The DOI matches its Crossref record; 45 of the 45 references it cites were found in a registry or an index.
The recycling and reuse of steelmaking slags — A review
Abstract
Abstract Large volumes of slags are formed as by-products during the refinement of pig iron by basic oxygen steelmaking or electric arc furnace steelmaking. In order to lower the environmental impact of the steel industry and ensure its economic sustainability, there have been significant studies finding the ways to recycle by-products. The formation, composition and physical properties of steel making slag are discussed with regard to the problems associated with its reuse. The volume instability caused by free lime exposure to moisture means that the reuse of steelmaking slag is often limited as many potential applications, and the leaching behavior of steelmaking slag is important for environmental considerations. Land-based applications that have been demonstrated include replacing natural sand as aggregate in cement, which may be combined with the CO2 sequestration properties. Steel slag shows use as a liming material (when spread over acidic soils to help to raise the pH to a more neutral level) and to enhance the physical properties of soft soils. Potential benefits to the marine environment is due to high porosity and large surface area, making slags ideal for coral reef repair (e.g., overcoming coral bleaching) and replacement (e.g., artificial reef to promote growth of green marine plants and seagrass), as well as a growth promoter for seaweed and phytoplankton that are microscopic organisms that are an essential component of ecosystems in oceans around the world. The chemistry of steelmaking slag also makes it a contender for adsorption of H2S and metalloids from marine environments.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Arsenic removal from water/wastewater using adsorbents—A critical review
Mohan, D., & Pittman, C. U. (2007) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2007.01.006 · Cited by 3,536
The Interfacial Transition Zone (ITZ) Between Cement Paste and Aggregate in Concrete
Scrivener, K. L., Crumbie, A. K., & Laugesen, P. (2004) · Interface Science · doi:10.1023/b:ints.0000042339.92990.4c · Cited by 1,460
Functional and smart coatings for corrosion protection: A review of recent advances
Montemor, M. F. (2014) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2014.06.031 · Cited by 1,176
Coral reef bleaching: ecological perspectives
Glynn, P. W. (1993) · Coral Reefs · doi:10.1007/bf00303779 · Cited by 1,063
Products of steel slags an opportunity to save natural resources
Motz, H., & Geiseler, J. (2001) · Waste Management · doi:10.1016/s0956-053x(00)00102-1 · Cited by 823
An Overview of Utilization of Steel Slag
Yi, H., Xu, G., Cheng, H., Wang, J., Wan, Y., & Chen, H. (2012) · Procedia Environmental Sciences · doi:10.1016/j.proenv.2012.10.108 · Cited by 764
Chemical, Mineralogical, and Morphological Properties of Steel Slag
Yildirim, I. Z., & Prezzi, M. (2011) · Advances in Civil Engineering · doi:10.1155/2011/463638 · Cited by 738
Steel Slag—Its Production, Processing, Characteristics, and Cementitious Properties
Shi, C. (2004) · Journal of Materials in Civil Engineering · doi:10.1061/(asce)0899-1561(2004)16:3(230 · Cited by 734
An overview of recovery of metals from slags
Shen, H., & Forssberg, E. (2003) · Waste Management · doi:10.1016/s0956-053x(02)00164-2 · Cited by 592
Proctor, D. M., Fehling, K. A., Shay, E. C., Wittenborn, J. L., Green, J. J., Avent, C., Bigham, R. D., Connolly, M., Lee, B., Shepker, T. O., et al. (2000) · Environmental Science & Technology · doi:10.1021/es9906002 · Cited by 493
Cited by
Steel slag and its applications in cement and concrete technology: A review
Gencel, O., Karadag, O., Oren, O. H., & Bilir, T. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2021.122783 · Cited by 391
Martins, A. C. P., Franco de Carvalho, J. M., Costa, L. C. B., Andrade, H. D., de Melo, T. V., Ribeiro, J. C. L., Pedroti, L. G., & Peixoto, R. A. F. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2021.123265 · Cited by 258
Metadata
- Authors
- Fisher, L. V., & Barron, A. R.
- Venue
- Resources, Conservation and Recycling
- Publisher
- Elsevier BV
- Published
- 2019-07
- Volume
- 146
- Pages
- 244-255
- ISSN
- 0921-3449 (ISSN-L)
- OpenAlex
- W2932337921
- Cited by
- 279
- References
- 45
- FWCI
- 18.57
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: The recycling and reuse of steelmaking slags — A review. https://app.cochat.ai/papers/10.1016/j.resconrec.2019.03.010
- The paper
- Fisher, L. V., & Barron, A. R. (2019). The recycling and reuse of steelmaking slags — A review. Resources, Conservation and Recycling. https://doi.org/10.1016/j.resconrec.2019.03.010
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.