CoChat

Lithium in thermal energy storage: A state-of-the-art review

Open access
Cabeza, Luisa F., Gutierrez, Andrea, Barreneche, Camila, Ushak, Svetlana, Fernández, Ángel G., Inés Fernádez, A., Grágeda, Mario · 2015 · Renewable and Sustainable Energy Reviews
Cited by 128

The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.

Abstract

Lithium, mainly used in electrical energy storage, has also been studied in thermal energy storage. It is recognized as a “critical material” and is produced from minerals and from brines. Chile is one of the biggest producers, here from brine and with lower costs than in other countries. With sensible heat storage, in solar power plants lithium is seen as a way to improve the properties of molten salts used today. The low melting point in these ternary salts with lithium, represent a considerable reduction in the maintenance and operational costs associated with current solar technology, demonstrating that the fluids showed, are potential candidates for thermal energy storage (TES) in concentrated solar plants (CSP) plants. Many materials have been studied and proposed to be used as phase change materials (PCM). Between the multiple materials studied to be used in PCM, lithium materials and mixtures are listed as potential PCM for building applications and for high temperature applications. In thermochemical energy storage, lithium compounds have been used mainly in chemical heat pumps, following their use in absorption cooling.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1016/j.rser.2014.10.096

Cites

3 of 3 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Research works printed but not linked: 25

  1. Ruankham, 2011, Vertically aligned ZnO nanorods doped with lithium for polymer solar cells: defect related photovoltaic properties, J Mater Chem, 21, 9710, 10.1039/c0jm04452k · doi:10.1039/c0jm04452k
  2. Qingjiang Yu, 2010, Solar cells: the influence of lithium ions on exciton dissociation, charge recombination, and surface states, ACS Nano, 4, 6032, 10.1021/nn101384e · DOI · Paper page
  3. Macklin, 1992, Electrochemical intercalation of alkali metals into superconducting oxide phases, J Mater Chem, 2, 439, 10.1039/jm9920200439 · doi:10.1039/jm9920200439
  4. Matusita, 1993, Interface reaction between oxide glasses and Fe–Al–Si magnetic alloy, J Mater Sci, 28, 6333, 10.1007/BF01352193 · doi:10.1007/bf01352193
  5. Pletka, 2001, Indirectly heated biomass gasification using a latent heat ballast—1: Experimental evaluations, Biomass Bioenergy, 20, 297, 10.1016/S0961-9534(00)00088-X · DOI
  6. Andersson, 1987, Thermal conductivity and heat capacity of single-crystal LiF and CaF2 under hydrostatic pressure, J Phys C: Solid State Phys, 20, 5951, 10.1088/0022-3719/20/35/011 · doi:10.1088/0022-3719/20/35/011
  7. Cabeza LF, Castell A, Barreneche C, de Gracia A, Fernández AI. Materials used as PCM in thermal energy storage in buildings: a review. Renewable Sustainable Energy Rev2011:15;1675–1695. 10.1016/j.rser.2010.11.018. · DOI · Paper page
  8. Khudhair, 2004, A review on energy conservation in building applications with thermal storage by latent heat using phase change materials, Energy Convers Manage, 45, 263, 10.1016/S0196-8904(03)00131-6 · DOI · Paper page
  9. Michels, 2007, Cascaded latent heat storage for parabolic trough solar power plants, Sol Energy, 81, 829, 10.1016/j.solener.2006.09.008 · DOI · Paper page
  10. Solé, 2013, Requirements to consider when choosing a thermochemical material for solar energy storage, Sol Energy, 97, 398, 10.1016/j.solener.2013.08.038 · doi:10.1016/j.solener.2013.08.038
  11. Grágeda M. Production of battery grade lithium hydroxide: energy efficiency and water consumption. In: First international workshop in “lithium, industrial minerals and energy”, Antofagasta, Chile; 2014.
  12. CES Selector 2013 software, Granta Design Limited, Cambridge, UK; 2013. 〈www.Grantadesign.com〉.
  13. Gil A, Medrano M, Martorell I, Lázaro A, Dolado P, Zalba B, et al. State of the art on high temperature thermal energy storage for power generation. Part 1—Concepts, materials and modellization. Renewable Sustainable Energy Rev 2010:14;31–55. 10.1016/j.rser.2009.07.035. · DOI · Paper page
  14. Medrano, 2010, State of the art on high temperature thermal energy storage for power generation. Part 2—Case studies, Renewable Sustainable Energy Rev, 56, 10.1016/j.rser.2009.07.036 · DOI · Paper page
  15. Wang, 2012, Thermal stability of the eutectic composition in LiNO3–NaNO3–KNO3 ternary system used for thermal energy storage, Sol Energy Mater Sol Cells, 100, 162, 10.1016/j.solmat.2012.01.009 · doi:10.1016/j.solmat.2012.01.009
  16. Bradshaw, 1990, High-temperature stability of ternary nitrate molten salts for solar thermal energy systems, Sol Energy Mater, 21, 51, 10.1016/0165-1633(90)90042-Y · doi:10.1016/0165-1633(90)90042-y
  17. Fernández AG, Ushak S, Galleguillos H, Pérez FJ. Development of new molten salts with LiNO3 and Ca(NO3)2 for energy storage in CSP plants. Appl Energy 2014:119;131–140. 10.1016/j.apeneergy.2013.12.061. · doi:10.1016/j.apenergy.2013.12.061
  18. Olivares, 2012, The thermal stability of molten lithium–sodium–potassium carbonate and the influence of additives on the melting point, J Sol Energy Eng, 134, 10.1115/1.4006895 · DOI
  19. Zalba, 2003, Review on thermal energy storage with phase change: materials, heat transfer analysis and applications, Appl Therm Eng, 23, 251, 10.1016/S1359-4311(02)00192-8 · DOI · Paper page
  20. Shamberger, 2012, Thermophysical properties of lithium nitrate trihydrate from (253 to 353)K, J Chem Eng Data, 57, 1404, 10.1021/je3000469 · DOI
  21. Ge, 2014, Carbonate-salt-based composite materials for medium- and high-temperature thermal energy storage, Particuology, 15, 77, 10.1016/j.partic.2013.09.002 · DOI
  22. Cot-Gores J, Castell A, Cabeza LF. Thermochemical energy storage and conversion: a-state-of-the-art review of the experimental research under practical conditions. Renewable Sustainable Energy Rev 2012:16;5207–5224. 10.1016/j.rser.2012.04.007. · DOI
  23. Kiplagat JK, Wang RZ, Oliveira RG, Li TX. Lithium chloride-expanded graphite composite sorbent for solar powered ice maker. Sol Energy 2010;84:1587–1594. 10.1016/j.solener.2010.06.014. · doi:10.1016/j.solener.2010.06.014
  24. Haije, 2007, Solid/vapour sorption heat transformer: design and performance, Appl Therm Eng, 7, 1371, 10.1016/j.applthermaleng.2006.10.022 · DOI
  25. Ishitobi, 2013, Dehydration and hydration behavior of metal-salt-modified materials for chemical heat pumps, Appl Therm Eng, 50, 10.1016/j.applthermaleng.2011.07.020 · DOI

Cited by

See all 128

Metadata

Authors
Cabeza, L. F., Gutierrez, A., Barreneche, C., Ushak, S., Fernández, Á. G., Inés Fernádez, A., & Grágeda, M.
Venue
Renewable and Sustainable Energy Reviews
Publisher
Elsevier BV
Published
2015-02
Volume
42
Pages
1106-1112
ISSN
1364-0321 (ISSN-L)
OpenAlex
W2046329130
Cited by
128
References
3
FWCI
10.91
Type
journal article
Language
en
Open access
green
Licence
www.elsevier.com/tdm/userlicense/1.0/ (tdm)
Funders
  • Spanish Project (ENE2011-22722, ENE2011-28269-C03-02)
  • European Union׳s Seventh Framework Programme (FP7/2007-2013)
  • FONDECYT (1120422)
  • FONDAP SERC-Chile (15110019)

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.