CoChat

Fabrication and characterization of TiO2/SiO2 based Bragg reflectors for light trapping applications

Open access
Dubey, R.S., Ganesan, V. · 2017 · Results in Physics
Cited by 40

The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.

Abstract

Distributed Bragg reflectors (DBRs) have received an intensive attention due to their increasing demand in optoelectronic and photonic devices. Such reflectors are capable to prohibit the light propagation within the specified wavelength range of interest. In this paper, we present the fabrication of TiO2/SiO2 stacks based Bragg reflectors by using a simple and in-expensive sol-gel spin coating technique. The prepared single-layer thin films of TiO2 and SiO2 onto glass substrates were characterized for their optical constants. By tuning the process parameters, one-seven DBR stacks of TiO2/SiO2 were prepared. The corresponding shift of the Bragg reflection peak was observed with the increased number of DBR stacks and as much as about 90% reflectance is observed from the 7DBR stacks. The experimentally measured reflectance was compared with the simulated one, which showed good in agreement. FESEM measurement has confirmed the formation of bright and dark strips of TiO2 and SiO2 films with their thicknesses 80 and 115 nm respectively. The simulation study was explored to a design of thin film silicon solar cell using 7DBR stacks. An enhancement in light absorption in the visible wavelength range is observed which coincides with the experimental result of the reflectance. The use of DBR at the bottom of the solar cell could felicitate the better light harvesting with the occurrence of Fabry-Perot resonances in the absorbing layer.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1016/j.rinp.2017.06.041

Cites

1 of 1 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 1 references

Research works printed but not linked: 13

  1. Isabella, 2012, Design and application of dielectric distributed Bragg back reflector in thin-film silicon solar cells, J Non-Cryst Solids, 358, 2295, 10.1016/j.jnoncrysol.2011.11.025 · DOI
  2. Fu, 2015, Widely tunable distributed Bragg reflectors integrated into nanowire waveguides, Nano Lett, 15, 6909, 10.1021/acs.nanolett.5b02839 · doi:10.1021/acs.nanolett.5b02839
  3. Lee, 2015, Optically pumped GaN vertical cavity surface emitting laser with high index-contrast nanoporous distributed Bragg reflector, Opt Express, 23, 11023, 10.1364/OE.23.011023 · doi:10.1364/oe.23.011023
  4. Han, 2012, Fabrication of TiO2/SiO2 multilayer film structure by the sol-gel process with efficient thermal treatment methods, Appl Surf Sci, 263, 69, 10.1016/j.apsusc.2012.08.123 · DOI
  5. Barhoum, 2011, Rapid sol−gel fabrication of high-quality thin-film stacks on planar and curved substrates, Chem. Mater., 23, 5177, 10.1021/cm202019b · DOI
  6. Liu, 2013, Preparation and property of TiO2/SiO2 multilayer film on the fabric by sol-gel process, Fibers Polym, 14, 1101, 10.1007/s12221-013-1101-8 · DOI
  7. Chen, 1999, SiO2/TiO2 omnidirectional reflector and microcavity resonator via the sol-gel method, Appl Phys Lett, 75, 3805, 10.1063/1.125462 · DOI
  8. Hinczewski, 2005, Optical filters from SiO2 and TiO2 multi-layers using sol-gel spin coating method, Sol Energy Mater Sol Cells, 87, 181, 10.1016/j.solmat.2004.07.022 · DOI
  9. Yasuda, 2010, Synthesis of reflective TiO2/SiO2 multilayer flakes for solar cell application, Dyes Pigm, 86, 278, 10.1016/j.dyepig.2010.01.008 · doi:10.1016/j.dyepig.2010.01.008
  10. Rabaste, 2002, Sol-gel fabrication of thick multilayers applied to Bragg reflectors and microcavities, Thin Solid Films, 416, 242, 10.1016/S0040-6090(02)00722-8 · DOI
  11. Fuertes, 2007, Photonic crystals from ordered mesoporous thin-film functional building blocks, Adv Funct Mater, 17, 1247, 10.1002/adfm.200601190 · DOI · Paper page
  12. Colodrero, 2008, Nanoparticle-based one-dimensional photonic crystals, Langmuir, 24, 4430, 10.1021/la703987r · DOI · Paper page
  13. Anaya, 2016, Solution processed high refractive index contrast distributed Bragg reflectors, J Mater Chem C, 4, 10.1039/C6TC00663A · DOI

Cited by

See all 40

Metadata

Authors
Dubey, R. S., & Ganesan, V.
Venue
Results in Physics
Publisher
Elsevier BV
Published
2017
Volume
7
Pages
2271-2276
ISSN
2211-3797 (ISSN-L)
OpenAlex
W2729296791
Cited by
40
References
1
FWCI
1.06
Type
journal article
Language
en
Open access
gold
Licence

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Fabrication and characterization of TiO2/SiO2 based Bragg reflectors for light trapping applications. https://app.cochat.ai/papers/10.1016/j.rinp.2017.06.041
The paper
Dubey, R. S., & Ganesan, V. (2017). Fabrication and characterization of TiO2/SiO2 based Bragg reflectors for light trapping applications. Results in Physics. https://doi.org/10.1016/j.rinp.2017.06.041

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.