The DOI matches its Crossref record; 45 of the 45 references it cites were found in a registry or an index.
The recycling and reuse of steelmaking slags — A review
Abstract
Abstract Large volumes of slags are formed as by-products during the refinement of pig iron by basic oxygen steelmaking or electric arc furnace steelmaking. In order to lower the environmental impact of the steel industry and ensure its economic sustainability, there have been significant studies finding the ways to recycle by-products. The formation, composition and physical properties of steel making slag are discussed with regard to the problems associated with its reuse. The volume instability caused by free lime exposure to moisture means that the reuse of steelmaking slag is often limited as many potential applications, and the leaching behavior of steelmaking slag is important for environmental considerations. Land-based applications that have been demonstrated include replacing natural sand as aggregate in cement, which may be combined with the CO2 sequestration properties. Steel slag shows use as a liming material (when spread over acidic soils to help to raise the pH to a more neutral level) and to enhance the physical properties of soft soils. Potential benefits to the marine environment is due to high porosity and large surface area, making slags ideal for coral reef repair (e.g., overcoming coral bleaching) and replacement (e.g., artificial reef to promote growth of green marine plants and seagrass), as well as a growth promoter for seaweed and phytoplankton that are microscopic organisms that are an essential component of ecosystems in oceans around the world. The chemistry of steelmaking slag also makes it a contender for adsorption of H2S and metalloids from marine environments.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Arsenic removal from water/wastewater using adsorbents—A critical review
Mohan, D., & Pittman, C. U. (2007) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2007.01.006 · Cited by 3,536
The Interfacial Transition Zone (ITZ) Between Cement Paste and Aggregate in Concrete
Scrivener, K. L., Crumbie, A. K., & Laugesen, P. (2004) · Interface Science · doi:10.1023/b:ints.0000042339.92990.4c · Cited by 1,460
Functional and smart coatings for corrosion protection: A review of recent advances
Montemor, M. F. (2014) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2014.06.031 · Cited by 1,176
Coral reef bleaching: ecological perspectives
Glynn, P. W. (1993) · Coral Reefs · doi:10.1007/bf00303779 · Cited by 1,063
Products of steel slags an opportunity to save natural resources
Motz, H., & Geiseler, J. (2001) · Waste Management · doi:10.1016/s0956-053x(00)00102-1 · Cited by 823
An Overview of Utilization of Steel Slag
Yi, H., Xu, G., Cheng, H., Wang, J., Wan, Y., & Chen, H. (2012) · Procedia Environmental Sciences · doi:10.1016/j.proenv.2012.10.108 · Cited by 764
Chemical, Mineralogical, and Morphological Properties of Steel Slag
Yildirim, I. Z., & Prezzi, M. (2011) · Advances in Civil Engineering · doi:10.1155/2011/463638 · Cited by 738
Steel Slag—Its Production, Processing, Characteristics, and Cementitious Properties
Shi, C. (2004) · Journal of Materials in Civil Engineering · doi:10.1061/(asce)0899-1561(2004)16:3(230 · Cited by 734
An overview of recovery of metals from slags
Shen, H., & Forssberg, E. (2003) · Waste Management · doi:10.1016/s0956-053x(02)00164-2 · Cited by 592
Proctor, D. M., Fehling, K. A., Shay, E. C., Wittenborn, J. L., Green, J. J., Avent, C., Bigham, R. D., Connolly, M., Lee, B., Shepker, T. O., et al. (2000) · Environmental Science & Technology · doi:10.1021/es9906002 · Cited by 493
Mortimer, C. H. (1971) · Limnology and Oceanography · doi:10.4319/lo.1971.16.2.0387 · Cited by 436
Use of steel slag as a granular material: Volume expansion prediction and usability criteria
Wang, G., Wang, Y., & Gao, Z. (2010) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2010.08.071 · Cited by 392
Utilization of carbonated and granulated steel slag aggregate in concrete
Pang, B., Zhou, Z., & Xu, H. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.03.008 · Cited by 301
Accelerated carbonation of steelmaking slags in a high-gravity rotating packed bed
Chang, E.-E., Pan, S.-Y., Chen, Y.-H., Tan, C.-S., & Chiang, P.-C. (2012) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2012.05.021 · Cited by 258
(2008) · Cited by 201
Stabilization of basic oxygen furnace slag by hot-stage carbonation treatment
Santos, R. M., Ling, D., Sarvaramini, A., Guo, M., Elsen, J., Larachi, F., Beaudoin, G., Blanpain, B., & Van Gerven, T. (2012) · Chemical Engineering Journal · doi:10.1016/j.cej.2012.06.155 · Cited by 196
Soil Stabilization Using Basic Oxygen Steel Slag Fines
Poh, H. Y., Ghataora, G. S., & Ghazireh, N. (2006) · Journal of Materials in Civil Engineering · doi:10.1061/(asce)0899-1561(2006)18:2(229 · Cited by 194
A fundamental research on phosphate removal by using slag
Yamada, H., Kayama, M., Saito, K., & Hara, M. (1986) · Water Research · doi:10.1016/0043-1354(86)90018-7 · Cited by 172
Blanco, I., Pascal Molle, A., de Miera, L. E. S., & Ansola, G. (2015) · Water Research · doi:10.1016/j.watres.2015.11.064 · Cited by 156
Bodor, M., Santos, R. M., Cristea, G., Salman, M., Çizer, Ö., Iacobescu, R. I., Chiang, Y. W., Balen, K. V., Vlad, M. D., & Gerven, T. V. (2015) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2015.10.002 · Cited by 137
Chen, K.-W., Pan, S.-Y., Chen, C.-T., Chen, Y., & Chiang, P. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.02.072 · Cited by 136
On the use of blast furnace slag and steel slag in the preparation of green artificial reef concrete
Huang, X., Wang, Z., Liu, Y., Hu, W., & Ni, W. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.02.088 · Cited by 126
The recycling effect of BOF slag in the portland cement properties
Zago, S. D. C., Vernilli, F., Almeida, B., Demarco, M., & Silva, S. N. (2017) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2017.08.021 · Cited by 121
Barca, C., Troesch, S., Meyer, D., Drissen, P., Andrès, Y., & Chazarenc, F. (2012) · Environmental Science & Technology · doi:10.1021/es303778t · Cited by 114
Accelerated Carbonation of Steel Slag Compacts: Development of High-Strength Construction Materials
Quaghebeur, M., Nielsen, P., Horckmans, L., & Mechelen, D. V. (2015) · Frontiers in Energy Research · doi:10.3389/fenrg.2015.00052 · Cited by 87
Basic oxygen furnace (BOF) slag cooling: Laboratory characteristics and prediction calculations
Gautier, M., Poirier, J., Bodénan, F., Franceschini, G., & Véron, E. (2013) · International Journal of Mineral Processing · doi:10.1016/j.minpro.2013.05.002 · Cited by 85
Dissolution Behavior of Nutrition Elements from Steelmaking Slag into Seawater
Futatsuka, T., Shitogiden, K., Miki, T., Nagasaka, T., & Hino, M. (2004) · ISIJ International · doi:10.2355/isijinternational.44.753 · Cited by 84
Application of magnetic separation to steelmaking slags for reclamation
Alanyali, H., ÇÖL, M., Yılmaz, M., & Karagöz, Ş. (2006) · Waste Management · doi:10.1016/j.wasman.2006.01.017 · Cited by 66
Ma, N., & Houser, J. B. (2014) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2014.06.092 · Cited by 57
Removal of hydrogen sulfide using carbonated steel slag
Asaoka, S., Okamura, H., Morisawa, R., Murakami, H., Fukushi, K., Okajima, T., Katayama, M., Inada, Y., Yogi, C., & Ohta, T. (2013) · Chemical Engineering Journal · doi:10.1016/j.cej.2013.05.065 · Cited by 56
Guo, H., Yin, S., Yu, Q., Yang, X., Huang, H., Yang, Y. Q., & Gao, F. (2017) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2017.10.027 · Cited by 55
Thermal behaviour of basic oxygen furnace waste slag
Mikhail, S. A., & Turcotte, A. (1995) · Thermochimica Acta · doi:10.1016/0040-6031(94)02413-i · Cited by 53
Pistocchi, C., Ragaglini, G., Colla, V., Branca, T. A., Tozzini, C., & Romaniello, L. (2017) · Journal of Environmental Management · doi:10.1016/j.jenvman.2017.05.007 · Cited by 50
Mechanism and kinetics of Cr(VI) reduction by waste slag generated from iron making industry
Park, D., Lim, S., Lee, H. W., & Park, J. M. (2008) · Hydrometallurgy · doi:10.1016/j.hydromet.2008.03.003 · Cited by 41
Biomethane production from various segments of brown seaweed
Tabassum, M. R., Xia, A., & Murphy, J. D. (2018) · Energy Conversion and Management · doi:10.1016/j.enconman.2018.08.084 · Cited by 41
Taneez, M., Hurel, C., Mady, F., & Francour, P. (2018) · Environmental Pollution · doi:10.1016/j.envpol.2018.04.089 · Cited by 37
Kinetics and mechanism of hexavalent chromium removal by basic oxygen furnace slag
Han, C. S., Jiao, Y., Wu, Q., Yang, W., Yang, H., & Xue, X. (2016) · Journal of Environmental Sciences · doi:10.1016/j.jes.2015.09.024 · Cited by 36
Blastfurnace and steel slag: production, properties, and uses
Lee, A. R. (1974) · Medical Entomology and Zoology · Cited by 33
Stabilization of Free Lime in BOF Slag by Melting and Solidification in Air
Liu, C., Guo, M., Pandelaers, L., Blanpain, B., & Huang, S. (2016) · Metallurgical and Materials Transactions B · doi:10.1007/s11663-016-0809-4 · Cited by 26
Efficient Removal of Arsenic (V) from Water Using Steel‐Making Slag
Chakraborty, A., Sengupta, A., Bhadu, M. K., Pandey, A., & Mondal, A. (2014) · Water Environment Research · doi:10.2175/106143014x13975035524907 · Cited by 22
Lupu, C., Jackson, K. L., Bard, S., & Barron, A. R. (2007) · Industrial & Engineering Chemistry Research · doi:10.1021/ie0709279 · Cited by 21
Self-citationMechanism of Suppression of Sulfide Ion in Seawater Using Steelmaking Slag
Hayashi, A., Asaoka, S., Watanabe, T., Kaneko, R., Takahashi, K., Miyata, Y., Kim, K., Yamamoto, T., Inoue, R., & Ariyama, T. (2014) · ISIJ International · doi:10.2355/isijinternational.54.1741 · Cited by 20
Decrease of Sulfide in Enclosed Coastal Sea by Using Steelmaking Slag
Hayashi, A., Watanabe, T., Kaneko, R., Takano, A., Takahashi, K., Miyata, Y., Matsuo, S., Yamamoto, T., Inoue, R., & Ariyama, T. (2013) · ISIJ International · doi:10.2355/isijinternational.53.1894 · Cited by 19
Zhou, W., Huang, Z., Sun, C., Zhao, H., & Zhang, Y. (2016) · Bioresource Technology · doi:10.1016/j.biortech.2016.05.008 · Cited by 19
Control over Cement Setting Through the Use of Chemically Modified Fly Ash
Lupu, C., Jackson, K. L., Bard, S., Rusakova, I., & Barron, A. R. (2006) · Advanced Engineering Materials · doi:10.1002/adem.200500280 · Cited by 13
Self-citation
Cited by
Steel slag and its applications in cement and concrete technology: A review
Gencel, O., Karadag, O., Oren, O. H., & Bilir, T. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2021.122783 · Cited by 391
Martins, A. C. P., Franco de Carvalho, J. M., Costa, L. C. B., Andrade, H. D., de Melo, T. V., Ribeiro, J. C. L., Pedroti, L. G., & Peixoto, R. A. F. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2021.123265 · Cited by 258
Metadata
- Authors
- Fisher, L. V., & Barron, A. R.
- Venue
- Resources, Conservation and Recycling
- Publisher
- Elsevier BV
- Published
- 2019-07
- Volume
- 146
- Pages
- 244-255
- ISSN
- 0921-3449 (ISSN-L)
- OpenAlex
- W2932337921
- Cited by
- 279
- References
- 45
- FWCI
- 18.57
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.