The DOI matches its Crossref record; 113 of the 113 references it cites were found in a registry or an index.
A review of phase change material and performance enhancement method for latent heat storage system
Abstract
Abstract Latent heat storage (LHS) is considered as the most promising technique for thermal energy storage, due to its high energy storage density and nearly constant working temperature. However, the lower thermal conductivity of the phase change material (PCM) used in LHS system seriously weakens thermal energy charging and discharging rates. In order to improve the thermal performance of LHS system, a lot of research on performance enhancement have been carried out. This review paper will concern on the development of PCMs and performance enhancement methods for LHS system in the last decade. The available enhancement methods can be classified into three categories: using high thermal conductivity additives and porous media to enhance PCM thermal conductivity, using finned tubes and encapsulated PCMs to extend heat transfer surface, using multistage or cascaded LHS technique and thermodynamic optimization to improving the heat transfer uniformity. The comparative reviews on PCMs, corresponding performance enhancement methods and their characteristics are presented in present paper. That will help in selecting reliable PCMs and matching suitable performance enhancement method to achieve the best thermal performance for PCM based LHS system. In addition, the research gaps in performance enhancement techniques for LHS systems are also discussed and some recommendations for future research are proposed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Review on thermal energy storage with phase change materials and applications
Sharma, A., Tyagi, V. V., Chen, C. R., & Buddhi, D. (2009) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2007.10.005 · Cited by 5,936
High-temperature phase change materials for thermal energy storage
Kenisarin, M. M. (2010) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2009.11.011 · Cited by 1,192
Thermal conductivity enhancement of phase change materials for thermal energy storage: A review
Fan, L., & Khodadadi, J. M. (2011) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2010.08.007 · Cited by 1,003
Sarı, A., & Karaipekli, A. (2007) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2006.11.004 · Cited by 978
Entransy—A physical quantity describing heat transfer ability
Guo, Z.-Y., Zhu, H.-Y., & Liang, X.-G. (2007) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2006.11.034 · Cited by 855
Performance enhancement in latent heat thermal storage system: A review
Jegadheeswaran, S., & Pohekar, S. D. (2009) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2009.06.024 · Cited by 702
Ibrahim, N. I., Al-Sulaiman, F. A., Rahman, S., Yilbas, B. S., & Sahin, A. Z. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.01.169 · Cited by 580
Al-Abidi, A. A., Mat, S., Sopian, K., Sulaiman, M. Y., & Mohammad, A. T. (2013) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2013.01.011 · Cited by 562
Cárdenas, B., & León, N. (2013) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2013.07.028 · Cited by 496
Kim, S., & Drzal, L. T. (2009) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2008.09.010 · Cited by 452
Thermal performance enhancement of shell and tube Latent Heat Storage Unit using longitudinal fins
Rathod, M. K., & Banerjee, J. (2015) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2014.10.074 · Cited by 427
Wang, Z., Zhang, Z., Jia, L., & Yang, L. (2015) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.01.009 · Cited by 425
A nano-graphite/paraffin phase change material with high thermal conductivity
Li, M. (2013) · Applied Energy · doi:10.1016/j.apenergy.2013.01.031 · Cited by 421
Thermal conductivity enhancement of phase change materials for thermal energy storage: A review
Liu, L., Su, D., Tang, Y., & Fang, G. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.04.057 · Cited by 410
Liu, Z., Yao, Y., & Wu, H. (2013) · Applied Energy · doi:10.1016/j.apenergy.2013.02.022 · Cited by 405
Wang, J., Xie, H., Xin, Z., Li, Y., & Chen, L. (2010) · Solar Energy · doi:10.1016/j.solener.2009.12.004 · Cited by 395
Xiao, X., Zhang, P., & Li, M. (2014) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2014.03.006 · Cited by 391
Cascaded latent heat storage for parabolic trough solar power plants
Michels, H., & Pitz-Paal, R. (2007) · Solar Energy · doi:10.1016/j.solener.2006.09.008 · Cited by 373
Regin, A. F., Solanki, S. C., & Saini, J. S. (2009) · Renewable Energy · doi:10.1016/j.renene.2008.12.012 · Cited by 358
Karaipekli, A., & Sarı, A. (2008) · Renewable Energy · doi:10.1016/j.renene.2008.02.024 · Cited by 309
Tiari, S., Qiu, S., & Mahdavi, M. (2015) · Energy Conversion and Management · doi:10.1016/j.enconman.2014.10.053 · Cited by 296
Koca, A., Oztop, H. F., Koyun, T., & Varol, Y. (2007) · Renewable Energy · doi:10.1016/j.renene.2007.03.012 · Cited by 287
Heat transfer enhancement of phase change composite material: Copper foam/paraffin
Wang, C., Lin, T., Li, N., & Zheng, H. (2016) · Renewable Energy · doi:10.1016/j.renene.2016.04.039 · Cited by 278
Sharma, R. K., Ganesan, P., Tyagi, V. V., Metselaar, H. S. C., & Sandaran, S. C. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.01.130 · Cited by 265
Sarı, A., Alkan, C., & Bilgin, C. (2014) · Applied Energy · doi:10.1016/j.apenergy.2014.09.047 · Cited by 258
Phase change materials and carbon nanostructures for thermal energy storage: A literature review
Amaral, C., Vicente, R., Marques, P. A. A. P., & Barros-Timmons, A. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.05.093 · Cited by 248
Tao, Y. B., Lin, C. H., & He, Y. L. (2015) · Energy Conversion and Management · doi:10.1016/j.enconman.2015.03.051 · Cited by 242
Self-citationHeat transfer enhancement of paraffin wax using graphite foam for thermal energy storage
Zhong, Y., Guo, Q., Li, S., Shi, J., & Liu, L. (2010) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2010.02.004 · Cited by 234
Alam, T. E., Dhau, J. S., Goswami, D. Y., & Stefanakos, E. (2015) · Applied Energy · doi:10.1016/j.apenergy.2015.04.086 · Cited by 224
Comparison between the single-PCM and multi-PCM thermal energy storage design
Aldoss, T. K., & Rahman, M. M. (2014) · Energy Conversion and Management · doi:10.1016/j.enconman.2014.03.047 · Cited by 217
Tao, Y. B., You, Y., & He, Y. L. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.10.016 · Cited by 216
Self-citationExperimental and numerical evaluation of longitudinally finned latent heat thermal storage systems
Hosseini, M. J., Ranjbar, A. A., Rahimi, M., & Bahrampoury, R. (2015) · Energy and Buildings · doi:10.1016/j.enbuild.2015.04.045 · Cited by 214
Peiró, G., Gasia, J., Miró, L., & Cabeza, L. F. (2015) · Renewable Energy · doi:10.1016/j.renene.2015.05.029 · Cited by 211
Li, T., Lee, J.-H., Wang, R., & Kang, Y. T. (2013) · Energy · doi:10.1016/j.energy.2013.04.010 · Cited by 210
Effects of different multiple PCMs on the performance of a latent thermal energy storage system
Fang, M., & Chen, G. (2007) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2006.08.001 · Cited by 210
Nano-enhanced phase change materials for improved building performance
Ma, Z., Lin, W., & Sohel, M. I. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.12.234 · Cited by 207
Thermal performance of a multiple PCM thermal storage unit for free cooling
Mosaffa, A. H., Infante Ferreira, C. A., Talati, F., & Rosen, M. A. (2013) · Energy Conversion and Management · doi:10.1016/j.enconman.2012.10.018 · Cited by 206
Tao, Y. B., & He, Y. L. (2015) · Applied Energy · doi:10.1016/j.apenergy.2015.01.008 · Cited by 199
Self-citationFukahori, R., Nomura, T., Zhu, C., Sheng, N., Okinaka, N., & Akiyama, T. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.02.106 · Cited by 196
Zhao, D., & Tan, G. (2015) · Applied Energy · doi:10.1016/j.apenergy.2014.10.051 · Cited by 193
Nitrate salts doped with CuO nanoparticles for thermal energy storage with improved heat transfer
Myers, P. D., Alam, T. E., Kamal, R., Goswami, D. Y., & Stefanakos, E. (2016) · Applied Energy · doi:10.1016/j.apenergy.2015.11.045 · Cited by 192
Micro/nano-encapsulated n-heptadecane with polystyrene shell for latent heat thermal energy storage
Sarı, A., Alkan, C., Döğüşcü, D. K., & Biçer, A. (2014) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2014.03.023 · Cited by 189
Choi, D. H., Lee, J., Hong, H., & Kang, Y. T. (2014) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2014.02.004 · Cited by 187
Murray, R. E., & Groulx, D. (2014) · Renewable Energy · doi:10.1016/j.renene.2013.08.007 · Cited by 182
Zhao, W., France, D. M., Yu, W., Kim, T., & Singh, D. (2014) · Renewable Energy · doi:10.1016/j.renene.2014.03.031 · Cited by 182
Huang, Z., Gao, X., Xu, T., Fang, Y., & Zhang, Z. (2014) · Applied Energy · doi:10.1016/j.apenergy.2013.11.019 · Cited by 178
Shon, J., Kim, H., & Lee, K. (2014) · Applied Energy · doi:10.1016/j.apenergy.2013.07.049 · Cited by 167
Mehrali, M., Latibari, S. T., Mehrali, M., Mahlia, T. M. I., Sadeghinezhad, E., & Metselaar, H. S. C. (2014) · Applied Energy · doi:10.1016/j.apenergy.2014.08.100 · Cited by 165
Thermal investigation of PCM-based high temperature thermal energy storage in packed bed
Peng, H., Dong, H., & Ling, X. (2014) · Energy Conversion and Management · doi:10.1016/j.enconman.2014.02.052 · Cited by 165
Bellan, S., Alam, T. E., González‐Aguilar, J., Romero, M., Rahman, M. M., Goswami, D. Y., & Stefanakos, E. K. (2015) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.07.056 · Cited by 164
Babapoor, A., & Karimi, G. (2015) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.07.083 · Cited by 161
Performance enhancement of a solar dynamic LHTS module having both fins and multiple PCMs
Seeniraj, R. V., & Narasimhan, N. L. (2007) · Solar Energy · doi:10.1016/j.solener.2007.11.001 · Cited by 159
Wu, M., Xu, C., & He, Y. (2015) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.10.014 · Cited by 153
Self-citationTiari, S., Qiu, S., & Mahdavi, M. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.04.025 · Cited by 150
Energy and exergy performance assessments for latent heat thermal energy storage systems
Li, G. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.06.052 · Cited by 147
Analysis and optimization of a latent thermal energy storage system with embedded heat pipes
Nithyanandam, K., & Pitchumani, R. (2011) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2011.06.018 · Cited by 146
Sarı, A., Alkan, C., Döğüşcü, D. K., & Kızıl, Ç. (2015) · Solar Energy · doi:10.1016/j.solener.2015.02.035 · Cited by 146
Micro/nanoencapsulated n-nonadecane with poly(methyl methacrylate) shell for thermal energy storage
Sarı, A., Alkan, C., Biçer, A., Altuntaş, A., & Bilgin, C. (2014) · Energy Conversion and Management · doi:10.1016/j.enconman.2014.05.092 · Cited by 145
Shabgard, H., Robak, C. W., Bergman, T. L., & Faghri, A. (2012) · Solar Energy · doi:10.1016/j.solener.2011.12.008 · Cited by 144
Wu, S., Li, T., Yan, T., Dai, Y., & Wang, R. Z. (2016) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2016.06.066 · Cited by 142
Xiao, X., Zhang, P., & Li, M. (2015) · Energy Conversion and Management · doi:10.1016/j.enconman.2015.07.074 · Cited by 140
Entransy flux of thermal radiation and its application to enclosures with opaque surfaces
Cheng, X., & Liang, X. (2010) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2010.08.026 · Cited by 133
Tiari, S., & Qiu, S. (2015) · Energy Conversion and Management · doi:10.1016/j.enconman.2015.08.004 · Cited by 130
Dhaidan, N. S., & Khodadadi, J. M. (2017) · Journal of Renewable and Sustainable Energy · doi:10.1063/1.4989738 · Cited by 128
Second law analysis of latent thermal storage for solar system
Kousksou, T., Strub, F., Castaing-Lasvignottes, J., Jamil, A., & Bédécarrats, J.-P. (2007) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2007.04.029 · Cited by 125
Xia, L., & Zhang, P. (2011) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2011.03.031 · Cited by 124
Bellan, S., González‐Aguilar, J., Romero, M., Rahman, M. M., Goswami, D. Y., Stefanakos, E. K., & Couling, D. (2014) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2014.07.009 · Cited by 122
Sarı, A., Alkan, C., & Altıntaş, A. (2014) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2014.09.005 · Cited by 118
Multistage latent heat cold thermal energy storage design analysis
Chiu, J. N., & Martin, V. (2013) · Applied Energy · doi:10.1016/j.apenergy.2013.01.054 · Cited by 116
Xu, T., Chen, Q., Huang, G., Zhang, Z., Gao, X., & Lu, S.-S. (2016) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2016.06.003 · Cited by 116
Li, T., Lee, J.-H., Wang, R. Z., & Kang, Y. T. (2014) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2014.03.054 · Cited by 113
Tao, Y. B., He, Y. L., & Qu, Z. (2012) · Solar Energy · doi:10.1016/j.solener.2012.01.004 · Cited by 113
Self-citationLiang, W., Zhang, G., Sun, H., Chen, P., Zhu, Z., & Li, A. (2014) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2014.09.032 · Cited by 112
Thermal and exergetic analysis of Metal Foam-enhanced Cascaded Thermal Energy Storage (MF-CTES)
Tian, Y., & Zhao, C. (2012) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2012.11.034 · Cited by 112
Singh, D., Kim, T., Zhao, W., Yu, W., & France, D. M. (2016) · Renewable Energy · doi:10.1016/j.renene.2016.03.090 · Cited by 112
Li, M., Chen, M., Wu, Z., & Liu, J. (2014) · Energy Conversion and Management · doi:10.1016/j.enconman.2014.04.002 · Cited by 110
Zhao, Y., Zhao, C., Xu, Z. G., & Xu, H. (2016) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2016.03.076 · Cited by 109
Bhagat, K., & Saha, S. K. (2016) · Renewable Energy · doi:10.1016/j.renene.2016.04.018 · Cited by 109
Zauner, C., Hengstberger, F., Etzel, M., Lager, D., Hofmann, R., & Walter, H. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.06.138 · Cited by 106
Energy and exergy evaluation of a multiple-PCM thermal storage unit for free cooling applications
Mosaffa, A. H., Farshi, L. G., Ferreira, C. A. I., & Rosen, M. A. (2014) · Renewable Energy · doi:10.1016/j.renene.2014.02.025 · Cited by 105
Wang, W., Wang, L.-B., & He, Y. (2015) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.08.108 · Cited by 103
Self-citationLi, X., Wei, H., Lin, X., & Xie, X. (2016) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2016.04.057 · Cited by 99
Discharging process expedition of NEPCM in fin-assisted Latent Heat Thermal Energy Storage System
Lohrasbi, S., Sheikholeslami, M., & Ganji, D. D. (2016) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2016.06.044 · Cited by 98
Li, Y. Q., He, Y. L., Song, H.-J., Xu, C., & Wang, W. W. (2013) · Renewable Energy · doi:10.1016/j.renene.2013.03.022 · Cited by 96
Self-citationLv, Y., Zhou, W., & Jin, W. (2015) · Energy and Buildings · doi:10.1016/j.enbuild.2015.11.042 · Cited by 95
Performance assessment of heat storage by phase change materials containing MWCNTs and graphite
Teng, T.-P., Cheng, C.-M., & Cheng, C.-P. (2012) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2012.07.002 · Cited by 93
Ji, P., Sun, H., Zhong, Y., & Feng, W. (2012) · Chemical Engineering Science · doi:10.1016/j.ces.2012.07.002 · Cited by 93
Manfrida, G., Secchi, R., & Stańczyk, K. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.06.135 · Cited by 93
Entropy generation analysis for the design improvement of a latent heat storage system
Guelpa, E., Sciacovelli, A., & Verda, V. (2013) · Energy · doi:10.1016/j.energy.2013.02.017 · Cited by 92
Dao, T. D., & Jeong, H. M. (2015) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2015.02.009 · Cited by 89
Performance optimization of two-stage latent heat storage unit based on entransy theory
Tao, Y. B., He, Y. L., Liu, Y. K., & Tao, W. (2014) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2014.05.049 · Cited by 89
Self-citationXu, H., & Zhao, C. (2015) · Energy · doi:10.1016/j.energy.2015.06.131 · Cited by 83
Encapsulated phase change materials for energy storage – Characterization by calorimetry
Zheng, Y., Zhao, W., Sabol, J. C., Tuzla, K., Neti, S., Öztekin, A., & Chen, J. C. (2012) · Solar Energy · doi:10.1016/j.solener.2012.10.003 · Cited by 79
Tao, Y. B., & Carey, V. P. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.06.140 · Cited by 76
Self-citationExperimental investigations of a latent heat energy storage unit using finned tubes
Kabbara, M., Groulx, D., & Joseph, A. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.12.080 · Cited by 74
Dannemand, M., Johansen, J. B., Kong, W., & Furbo, S. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.05.144 · Cited by 74
Singh, D., Zhao, W., Yu, W., France, D. M., & Kim, T. (2015) · Solar Energy · doi:10.1016/j.solener.2015.05.016 · Cited by 72
Ezra, M., Kozak, Y., Dubovsky, V., & Ziskind, G. (2015) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.09.040 · Cited by 72
Design of a latent thermal energy storage system with embedded heat pipes
Nithyanandam, K., & Pitchumani, R. (2014) · Applied Energy · doi:10.1016/j.apenergy.2014.03.025 · Cited by 71
An approach to entropy analysis of a latent heat storage module
Erek, A., & Dinçer, İ. (2007) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2007.08.002 · Cited by 71
Wang, X., Guo, Q., Zhong, Y., Wei, X., & Liu, L. (2012) · Renewable Energy · doi:10.1016/j.renene.2012.09.029 · Cited by 69
Xu, H., & Zhao, C. (2015) · Renewable Energy · doi:10.1016/j.renene.2015.08.007 · Cited by 68
Almsater, S., Saman, W. Y., & Bruno, F. (2015) · Renewable Energy · doi:10.1016/j.renene.2015.11.068 · Cited by 68
Xu, Y., He, Y., Li, Y., & Song, H.-J. (2015) · Solar Energy · doi:10.1016/j.solener.2015.09.021 · Cited by 67
Self-citationYang, C. Y., Navarro, M. E., Zhao, B., Leng, G., Xu, G., Wang, L., Jin, Y., & Ding, Y. (2016) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2016.02.022 · Cited by 65
Tao, Y. B., Lin, C. H., & He, Y. L. (2015) · Applied Energy · doi:10.1016/j.apenergy.2015.07.058 · Cited by 64
Self-citationDevelopment of highly conductive KNO3/NaNO3 composite for TES (thermal energy storage)
Zhao, Y. J., Wang, R. Z., Wang, L., & Yu, N. (2014) · Energy · doi:10.1016/j.energy.2014.03.127 · Cited by 59
Performance of suspended finned heat pipes in high-temperature latent heat thermal energy storage
Khalifa, A., Tan, L., Date, A., & Akbarzadeh, A. (2015) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.02.030 · Cited by 43
Numerical study on performance enhancement of shell-and-tube latent heat storage unit
Tao, Y. B., & He, Y. L. (2015) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2015.07.013 · Cited by 40
Self-citationShabgard, H., Bergman, T. L., & Faghri, A. (2013) · Energy · doi:10.1016/j.energy.2013.08.020 · Cited by 37
Robustness in the volume-to-point heat conduction optimization problem
Song, B., & Guo, Z.-Y. (2011) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2011.06.025 · Cited by 30
The heat transfer mechanism study of three-tank latent heat storage system based on entransy theory
Guo, J., & Huai, X. L. (2016) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2016.01.068 · Cited by 23
Numerical studies on the performance enhancement of an encapsulated thermal storage unit
Narasimhan, N. L., Bharath, R., Ramji, S. A., Tarun, M., & Arumugam, A. S. (2014) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2014.05.003 · Cited by 22
Cited by
Advances in thermal energy storage: Fundamentals and applications
Ali, H. M., Rehman, T.-U., Arıcı, M., Said, Z., Duraković, B., Mohammed, H. I., Kumar, R., Rathod, M. K., Buyukdagli, O., & Teggar, M. (2024) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2023.101109 · Cited by 457
Koçak, B., Fernandez, A. I., & Paksoy, H. (2020) · Solar Energy · doi:10.1016/j.solener.2020.08.081 · Cited by 416
Li, Z., Lu, Y., Huang, R., Chang, J., Yu, X., Jiang, R., Yu, X., & Roskilly, A. P. (2021) · Applied Energy · doi:10.1016/j.apenergy.2020.116277 · Cited by 342
Design of non-uniformly distributed annular fins for a shell-and-tube thermal energy storage unit
Yang, X., Guo, J., Yang, B., Cheng, H., Wei, P., & He, Y.-L. (2020) · Applied Energy · doi:10.1016/j.apenergy.2020.115772 · Cited by 309
Self-citationHe, Y.-L., Wang, K., Qiu, Y., Du, B.-C., Liang, Q., & Du, S. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.12.006 · Cited by 305
Self-citation
Metadata
- Authors
- Tao, Y. B., & He, Y.-L.
- Venue
- Renewable and Sustainable Energy Reviews
- Publisher
- Elsevier BV
- Published
- 2018-10
- Volume
- 93
- Pages
- 245-259
- ISSN
- 1364-0321 (ISSN-L)
- OpenAlex
- W2805563166
- Cited by
- 633
- References
- 113
- FWCI
- 32.46
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.