Evaluation of phase change materials for improving thermal comfort in a super-insulated residential building

ASHRAE Handbook—1981 Fundamentals

(1981) · Building Services Engineering Research and Technology · doi:10.1177/014362448100200409 · Cited by 3,398 · see citing works

A review on phase change materials integrated in building walls

Kuznik, F., David, D., Johannes, K., & Roux, J.-J. (2010) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2010.08.019 · Cited by 1,061 · see citing works

Phase change materials for building applications: A state-of-the-art review

Baetens, R., Jelle, B. P., & Gustavsen, A. (2010) · Energy and Buildings · doi:10.1016/j.enbuild.2010.03.026 · Cited by 1,006 · see citing works

Use of microencapsulated PCM in concrete walls for energy savings

Cabeza, L. F., Castellón, C., Nogués, M., Medrano, M., Leppers, R., & Zubillaga, O. (2006) · Energy and Buildings · doi:10.1016/j.enbuild.2006.03.030 · Cited by 890 · see citing works

Phase change material-based building architecture for thermal management in residential and commercial establishments

Pasupathy, A., Velraj, R., & Seeniraj, R. V. (2006) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2006.05.010 · Cited by 559 · see citing works

Re-inventing air heating: Convenient and comfortable within the frame of the Passive House concept

Feist, W., Schnieders, J., Dorer, V., & Haas, A. (2005) · Energy and Buildings · doi:10.1016/j.enbuild.2005.06.020 · Cited by 374 · see citing works

Dynamic characteristics and energy performance of buildings using phase change materials: A review

Zhu, N., Ma, Z., & Wang, S. (2009) · Energy Conversion and Management · doi:10.1016/j.enconman.2009.08.019 · Cited by 346 · see citing works

A review of indices for the long-term evaluation of the general thermal comfort conditions in buildings

Carlucci, S., & Pagliano, L. (2012) · Energy and Buildings · doi:10.1016/j.enbuild.2012.06.015 · Cited by 215 · see citing works

Improvement of the thermal behaviour of gypsum blocks by the incorporation of microcapsules containing PCMS obtained by suspension polymerization with an optimal core/coating mass ratio

Borreguero, A. M., Carmona, M., Sánchez-Silva, L., Valverde, J. L., & Rodríguez, J. F. (2010) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2010.01.032 · Cited by 159 · see citing works

Applications of Phase Change Material in highly energy-efficient houses

Rodríguez-Ubiñas, E., Ruiz-Valero, L., Sánchez, S. V., & Neila, J. (2012) · Energy and Buildings · doi:10.1016/j.enbuild.2012.03.018 · Cited by 157 · see citing works

Performance of phase change material boards under natural convection

Liu, H., & Awbi, H. (2008) · Building and Environment · doi:10.1016/j.buildenv.2008.12.002 · Cited by 115 · see citing works

Overheating in residential passive house: Solution strategies revealed and confirmed through data analysis and simulations

Mlakar, J., & Štrancar, J. (2011) · Energy and Buildings · doi:10.1016/j.enbuild.2011.02.008 · Cited by 115 · see citing works

Warm season cooling requirements for passive buildings in Southeastern Europe (Romania)

Bădescu, V., Laaser, N., & Crutescu, R. (2010) · Energy · doi:10.1016/j.energy.2010.04.013 · Cited by 73 · see citing works

On the thermal buffering of naturally ventilated buildings through internal thermal mass

Holford, J. M., & Woods, A. W. (2007) · Journal of Fluid Mechanics · doi:10.1017/s0022112007005320 · Cited by 61 · see citing works

Experimental Investigation of a Bio-Based Phase Change Material to Improve Building Energy Performance

Muruganantham, K., Phelan, P. E., Horwath, P., Vicente-Ludlam, D., & McDonald, T. (2010) · ASME International Conference on Energy Sustainability (ES) · doi:10.1115/es2010-90035 · Cited by 58 · see citing works

THE EFFECT OF MICROENCAPSULATED PHASE-CHANGE MATERIAL ON THE COMPRESSIVE STRENGTH OF STRUCTURAL CONCRETE

Norvell, C., Sailor, D. J., & Dusicka, P. (2013) · Journal of Green Building · doi:10.3992/jgb.8.3.116 · Cited by 52 · see citing works

MODELING PCM-ENHANCED INSULATION SYSTEM AND BENCHMARKING ENERGYPLUS AGAINST CONTROLLED FIELD DATA

Shrestha, S. S., Miller, W. A., Stovall, T. K., Desjarlais, A. O., Childs, K. W., Porter, W. D., Bhandari, M. S., & Coley, S. J. (2011) · OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) · Cited by 47 · see citing works

Phase change material cool storage for a Swedish Passive House

Persson, J., & Westermark, M. O. J. (2012) · Energy and Buildings · doi:10.1016/j.enbuild.2012.05.012 · Cited by 41 · see citing works

Experimental and numerical investigations on the effect of using phase change materials for energy conservation in residential buildings

Behzadi, S., & Farid, M. M. (2011) · Science and Technology for the Built Environment · doi:10.1080/10789669.2011.573052 · Cited by 40 · see citing works

Thermal Mass Design in Buildings – Heavy or Light?

Li, Y., & Xu, P. (2006) · International Journal of Ventilation · doi:10.1080/14733315.2006.11683731 · Cited by 34 · see citing works

Use of Phase-Change Materials as Passive Elements for Climatization Purposes in Summer: The Portuguese Case

Fernandes, N. T. A., & Costa, V. A. F. (2009) · International Journal of Green Energy · doi:10.1080/15435070902886585 · Cited by 18 · see citing works

Phase Change Materials as Thermal Storage for High Performance Homes

Campbell, K. R., & Sailor, D. J. (2011) · Volume 4: Energy Systems Analysis, Thermodynamics and Sustainability; Combustion Science and Engineering; Nanoengineering for Energy, Parts A and B · doi:10.1115/imece2011-63273 · Cited by 17 · see citing works

Modeling high-performance buildings

Tzempelikos, A., Braun, J. E., & Groll, E. A. (2011) · Science and Technology for the Built Environment · doi:10.1080/10789669.2011.576194 · Cited by 1 · see citing works

A review on phase change material (PCM) for sustainable passive cooling in building envelopes

Akeiber, H. J., Nejat, P., Majid, M. Z. A., Wahid, M. B. A., Jomehzadeh, F., Famileh, I. Z., Calautit, J. K., Hughes, B. R., & Zaki, S. A. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.03.036 · Cited by 1,082 · see citing works

Simulation-based optimization of PCM melting temperature to improve the energy performance in buildings

Saffari, M., de Gracia, Á., Fernández, C. C., & Cabeza, L. F. (2017) · Applied Energy · doi:10.1016/j.apenergy.2017.05.107 · Cited by 346 · see citing works

Passive thermal control in residential buildings using phase change materials

Kenisarin, M. M., & Mahkamov, K. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.10.128 · Cited by 296 · see citing works

Review on phase change materials for cold thermal energy storage applications

Nie, B., Palacios, A., Zou, B., Liu, J., Zhang, T., & Li, Y. (2020) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2020.110340 · Cited by 288 · see citing works

A review on phase change material application in building

Cui, Y., Xie, J., Liu, J., Wang, J. P., & Chen, S. (2017) · Advances in Mechanical Engineering · doi:10.1177/1687814017700828 · Cited by 243 · see citing works

Thermal performance of buildings integrated with phase change materials to reduce heat stress risks during extreme heatwave events

Ramakrishnan, S., Wang, X., Sanjayan, J., & Wilson, J. (2017) · Applied Energy · doi:10.1016/j.apenergy.2016.04.084 · Cited by 241 · see citing works

A review of microencapsulated and composite phase change materials: Alteration of strength and thermal properties of cement-based materials

Drissi, S., Ling, T., Mo, K. H., & Eddhahak, A. (2019) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2019.04.072 · Cited by 240 · see citing works

Passive cooling of buildings with phase change materials using whole-building energy simulation tools: A review

Saffari, M., de Gracia, Á., Ushak, S., & Cabeza, L. F. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.05.139 · Cited by 232 · see citing works

Advanced energy storage materials for building applications and their thermal performance characterization: A review

Khadiran, T., Hussein, M. Z., Zainal, Z., & Rusli, R. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.12.081 · Cited by 221 · see citing works

Energy savings due to the use of PCM for relocatable lightweight buildings passive heating and cooling in different weather conditions

Marín, P. E., Saffari, M., de Gracia, Á., Zhu, X., Farid, M. M., Cabeza, L. F., & Ushak, S. (2016) · Energy and Buildings · doi:10.1016/j.enbuild.2016.08.007 · Cited by 216 · see citing works

Economic impact of integrating PCM as passive system in buildings using Fanger comfort model

Saffari, M., de Gracia, Á., Ushak, S., & Cabeza, L. F. (2015) · Energy and Buildings · doi:10.1016/j.enbuild.2015.12.006 · Cited by 179 · see citing works

Resilient cooling strategies – A critical review and qualitative assessment

Zhang, C., Kazanci, O. B., Levinson, R., Heiselberg, P., Olesen, B. W., Chiesa, G., Sodagar, B., Ai, Z., Selkowitz, S., Zinzi, M., et al. (2021) · Energy and Buildings · doi:10.1016/j.enbuild.2021.111312 · Cited by 180 · see citing works

Effective PCM, insulation, natural and/or night ventilation techniques to enhance the thermal performance of buildings located in various climates – A review

Arumugam, P., Velraj, R., & Vellaichamy, P. (2022) · Energy and Buildings · doi:10.1016/j.enbuild.2022.111840 · Cited by 176 · see citing works

Parametric analysis of applying PCM wallboards for energy saving in high-rise lightweight buildings in Shanghai

Wang, H., Lu, W. J., Wu, Z., & Zhang, G. (2019) · Renewable Energy · doi:10.1016/j.renene.2019.05.124 · Cited by 169 · see citing works

Application of phase change materials in gypsum boards to meet building energy conservation goals

Sharifi, N. P., Shaikh, A. A. N., & Sakulich, A. R. (2016) · Energy and Buildings · doi:10.1016/j.enbuild.2016.12.046 · Cited by 146 · see citing works

Investigation of PCM as retrofitting option to enhance occupant thermal comfort in a modern residential building

Jamil, H., Alam, M., Sanjayan, J., & Wilson, J. (2016) · Energy and Buildings · doi:10.1016/j.enbuild.2016.09.064 · Cited by 136 · see citing works

Thermal performance and energy efficiency of building integrated with PCMs in hot desert climate region

Sovetova, M., Memon, S. A., & Kim, J. R. (2019) · Solar Energy · doi:10.1016/j.solener.2019.07.067 · Cited by 136 · see citing works

Phase change material (PCM) integrations into buildings in hot climates with simulation access for energy performance and thermal comfort: A review

Zhan, H., Mahyuddin, N., Sulaiman, R., & Khayatian, F. (2023) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2023.132312 · Cited by 133 · see citing works

Application of phase change material foam composites in the built environment: A critical review

Ikutegbe, C. A., & Farid, M. M. (2020) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2020.110008 · Cited by 132 · see citing works

Experimental study of the influence of thermal mass on thermal comfort and cooling energy demand in residential buildings

Kuczyński, T., & Staszczuk, A. (2020) · Energy · doi:10.1016/j.energy.2020.116984 · Cited by 131 · see citing works

Improving indoor thermal comfort by using phase change materials: A review

Abuelnuor, A. A. A., Omara, A. A. M., Saqr, K. M., & Elhag, I. H. I. (2018) · International Journal of Energy Research · doi:10.1002/er.4000 · Cited by 128 · see citing works

Influence of glazed roof containing phase change material on indoor thermal environment and energy consumption

Li, D., Wu, Y., Zhang, G., Arıcı, M., Liu, C., & Wang, F. (2018) · Applied Energy · doi:10.1016/j.apenergy.2018.04.015 · Cited by 125 · see citing works

Coupled EnergyPlus and CFD analysis of PCM for thermal management of buildings

Pandey, B., Banerjee, R., & Sharma, A. (2020) · Energy and Buildings · doi:10.1016/j.enbuild.2020.110598 · Cited by 125 · see citing works

Improving the energy efficiency of passive PCM system using controlled natural ventilation

Prabhakar, M., Saffari, M., de Gracia, Á., & Cabeza, L. F. (2020) · Energy and Buildings · doi:10.1016/j.enbuild.2020.110483 · Cited by 112 · see citing works

A study of the impact of occupant behaviors on energy performance of building envelopes using occupants’ data

Yousefi, F., Gholipour, Y., & Yan, W. (2017) · Energy and Buildings · doi:10.1016/j.enbuild.2017.04.085 · Cited by 103 · see citing works

Latent heat storage in building elements: A systematic review on properties and contextual performance factors

Mavrigiannaki, A., & Ampatzi, E. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.01.115 · Cited by 90 · see citing works

Thermal stress reduction in cool roof membranes using phase change materials (PCM)

Saffari, M., Piselli, C., de Gracia, Á., Pisello, A. L., Cotana, F., & Cabeza, L. F. (2017) · Energy and Buildings · doi:10.1016/j.enbuild.2017.10.068 · Cited by 90 · see citing works

Improvement of thermal inertia effect in buildings using shape stabilized PCM wallboard based on the enthalpy-temperature function

Wi, S., Chang, S. J., & Kim, S. (2020) · Sustainable Cities and Society · doi:10.1016/j.scs.2020.102067 · Cited by 90 · see citing works

Life cycle analysis (LCA) and life cycle cost analysis (LCCA) of phase change materials (PCM) for thermal applications: A review

Kyriaki, E., Konstantinidou, C. A., Giama, E., & Papadopoulos, A. M. (2017) · International Journal of Energy Research · doi:10.1002/er.3945 · Cited by 90 · see citing works

Quantitative evaluation of thermal performance and energy saving potential of the building integrated with PCM in a subarctic climate

Kenzhekhanov, S., Memon, S. A., & Adilkhanova, I. (2019) · Energy · doi:10.1016/j.energy.2019.116607 · Cited by 89 · see citing works

Parametric analysis and design optimisation of PCM thermal energy storage system for space cooling of buildings

Ručevskis, S., Akishin, P., & Korjakins, A. (2020) · Energy and Buildings · doi:10.1016/j.enbuild.2020.110288 · Cited by 88 · see citing works

Study on heat-transfer mechanism of wallboards containing active phase change material and parameter optimization with ventilation

Zhou, Y., Yu, C. W., & Zhang, G. (2018) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.04.083 · Cited by 83 · see citing works

Application of phase change materials to improve the thermal performance of cementitious material

Sharifi, N. P., & Sakulich, A. R. (2015) · Energy and Buildings · doi:10.1016/j.enbuild.2015.06.040 · Cited by 81 · see citing works

Climatic cycling assessment of red clay/perlite and vermiculite composite PCM for improving thermal inertia in buildings

Wi, S., Yang, S., Park, J. H., Chang, S. J., & Kim, S. (2019) · Building and Environment · doi:10.1016/j.buildenv.2019.106464 · Cited by 80 · see citing works

Energy saving performance assessment and lessons learned from the operation of an active phase change materials system in a multi-storey building in Melbourne

Alam, M., Zou, P. X. W., Sanjayan, J., & Ramakrishnan, S. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.01.116 · Cited by 80 · see citing works

Criteria-based ranking of green building design factors according to leading rating systems

Alwisy, A., BuHamdan, S., & Gül, M. (2018) · Energy and Buildings · doi:10.1016/j.enbuild.2018.08.043 · Cited by 79 · see citing works

Effect of melting point on thermodynamics of thin PCM reinforced residential frame walls in different climate zones

Li, M., Cao, Q., Pan, H. X., Wang, X., & Lin, Z. (2021) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2021.116615 · Cited by 77 · see citing works

Experimental set-up for testing active and passive systems for energy savings in buildings – Lessons learnt

de Gracia, Á., Navarro, L., Coma, J., Serrano, S., Romaní, J., Pérez, G., & Cabeza, L. F. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.09.109 · Cited by 77 · see citing works

Parametric analysis for performance enhancement of phase change materials in naturally ventilated buildings

Ramakrishnan, S., Wang, X., Alam, M., Sanjayan, J., & Wilson, J. L. (2016) · Energy and Buildings · doi:10.1016/j.enbuild.2016.04.065 · Cited by 76 · see citing works

Evaluation of global energy performance of building walls integrating PCM: Numerical study in semi-arid climate in Morocco

Salihi, M., Fiti, M. E., Harmen, Y., Chhiti, Y., Chebak, A., Alaoui, F. E. M., Achak, M., Bentiss, F., & Jama, C. (2022) · Case Studies in Construction Materials · doi:10.1016/j.cscm.2022.e00979 · Cited by 75 · see citing works

Case study of an advanced integrated comfort control algorithm with cooling, ventilation, and humidification systems based on occupancy status

Kim, S. H., & Moon, H. J. (2017) · Building and Environment · doi:10.1016/j.buildenv.2017.12.010 · Cited by 73 · see citing works

Performance of a Passive House under subtropical climatic conditions

Fokaides, P. A., Christoforou, E. A., Ilic, M., & Papadopoulos, A. M. (2016) · Energy and Buildings · doi:10.1016/j.enbuild.2016.09.060 · Cited by 71 · see citing works

Ranking PCMs for building façade applications using multi-criteria decision-making tools combined with energy simulations

Mukhamet, T., Kobeyev, S., Nadeem, A., & Memon, S. A. (2020) · Energy · doi:10.1016/j.energy.2020.119102 · Cited by 70 · see citing works

Peak indoor air temperature reduction for buildings in hot-humid climate using phase change materials

Al-Absi, Z. A., Isa, M. H. M., Ismail, M., Mardiana, A., & Ghazali, A. (2020) · Case Studies in Thermal Engineering · doi:10.1016/j.csite.2020.100762 · Cited by 69 · see citing works

A review of climate adaptation of phase change material incorporated in building envelopes for passive energy conservation

Yang, T., Ding, Y., Li, B., & Athienitis, A. K. (2023) · Building and Environment · doi:10.1016/j.buildenv.2023.110711 · Cited by 68 · see citing works

Experimental and numerical investigation of the cross-flow PCM heat exchanger for the energy saving of building HVAC

Promoppatum, P., Yao, S., Thomas, H., & Dave, A. (2016) · Energy and Buildings · doi:10.1016/j.enbuild.2016.12.043 · Cited by 66 · see citing works

Experimental analysis of thermal performance in buildings with shape-stabilized phase change materials

Kim, H. B., Masayuki, M. A. E., Choi, Y., & Kiyota, T. (2017) · Energy and Buildings · doi:10.1016/j.enbuild.2017.07.076 · Cited by 66 · see citing works

Simulating the Inter-Building Effect on energy consumption from embedding phase change materials in building envelopes

Han, Y., & Taylor, J. E. (2016) · Sustainable Cities and Society · doi:10.1016/j.scs.2016.03.001 · Cited by 62 · see citing works

Energy efficiency in the Romanian residential building stock: A literature review

Mureşan, A.-A., & Attia, S. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.02.022 · Cited by 61 · see citing works

Using COMSOL modeling to investigate the efficiency of PCMs at modifying temperature changes in cementitious materials – Case study

Sharifi, N. P., Freeman, G. E., & Sakulich, A. R. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.10.162 · Cited by 60 · see citing works

Combined use of phase change material and thermal insulation to improve energy efficiency of residential buildings

Abden, M. J., Tao, Z., Alim, M. A., Pan, Z., George, L., & Wuhrer, R. (2022) · Journal of Energy Storage · doi:10.1016/j.est.2022.105880 · Cited by 59 · see citing works

The effectiveness of phase change materials in relation to summer thermal comfort in air-conditioned office buildings

Costanzo, V., Evola, G., Marletta, L., & Nocera, F. (2018) · Building Simulation · doi:10.1007/s12273-018-0468-2 · Cited by 58 · see citing works

Energy, environmental, and economic analysis of different buildings envelope integrated with phase change materials in different climates

M’hamdi, Y., Baba, K., Tajayouti, M., & Nounah, A. (2022) · Solar Energy · doi:10.1016/j.solener.2022.07.031 · Cited by 56 · see citing works

Evaluating the passive and free cooling application methods of phase change materials in residential buildings: A comparative study

Alam, M., Sanjayan, J., Zou, P. X. W., Ramakrishnan, S., & Wilson, J. L. (2017) · Energy and Buildings · doi:10.1016/j.enbuild.2017.05.018 · Cited by 53 · see citing works

Energy Saving Potential of PCMs in Buildings under Future Climate Conditions

Gassar, A. A. A., & Yun, G. Y. (2017) · Applied Sciences · doi:10.3390/app7121219 · Cited by 53 · see citing works

Effectiveness of phase change materials for improving the resiliency of residential buildings to extreme thermal conditions

Baniassadi, A., Sailor, D. J., & Bryan, H. J. (2019) · Solar Energy · doi:10.1016/j.solener.2019.06.011 · Cited by 52 · see citing works

Domestic overheating risks and mitigation strategies: The state-of-the-art and directions for future research

Alrasheed, M., & Mourshed, M. M. (2023) · Indoor and Built Environment · doi:10.1177/1420326x231153856 · Cited by 49 · see citing works

Utilizing the Fanger thermal comfort model to evaluate the thermal, energy, economic, and environmental performance of PCM-integrated buildings in various climate zones worldwide

Abilkhassenova, Z., Memon, S. A., Ahmad, A., Saurbayeva, A., & Kim, J. R. (2023) · Energy and Buildings · doi:10.1016/j.enbuild.2023.113479 · Cited by 48 · see citing works

A parametric study of phase change material characteristics when coupled with thermal insulation for different Australian climatic zones

Solgi, E., Hamedani, Z., Fernando, R., & Kari, B. M. (2019) · Building and Environment · doi:10.1016/j.buildenv.2019.106317 · Cited by 47 · see citing works

Application of shape-stabilized phase-change material sheets as thermal energy storage to reduce heating load in Japanese climate

Kim, H. B., Masayuki, M. A. E., & Choi, Y. (2017) · Building and Environment · doi:10.1016/j.buildenv.2017.08.038 · Cited by 45 · see citing works

Hysteresis effects on the thermal performance of building envelope PCM-walls

Moreles, E., Huelsz, G., & Barrios, G. (2018) · Building Simulation · doi:10.1007/s12273-017-0426-4 · Cited by 45 · see citing works

Innovative construction material technologies for sustainable and resilient civil infrastructure

Soliman, A., Hafeez, G., Erkmen, E., Ganesan, R., Ouf, M. M., Hammad, A., Eicker, U., & Moselhi, O. (2022) · Materials Today Proceedings · doi:10.1016/j.matpr.2022.01.248 · Cited by 44 · see citing works

Thermal performance of stearic acid/carbon nanotube composite phase change materials for energy storage prepared by ball milling

Li, Y., Zhang, N., Yuan, Y., Cao, X., & Xiang, B. (2018) · International Journal of Energy Research · doi:10.1002/er.4352 · Cited by 44 · see citing works

A numerical study on optimizing the designs of applying PCMs to a disaster-relief prefabricated temporary-house (PTH) to improve its summer daytime indoor thermal environment

Wang, C., Deng, S., Niu, J., & Long, E. (2019) · Energy · doi:10.1016/j.energy.2019.05.165 · Cited by 44 · see citing works

The impact of wall and roof material on the summer thermal performance of building in a temperate climate

Staszczuk, A. K., & Kuczyński, T. (2021) · Energy · doi:10.1016/j.energy.2021.120482 · Cited by 44 · see citing works

Thermal comfort and energy performance of public rental housing under typical and near-extreme weather conditions in Hong Kong

Kwok, Y. T., Lai, A. K. L., Lau, K. K., Chan, P. W., Lavafpour, Y., Ho, J. C. K., & Ng, E. (2017) · Energy and Buildings · doi:10.1016/j.enbuild.2017.09.067 · Cited by 43 · see citing works

An integrated energy performance-driven generative design methodology to foster modular lightweight steel framed dwellings in hot climates

Rodrigues, E. M. D. S., Soares, N., Fernandes, M. S., Gaspar, A. R., Gomes, Á., & Costa, J. J. (2018) · Energy Sustainable Development/Energy for sustainable development · doi:10.1016/j.esd.2018.02.006 · Cited by 42 · see citing works

Experimental and Numerical Study on Energy Piles with Phase Change Materials

Mousa, M. M., Bayomy, A. M., & Saghir, M. Z. (2020) · Energies · doi:10.3390/en13184699 · Cited by 42 · see citing works

Study on heat transfer performance of a solar double-slope PCM glazed roof with different physical parameters

Mao, Q., & Yang, M. (2020) · Energy and Buildings · doi:10.1016/j.enbuild.2020.110141 · Cited by 41 · see citing works

Performance characterization of novel caisson-based thermal storage for ground source heat pumps

Shukla, S., Bayomy, A. M., Antoun, S., Mwesigye, A., Leong, W. H., & Dworkin, S. B. (2021) · Renewable Energy · doi:10.1016/j.renene.2021.04.075 · Cited by 38 · see citing works

Evidence-based ranking of green building design factors according to leading energy modelling tools

Alwisy, A., BuHamdan, S., & Gül, M. (2019) · Sustainable Cities and Society · doi:10.1016/j.scs.2019.101491 · Cited by 37 · see citing works

Experimental and numerical assessment of using coconut oil as a phase‐change material for unconditioned buildings

Alqahtani, T., Mellouli, S., Bamasag, A., Askri, F., & Phelan, P. E. (2020) · International Journal of Energy Research · doi:10.1002/er.5176 · Cited by 37 · see citing works

System performance and economic assessment of a thermal energy storage based air-conditioning unit for transport applications

Nie, B., She, X., Du, Z., Xie, C., Li, Y., He, Z., & Ding, Y. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.05.057 · Cited by 36 · see citing works

Effect of technology-enabled time-of-use energy pricing on thermal comfort and energy use in mechanically-conditioned residential buildings in cooling dominated climates

Cetin, K. S., Manuel, L., & Novoselac, A. (2015) · Building and Environment · doi:10.1016/j.buildenv.2015.11.012 · Cited by 32 · see citing works

Experimental Research on Using Form-stable PCM-Integrated Cementitious Composite for Reducing Overheating in Buildings

Ramakrishnan, S., Sanjayan, J., & Wang, X. (2019) · Buildings · doi:10.3390/buildings9030057 · Cited by 32 · see citing works

Empirical validation and comparison of methodologies to simulate micro and macro-encapsulated PCMs in the building envelope

Wijesuriya, S., & Tabares-Velasco, P. C. (2021) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2021.116646 · Cited by 32 · see citing works

Towards Sustainable Development: Building’s Retrofitting with PCMs to Enhance the Indoor Thermal Comfort in Tropical Climate, Malaysia

Al-Absi, Z. A., Isa, M. H. M., Ismail, M., & Ghazali, A. (2021) · Sustainability · doi:10.3390/su13073614 · Cited by 32 · see citing works

Improving the indoor thermal environment in lightweight buildings in winter by passive solar heating: An experimental study

Kou, F., Shi, S., Zhu, N., Song, Y., Zou, Y., Mo, J., & Wang, X. (2022) · Indoor and Built Environment · doi:10.1177/1420326x221091448 · Cited by 32 · see citing works

Simple thermal evaluation of building envelopes containing phase change materials using a modified admittance method

Thiele, A. M., Liggett, R. S., Sant, G., & Pilon, L. (2017) · Energy and Buildings · doi:10.1016/j.enbuild.2017.03.046 · Cited by 32 · see citing works

Numerical analysis of phase change materials/wood–plastic composite roof module system for improving thermal performance

Chang, S. J., Wi, S., Cho, H., Jeong, S., & Kim, S. (2019) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2019.11.005 · Cited by 31 · see citing works

Experimental study of the thermal behavior of PCM and heavy building envelope structures during summer in a temperate climate

Kuczyński, T., & Staszczuk, A. K. (2023) · Energy · doi:10.1016/j.energy.2023.128033 · Cited by 30 · see citing works

Performance Evaluation of an Active PCM Thermal Energy Storage System for Space Cooling in Residential Buildings

Ručevskis, S., Akishin, P., & Korjakins, A. (2019) · Environmental and Climate Technologies · doi:10.2478/rtuect-2019-0056 · Cited by 28 · see citing works

Application of lightweight aggregate and rice husk ash to incorporate phase change materials into cementitious materials

Sharifi, N. P., Jafferji, H., Reynolds, S. E., Blanchard, M. G., & Sakulich, A. R. (2016) · Journal of Sustainable Cement-Based Materials · doi:10.1080/21650373.2016.1207576 · Cited by 28 · see citing works

Maintenance of Passive House Standard in the Light of Long-Term Study on Energy Use in a Prefabricated Lightweight Passive House in Central Europe

Wąs, K., Radoń, J., & Sadłowska-Sałęga, A. (2020) · Energies · doi:10.3390/en13112801 · Cited by 27 · see citing works

Experimental apparatus and methodology to test and quantify thermal performance of micro and macro-encapsulated phase change materials in building envelope applications

Wijesuriya, S., & Tabares-Velasco, P. C. (2020) · Journal of Energy Storage · doi:10.1016/j.est.2020.101770 · Cited by 26 · see citing works

Influence of phase change materials on thermal comfort, greenhouse gas emissions, and potential indoor air quality issues across different climatic regions: A critical review

Amoatey, P., Al-Jabri, K. S., & Al-Saadi, S. N. (2022) · International Journal of Energy Research · doi:10.1002/er.8734 · Cited by 26 · see citing works

Modelling for performance prediction of highly insulated buildings with different types of thermal mass

Siddiqui, O., Kumar, R., Fung, A. S., Zhang, D., White, M. A., & Whitman, C. A. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.05.021 · Cited by 24 · see citing works

Optimization study for PCM application in residential buildings under desert climatic conditions

Al-Absi, Z. A., Asif, M., & Hafizal, M. I. M. (2024) · Journal of Energy Storage · doi:10.1016/j.est.2024.114399 · Cited by 22 · see citing works

Potential of thermal, electricity and hydrogen storage systems for achieving sustainable buildings

Elaouzy, Y., & Fadar, A. E. (2023) · Energy Conversion and Management · doi:10.1016/j.enconman.2023.117601 · Cited by 22 · see citing works

Analysis of Incorporating a Phase Change Material in a Roof for the Thermal Management of School Buildings in Hot-Humid Climates

Hwang, R., Chen, B., & Chen, W.-A. (2021) · Buildings · doi:10.3390/buildings11060248 · Cited by 21 · see citing works

The evaluation of the thermal behaviour of a mortar based brick masonry wall coated with TiO2 nanoparticles: An experimental assessment towards energy efficient buildings

Carneiro, J., Vasconcelos, G., Azevedo, S., Jesus, C. M. G., Palha, C. A. O. F., Gomes, N., & Teixeira, V. M. (2014) · Energy and Buildings · doi:10.1016/j.enbuild.2014.06.006 · Cited by 21 · see citing works

Towards Passive Design Strategies for Improving Thermal Comfort Performance in a Naturally Ventilated Residence

Rana, K. (2021) · Journal of Sustainable Architecture and Civil Engineering · doi:10.5755/j01.sace.29.2.29256 · Cited by 19 · see citing works

Impact of a Composite Trombe Wall Incorporating Phase Change Materials on the Thermal Behavior of an Individual House with Low Energy Consumption

Leang, E., Tittelein, P., Zalewski, L., & Lassue, S. (2020) · Energies · doi:10.3390/en13184872 · Cited by 19 · see citing works

Thermal Analysis of Building Roofs with Latent Heat Storage for Reduction in Energy Consumption and CO2 Emissions: An Experimental and Numerical Research

Cüce, E., Shaik, S., Roy, A., Arumugam, C., Afzal, A., Cuce, P. M., Ghosh, A., Alam, T., & Shaik, S. V. (2024) · Advances in Civil Engineering · doi:10.1155/2024/6676188 · Cited by 18 · see citing works

Long-term functionality of a passive phase-change materials building application after more than a decade of operation

Obergfell, T., Guzmán, J. S., Haussmann, T., Gschwander, S., & Wagner, A. (2021) · Energy and Buildings · doi:10.1016/j.enbuild.2021.111213 · Cited by 17 · see citing works

Characterizing the performance of a passive solar house with hydronic floor energy capture system – Heating season experiments

Brown, S. G., & Beausoleil-Morrison, I. (2021) · Energy and Buildings · doi:10.1016/j.enbuild.2021.111404 · Cited by 17 · see citing works

Outdoor Characterization of Phase Change Materials and Assessment of Their Energy Saving Potential to Reach NZEB

Cornaro, C., Pierro, M., Puggioni, V. A., & Roncarati, D. (2017) · Buildings · doi:10.3390/buildings7030055 · Cited by 17 · see citing works

Long-Term Comparative Life Cycle Assessment, Cost, and Comfort Analysis of Heavyweight vs. Lightweight Construction Systems in a Mediterranean Climate

Costantino, C., Bigiotti, S., Marucci, A., & Gulli, R. (2024) · Sustainability · doi:10.3390/su16208959 · Cited by 15 · see citing works

Thermal analysis of cylindrical heat sinks filled with phase change material for high-power transient cooling

Jeong, J.-H., Hah, S., Kim, D., Lee, J. H., & Kim, S. (2020) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2020.119725 · Cited by 15 · see citing works

Thermal performance of building envelope of ready-made garments (RMG) factories in Dhaka, Bangladesh

Chowdhury, S., Ahmed, K. S., & Hamada, Y. (2015) · Energy and Buildings · doi:10.1016/j.enbuild.2015.08.014 · Cited by 14 · see citing works

Evaluation of Phase Change Materials for Cooling in a Super-Insulated Passive House

Lauck, J. (2000) · doi:10.15760/etd.1443 · Cited by 7 · see citing works

Phase Change Materials as a Thermal Storage Device for Passive Houses

Campbell, K. (2000) · doi:10.15760/etd.201 · Cited by 5 · see citing works

Energy-saving and overheating-mitigation effects of phase change materials on buildings in cold regions

Xu, Y., Zhao, B., Yu, J., Zhao, Y., Chang, W., & Guo, H. (2025) · Energy and Buildings · doi:10.1016/j.enbuild.2025.116284 · Cited by 14 · see citing works

Energetic and thermal comfort assessment of phase change material passively incorporated building envelope in severe hot Climate: An experimental study

Al-Yasiri, Q. M. Q., & Szabó, M. (2022) · Applied Energy · doi:10.1016/j.apenergy.2022.118957 · Cited by 111 · see citing works

Thermal performance analysis of a residential house equipped with Phase Change Material

Gounni, A., & Louahlia, H. (2019) · E3S Web of Conferences · doi:10.1051/e3sconf/201912805004 · Cited by 2 · see citing works