The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
An experimental evaluation of thermal behavior of the building envelope using macroencapsulated PCM for energy savings
Abstract
There is a very significant rise in energy demand of the building sector in developing countries. A major portion of this energy is used for space cooling and heating in buildings. Due to the concern of global warming, energy-efficient solution in buildings is the need of the hour. Increasing the thermal energy storage capacity of the building by using Phase Change Material (PCM) is an innovative technique to reduce the energy demand. This paper evaluates the thermal response of the building envelope integrated with macroencapsulated PCM under real tropical environment. The indoor thermal profile of both the cubicles in terms of peak temperature, time lag, and thermal amplitude was studied. The reduction in cooling load and energy saving in terms of cost/kWh of electricity was also evaluated. The thermography images of both the cubicles were also analyzed to find out the thermal response of the cubicles towards macro-encapsulation. The results show 40.67%–59.79% reduction in thermal amplitude, including 7.19%–9.18% fall in peak temperature of all the walls, the roof and indoor ambient of experimental cubical. Additionally, 60–120 min of time delay along with 38.76% of reduction in cooling load of the experimental cubicle was achieved.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Review on thermal energy storage with phase change materials (PCMs) in building applications
Zhou, D., Zhao, C. Y., & Tian, Y. (2012) · Applied Energy · doi:10.1016/j.apenergy.2011.08.025 · Cited by 1,896
Review of thermal energy storage technologies based on PCM application in buildings
Pomianowski, M., Heiselberg, P., & Zhang, Y. (2013) · Energy and Buildings · doi:10.1016/j.enbuild.2013.08.006 · Cited by 474
Potential of macroencapsulated PCM for thermal energy storage in buildings : a comprehensive review
Rathore, P. K. S., & Shukla, S. K. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.07.221 · Cited by 396
Self-citation
Cited by
Latent thermal energy storage technologies and applications: A review
Jouhara, H., Żabnieńska-Góra, A., Khordehgah, N., Ahmad, D., & Lipinski, T. (2020) · International Journal of Thermofluids · doi:10.1016/j.ijft.2020.100039 · Cited by 543
“Ram at all in [55], which studies pumpable cement concrete with nanomaterials embedded phase change material (PCN-PCM).”
BackgroundWang, X., Li, W., Luo, Z., Wang, K., & Shah, S. P. (2022) · Energy and Buildings · doi:10.1016/j.enbuild.2022.111923 · Cited by 493
Al-Yasiri, Q., & Szabó, M. (2021) · Journal of Building Engineering · doi:10.1016/j.jobe.2020.102122 · Cited by 432
Rathore, P. K. S., & Shukla, S. K. (2021) · Energy and Buildings · doi:10.1016/j.enbuild.2021.110799 · Cited by 344
Self-citationNakhchi, M. E., Hatami, M., & Rahmati, M. (2021) · Energy · doi:10.1016/j.energy.2020.119112 · Cited by 78
Metadata
- Authors
- Rathore, P. K. S., & Shukla, S. K.
- Venue
- Renewable Energy
- Publisher
- Elsevier BV
- Published
- 2020-04
- Volume
- 149
- Pages
- 1300-1313
- ISSN
- 0960-1481 (ISSN-L)
- OpenAlex
- W2982006570
- Cited by
- 212
- References
- 3
- FWCI
- 13.26
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: An experimental evaluation of thermal behavior of the building envelope using macroencapsulated PCM for energy savings. https://app.cochat.ai/papers/10.1016/j.renene.2019.10.130
- The paper
- Rathore, P. K. S., & Shukla, S. K. (2020). An experimental evaluation of thermal behavior of the building envelope using macroencapsulated PCM for energy savings. Renewable Energy. https://doi.org/10.1016/j.renene.2019.10.130
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.