The DOI matches its Crossref record; 38 of the 38 references it cites were found in a registry or an index.
LCA of plastic waste recovery into recycled materials, energy and fuels in Singapore
Abstract
In Singapore, 822,200 tonnes of plastic waste was generated in 2016, with only 7% recycled. Due to the complex nature of plastic waste mixtures, mechanical recycling is often inefficient, leading to a majority of waste being incinerated. In this article, alternative solutions are introduced to address the waste problem, such as recovering valuable fuels from plastics via thermochemical methods. Life cycle assessment (LCA) was adopted to investigate 8 scenarios of plastic waste management options. In a nation with land scarcity, the scales and sizes of each plastic waste recycling/recovery method is also taken into consideration. The results demonstrated how different combinations of four plastics valorization technologies, and associated capacities, affected the potential environmental benefits and drawbacks of plastic waste treatment systems. In order to enable selecting the best option among the 8 scenarios, normalization and weighting was carried out.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
ReCiPe2016: a harmonised life cycle impact assessment method at midpoint and endpoint level
Huijbregts, M. A. J., Steinmann, Z. J. N., Elshout, P. M. F., Stam, G., Verones, F., Vieira, M., Zijp, M., Hollander, A., & van Zelm, R. (2017) · The International Journal of Life Cycle Assessment · doi:10.1007/s11367-016-1246-y · Cited by 4,485
A review on pyrolysis of plastic wastes
Anuar Sharuddin, S. D., Abnisa, F., Wan Daud, W. M. A., & Aroua, M. K. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.02.037 · Cited by 2,126
A review on thermal and catalytic pyrolysis of plastic solid waste (PSW)
Al-Salem, S. M., Antelava, A., Constantinou, A., Manos, G., & Dutta, A. (2017) · Journal of Environmental Management · doi:10.1016/j.jenvman.2017.03.084 · Cited by 1,200
Methods for polyurethane and polyurethane composites, recycling and recovery: A review
Zia, K. M., Bhatti, H. N., & Ahmad Bhatti, I. (2007) · Reactive and Functional Polymers · doi:10.1016/j.reactfunctpolym.2007.05.004 · Cited by 786
Review of LCA studies of solid waste management systems – Part I: Lessons learned and perspectives
Laurent, A., Bakas, I., Clavreul, J., Bernstad, A., Niero, M., Gentil, E., Hauschild, M. Z., & Christensen, T. H. (2014) · Waste Management · doi:10.1016/j.wasman.2013.10.045 · Cited by 744
Current state and future prospects of plastic waste as source of fuel: A review
Wong, S. L., Ngadi, N., Abdullah, T. A. T., & Inuwa, I. M. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.04.063 · Cited by 695
Kunwar, B., Cheng, H. N., Chandrashekaran, S. R., & Sharma, B. K. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.10.015 · Cited by 639
Integrated Solid Waste Management: A Lifecycle Inventory
White, P., Franke, M., & Hindle, P. (1995) · Springer eBooks · doi:10.1007/978-1-4684-6705-5 · Cited by 581
Laurent, A., Clavreul, J., Bernstad, A., Bakas, I., Niero, M., Gentil, E., Christensen, T. H., & Hauschild, M. Z. (2014) · Waste Management · doi:10.1016/j.wasman.2013.12.004 · Cited by 451
Quantifying uncertainty in LCA-modelling of waste management systems
Clavreul, J., Guyonnet, D., & Christensen, T. H. (2012) · Waste Management · doi:10.1016/j.wasman.2012.07.008 · Cited by 358
Perugini, F., Mastellone, M. L., & Arena, U. (2005) · Environmental Progress · doi:10.1002/ep.10078 · Cited by 347
Waste Gasification by Thermal Plasma: A Review
Fabry, F., Rehmet, C., Rohani, V., & Fulcheri, L. (2013) · Waste and Biomass Valorization · doi:10.1007/s12649-013-9201-7 · Cited by 297
Food waste conversion options in Singapore: Environmental impacts based on an LCA perspective
Khoo, H. H., Lim, T. Z., & Tan, R. B. H. (2010) · Science of The Total Environment · doi:10.1016/j.scitotenv.2009.10.072 · Cited by 282
Self-citationButler, E., Devlin, G., & McDonnell, K. (2011) · Waste and Biomass Valorization · doi:10.1007/s12649-011-9067-5 · Cited by 270
Valorization of packaging plastic waste by slow pyrolysis
Das, P., & Tiwari, P. (2018) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2017.09.025 · Cited by 264
Environmental evaluation of plastic waste management scenarios
Rigamonti, L., Grosso, M., Møller, J., Martinez Sanchez, V., Magnani, S., & Christensen, T. H. (2014) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2013.12.012 · Cited by 247
Astrup, T., Møller, J., & Fruergaard, T. (2009) · Waste Management & Research: The Journal for a Sustainable Circular Economy · doi:10.1177/0734242x09343774 · Cited by 243
Environmental performance of household waste management in Europe - An example of 7 countries
Bassi, S. A., Christensen, T. H., & Damgaard, A. (2017) · Waste Management · doi:10.1016/j.wasman.2017.07.042 · Cited by 169
Ahlroth, S., Nilsson, M., Finnveden, G., Hjelm, O., & Hochschorner, E. (2010) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2010.04.016 · Cited by 163
A framework for evaluating Singapore’s energy security
Ang, B. W., Choong, W. L., & Ng, T. S. (2015) · Applied Energy · doi:10.1016/j.apenergy.2015.03.088 · Cited by 129
Bias in normalization: Causes, consequences, detection and remedies
Heijungs, R., Guinée, J. B., Kleijn, R., & Rovers, V. (2006) · The International Journal of Life Cycle Assessment · doi:10.1065/lca2006.07.260 · Cited by 128
Gear, M., Sadhukhan, J., Thorpe, R. B., Clift, R., SEVILLE, J. P. K., & Keast, M. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.01.015 · Cited by 126
Chen, X., Xi, F., Geng, Y., & Fujita, T. (2010) · Waste Management · doi:10.1016/j.wasman.2010.08.010 · Cited by 103
Integrated Solid Waste Management: A Life Cycle Inventory
Savage, G. M. (2002) · Waste Management · doi:10.1016/s0956-053x(02)00032-6 · Cited by 101
Blengini, G. A., Fantoni, M., Busto, M., Genon, G., & Zanetti, M. (2012) · Waste Management · doi:10.1016/j.wasman.2012.04.010 · Cited by 88
Gasification of plastic waste as waste-to-energy or waste-to-syngas recovery route
Brems, A., Dewil, R., Baeyens, J., & Zhang, R. (2013) · Natural Science · doi:10.4236/ns.2013.56086 · Cited by 87
Cleary, J. (2010) · The International Journal of Life Cycle Assessment · doi:10.1007/s11367-010-0186-1 · Cited by 83
The use of valuation and weighting sets in environmental impact assessment
Ahlroth, S. (2014) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2013.11.012 · Cited by 80
Supporting environmentally sound decisions for waste management with LCT and LCA
Manfredi, S., Pant, R., Pennington, D., & Versmann, A. (2011) · The International Journal of Life Cycle Assessment · doi:10.1007/s11367-011-0315-5 · Cited by 79
LCA of local strategies for energy recovery from waste in England, applied to a large municipal flow
Tunesi, S. (2010) · Waste Management · doi:10.1016/j.wasman.2010.08.023 · Cited by 75
Interpretation of comparative LCAs: external normalization and a method of mutual differences
Prado, V., Wender, B. A., & Seager, T. P. (2017) · The International Journal of Life Cycle Assessment · doi:10.1007/s11367-017-1281-3 · Cited by 68
Economic and environmental optimization of waste treatment
Münster, M., Ravn, H., Hedegaard, K., Juul, N., & Söderman, M. L. (2015) · Waste Management · doi:10.1016/j.wasman.2014.12.005 · Cited by 65
LCI (Life cycle inventory) analysis of fuels and electricity generation in Singapore
Tan, R. B. H., Wijaya, D., & Hsien Hui, K. H. O. O. (2010) · Energy · doi:10.1016/j.energy.2010.08.036 · Cited by 58
Self-citationToward maximizing the recycling rate in a Sapporo waste plastics liquefaction plant
Fukushima, M., Shioya, M., Wakai, K., et al. (2009) · Journal of Material Cycles and Waste Management · doi:10.1007/s10163-008-0212-6 · Cited by 46
PLASMIX management: LCA of six possible scenarios
Cossu, R., Garbo, F., Girotto, F., Simion, F., & Pivato, A. (2017) · Waste Management · doi:10.1016/j.wasman.2017.08.007 · Cited by 45
Kuo, J., Lin, C.-L., Chen, J.-C., Tseng, H., & Wey, M. (2011) · International journal of greenhouse gas control · doi:10.1016/j.ijggc.2011.03.001 · Cited by 32
Economic policy instruments for plastic waste
Hennlock, M., Castell-Rüdenhausen, M. Z., Wahlström, M., Kjær, B., Milios, L., Vea, E. B., Watson, D. J., Hanssen, O. J., Fråne, A., Stenmarc, Å., et al. (2015) · TemaNord · doi:10.6027/tn2014-569 · Cited by 29
Influence of Plastic Waste for Refuse-Derived Fuel on Downdraft Gasification
Kungkajit, C., Prateepchaikul, G., & Kaosol, T. (2015) · Energy Procedia · doi:10.1016/j.egypro.2015.11.529 · Cited by 27
Cited by
Jeswani, H., Krüger, C., Russ, M., Horlacher, M., Antony, F., Hann, S., & Azapagic, A. (2021) · Science of The Total Environment · doi:10.1016/j.scitotenv.2020.144483 · Cited by 625
Expanding plastics recycling technologies: chemical aspects, technology status and challenges
Li, H., Aguirre-Villegas, H. A., Allen, R. D., Bai, X., Benson, C. H., Beckham, G. T., Bradshaw, S. L., Brown, J. L., Brown, R. C., Cecon, V. S., et al. (2022) · Green Chemistry · doi:10.1039/d2gc02588d · Cited by 616
Ding, Y., Zhao, J., Liu, J.-W., Zhou, J., Cheng, L., Zhao, J., Shao, Z., Iris, Ç., Pan, B., Li, X., et al. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2021.126144 · Cited by 551
Pyrolysis technology for plastic waste recycling: A state-of-the-art review
Dai, L., Zhou, N., Lv, Y., Cheng, Y., Wang, Y., Liu, Y., Cobb, K., Chen, P., Lei, H., & Ruan, R. (2022) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2022.101021 · Cited by 485
Recycling of multilayer plastic packaging materials by solvent-targeted recovery and precipitation
Walker, T. W., Frelka, N., Shen, Z., Chew, A. K., Banick, J., Grey, S., Kim, M. S., Dumesic, J. A., Van Lehn, R. C., & Huber, G. W. (2020) · Science Advances · doi:10.1126/sciadv.aba7599 · Cited by 442
Metadata
- Authors
- Khoo, H. H.
- Venue
- Resources, Conservation and Recycling
- Publisher
- Elsevier BV
- Published
- 2019-06
- Volume
- 145
- Pages
- 67-77
- ISSN
- 0921-3449 (ISSN-L)
- OpenAlex
- W2917517340
- Cited by
- 286
- References
- 38
- FWCI
- 22.48
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.