The DOI matches its Crossref record; 66 of the 66 references it cites were found in a registry or an index.
Mainstreaming commercial CSP systems: A technology review
Open accessAbstract
In this review, we summarise the current status and new trends in concentrating solar power (CSP) technology, analysing the technology cost and their evolution during the last years, with special focus on thermal storage. Moreover, we have carried out a comprehensive review of the molten salts used and proposed in CSP commercial plants. Nitrates, nitrites, chlorides, and carbonates are presented, including their corrosion aspects with common alloys as well as the different possibilities available in the literature to replace them (ternary and quaternary nitrate molten salt) or improve them (addition of nanoparticles). Finally, we have proposed the key factors for a successful new generation of CSP plants, with special focus on high-temperature molten salts (carbonates and chloride blends) and the main important materials requirements for CSP system components.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Convective Transport in Nanofluids
Buongiorno, J. (2006) · Journal of Heat Transfer · doi:10.1115/1.2150834 · Cited by 7,013
Gil, A., Medrano, M., Martorell, I., Lázaro, A., Dolado, P., Zalba, B., & Cabeza, L. F. (2010) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2009.07.035 · Cited by 1,762
Self-citationJohansen, O. (1977) · doi:10.21236/ada044002 · Cited by 1,077
Heat transfer fluids for concentrating solar power systems – A review
Vignarooban, K., Xu, X., Arvay, A., Hsu, K., & Kannan, A. M. (2015) · Applied Energy · doi:10.1016/j.apenergy.2015.01.125 · Cited by 977
Liu, M., Steven Tay, N. H., Bell, S., Belusko, M., Jacob, R., Will, G., Saman, W., & Bruno, F. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.09.026 · Cited by 928
Thermal energy storage systems for concentrated solar power plants
Pelay, U., Luo, L., Fan, Y., Stitou, D., & Rood, M. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.03.139 · Cited by 768
Concentrating Solar Power Gen3 Demonstration Roadmap
National Renewable Energy Lab. (NREL), G., Mehos, M., Solar Energy Technologies Office (EE-4S) USDOE Office of Energy Efficiency and Renewable Energy (EERE), et al. (2017) · doi:10.2172/1338899 · Cited by 753
González-Roubaud, E., Pérez-Osorio, D., & Prieto, C. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.05.084 · Cited by 578
Shin, D., & Banerjee, D. (2011) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2010.11.017 · Cited by 534
Thermodynamic properties in SI
Reynolds, W. C. (1979) · Cited by 482
Garg, H. P., Mullick, S. C., & Bhargava, A. K. (1985) · Springer eBooks · doi:10.1007/978-94-009-5301-7 · Cited by 426
Chieruzzi, M., Cerritelli, G. F., Miliozzi, A., & Kenny, J. M. (2013) · Nanoscale Research Letters · doi:10.1186/1556-276x-8-448 · Cited by 381
Brockner, W., Ehrhardt, C., & Gjikaj, M. (2007) · Thermochimica Acta · doi:10.1016/j.tca.2007.01.031 · Cited by 376
High temperature corrosion in energy systems
Rapp, R. A., Devan, J. H., Douglass, D. L., Nordine, P. C., Pettit, F. S., & Whittle, D. P. (1981) · Materials Science and Engineering · doi:10.1016/0025-5416(81)90082-3 · Cited by 366
Material aspects of Solar Salt for sensible heat storage
Bauer, T., Pfleger, N. A., Breidenbach, N., Eck, M., Laing, D., & Kaesche, S. (2013) · Applied Energy · doi:10.1016/j.apenergy.2013.04.072 · Cited by 336
Thermal energy storage using chloride salts and their eutectics
Myers, P. D., & Goswami, D. Y. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.07.046 · Cited by 297
Enhanced specific heat capacity of high-temperature molten salt-based nanofluids
Tiznobaik, H., & Shin, D. (2013) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2012.10.062 · Cited by 279
Dudda, B., & Shin, D. (2013) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2013.02.003 · Cited by 251
Ding, W., Shi, H., Xiu, Y., Bonk, A., Weisenburger, A., Jianu, A., & Bauer, T. (2018) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2018.04.025 · Cited by 245
Corrosion of alloys in a chloride molten salt (NaCl-LiCl) for solar thermal technologies
Gomez-Vidal, J. C., & Tirawat, R. (2016) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2016.05.052 · Cited by 240
Self-citationHo, M. X., & Pan, C. (2014) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2013.10.078 · Cited by 235
Solé, A., Miró, L., Barreneche, C., Martorell, I., & Cabeza, L. F. (2013) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2013.05.066 · Cited by 209
Self-citationOlivares, R. I. (2012) · Solar Energy · doi:10.1016/j.solener.2012.05.025 · Cited by 201
The preparation and properties of multi-component molten salts
Peng, Q., Ding, J., Wei, X., Yang, J., & Yang, X. (2010) · Applied Energy · doi:10.1016/j.apenergy.2009.06.022 · Cited by 199
Liu, B., Wei, X., Wang, W., Lu, J., & Ding, J. (2017) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2017.05.050 · Cited by 198
Development of Molten Salt Heat Transfer Fluid With Low Melting Point and High Thermal Stability
Raade, J. W., & Padowitz, D. (2011) · Journal of Solar Energy Engineering · doi:10.1115/1.4004243 · Cited by 195
Nitrate salts doped with CuO nanoparticles for thermal energy storage with improved heat transfer
Myers, P. D., Alam, T. E., Kamal, R., Goswami, D. Y., & Stefanakos, E. (2016) · Applied Energy · doi:10.1016/j.apenergy.2015.11.045 · Cited by 192
Increment of specific heat capacity of solar salt with SiO2 nanoparticles
Andreu-Cabedo, P., Mondragon, R., Hernandez, L., Martinez-Cuenca, R., Cabedo, L., & Julia, J. E. (2014) · Nanoscale Research Letters · doi:10.1186/1556-276x-9-582 · Cited by 190
Corrosion behaviour of various model alloys with NaCl–KCl coating
Li, Y. S., Spiegel, M., & Shimada, S. (2005) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2005.03.015 · Cited by 181
Vignarooban, K., Pugazhendhi, P., Tucker, C., et al. (2014) · Solar Energy · doi:10.1016/j.solener.2014.02.002 · Cited by 179
Ishitsuka, T., & Nose, K. (2002) · Corrosion Science · doi:10.1016/s0010-938x(01)00059-2 · Cited by 177
Novel low melting point quaternary eutectic system for solar thermal energy storage
Wang, T., Mantha, D., & Reddy, R. G. (2012) · Applied Energy · doi:10.1016/j.apenergy.2012.09.001 · Cited by 168
Review on the methodology used in thermal stability characterization of phase change materials
Ferrer, G., Solé, A., Barreneche, C., Martorell, I., & Cabeza, L. F. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.04.187 · Cited by 160
Self-citationLiu, S., Liu, Z., Wang, Y., & Tang, J. J. (2014) · Corrosion Science · doi:10.1016/j.corsci.2014.03.012 · Cited by 160
Olivares, R. I., Chen, C., & Wright, S. C. (2012) · Journal of Solar Energy Engineering · doi:10.1115/1.4006895 · Cited by 160
Preparation and thermal properties of quaternary mixed nitrate with low melting point
Ren, N., Wu, Y., Ma, C., & Sang, L. (2014) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2014.03.056 · Cited by 138
Specific heat capacity of molten salt-based alumina nanofluid
Lu, M., & Huang, C.-H. (2013) · Nanoscale Research Letters · doi:10.1186/1556-276x-8-292 · Cited by 133
Chieruzzi, M., Cerritelli, G. F., Miliozzi, A., Kenny, J. M., & Torre, L. (2017) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2017.04.011 · Cited by 131
Ferrer, G., Barreneche, C., Solé, A., Martorell, I., & Cabeza, L. F. (2017) · Journal of Energy Storage · doi:10.1016/j.est.2017.02.002 · Cited by 130
Self-citationSpecific heat control of nanofluids: A critical review
Riazi, H., Murphy, T., Webber, G. B., Atkin, R., Tehrani, S. S. M., & Taylor, R. A. (2016) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2016.03.024 · Cited by 127
Vidal, J., Fernández, Á. G., Tirawat, R., Turchi, C. S., & Huddleston, W. (2017) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2017.02.019 · Cited by 122
On the specific heat capacity enhancement in nanofluids
Hentschke, R. (2016) · Nanoscale Research Letters · doi:10.1186/s11671-015-1188-5 · Cited by 120
System value and progress of CSP
Gauché, P., Rudman, J., Mabaso, M., Landman, W. A., von Backström, T. W., & Brent, A. C. (2017) · Solar Energy · doi:10.1016/j.solener.2017.03.072 · Cited by 113
Olivares, R. I., & Edwards, W. (2013) · Thermochimica Acta · doi:10.1016/j.tca.2013.02.029 · Cited by 106
Thermal energy storage enhancement of a binary molten salt via in-situ produced nanoparticles
Luo, Y., Du, X., Awad, A. T., & Wen, D. (2016) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2016.09.004 · Cited by 106
Wang, J., Zhang, C.-Z., Li, Z.-H., Zhou, H., He, J., & Yu, J.-C. (2017) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2017.02.020 · Cited by 106
Gomez, J. C., Calvet, N., Starace, A. K., & Glatzmaier, G. C. (2013) · Journal of Solar Energy Engineering · doi:10.1115/1.4023182 · Cited by 104
Thermal conductivity of high temperature fluoride molten salt determined by laser flash technique
An, X.-H., Cheng, J., Yin, H., Xie, L., & Zhang, P. (2015) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2015.07.042 · Cited by 100
Corrosion Mechanisms in Chloride and Carbonate Salts
(NNSA), U. N. N. S. A., Kruizenga, A., & Sandia National Lab. (SNL-CA), L. (2012) · doi:10.2172/1051732 · Cited by 100
Self-citationVidal, J., Fernández, Á. G., Tirawat, R., Turchi, C. S., & Huddleston, W. (2017) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2017.03.025 · Cited by 88
Electrochemical measurement of corrosive impurities in molten chlorides for thermal energy storage
Ding, W., Bonk, A., Gussone, J., et al. (2018) · Journal of Energy Storage · doi:10.1016/j.est.2017.12.007 · Cited by 82
Vidal, J., Noel, J., & Weber, J. (2016) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2016.07.029 · Cited by 76
Madathil, P. K., Nagaraj, B., Saha, P., Bharali, J., Rao, P. V. C., Choudary, N. V., & Ramesh, K. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.04.102 · Cited by 70
Fernández, Á. G., & Pérez, F. J. (2016) · Solar Energy · doi:10.1016/j.solener.2016.05.030 · Cited by 70
An, X., Cheng, J., Zhang, P., Tang, Z., & Wang, J. (2016) · Faraday Discussions · doi:10.1039/c5fd00236b · Cited by 69
Grosu, Y. G., Bondarchuk, O. B., & Faik, A. (2017) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2017.08.026 · Cited by 65
Nissen, D. A. (1982) · Journal of Chemical & Engineering Data · doi:10.1021/je00029a012 · Cited by 57
Corrosion of Alloys and Metals by Molten Nitrates
Sandia National Laboratories (SNL-CA), L., Bradshaw, R., Administration, U. A. S. F. H. R. A., et al. (2001) · doi:10.2172/1545803 · Cited by 48
Effect of the impurity magnesium nitrate in the thermal decomposition of the solar salt
Prieto, C., Ruiz-Cabañas, F. J., Rodríguez-Sánchez, A., Abujas, C. R., Fernández, A. I., Martínez, M., Oró, E., & Cabeza, L. F. (2018) · Solar Energy · doi:10.1016/j.solener.2018.08.046 · Cited by 41
Self-citationCastable cements to prevent corrosion of metals in molten salts
Vidal, J., & Morton, E. (2016) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2016.04.009 · Cited by 37
Fernández, Á. G., & Vidal, J. (2016) · Renewable Energy · doi:10.1016/j.renene.2016.08.052 · Cited by 36
Janz, G. J., & Truong, G. N. (1983) · Journal of Chemical & Engineering Data · doi:10.1021/je00032a022 · Cited by 33
Thermal analysis of molten ternary lithium-sodium-potassium nitrates
Mohammad, M. B., Brooks, G. A., & Rhamdhani, M. A. (2016) · Renewable Energy · doi:10.1016/j.renene.2016.12.015 · Cited by 31
Multidimensional Modeling of Nickel Alloy Corrosion inside High Temperature Molten Salt Systems
Mehrabadi, B. A. T., Weidner, J. W., Garcia-Diaz, B. L., et al. (2016) · Journal of The Electrochemical Society · doi:10.1149/2.0411614jes · Cited by 28
Malik, D. R. (2010) · OakTrust (Texas A&M University Libraries) · Cited by 27
Devaradjane, R. (2013) · UTA ResearchCommons (University of Texas Arlington) · Cited by 9
Cited by
Bag, S., Yadav, G., Dhamija, P., & Kataria, K. K. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.125233 · Cited by 442
Ding, W., & Bauer, T. (2021) · Engineering · doi:10.1016/j.eng.2020.06.027 · Cited by 348
Corrosion behaviour of 316 stainless steel in NaCl-KCl-MgCl2 salt vapour at 700°C
Liu, Q., Xu, H., Yin, H., Li, N., Wang, W., Li, L., Tang, Z., & Qian, Y. (2022) · Corrosion Science · doi:10.1016/j.corsci.2021.109921 · Cited by 50
Metadata
- Authors
- Fernández, A. G., Gomez-Vidal, J., Oró, E., Kruizenga, A., Solé, A., & Cabeza, L. F.
- Venue
- Renewable Energy
- Publisher
- Elsevier BV
- Published
- 2019-09
- Volume
- 140
- Pages
- 152-176
- ISSN
- 0960-1481 (ISSN-L)
- OpenAlex
- W2922383960
- Cited by
- 311
- References
- 66
- FWCI
- 7.58
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.