CoChat

Performance and exhaust emissions of diesel engines using microalgae FAME and the prospects for microalgae HTL biocrude

Open access
Hossain, Farhad M., Rainey, Thomas J., Ristovski, Zoran, Brown, Richard J. · 2018 · Renewable and Sustainable Energy Reviews
Cited by 53

The DOI matches its Crossref record; 14 of the 14 references it cites were found in a registry or an index.

Abstract

Microalgae's potential as a third generation biofuel has attracted recent attention. Two key methods for obtaining biofuel from microalgae are compared and contrasted, namely solvent extraction followed by transesterification , producing Fatty Acid Methyl Esters (FAME) biodiesel , and hydrothermal liquefaction (HTL) to producing biocrude . The resulting differences in physicochemical characteristics affect engine performance and emissions as well as engine selection. Most microalgae engine research has been conducted on high speed diesel engines to investigate the performance and exhaust emissions of FAME whereas the HTL literature has mostly presumed biocrude would be upgraded for similar engines. However, growing awareness of the significant contribution of shipping emissions to public health brings into focus alternatives to heavy fuel oil (HFO) for low speed diesel (marine) engines. Such engines are thermodynamically very similar to high speed diesel engines but have the economic advantage that they can use low cost, high density fuels such as HFO/HTL. Microalgae FAME contains 10.5–11% (wt) oxygen and 36.2–39.2 MJ/kg calorific value , (10–15% lower than for petroleum diesel). High speed diesel engines tests using microalgae FAME generally decrease particulate emissions with a small penalty in engine power owing to the high oxygen content and lower Higher Heating Value (HHV). Conversely, biocrude obtained by HTL from green freshwater microalgae contained 10–11% (wt) oxygen, 4–8% (wt) nitrogen and 32–35 MJ/kg calorific value (20–27% lower than for petroleum diesel). HTL biocrude would be expected to reduce emissions for low speed marine diesel engines compared to HFO, especially soot emissions due to their very low sulphur content , although NO x emissions may increase. HTL biocrude may reduce the engine performance (output power) compared to HFO due to the higher oxygen content and lower HHV. This review’ aim is to compare microalgae FAME and HTL biocrude and their suitability for diesel engines regarding engine performance and emissions .

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1016/j.rser.2017.06.026

Cites

14 of 14 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Cited by

See all 53

Metadata

Authors
Hossain, F. M., Rainey, T. J., Ristovski, Z., & Brown, R. J.
Venue
Renewable and Sustainable Energy Reviews
Publisher
Elsevier BV
Published
2018-02
Volume
82
Pages
4269-4278
ISSN
1364-0321 (ISSN-L)
OpenAlex
W2626886762
Cited by
53
References
14
FWCI
2.21
Type
journal article
Language
en
Open access
hybrid

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.