CoChat

Evaluation of the methane potential of different agricultural and food processing substrates for improved biogas production in rural areas

Garcia, Natalia Herrero, Mattioli, Andrea, Gil, Aida, Frison, Nicola, Battista, Federico, Bolzonella, David · 2019 · Renewable and Sustainable Energy Reviews
Cited by 130

The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.

Abstract

Abstract Anaerobic Digestion is largely applied in the rural context because of its capability of stabilizing the organic matter while recovering biogas, thus renewable energy, and a renewable fertilizer, the digestate. In the present study, the methane yield of a large number of organic biomasses generated in the agro-industrial sector was evaluated by biomethane potential trials. More than 50 different organic substrates were grouped according to their chemical characteristics or their application in 7 major categories: energy crops, lignocellulosic by-products, herbaceous by-products, vegetable by-products, fruits by-products, livestock effluents and miscellaneous food processing by-products. Results demonstrated that the concentration and the nature of the organic matter is able to influence the methane production. Energy crops are among the more diffused substrates with about 200 million tons/year. Its wide adoption is justified by relative high methane yields (250–350 L CH4/kg TVS) and mainly by the rapid degradation rates with hydrolysis constant of about 0.15 d−1. By-products characterized by high content of lignocellulosic materials showed slower kinetics (0.05–0.09 d−1) and a methane production in the range of 150–400 L CH4/kg TVS, which increased with cellulose content. Livestock effluents had generally a lower methane yield (50–200 L CH4/kg TVS) as effect of the higher ammonia inhibiting compounds. Finally, food by products were characterized by a large methane production's range, 150–700 L CH4/kg TVS, due to heterogeneous nature of these substrates. Food by products rich in lipids content had the higher methane yield (400–700 L CH4/kg TVS), but showed the slowest kinetics (kh lower than 0.1 d−1). P Substrates rich in proteins and carbohydrates had lower methane yields (300–450 L CH4/kg TVS) but higher hydrolysis constants, generally upper than 0.1 d−1. Considering the global biomass generation of these substrates at European level, it was determined that their valorisation could contribute with an annual potential energy output of 2584 PJ (61.7 Mtoe), representing 5.7% of total energy consumed in EU- 28 in 2015 or 34,1% of total renewable energy in the same year.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1016/j.rser.2019.05.040

Cites

4 of 4 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Cited by

See all 130

Metadata

Authors
Garcia, N. H., Mattioli, A., Gil, A., Frison, N., Battista, F., & Bolzonella, D.
Venue
Renewable and Sustainable Energy Reviews
Publisher
Elsevier BV
Published
2019-09
Volume
112
Pages
1-10
ISSN
1364-0321 (ISSN-L)
OpenAlex
W2944844862
Cited by
130
References
4
FWCI
10.85
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.