The DOI matches its Crossref record; 27 of the 27 references it cites were found in a registry or an index.
A critical review on recycling of end-of-life carbon fibre/glass fibre reinforced composites waste using pyrolysis towards a circular economy
Open accessAbstract
The rapid utilization of carbon fibre reinforced composite (CFRC) and glass fibre reinforced composite (GFRC) in main sectors, such as automobile, aerospace, wind turbines, boats and sport parts, has gained much attention because of its high strength, light weight and impressive mechanical properties. Currently, the increasing amount and handling of composite waste at their end-of-life (EoL) has a negative impact on resources conservation and the environment. Pyrolysis, a two-step process, appeared as most viable process to recover not only valuable materials but also produce fuel and chemicals. However, the testing facilities and optimized operation of composite waste in pyrolysis processes to produce materials with low energy consumption and acceptable mechanical properties are still under development and discussion before commercialization. The aim of this article is to review the studies on CFRC/GFRC recycling via pyrolysis processes and highlight their technical challenges and re-use possibilities in high performance composites. The forthcoming commercialization challenges and respective market potential to recyclates using the pyrolysis process will be addressed. This study will also introduce the strong connection between recycling and re-usability of fibres which would help to explain the concept of circular economy and cradle-to-cradle approach. Finally, based on updated studies and critical analysis, research gaps in the recycling treatments of fibrous composite waste using pyrolysis processes are discussed with recommendations.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
IOP Conference Series: Materials Science and Engineering
(2022) · IOP Conference Series: Materials Science and Engineering · doi:10.1088/1757-899x/1231/1/011001 · Cited by 10,357
Conceptualizing the circular economy: An analysis of 114 definitions
Kirchherr, J., Reike, D., & Hekkert, M. (2017) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2017.09.005 · Cited by 8,550
Oliveux, G., Dandy, L. O., & Leeke, G. A. (2015) · Progress in Materials Science · doi:10.1016/j.pmatsci.2015.01.004 · Cited by 1,287
Recycling technologies for thermoset composite materials—current status
Pickering, S. J. (2006) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2005.05.030 · Cited by 1,278
Pimenta, S., & Pinho, S. T. (2011) · Waste Management · doi:10.1016/j.wasman.2010.09.019 · Cited by 967
Recycling of composite materials
Yang, Y., Boom, R., Irion, B., van Heerden, D.-J., Kuiper, P., & de Wit, H. (2012) · Chemical Engineering and Processing: Process Intensification · doi:10.1016/j.cep.2011.09.007 · Cited by 853
Carbon Fiber Reinforced Thermoset Composite with Near 100% Recyclability
Yu, K., Shi, Q., Dunn, M. L., Wang, T., & Qi, H. J. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201602056 · Cited by 538
Salvaging building materials in a circular economy: a BIM-based whole-life performance estimator
Akanbi, L. A., Oyedele, L. O., Akinade, O. O., Ajayi, A. O., Davila Delgado, M., Bilal, M., & Bello, S. A. (2018) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2017.10.026 · Cited by 468
Witik, R. A., Teuscher, R., Michaud, V., Ludwig, C., & Månson, J.-A. E. (2013) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2013.02.009 · Cited by 408
Technology readiness level assessment of composites recycling technologies
Rybicka, J., Tiwari, A., & Leeke, G. A. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.08.104 · Cited by 308
Harvesting the unexplored potential of European waste materials for road construction
Poulikakos, L. D., Papadaskalopoulou, C., Hofko, B., Gschösser, F., Cannone Falchetto, A., Bueno, M., Arraigada, M., Sousa, J., Ruiz, R., Petit, C., et al. (2017) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2016.09.008 · Cited by 287
Valorization of packaging plastic waste by slow pyrolysis
Das, P., & Tiwari, P. (2018) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2017.09.025 · Cited by 264
Energy and environmental assessment and reuse of fluidised bed recycled carbon fibres
Meng, F., McKechnie, J., Turner, T. A., & Pickering, S. J. (2017) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2017.05.008 · Cited by 259
Zhong, S., & Pearce, J. M. (2018) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2017.09.023 · Cited by 232
Lefeuvre, A., Garnier, S., Jacquemin, L., Pillain, B., & Sonnemann, G. (2017) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2017.06.023 · Cited by 197
Recycling of carbon fibre reinforced polymeric waste for the production of activated carbon fibres
Nahil, M. A., & Williams, P. T. (2011) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2011.01.005 · Cited by 171
Recovery of carbon fibres by the thermolysis and gasification of waste prepreg
López, F. A., Rodríguez, O., Alguacil, F. J., García-Díaz, I., Centeno, T. A., Fierro, J. L. G., & González, C. (2013) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2013.04.012 · Cited by 166
Potential of biomass for bioenergy in Pakistan based on present case and future perspectives
Naqvi, S. R., Jamshaid, S., Naqvi, M., Farooq, W., Niazi, M. B. K., Aman, Z., Zubair, M., Ali, M., Shahbaz, M., Inayat, A., et al. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.08.012 · Cited by 163
Self-citationRibeiro, M. C. S., Castro, A. C. M., Silva, F. J. G., Santos, J. D., Meixedo, J. P., Fiúza, A., Dinis, M. D. L., & Alvim, M. R. (2013) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2013.10.001 · Cited by 155
Liu, Y., Farnsworth, M., & Tiwari, A. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.08.038 · Cited by 133
Holgersson, S., Steenari, B., Björkman, M., & Cullbrand, K. (2017) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2017.02.011 · Cited by 126
A case study on topology optimized design for additive manufacturing
Gebisa, A. W., & Lemu, H. G. (2017) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/276/1/012026 · Cited by 116
Das, M., & Varughese, S. (2016) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.5b01497 · Cited by 114
Torrefied biomass as feed for fast pyrolysis: An experimental study and chain analysis
Louwes, A. C., Basile, L., Yukananto, R., Bhagwandas, J. C., Bramer, E. A., & Brem, G. (2017) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2017.06.009 · Cited by 97
Self-citationThermoset composite recycling – Driving forces, development, and evolution of new opportunities
OVERCASH, M. R., Twomey, J. M., Asmatulu, E., Vozzola, E., & Griffing, E. (2017) · Journal of Composite Materials · doi:10.1177/0021998317720000 · Cited by 91
Resourceful recycling process of waste desktop computers: A review study
Razi, K. M. H. A. (2016) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2016.03.017 · Cited by 76
A Hotelling model for the circular economy including recycling, substitution and waste accumulation
Hoogmartens, R., Eyckmans, J., & Passel, S. V. (2017) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2017.09.015 · Cited by 32
Cited by
Current status of carbon fibre and carbon fibre composites recycling
Zhang, J., Chevali, V. S., Wang, H., & Wang, C.-H. (2020) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2020.108053 · Cited by 866
Rani, M., Choudhary, P., Krishnan, V., & Zafar, S. (2021) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2021.108768 · Cited by 521
Composite Material Recycling Technology—State-of-the-Art and Sustainable Development for the 2020s
Krauklis, A. E., Karl, C. W., Gagani, A. I., & Jørgensen, J. K. (2021) · Journal of Composites Science · doi:10.3390/jcs5010028 · Cited by 477
Das, T. K., Ghosh, P., & Das, N. C. (2019) · Advanced Composites and Hybrid Materials · doi:10.1007/s42114-018-0072-z · Cited by 469
A Review on the Potential and Limitations of Recyclable Thermosets for Structural Applications
Post, W., Susa, A., Blaauw, R., Molenveld, K., & Knoop, R. J. I. (2020) · Polymer Reviews · doi:10.1080/15583724.2019.1673406 · Cited by 460
Metadata
- Authors
- Naqvi, S. R., Prabhakara, H. M., Bramer, E. A., Dierkes, W., Akkerman, R., & Brem, G.
- Venue
- Resources, Conservation and Recycling
- Publisher
- Elsevier BV
- Published
- 2018-09
- Volume
- 136
- Pages
- 118-129
- ISSN
- 0921-3449 (ISSN-L)
- OpenAlex
- W2800194377
- Cited by
- 484
- References
- 27
- FWCI
- 18.07
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.