The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
A review of microencapsulated and composite phase change materials: Alteration of strength and thermal properties of cement-based materials
Open accessAbstract
Due to the population growth and the increased reliance on cooling and heating systems, buildings have become the largest energy consumer worldwide. The use of phase change material (PCM) has shown great potential to reduce the annual cooling and heating load by up to 50%. Nowadays, the direct incorporation of PCM in cement-based materials (CBM) is creating a considerable debate in the research community with regards to the proper selection and the beneficial utilization of PCM (microencapsulated or composite) in CBM. Therefore, this paper reviews the pros and cons of using microencapsulated and composite PCM in CBM by highlighting the mechanisms involved in the mechanical strength loss and thermal properties enhancement. Generally, a high thermal energy storage CBM was obtained. However, PCM exhibited a negative effect on the compressive strength of CBM. In view of the literature review, the compressive strength reduction varies considerably with no clear trend which is understandable in view of the differences in mix designs as well as the variety of materials used in each study. Finally, an up-to-date PCM case studies, gaps and future directions are also presented to provide a reliable basis and helpful reference for the future development of eco-friendly and energy-efficient building materials containing PCM.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
An overview of current status of carbon dioxide capture and storage technologies
Leung, D. Y. C., Caramanna, G., & Maroto-Valer, M. M. (2014) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2014.07.093 · Cited by 3,198
Lin, Y., Jia, Y., Alva, G., & Fang, G. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.10.002 · Cited by 910
Qureshi, Z. A., Ali, H. M., & Khushnood, S. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.08.049 · Cited by 697
Tauseef-ur-Rehman, Ali, H. M., Janjua, M. M., Sajjad, U., & Yan, W.-M. (2019) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2019.02.001 · Cited by 507
Potential of CO 2 sequestration through construction and demolition (C&D) waste—An overview
Kaliyavaradhan, S. K., & Ling, T.-C. (2017) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2017.05.014 · Cited by 255
Self-citationSage-Lauck, J. S., & Sailor, D. J. (2014) · Energy and Buildings · doi:10.1016/j.enbuild.2014.04.028 · Cited by 166
Cited by
Silica fume and waste glass in cement concrete production: A review
Mehta, A., & Ashish, D. K. (2020) · Journal of Building Engineering · doi:10.1016/j.jobe.2019.100888 · Cited by 438
Wu, M. Q., Wu, S., Cai, Y. F., Wang, R. Z., & Li, T. X. (2021) · Energy Storage Materials · doi:10.1016/j.ensm.2021.07.019 · Cited by 409
Chen, X., Tang, Z., Gao, H., Chen, S., & Wang, G. (2020) · iScience · doi:10.1016/j.isci.2020.101208 · Cited by 98
Ji, K., Wi, S., Jun, H., Suh, J.-I., Song, H., & Yoon, J. (2025) · International Journal of Concrete Structures and Materials · doi:10.1186/s40069-025-00861-6 · Cited by 3
Metadata
- Authors
- Drissi, S., Ling, T.-C., Mo, K. H., & Eddhahak, A.
- Venue
- Renewable and Sustainable Energy Reviews
- Publisher
- Elsevier BV
- Published
- 2019-08
- Volume
- 110
- Pages
- 467-484
- ISSN
- 1364-0321 (ISSN-L)
- OpenAlex
- W2944840727
- Cited by
- 237
- References
- 6
- FWCI
- 14.24
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.