The DOI matches its Crossref record; 9 of the 9 references it cites were found in a registry or an index.
Progress on use of nanoparticles in salt hydrates as phase change materials
Abstract
Abstract Salt hydrates are considered to be promising materials for thermal energy storage (TES) and are being widely used in different areas. However, these compounds have several drawbacks that are currently targeted to be improved. In this regard, the use of nanoparticles for dealing with low thermal conductivity and high subcooling degree of salt hydrates has been recently proposed. In consequence, the objective of this review was to analyze and compare the enhancement of the properties of salt hydrates and their eutectic mixtures by nanoparticles. The methods of addition of nanoparticles into salt hydrates were also classified and discussed. Additionally, the influence of nanoparticles on thermal and physical properties, such as viscosity and latent heat, was discussed. Thermal conductivity and subcooling are among the properties that show great profit from nanoparticles. Hence, the enhancement of PCM with nanomaterials can encourage their application in buildings, heat exchangers, solar power plants and solar cookers, among others. These improvements achieved for the salt hydrates project them as excellent PCM, making them suitable for the market.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Recent developments in phase change materials for energy storage applications: A review
Nazir, H., Batool, M., Bolivar Osorio, F. J., Isaza-Ruiz, M., Xu, X., Vignarooban, K., Phelan, P., Inamuddin, & Kannan, A. M. (2019) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.09.126 · Cited by 1,522
Khan, Z., Khan, Z., & Ghafoor, A. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.02.045 · Cited by 765
Mohamed, S. A., Al-Sulaiman, F. A., Ibrahim, N. I., Zahir, M. H., Al-Ahmed, A., Saidur, R., Yılbaş, B. S., & Sahin, A. Z. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.12.012 · Cited by 759
Milián, Y. E., Gutiérrez, A., Grágeda, M., & Ushak, S. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.01.159 · Cited by 491
Self-citationLeong, K. Y., Abdul Rahman, M. R., & Gurunathan, B. A. (2019) · Journal of Energy Storage · doi:10.1016/j.est.2018.11.008 · Cited by 405
Chieruzzi, M., Cerritelli, G. F., Miliozzi, A., & Kenny, J. M. (2013) · Nanoscale Research Letters · doi:10.1186/1556-276x-8-448 · Cited by 381
Emerging Applications of Phase‐Change Materials (PCMs): Teaching an Old Dog New Tricks
Hyun, D. C., Levinson, N. S., Jeong, U., & Xia, Y. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201305201 · Cited by 363
Review on micro/nano phase change materials for solar thermal applications
Qiu, L., Ouyang, Y., Feng, Y., & Zhang, X. (2019) · Renewable Energy · doi:10.1016/j.renene.2019.03.088 · Cited by 255
Nitrate salts doped with CuO nanoparticles for thermal energy storage with improved heat transfer
Myers, P. D., Alam, T. E., Kamal, R., Goswami, D. Y., & Stefanakos, E. (2016) · Applied Energy · doi:10.1016/j.apenergy.2015.11.045 · Cited by 192
Cited by
Nano-enhanced phase change materials: Fundamentals and applications
Said, Z., Pandey, A. K., Tiwari, A. K., Kalidasan, B., Jamil, F., Thakur, A. K., Tyagi, V. V., Sarı, A., & Ali, H. M. (2024) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2024.101162 · Cited by 386
Jayathunga, D. S., Karunathilake, H. P., Narayana, M., & Witharana, S. (2024) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2023.113904 · Cited by 298
Hassan, F., Jamil, F., Hussain, A., Ali, H. M., Janjua, M. M., Khushnood, S., Farhan, M., Altaf, K., Said, Z., & Li, C. (2022) · Sustainable Energy Technologies and Assessments · doi:10.1016/j.seta.2021.101646 · Cited by 283
Yu, K., Liu, Y., & Yang, Y. (2021) · Applied Energy · doi:10.1016/j.apenergy.2021.116845 · Cited by 278
Liu, Y., Zheng, R., & Li, J. (2022) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2022.112783 · Cited by 276
Metadata
- Authors
- Wong-Pinto, L.-S., Milian, Y., & Ushak, S.
- Venue
- Renewable and Sustainable Energy Reviews
- Publisher
- Elsevier BV
- Published
- 2020-04
- Volume
- 122
- Pages
- 109727
- ISSN
- 1364-0321 (ISSN-L)
- OpenAlex
- W3003355171
- Cited by
- 165
- References
- 9
- FWCI
- 11.75
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.