The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Effect of technical parameters on porous structure and strength of 3D printed calcium sulfate prototypes
Open accessAbstract
Additive manufacturing methods such as three-dimensional printing (3DP) show a great potential for production of porous structure with complex internal and external structures for bone tissue engineering applications. To optimize the 3DP manufacturing process and to produce 3D printed parts with the requisite architecture and strength, there was a need to fine-tune the printing parameters. The purpose of this study was to develop optimal processing parameters based on a design of the experiments approach to evaluate the ability of 3DP for making calcium sulfate-based scaffold prototypes. The major printing parameters examined in this study were layer thickness, delay time of spreading the next layer, and build orientation of the specimens. Scaffold dimensional accuracy, porosity, and mechanical stiffness were systematically investigated using a design of experiment approach. Resulting macro-porous structures were also studied to evaluate the potential of 3DP technology for meeting the small-scale geometric requirements of bone scaffolds. Signal-to-noise ratio and analysis of variance (ANOVA) were employed to identify the important factors that influence optimal 3D printed part characteristics. The results showed that samples built using the minimum layer thickness (89 µm) and x-direction of build bed with 300 ms delay time between spreading each layer yielded the highest quality scaffold prototypes; thus, these parameters are suggested for fabrication of an engineered bone tissue scaffold. Furthermore, this study identified orientation and new layer spreading delay time as the most important factors influencing the dimensional accuracy, compressive strength, and porosity of the samples.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Experimental Design and Data Analysis for Biologists
Quinn, G. P., & Keough, M. J. (2002) · doi:10.1017/cbo9780511806384 · Cited by 10,674
Cited by
Binder jet 3D printing—Process parameters, materials, properties, modeling, and challenges
Mostafaei, A., Elliott, A. M., Barnes, J. E., Li, F., Tan, W., Cramer, C. L., Nandwana, P., & Chmielus, M. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100707 · Cited by 1,093
Additive manufacturing of advanced ceramic materials
Lakhdar, Y., Tuck, C., Binner, J., Terry, A., & Goodridge, R. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100736 · Cited by 857
The Role of 3D Printing in Medical Applications: A State of the Art
Aimar, A., Palermo, A., & Innocenti, B. (2019) · Journal of Healthcare Engineering · doi:10.1155/2019/5340616 · Cited by 685
Current state of fabrication technologies and materials for bone tissue engineering
Wubneh, A., Tsekoura, E. K., Ayranci, C., & Uludağ, H. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.09.031 · Cited by 584
Prediction of surface roughness in extrusion-based additive manufacturing with machine learning
Li, Z., Zhang, Z., Shi, J., & Wu, D. (2019) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2019.01.004 · Cited by 432
Metadata
- Authors
- Asadi-Eydivand, M., Solati-Hashjin, M., Farzad, A., & Abu Osman, N. A.
- Venue
- Robotics and Computer-Integrated Manufacturing
- Publisher
- Elsevier BV
- Published
- 2016-02
- Volume
- 37
- Pages
- 57-67
- ISSN
- 0736-5845 (ISSN-L)
- OpenAlex
- W1927710786
- Cited by
- 161
- References
- 1
- FWCI
- 16.05
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.