Enhanced properties of diatomite-based composite phase change materials for thermal energy storage
The DOI matches its Crossref record; 7 of the 7 references it cites were found in a registry or an index.
Abstract
Abstract Diatomite-based composite phase change materials (PCMs) with enhanced properties were prepared by vacuum impregnation method for thermal energy storage. Diatomite is used as a supporting matrix in composite PCMs due to its natural high porosity and relatively low price. Particularly, diatomite after microwave-acid treatment (Dm) with higher loading capability compared to raw diatomite was used as a supporting matrix to stabilize lauric acid-stearic acid (LA-SA). To improve the thermal conductivity of the composite PCMs, expanded graphite (EG) was introduced as a support matrix together with Dm at a weight ratio of 1:10 of EG to Dm. FTIR and XRD analysis indicated that the crystal structure of diatomite was not affected by the microwave-acid treatment and addition of EG, and no chemical reaction occurred between LA-SA and supports during impregnation. Devised LA-SA/Dm/EG with 72.2% loadage of LA-SA and a phase change temperature of 31.17 °C had latent heat value of 117.30 J g−1 for melting and 114.50 J g−1 for freezing, respectively. The thermal conductivity of LA-SA/Dm/EG was up to 3.2 times that of LA-SA/Dm. The thermal infrared images presented that the transient temperature response of LA-SA/Dm was enhanced after introducing of 2.5 wt% EG. Therefore, the prepared composite phase change material is a potential candidate for thermal energy storage in the indoor thermal comfort system, especially the building envelope.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Qureshi, Z. A., Ali, H. M., & Khushnood, S. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.08.049 · Cited by 697
Tauseef-ur-Rehman, Ali, H. M., Janjua, M. M., Sajjad, U., & Yan, W.-M. (2019) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2019.02.001 · Cited by 507
Latent Heat Thermal Energy Storage Systems with Solid–Liquid Phase Change Materials: A Review
Zhang, N., Yuan, Y., Cao, X., Du, Y., Zhang, Z., & Gui, Y. (2018) · Advanced Engineering Materials · doi:10.1002/adem.201700753 · Cited by 504
Thermal conductivity enhancement of phase change materials for thermal energy storage: A review
Liu, L., Su, D., Tang, Y., & Fang, G. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.04.057 · Cited by 410
Qian, T., Li, J., Min, X., Guan, W., Deng, Y., & Ning, L. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta00309a · Cited by 372
Review on micro/nano phase change materials for solar thermal applications
Qiu, L., Ouyang, Y., Feng, Y., & Zhang, X. (2019) · Renewable Energy · doi:10.1016/j.renene.2019.03.088 · Cited by 255
Zhang, X., Wen, R., Huang, Z., Tang, C., Huang, Y., Liu, Y., Fang, M., Wu, X., Min, X., & Xu, Y. (2017) · Energy and Buildings · doi:10.1016/j.enbuild.2017.05.037 · Cited by 189
Cited by
A review of melting and freezing processes of PCM/nano-PCM and their application in energy storage
Rostami, S., Afrand, M., Shahsavar, A., Sheikholeslami, M., Kalbasi, R., Aghakhani, S., Shadloo, M. S., & Oztop, H. F. (2020) · Energy · doi:10.1016/j.energy.2020.118698 · Cited by 444
Rathore, P. K. S., & Shukla, S. K. (2021) · Energy and Buildings · doi:10.1016/j.enbuild.2021.110799 · Cited by 344
Peng, K., Chen, H., Ye, J., Guo, X., Ran, Y., Su, L., Niu, M., Lu, D., & Wang, H. (2025) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5c03863 · Cited by 12
Metadata
- Authors
- Li, C., Wang, M., Xie, B., Ma, H., & Chen, J.
- Venue
- Renewable Energy
- Publisher
- Elsevier BV
- Published
- 2020-03
- Volume
- 147
- Pages
- 265-274
- ISSN
- 0960-1481 (ISSN-L)
- OpenAlex
- W2972158728
- Cited by
- 185
- References
- 7
- FWCI
- 14.10
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.