The degradation investigation of biodegradable PLA/PBAT blend: Thermal stability, mechanical properties and PALS analysis
The DOI matches its Crossref record; 8 of the 8 references it cites were found in a registry or an index.
Abstract
Abstract Polymer blends of polylactide (PLA) with poly(butylene adipate-co-terephthalate) (PBAT) to improve properties of PLA has been researched widely. But very few researches focus on the degradation of the blend, which is very important for biodegradable material. Herein, PLA and PBAT blends are prepared through solution casting, and the impact of degradation on thermal and mechanical properties of the blend are analyzed. Young’s modulus of the blend tends to keep steady, while tensile strain decreases drastically with degradation going on. Degradation also leads to poor thermal stability of the blend. Positron annihilation lifetime spectroscopy (PALS) is applied for the first time to investigate degradation process of PLA/PBAT blend, it shows that free volume holes have an increase in quantity and a decrease in size at the beginning of degradation, then show a decrease in quantity and an increase in size as the degradation going on. These findings give fundamental information for PLA/PBAT degradation process and the impact on properties, which helps the further development of PLA blend modification.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
An Overview of Polylactides as Packaging Materials
Auras, R., Harte, B., & Selke, S. (2004) · Macromolecular Bioscience · doi:10.1002/mabi.200400043 · Cited by 3,454
Poly(lactic acid) modifications
Rasal, R. M., Janorkar, A. V., & Hirt, D. E. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2009.12.003 · Cited by 2,204
Biodegradability and biodegradation of poly(lactide)
Tokiwa, Y., & Calabia, B. P. (2006) · Applied Microbiology and Biotechnology · doi:10.1007/s00253-006-0488-1 · Cited by 665
Aliphatic Polyester Block Polymers: Renewable, Degradable, and Sustainable
Hillmyer, M. A., & Tolman, W. B. (2014) · Accounts of Chemical Research · doi:10.1021/ar500121d · Cited by 635
Compostability of bioplastic packaging materials: An overview
Kale, G., Kijchavengkul, T., Auras, R., Rubino, M., Selke, S. E., & Singh, S. P. (2007) · Macromolecular Bioscience · doi:10.1002/mabi.200600168 · Cited by 618
Polylactide/montmorillonite nanocomposites: study of the hydrolytic degradation
Paul, M.-A., Delcourt, C., Alexandre, M., Degée, P., Monteverde, F., & Dubois, P. (2005) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2004.10.011 · Cited by 326
Rheological, morphological, and interfacial properties of compatibilized PLA/PBAT blends
Al-Itry, R., Lamnawar, K., & Maazouz, A. (2014) · Rheologica Acta · doi:10.1007/s00397-014-0774-2 · Cited by 240
Melting behavior of poly(l-lactic acid): X-ray and DSC analyses of the melting process
Yasuniwa, M., Sakamo, K., Ono, Y., & Kawahara, W. (2008) · Polymer · doi:10.1016/j.polymer.2008.02.034 · Cited by 213
Cited by
Aversa, C., Barletta, M., Cappiello, G., & Gisario, A. (2022) · European Polymer Journal · doi:10.1016/j.eurpolymj.2022.111304 · Cited by 213
Sooraj, V., Bhagavatula, S. G. K., & Kannan, M. (2025) · Journal of Applied Polymer Science · doi:10.1002/app.57087 · Cited by 16
Yang, M., Mao, Y., Zhang, P., Li, J., Tong, Z., Liu, Z., & Chen, Y. (2025) · Green Energy & Environment · doi:10.1016/j.gee.2024.09.011 · Cited by 4
Salehiyan, R., Song, H. Y., Soleymani Eil Bakhtiari, S., Hyun, K., Nofar, M., Shyha, I., & Sun, D. (2026) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.5c04772 · Cited by 3
Metadata
- Authors
- Chen, W., Qi, C., Li, Y., & Tao, H.
- Venue
- Radiation Physics and Chemistry
- Publisher
- Elsevier BV
- Published
- 2021-03
- Volume
- 180
- Pages
- 109239
- ISSN
- 0969-806X (ISSN-L)
- OpenAlex
- W3095106624
- Cited by
- 127
- References
- 8
- FWCI
- 2.32
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: The degradation investigation of biodegradable PLA/PBAT blend: Thermal stability, mechanical properties and PALS analysis. https://app.cochat.ai/papers/10.1016/j.radphyschem.2020.109239
- The paper
- Chen, W., Qi, C., Li, Y., & Tao, H. (2021). The degradation investigation of biodegradable PLA/PBAT blend: Thermal stability, mechanical properties and PALS analysis. Radiation Physics and Chemistry. https://doi.org/10.1016/j.radphyschem.2020.109239
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.