The DOI matches its Crossref record; 141 of the 141 references it cites were found in a registry or an index.
Microwave assisted preparation of activated carbon from biomass: A review
Abstract
Abstract Activated carbon has been widely used as adsorbents, catalyst support and energy storage materials. Microwave heating is a promising technique for thermochemical treatment and activation of activated carbons due to its fast, selective, uniform and volumetric heating. Previous reviews mainly focused on specific feedstocks (e.g. agricultural biomass or oil palm wastes) or ignored important parameters for microwave activation (e.g. mass of activated carbon precursor). Characteristics of activated carbons prepared from conventional and microwave treatment were not compared and economics of microwave activation were not described in previous studies. This paper presentst a state of the art review of activation under microwave irradiation for various biomass sources (e.g. agricultural wastes, woody biomass and sewage sludge). Characteristics of microwave heating, main activation parameters, research progress and technology status of activated carbon preparation and regeneration under microwave irradiation are investigated with key challenges and economics being addressed. Characteristics of activated carbons made from microwave irradiation and conventional activation are compared and the advantages of microwave-assisted preparation are highlighted. It shows that the BET (Brunauer–Emmett–Teller) surface area, iodine number, methylene blue adsorption capacity and the yield of activated carbons under microwave irradiation are up to 2500–3000 m2/g, 1800–2200 mg/g, 500–700 mg/g and 13–96 wt%, respectively, competitive with conventional methods on the quality of activated carbons and process economics. Potential applications and future perspectives are described with pertinent information on activated carbon preparation under microwave irradiation.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Non-conventional low-cost adsorbents for dye removal: A review
CRINI, G. (2006) · Bioresource Technology · doi:10.1016/j.biortech.2005.05.001 · Cited by 4,508
Metallurgical recovery of metals from electronic waste: A review
Cui, J., & Zhang, L. (2008) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2008.02.001 · Cited by 1,770
Agricultural residues as precursors for activated carbon production—A review
Ioannidou, O., & Zabaniotou, A. (2007) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2006.03.013 · Cited by 1,528
Microwave versus conventional sintering: A review of fundamentals, advantages and applications
Oghbaei, M., & Mirzaee, O. (2010) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2010.01.068 · Cited by 1,270
Microwave heating processes involving carbon materials
Menéndez, J. A., Arenillas, A., Fidalgo, B., Fernández, Y., Zubizarreta, L., Calvo, E. G., & Bermúdez, J. M. (2010) · Fuel Processing Technology · doi:10.1016/j.fuproc.2009.08.021 · Cited by 1,092
Biochar: A synthesis of its agronomic impact beyond carbon sequestration
Spokas, K. A., Cantrell, K. B., Novak, J. M., Archer, D. W., Ippolito, J. A., Collins, H. P., Boateng, A. A., Lima, I. M., Lamb, M. C., McAloon, A. J., et al. (2012) · Journal of Environmental Quality · doi:10.2134/jeq2011.0069 · Cited by 1,014
Microwave assisted synthesis – a critical technology overview
Nüchter, M., Ondruschka, B., Bonrath, W., & Gum, A. (2004) · Green Chem. · doi:10.1039/b310502d · Cited by 906
Tan, X.-F., Liu, S.-B., Liu, Y.-G., Gu, Y.-L., Zeng, G.-M., Hu, X.-J., Wang, X., Liu, S.-H., & Jiang, L.-H. (2017) · Bioresource Technology · doi:10.1016/j.biortech.2016.12.083 · Cited by 711
Self-citationAygün, A., Yenisoy-Karakaş, S., & Duman, I. (2003) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2003.08.028 · Cited by 695
Surface modification and characterisation of a coal-based activated carbon
Chingombe, P., Saha, B., & Wakeman, R. J. (2005) · Carbon · doi:10.1016/j.carbon.2005.06.021 · Cited by 665
Cited by
Heavy Metal Water Pollution: A Fresh Look about Hazards, Novel and Conventional Remediation Methods
Zamora-Ledezma, C., Negrete-Bolagay, D., Figueroa, F., Zamora-Ledezma, E., Ni, M., Alexis, F., & Guerrero, V. H. (2021) · Environmental Technology & Innovation · doi:10.1016/j.eti.2021.101504 · Cited by 1,246
Foong, S. Y., Liew, R. K., Yang, Y., Cheng, Y. W., Yek, P. N. Y., Wan Mahari, W. A., Lee, X. Y., Han, C. S., Vo, D.-V. N., Van Le, Q., et al. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.124401 · Cited by 749
Jjagwe, J., Olupot, P. W., Menya, E., & Kalibbala, H. M. (2021) · Journal of Bioresources and Bioproducts · doi:10.1016/j.jobab.2021.03.003 · Cited by 616
Removal of heavy metals from aqueous solution using carbon-based adsorbents: A review
Duan, C., Ma, T., Wang, J., & Zhou, Y. (2020) · Journal of Water Process Engineering · doi:10.1016/j.jwpe.2020.101339 · Cited by 533
Kumar, A., Kuang, Y., Liang, Z., & Sun, X. (2020) · Materials Today Nano · doi:10.1016/j.mtnano.2020.100076 · Cited by 455
Verma, C., Ebenso, E. E., Quraishi, M. A., & Hussain, C. M. (2021) · Materials Advances · doi:10.1039/d0ma00681e · Cited by 435
Recent advances and challenges in biomass-derived porous carbon nanomaterials for supercapacitors
Li, Z., Guo, D., Liu, Y., Wang, H., & Wang, L. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.125418 · Cited by 396
Self-citationLignin materials for adsorption: Current trend, perspectives and opportunities
Supanchaiyamat, N., Jetsrisuparb, K., Knijnenburg, J. T. N., Tsang, D. C. W., & Hunt, A. J. (2019) · Bioresource Technology · doi:10.1016/j.biortech.2018.09.139 · Cited by 378
Reza, M. S., Yun, C. S., Afroze, S., Radenahmad, N., Bakar, M. S. A., Saidur, R., Taweekun, J., & Azad, A. K. (2020) · Arab Journal of Basic and Applied Sciences · doi:10.1080/25765299.2020.1766799 · Cited by 374
Hydrochar: A Review on Its Production Technologies and Applications
Masoumi, S., Borugadda, V. B., Nanda, S., & Dalai, A. K. (2021) · Catalysts · doi:10.3390/catal11080939 · Cited by 363
“Chemical activation is carried out over the impregnation of bio/hydrochar with one or a mixture of chemical agents (e.g., acids, oxidizing agents or alkaline solutions), followed by an activation process in a fixed-bed reactor under nitrogen flow rate [69].”
MethodAmalina, F., Razak, A. S. A., Krishnan, S., Sulaiman, H., Zularisam, A. W., & Nasrullah, M. (2022) · Journal of Hazardous Materials Advances · doi:10.1016/j.hazadv.2022.100134 · Cited by 349
Tee, G. T., Gok, X. Y., & Yong, W. F. (2022) · Environmental Research · doi:10.1016/j.envres.2022.113248 · Cited by 346
Ge, S., Yek, P. N. Y., Cheng, Y. W., Xia, C., Wan Mahari, W. A., Liew, R. K., Peng, W., Yuan, T.-Q., Tabatabaei, M., Aghbashlo, M., et al. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2020.110148 · Cited by 329
Guan, H., Wang, Q., Wu, X., Pang, J., Jiang, Z., Chen, G., Dong, C., Wang, L., & Gong, C. (2021) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2020.108562 · Cited by 328
Challenges and opportunities in microwave-assisted catalytic pyrolysis of biomass: A review
Ren, X., Shanb Ghazani, M., Zhu, H., Ao, W., Zhang, H., Moreside, E., Zhu, J., Yang, P., Zhong, N., & Bi, X. (2022) · Applied Energy · doi:10.1016/j.apenergy.2022.118970 · Cited by 272
Self-citationLiang, W., Wang, G., Peng, C., Tan, J., Wan, J., Sun, P., Li, Q., Ji, X., Zhang, Q., Wu, Y., et al. (2022) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2021.127993 · Cited by 264
Cuong, D. V., Matsagar, B. M., Lee, M., Hossain, M. S. A., Yamauchi, Y., Vithanage, M., Sarkar, B., Ok, Y. S., Wu, K. C.-W., & Hou, C.-H. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2021.111029 · Cited by 205
Kumar, V., & Dwivedi, S. K. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2021.126229 · Cited by 192
Technical challenges in scaling up the microwave technology for biomass processing
Siddique, I. J., Salema, A. A., Antunes, E., & Vinu, R. (2022) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2021.111767 · Cited by 189
Amalina, F., Syukor Abd Razak, A., Krishnan, S., Sulaiman, H., Zularisam, A. W., & Nasrullah, M. (2022) · Cleaner Materials · doi:10.1016/j.clema.2022.100137 · Cited by 166
Kumar Mishra, R., Singh, B., & Acharya, B. (2024) · Carbon Resources Conversion · doi:10.1016/j.crcon.2024.100228 · Cited by 132
Masoumi, S., & Dalai, A. K. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.121427 · Cited by 122
Rex, P., Mohammed Ismail, K., Meenakshisundaram, N., Barmavatu, P., & Sai Bharadwaj, A. (2023) · ChemEngineering · doi:10.3390/chemengineering7030050 · Cited by 74
Biomass-Derived Porous Carbon from Agar as an Anode Material for Lithium-Ion Batteries
Issatayev, N., Kalimuldina, G., Nurpeissova, A., & Bakenov, Z. (2021) · Nanomaterials · doi:10.3390/nano12010022 · Cited by 33
Metadata
- Authors
- Ao, W., Fu, J., Mao, X., Kang, Q., Ran, C., Liu, Y., Zhang, H., Gao, Z., Li, J., Liu, G., & Dai, J.
- Venue
- Renewable and Sustainable Energy Reviews
- Publisher
- Elsevier BV
- Published
- 2018-09
- Volume
- 92
- Pages
- 958-979
- ISSN
- 1364-0321 (ISSN-L)
- OpenAlex
- W2804483032
- Cited by
- 569
- References
- 141
- FWCI
- 18.03
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.