Human-robot cooperative control based on sEMG for the upper limb exoskeleton robot
The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
Abstract
An exoskeleton robot is a mechanical structure that integrates with the exterior of the human body to improve the wearer’s muscular power. The key to ensure performances and comfort of the system is human–robot cooperation. This paper proposes a human–robot cooperative control method based on sEMG (surface Electromyography) signals to drive a pneumatic upper limb exoskeleton to act in accordance with the wearer’s motion intentions. The intended movement information of the human is estimated by combining the regression method with the classification method. Based on the joint torque estimation model which is originated from the Hill-type musculoskeletal model, the regression method is used to estimate the joint’s desired torque by merging the sEMG signal with the joint angle. To avoid shaking and keep the robot’s limbs in the static condition, a classification method with the support vector machine is developed to find out the joint state that the human intends to keep. It was then applied to the exoskeleton’s elbow joint flexion and extension movement experiments to verify the controller’s effectiveness. The experimental results demonstrate that the controller can estimate human’s motion intention accurately and is appropriate for the human–robot collaboration.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Cortes, C., & Vapnik, V. (1995) · Machine Learning · doi:10.1007/bf00994018 · Cited by 59,421
Development of recommendations for SEMG sensors and sensor placement procedures
Hermens, H. J., Freriks, B., Disselhorst-Klug, C., & Rau, G. (2000) · Journal of Electromyography and Kinesiology · doi:10.1016/s1050-6411(00)00027-4 · Cited by 7,213
The variation in isometric tension with sarcomere length in vertebrate muscle fibres
Gordon, A. M., Huxley, A. F., & Julian, F. J. (1966) · The Journal of Physiology · doi:10.1113/jphysiol.1966.sp007909 · Cited by 3,152
Myoelectric control systems—A survey
Asghari Oskoei, M., & Hu, H. (2007) · Biomedical Signal Processing and Control · doi:10.1016/j.bspc.2007.07.009 · Cited by 1,244
A survey of sensor fusion methods in wearable robotics
Novak, D., & Riener, R. (2015) · Robotics and Autonomous Systems · doi:10.1016/j.robot.2014.08.012 · Cited by 252
An exoskeletal robot for human elbow motion support‐sensor fusion, adaptation, and control
Kiguchi, K., Kariya, S., Watanabe, K., Izumi, K., & Fukuda, T. (2001) · IEEE Transactions on Systems, Man and Cybernetics, Part B (Cybernetics) · doi:10.1109/3477.931520 · Cited by 159
Cited by
Toward human-centric smart manufacturing: A human-cyber-physical systems (HCPS) perspective
Wang, B., Zheng, P., Yin, Y., Shih, A., & Wang, L. (2022) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2022.05.005 · Cited by 365
sEMG-Based Lower Limb Motion Prediction Using CNN-LSTM with Improved PCA Optimization Algorithm
Zhu, M., Guan, X., Li, Z., He, L., Wang, Z., & Cai, K. (2023) · Journal of Bionic Engineering · doi:10.1007/s42235-022-00280-3 · Cited by 102
Lee, J., Kwon, K., Soltis, I., Matthews, J., Lee, Y. J., Kim, H., Romero, L., Zavanelli, N., Kwon, Y., Kwon, S., et al. (2024) · npj Flexible Electronics · doi:10.1038/s41528-024-00297-0 · Cited by 77
Zhu, M., Guan, X., Li, Z., Gao, Y., Zou, K., Gao, X., Wang, Z., Li, H., & Cai, K. (2022) · International Journal of Advanced Robotic Systems · doi:10.1177/17298806221119668 · Cited by 11
Metadata
- Authors
- Liu, H., Tao, J., Lyu, P., & Tian, F.
- Venue
- Robotics and Autonomous Systems
- Publisher
- Elsevier BV
- Published
- 2020-03
- Volume
- 125
- Pages
- 103350
- ISSN
- 0921-8890 (ISSN-L)
- OpenAlex
- W2986137493
- Cited by
- 70
- References
- 6
- FWCI
- 2.74
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.