The DOI matches its Crossref record; 53 of the 53 references it cites were found in a registry or an index.
Optics for concentrating photovoltaics: Trends, limits and opportunities for materials and design
Open accessAbstract
Concentrating photovoltaic (CPV) systems are a key step in expanding the use of solar energy. Solar cells can operate at increased efficiencies under higher solar concentration and replacing solar cells with optical devices to capture light is an effective method of decreasing the cost of a system without compromising the amount of solar energy absorbed. However, CPV systems are still in a stage of development where new designs, methods and materials are still being created in order to reach a low levelled cost of energy comparable to standard silicon based PV systems. This article outlines the different types of concentration photovoltaic systems, their various design advantages and limitations, and noticeable trends. This will include comparisons on materials used, optical efficiency and optical tolerance (acceptance angle). As well as reviewing the recent development in the most commonly used and most established designs such as the Fresnel lens and parabolic trough/dish, novel optics and materials are also suggested. The aim of this review is to provide the reader with an understanding of the many types of solar concentrators and their reported advantages and disadvantages. This review should aid the development of solar concentrator optics by highlighting the successful trends and emphasising the importance of novel designs and materials in need of further research. There is a vast opportunity for solar concentrator designs to expand into other scientific fields and take advantage of these developed resources. Solar concentrator technologies have many layers and factors to be considered when designing. This review attempts to simplify and categorise these layers and stresses the significance of comparing as many of the applicable factors as possible when choosing the right design for an application. From this review, it has been ascertained that higher concentration levels are being achieved and will likely continue to increase as high performance high concentration designs are developed. Fresnel lenses have been identified as having a greater optical tolerance than reflective parabolic concentrators but more complex homogenisers are being developed for both system types which improve multiple performance factors. Trends towards higher performance solar concentrator designs include the use of micro-patterned structures and attention to detailed design such as tailoring secondary optics to primary optics and vice-versa. There is still a vast potential for what materials and surface structures could be utilised for solar concentrator designs especially if inspiration is taken from biological structures already proven to manipulate light in nature.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Nature’s hierarchical materials
Fratzl, P., & Weinkamer, R. (2007) · Progress in Materials Science · doi:10.1016/j.pmatsci.2007.06.001 · Cited by 2,800
Applications of hybrid organic–inorganic nanocomposites
Sanchez, C., Julián, B., Belleville, P., & Popall, M. (2005) · Journal of Materials Chemistry · doi:10.1039/b509097k · Cited by 2,636
Photonic structures in biology
Vukusic, P., & Sambles, J. R. (2003) · Nature · doi:10.1038/nature01941 · Cited by 1,935
A review of solar photovoltaic levelized cost of electricity
Branker, K., Pathak, M. J. M., & Pearce, J. M. (2011) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2011.07.104 · Cited by 1,470
Carbon nanomaterials for electronics, optoelectronics, photovoltaics, and sensing
Jariwala, D., Sangwan, V. K., Lauhon, L. J., Marks, T. J., & Hersam, M. C. (2013) · Chem. Soc. Rev. · doi:10.1039/c2cs35335k · Cited by 1,284
Manufacturing and measurement of freeform optics
Fang, F. Z., Zhang, X. D., Weckenmann, A., Zhang, G. X., & Evans, C. (2013) · CIRP Annals · doi:10.1016/j.cirp.2013.05.003 · Cited by 823
(2006) · Advanced Energy Materials · doi:10.1002/(issn)1614-6840 · Cited by 728
Organic Chemistry within Ceramic Matrixes: Doped Sol-Gel Materials
Avnir, D. (1995) · Accounts of Chemical Research · doi:10.1021/ar00056a002 · Cited by 616
Morpho butterfly wing scales demonstrate highly selective vapour response
Potyrailo, R. A., Ghiradella, H., Vertiatchikh, A., Dovidenko, K., Cournoyer, J. R., & Olson, E. (2007) · Nature Photonics · doi:10.1038/nphoton.2007.2 · Cited by 562
Concentrated solar energy applications using Fresnel lenses: A review
Xie, W., Dai, Y., Wang, R. Z., & Sumathy, K. (2011) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2011.03.031 · Cited by 539
Cited by
Gunawan, D., Zhang, J., Li, Q., Toe, C. Y., Scott, J., Antonietti, M., Guo, J., & Amal, R. (2024) · Advanced Materials · doi:10.1002/adma.202404618 · Cited by 325
Metadata
- Authors
- Shanks, K., Senthilarasu, S., & Mallick, T. K.
- Venue
- Renewable and Sustainable Energy Reviews
- Publisher
- Elsevier BV
- Published
- 2016-07
- Volume
- 60
- Pages
- 394-407
- ISSN
- 1364-0321 (ISSN-L)
- OpenAlex
- W2288502481
- Cited by
- 307
- References
- 53
- FWCI
- 14.18
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Optics for concentrating photovoltaics: Trends, limits and opportunities for materials and design. https://app.cochat.ai/papers/10.1016/j.rser.2016.01.089
- The paper
- Shanks, K., Senthilarasu, S., & Mallick, T. K. (2016). Optics for concentrating photovoltaics: Trends, limits and opportunities for materials and design. Renewable and Sustainable Energy Reviews. https://doi.org/10.1016/j.rser.2016.01.089
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.