The DOI matches its Crossref record; 64 of the 64 references it cites were found in a registry or an index.
A big data-driven framework for sustainable and smart additive manufacturing
Abstract
Abstract From the last decade, additive manufacturing (AM) has been evolving speedily and has revealed the great potential for energy-saving and cleaner environmental production due to a reduction in material and resource consumption and other tooling requirements. In this modern era, with the advancements in manufacturing technologies, academia and industry have been given more interest in smart manufacturing for taking benefits for making their production more sustainable and effective. In the present study, the significant techniques of smart manufacturing, sustainable manufacturing, and additive manufacturing are combined to make a unified term of sustainable and smart additive manufacturing (SSAM). The paper aims to develop framework by combining big data analytics, additive manufacturing, and sustainable smart manufacturing technologies which is beneficial to the additive manufacturing enterprises. So, a framework of big data-driven sustainable and smart additive manufacturing (BD-SSAM) is proposed which helped AM industry leaders to make better decisions for the beginning of life (BOL) stage of product life cycle. Finally, an application scenario of the additive manufacturing industry was presented to demonstrate the proposed framework. The proposed framework is implemented on the BOL stage of product lifecycle due to limitation of available resources and for fabrication of AlSi10Mg alloy components by using selective laser melting (SLM) technique of AM. The results indicate that energy consumption and quality of the product are adequately controlled which is helpful for smart sustainable manufacturing, emission reduction, and cleaner production.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
Ngo, T. D., Kashani, A., Imbalzano, G., Nguyen, K. T. Q., & Hui, D. (2018) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2018.02.012 · Cited by 8,431
A Cyber-Physical Systems architecture for Industry 4.0-based manufacturing systems
Lee, J., Bagheri, B., & Kao, H.-A. (2015) · Manufacturing Letters · doi:10.1016/j.mfglet.2014.12.001 · Cited by 5,113
The Hadoop Distributed File System
Shvachko, K., Kuang, H., Radia, S., & Chansler, R. (2010) · 2010 IEEE 26th Symposium on Mass Storage Systems and Technologies (MSST) · doi:10.1109/msst.2010.5496972 · Cited by 4,834
Additive manufacturing and sustainability: an exploratory study of the advantages and challenges
Ford, S., & Despeisse, M. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.04.150 · Cited by 1,889
Lu, Y., Liu, C., Wang, K. I.-K., Huang, H., & Xu, X. (2020) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2019.101837 · Cited by 1,624
Big data and predictive analytics for supply chain and organizational performance
Gunasekaran, A., Papadopoulos, T., Dubey, R., Wamba, S. F., Childe, S. J., Hazen, B., & Akter, S. (2017) · Journal of Business Research · doi:10.1016/j.jbusres.2016.08.004 · Cited by 1,138
A global sustainability perspective on 3D printing technologies
Gebler, M., Schoot Uiterkamp, A. J. M., & Visser, C. (2014) · Energy Policy · doi:10.1016/j.enpol.2014.08.033 · Cited by 950
Single track formation in selective laser melting of metal powders
Yadroitsev, I., Gusarov, A., Yadroitsava, I., & Smurov, I. (2010) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2010.05.010 · Cited by 827
Huang, R., Riddle, M., Graziano, D., Warren, J., Das, S., Nimbalkar, S., Cresko, J., & Masanet, E. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.04.109 · Cited by 805
Leitão, P., Colombo, A. W., & Karnouskos, S. (2016) · Computers in Industry · doi:10.1016/j.compind.2015.08.004 · Cited by 672
Smart manufacturing must embrace big data
Kusiak, A. (2017) · Nature · doi:10.1038/544023a · Cited by 618
Product-service systems: a literature review on integrated products and services
Beuren, F. H., Gomes Ferreira, M. G., & Cauchick Miguel, P. A. (2013) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2012.12.028 · Cited by 611
Support Structures for Additive Manufacturing: A Review
Jiang, J., Xu, X., & Stringer, J. (2018) · Journal of Manufacturing and Materials Processing · doi:10.3390/jmmp2040064 · Cited by 527
Ren, S., Zhang, Y., Liu, Y., Sakao, T., Huisingh, D., & Almeida, C. M. V. B. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.11.025 · Cited by 525
Self-citationZhang, Y., Ren, S., Liu, Y., & Si, S. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.07.123 · Cited by 512
Self-citationDirect digital manufacturing: definition, evolution, and sustainability implications
Chen, D., Heyer, S., Ibbotson, S., Salonitis, K., Steingrímsson, J. G., & Thiede, S. (2015) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.05.009 · Cited by 498
Influence of process parameters on surface roughness of aluminum parts produced by DMLS
Calignano, F., Manfredi, D., Ambrosio, E. P., Iuliano, L., & Fino, P. (2013) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-012-4688-9 · Cited by 469
A big data approach for logistics trajectory discovery from RFID-enabled production data
Zhong, R. Y., Huang, G. Q., Lan, S., Dai, Q. Y., Chen, X., & Zhang, T. (2015) · International Journal of Production Economics · doi:10.1016/j.ijpe.2015.02.014 · Cited by 464
Big Data Analytics: A Literature Review Paper
Elgendy, N., & Elragal, A. (2014) · Lecture Notes in Computer Science · doi:10.1007/978-3-319-08976-8_16 · Cited by 457
Prediction of surface roughness in extrusion-based additive manufacturing with machine learning
Li, Z., Zhang, Z., Shi, J., & Wu, D. (2019) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2019.01.004 · Cited by 432
Top surface and side roughness of Inconel 625 parts processed using selective laser melting
Mumtaz, K., & Hopkinson, N. (2009) · Rapid Prototyping Journal · doi:10.1108/13552540910943397 · Cited by 429
Sustainability of additive manufacturing: An overview on its energy demand and environmental impact
Peng, T., Kellens, K., Tang, R., Chen, C., & Chen, G. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2018.04.022 · Cited by 426
Self-citationA review of data mining applications for quality improvement in manufacturing industry
Köksal, G., Batmaz, İ., & Testik, M. C. (2011) · Expert Systems with Applications · doi:10.1016/j.eswa.2011.04.063 · Cited by 420
Big Data Analytics for Physical Internet-based intelligent manufacturing shop floors
Zhong, R. Y., Xu, C., Chen, C., & Huang, G. Q. (2017) · International Journal of Production Research · doi:10.1080/00207543.2015.1086037 · Cited by 416
Understanding household energy consumption behavior: The contribution of energy big data analytics
Zhou, K., & Yang, S. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.12.001 · Cited by 398
THE INTERNET OF THINGS: A SURVEY
Atzori, L., Lera, A., & Morabito, G. (2018) · Tạp chí Nghiên cứu dân tộc · doi:10.25073/0866-773x/64 · Cited by 391
Shrouf, F., & Miragliotta, G. (2015) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.03.055 · Cited by 380
Manufacturing big data ecosystem: A systematic literature review
Cui, Y., Kara, S., & Chan, K. C. (2020) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2019.101861 · Cited by 334
Scheduling in cloud manufacturing: state-of-the-art and research challenges
Liu, Y., Wang, L., Wang, X. V., Xu, X. W., & Li, Z. (2018) · International Journal of Production Research · doi:10.1080/00207543.2018.1449978 · Cited by 315
Delgado, J., Ciurana, J., & Rodríguez, C. A. (2012) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-011-3643-5 · Cited by 305
Balling processes during selective laser treatment of powders
Tolochko, N. K., Mozzharov, S. E., Yadroitsev, I. A., Laoui, T., Froyen, L., Titov, V. I., & Ignatiev, M. B. (2004) · Rapid Prototyping Journal · doi:10.1108/13552540410526953 · Cited by 299
Robot assisted additive manufacturing: A review
Urhal, P., Weightman, A., Diver, C., & Bartolo, P. (2019) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2019.05.005 · Cited by 277
Data and knowledge mining with big data towards smart production
Cheng, Y., Chen, K., Sun, H., Zhang, Y., & Tao, F. (2018) · Journal of Industrial Information Integration · doi:10.1016/j.jii.2017.08.001 · Cited by 275
Self-citationBourhis, F. L., Kerbrat, O., Hascoet, J.-Y., & Mognol, P. (2013) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-013-5151-2 · Cited by 269
Wang, D., Liu, Y., Yang, Y., & Xiao, D. (2016) · Rapid Prototyping Journal · doi:10.1108/rpj-06-2015-0078 · Cited by 254
Sustainability Characterization for Additive Manufacturing
Mani, M., Lyons, K. W., & Gupta, S. K. (2014) · Journal of Research of the National Institute of Standards and Technology · doi:10.6028/jres.119.016 · Cited by 250
Torğul, B., Sagbansua, L., & Balo, F. (2016) · International Journal of Applied Mathematics Electronics and Computers · doi:10.18100/ijamec.267197 · Cited by 243
A framework for Big Data driven product lifecycle management
Zhang, Y., Ren, S., Liu, Y., Sakao, T., & Huisingh, D. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.04.172 · Cited by 243
Self-citationAchillas, C., Aidonis, D., Iakovou, E., Thymianidis, M., & Tzetzis, D. (2015) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2014.07.014 · Cited by 229
A big data driven analytical framework for energy-intensive manufacturing industries
Zhang, Y., Ma, S., Yang, H., Lv, J., & Liu, Y. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.06.170 · Cited by 225
Self-citationTao, F., Zuo, Y., Xu, L. D., Lv, L., & Zhang, L. (2014) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2014.2306771 · Cited by 178
Scheduling for sustainable manufacturing: A review
Akbar, M., & Irohara, T. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.09.100 · Cited by 175
Big Data Analysis: Apache Storm Perspective
SZABIST, Hussain Iqbal, M., & Rahim Soomro, T. (2015) · International Journal of Computer Trends and Technology · doi:10.14445/22312803/ijctt-v19p103 · Cited by 169
CPS-Based Self-Adaptive Collaborative Control for Smart Production-Logistics Systems
Guo, Z., Zhang, Y., Zhao, X., & Song, X. (2020) · IEEE Transactions on Cybernetics · doi:10.1109/tcyb.2020.2964301 · Cited by 157
Self-citationLiu, B., Zhang, Y., Zhang, G., & Zheng, P. (2019) · Advanced Engineering Informatics · doi:10.1016/j.aei.2019.100984 · Cited by 155
Self-citationEnvironmental impacts of rapid prototyping: an overview of research to date
Drizo, A., & Pegna, J. (2006) · Rapid Prototyping Journal · doi:10.1108/13552540610652393 · Cited by 142
Hierarchical design principles of selective laser melting for high quality metallic objects
Yadroitsev, I. A., Krakhmalev, P., & Yadroitsava, I. (2014) · Additive manufacturing · doi:10.1016/j.addma.2014.12.007 · Cited by 142
Jiang, J., Hu, G., Li, X., Xu, X. W., Zheng, P., & Stringer, J. (2019) · Virtual and Physical Prototyping · doi:10.1080/17452759.2019.1576010 · Cited by 141
A proactive material handling method for CPS enabled shop-floor
Wang, W., Zhang, Y., & Zhong, R. Y. (2019) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2019.101849 · Cited by 135
Self-citationMourtzis, D. (2016) · Logistics Research · doi:10.1007/s12159-015-0129-0 · Cited by 123
Jiang, J., Stringer, J., Xu, X. W., & Zhong, R. Y. (2018) · International Journal of Computer Integrated Manufacturing · doi:10.1080/0951192x.2018.1466398 · Cited by 120
Analyzing environmental sustainability methods for use earlier in the product lifecycle
Brundage, M. P., Bernstein, W. Z., Hoffenson, S., Chang, Q., Nishi, H., Kliks, T., & Morris, K. C. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.03.187 · Cited by 107
Modelling for randomly oriented multi material additive manufacturing component and its fabrication
Sugavaneswaran, M., & Arumaikkannu, G. (2013) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2013.08.102 · Cited by 106
Direct manufacturing of 3D objects by selective laser melting of metal powders
Yadroitsau, I. (2008) · OpenGrey (Institut de l'Information Scientifique et Technique) · Cited by 102
A framework for big data driven process analysis and optimization for additive manufacturing
Majeed, A., Lv, J., & Peng, T. (2018) · Rapid Prototyping Journal · doi:10.1108/rpj-04-2017-0075 · Cited by 102
Self-citationQian, C., Zhang, Y., Jiang, C., Pan, S., & Rong, Y. K. (2019) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2019.101841 · Cited by 101
Self-citationWits, W. W., García, J. R. R., & Becker, J. M. J. (2016) · Procedia CIRP · doi:10.1016/j.procir.2016.01.156 · Cited by 100
Lee, J., Cha, H. D., Shim, J., Jung, J. W., Kim, J. Y., & Cho, D. (2012) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.34149 · Cited by 98
5G: rethink mobile communications for 2020+
Chih‐Lin, I., Han, S., Xu, Z., Sun, Q. L., & Pan, Z. (2016) · Philosophical Transactions of the Royal Society A Mathematical Physical and Engineering Sciences · doi:10.1098/rsta.2014.0432 · Cited by 82
Assessing sustainability benefits of cybermanufacturing systems
Song, Z., & Moon, Y. B. (2016) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-016-9428-0 · Cited by 77
Jawahir, I. S., Rouch, K. E., Dillon, O. W., Holloway, L. A., & Hall, A. (2007) · International journal of engineering education · Cited by 67
An augmented Lagrangian coordination method for optimal allocation of cloud manufacturing services
Zhang, G., Zhang, Y., Xu, X. W., & Zhong, R. Y. (2017) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2017.11.008 · Cited by 57
Self-citationBig Data-Driven Manufacturing—Process-Monitoring-for-Quality Philosophy
Abell, J. A., Chakraborty, D., Escobar, C. A., Im, K. H., Wegner, D. M., & Wincek, M. A. (2017) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4036833 · Cited by 52
Tao, F., Tang, Y. P., Zou, X., & Qi, Q. (2018) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2018.12.005 · Cited by 35
Cited by
Industry 5.0: A survey on enabling technologies and potential applications
Maddikunta, P. K. R., Pham, Q.-V., B, P., Deepa, N., Dev, K., Gadekallu, T. R., Ruby, R., & Liyanage, M. (2022) · Journal of Industrial Information Integration · doi:10.1016/j.jii.2021.100257 · Cited by 1,890
Material-structure-performance integrated laser-metal additive manufacturing
Gu, D., Shi, X., Poprawe, R., Bourell, D. L., Setchi, R., & Zhu, J. (2021) · Science · doi:10.1126/science.abg1487 · Cited by 1,703
Mourtzis, D., Angelopoulos, J., & Panopoulos, N. (2022) · Energies · doi:10.3390/en15176276 · Cited by 525
Role of additive manufacturing applications towards environmental sustainability
Javaid, M., Haleem, A., Singh, R. P., Suman, R., & Rab, S. (2021) · Advanced Industrial and Engineering Polymer Research · doi:10.1016/j.aiepr.2021.07.005 · Cited by 419
Tseng, M.-L., Tran, T. P. T., Ha, H. M., Bui, T.-D., & Lim, M. K. (2021) · Journal of Industrial and Production Engineering · doi:10.1080/21681015.2021.1950227 · Cited by 341
Metadata
- Authors
- Majeed, A., Zhang, Y., Ren, S., Lv, J., Peng, T., Waqar, S., & Yin, E.
- Venue
- Robotics and Computer-Integrated Manufacturing
- Publisher
- Elsevier BV
- Published
- 2021-02
- Volume
- 67
- Pages
- 102026
- ISSN
- 0736-5845 (ISSN-L)
- OpenAlex
- W3045571868
- Cited by
- 313
- References
- 64
- FWCI
- 15.88
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.