Polymer-specific dynamic probabilistic material flow analysis of seven polymers in Europe from 1950 to 2016
Open accessThe DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Abstract
Information on the flows of specific polymers through the anthroposphere forms the basis of any assessment of the environmental implications of plastic. This work presents a dynamic probabilistic material flow analysis of seven commodity thermoplastics: low-density polyethylene (LDPE), high-density polyethylene (HDPE), polypropylene (PP), polystyrene (PS), expanded polystyrene (EPS), polyvinylchloride (PVC), and polyethylene terephthalate (PET). The analysis examines nine product sectors and 35 product categories, including textiles, across Europe from 1950 to 2016. Total consumption of these seven polymers was 90.0 ± 4.8 kg/cap in 2016. The in-use stock that year was 47 kg/cap for LDPE, 81 kg/cap for HDPE, 81 kg/cap for PP, 21 kg/cap for PS, 56 kg/cap for EPS, 163 kg/cap for PVC, and 16 kg/cap for PET. For EPS and PVC, the fraction contained in the in-use stock is 51% and 39% of the total production. Landfill is the major compartment where LDPE, HDPE, PP, PS, and PET end up (48%–60%). Elimination—incineration and destruction in waste incineration plants—occurs for 15%–19% of LDPE, HDPE, PP, PS, and PET, and 10% of EPS and PVC. Current European recycling rates vary from 11% for PS to 33% for PET. The precise separation of different polymers into very detailed product categories will allow the formulation of future scenarios about interventions to improve the circularity of specific polymers and provide the basis to assess the polymer-specific releases to the environment.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Plastic and Human Health: A Micro Issue?
Wright, S. L., & Kelly, F. J. (2017) · Environmental Science & Technology · doi:10.1021/acs.est.7b00423 · Cited by 3,413 · cited 2×
“There are many questions relating to plastic’s environmental and human health impacts (Wright and Kelly, 2017), its waste management, and particularly its recyclability (Heidbreder et al., 2019).”
BackgroundProbabilistic Material Flow Analysis of Seven Commodity Plastics in Europe
Kawecki, D., Scheeder, P. R. W., & Nowack, B. (2018) · Environmental Science & Technology · doi:10.1021/acs.est.8b01513 · Cited by 232 · cited 16×
“A separate analysis of the flows of seven important polymers within the EU (Kawecki et al., 2018) looked at low-density polyethylene (LDPE), high-density polyethylene (HDPE), polypropylene (PP), polystyrene (PS), expanded polystyrene (EPS), polyvinylchloride (PVC), and polyethylene terephthalate…”
BackgroundMethodInfluentialSelf-citationEriksen, M. K., Pivnenko, K., Faraca, G., Boldrin, A., & Astrup, T. F. (2020) · Environmental Science & Technology · doi:10.1021/acs.est.0c03435 · Cited by 130
Assessment of Plastic Stocks and Flows in China: 1978-2017
Jiang, X., Wang, T., Jiang, M., Xu, M., Yu, Y., Guo, B., Chen, D., Hu, S., Jiang, J., Zhang, Y., et al. (2020) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2020.104969 · Cited by 129 · cited 10×
“Therefore, many MFA studies did not assess fibers, e.g. Jiang et al. (2020).”
BackgroundMethodInfluential
Cited by
Wojnowska-Baryła, I., Bernat, K., & Zaborowska, M. (2022) · International Journal of Environmental Research and Public Health · doi:10.3390/ijerph192013223 · Cited by 348
“Landfills constitute the major repository of LDPE, HDPE, PP, PS, and PET (48–60%) [13].”
BackgroundKan, M., Wang, C., Zhu, B., Chen, W., Liu, Y., Ren, Y., & Xu, M. (2023) · Journal of Industrial Ecology · doi:10.1111/jiec.13427 · Cited by 38
Xia, L., Ke, Y., Wu, Z., Wang, J., Wang, R., Cai, Y., & Yang, Z. (2024) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2024.107429 · Cited by 36
Metadata
- Authors
- Kawecki, D., Wu, Q., Gonçalves, J. S. V., & Nowack, B.
- Venue
- Resources, Conservation and Recycling
- Publisher
- Elsevier BV
- Published
- 2021-10
- Volume
- 173
- Pages
- 105733
- ISSN
- 0921-3449 (ISSN-L)
- OpenAlex
- W3173809408
- Cited by
- 50
- References
- 4
- FWCI
- 1.82
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Polymer-specific dynamic probabilistic material flow analysis of seven polymers in Europe from 1950 to 2016. https://app.cochat.ai/papers/10.1016/j.resconrec.2021.105733
- The paper
- Kawecki, D., Wu, Q., Gonçalves, J. S. V., & Nowack, B. (2021). Polymer-specific dynamic probabilistic material flow analysis of seven polymers in Europe from 1950 to 2016. Resources, Conservation and Recycling. https://doi.org/10.1016/j.resconrec.2021.105733
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.