% and produced solid fuel product with high mass yield (85.5 wt%), fuel ratio (1.8), carbon content (68.3 wt%) and fixed carbon content (62 wt%). Solid fuel product of high higher heating value (28.0 MJ/kg) was produced from microwave co-torrefaction of empty fruit bunch with used engine oil at 300 °C. Our results demonstrate that microwave-co-torrefaction represents a promising waste reduction approach to convert empty fruit bunch mixed with waste oil to produce solid fuel with improved properties.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Characteristics of hemicellulose, cellulose and lignin pyrolysis
Yang, H., Yan, R., Chen, H., Lee, D. H., & Zheng, C. (2007) · Fuel · doi:10.1016/j.fuel.2006.12.013 · Cited by 8,155
Review of the stability of biochar in soils: predictability of O:C molar ratios
Spokas, K. A. (2010) · Carbon Management · doi:10.4155/cmt.10.32 · Cited by 1,160
Xiao, X., Chen, Z., & Chen, B. (2016) · Scientific Reports · doi:10.1038/srep22644 · Cited by 309
Liew, R. K., Chai, C., Yek, P. N. Y., Phang, X. Y., Chong, M. Y., Nam, W. L., Su, M. H., Lam, W. H., Ma, N. L., & Lam, S. S. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.10.214 · Cited by 161
Self-citation
Cited by
Foong, S. Y., Liew, R. K., Yang, Y., Cheng, Y. W., Yek, P. N. Y., Wan Mahari, W. A., Lee, X. Y., Han, C. S., Vo, D.-V. N., Van Le, Q., et al. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.124401 · Cited by 749
Self-citationArpia, A. A., Chen, W.-H., Lam, S. S., Rousset, P., & de Luna, M. D. G. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.126233 · Cited by 375
Self-citationGe, S., Yek, P. N. Y., Cheng, Y. W., Xia, C., Wan Mahari, W. A., Liew, R. K., Peng, W., Yuan, T.-Q., Tabatabaei, M., Aghbashlo, M., et al. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2020.110148 · Cited by 329
Self-citationYu, K. L., Lee, X. J., Ong, H. C., Chen, W.-H., Chang, J.-S., Lin, C.-S., Show, P. L., & Ling, T. C. (2021) · Environmental Pollution · doi:10.1016/j.envpol.2020.115986 · Cited by 310
Biochar production and applications in agro and forestry systems: a review
Wang, D., Jiang, P., Zhang, H., & Yuan, W. (2020) · Science of The Total Environment · doi:10.1016/j.scitotenv.2020.137775 · Cited by 280
Various biomass pyrolysis conditions influence the porosity and pore size distribution of biochar
Muzyka, R., Misztal, E., Hrabak, J., Banks, S. W., & Sajdak, M. (2023) · Energy · doi:10.1016/j.energy.2022.126128 · Cited by 260
Strategies to Produce Cost-Effective Third-Generation Biofuel From Microalgae
Rafa, N., Ahmed, S. F., Badruddin, I. A., Mofijur, M., & Kamangar, S. (2021) · Frontiers in Energy Research · doi:10.3389/fenrg.2021.749968 · Cited by 169
Qin, L., Wu, Y., Hou, Z., & Jiang, E. (2020) · Bioresource Technology · doi:10.1016/j.biortech.2020.123682 · Cited by 131
Rashwan, S. S., Adelusi, O., Boulet, M., & Moreau, S. (2025) · Energy Conversion and Management · doi:10.1016/j.enconman.2025.119516 · Cited by 10
Metadata
- Authors
- Lam, S. S., Tsang, Y. F., Yek, P. N. Y., Liew, R. K., Osman, M. S., Peng, W., Lee, W. H., & Park, Y.-K.
- Venue
- Process Safety and Environmental Protection
- Publisher
- Elsevier BV
- Published
- 2019-08
- Volume
- 128
- Pages
- 30-35
- ISSN
- 0263-8762 (ISSN-L)
- 0957-5820
- OpenAlex
- W2946094519
- Cited by
- 107
- References
- 4
- FWCI
- 5.97
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.