The DOI matches its Crossref record; 222 of the 222 references it cites were found in a registry or an index.
Waste tyre valorization by catalytic pyrolysis – A review
Open accessAbstract
The environmental concern associated with waste tyre disposal and the necessity of sustainable waste management policies has promoted the development of waste tyre valorization processes in the last decades. Within this framework, this review analyzes the main advances in waste tyre valorization by catalytic pyrolysis. Waste tyre pyrolysis allows converting this solid waste into three product fractions of potential interest, as are gases, pyrolysis oil (TPO) and char, with their yield and features being conditioned by pyrolysis conditions. Catalytic pyrolysis is an interesting alternative to improve the quality of the products and the selectivity of the process. A wide range of catalysts have been proposed in the literature for waste tyre valorization, with zeolites being the most commonly used due to their capacity for the production of valuable chemicals, such as BTX and light olefins. This review approaches multidisciplinary aspects for the evaluation of the critical points in this process, such as those related to pyrolysis technologies, reaction mechanisms, catalyst design and products properties.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Items 201–222 of 222
Antoniou, N., & Zabaniotou, A. A. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.10.319 · Cited by 36
Rodríguez, E., Gutiérrez, A., Palos, R., Azkoiti, M. J., Arandes, J. M., & Bilbao, J. (2019) · Energy & Fuels · doi:10.1021/acs.energyfuels.9b00292 · Cited by 36
Self-citationOxidative desulfurization of tire pyrolysis oil
Ahmad, S., Ahmad, M. M., Naeem, K., Humayun, M., Sebt-E-Zaeem, S., & Faheem, F. (2015) · Chemical Industry and Chemical Engineering Quarterly · doi:10.2298/ciceq150609038a · Cited by 35
Rodríguez, E., Palos, R., Gutiérrez, A., Arandes, J. M., & Bilbao, J. (2020) · Waste Management · doi:10.1016/j.wasman.2020.01.026 · Cited by 34
Self-citationInfluence of the fountain confiner in a conical spouted bed dryer
Estiati, I., Tellabide, M., Saldarriaga, J. F., et al. (2019) · Powder Technology · doi:10.1016/j.powtec.2019.08.005 · Cited by 32
Muenpol, S., Yuwapornpanit, R., & Jitkarnka, S. (2015) · Clean Technologies and Environmental Policy · doi:10.1007/s10098-015-0935-8 · Cited by 31
Aguado, R., Arrizabalaga, A., Arabiourrutia, M., López, G., Bilbao, J., & Olazar, M. (2013) · Chemical Engineering Science · doi:10.1016/j.ces.2013.11.024 · Cited by 31
Self-citationDũng, N. A., Tanglumlert, W., Wongkasemjit, S., & Jitkarnka, S. (2010) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2010.01.004 · Cited by 30
Light olefin production from catalytic pyrolysis of waste tires using nano-HZSM-5/γ-Al2O3 catalysts
He, Z., Jiao, Q., Fang, Z., Li, T., Feng, C., Li, H., & Zhao, Y. P. (2017) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2017.12.002 · Cited by 29
Kordoghli, S., Khiari, B., Paraschiv, M., Zagrouba, F., & Tazerout, M. (2018) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2018.09.102 · Cited by 29
Preparation of activated carbon from waste tires, and its use for dye removal
Özbaş, E. E., Balçık, B., & Özcan, H. K. (2019) · Desalination and Water Treatment · doi:10.5004/dwt.2019.24493 · Cited by 29
Role of the Catalyst in the Pyrolysis of Polyolefin Mixtures and Used Tires
Palza, H., Aravena, C., & Colet, M. (2017) · Energy & Fuels · doi:10.1021/acs.energyfuels.6b02660 · Cited by 28
Machín, E. B., Pedroso, D. T., & de Carvalho, J. A. (2017) · Waste Management · doi:10.1016/j.wasman.2017.07.004 · Cited by 28
Effect of Steel Wires on the Microwave Pyrolysis of Tire Powders
Song, Z., Yan, Y., Xie, M., Lv, X., Yang, Y., Liu, L., & Zhao, X. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b03337 · Cited by 28
The Application of Zeolites in Catalysis
Gläser, R. J., & Weitkamp, J. (2004) · Springer series in chemical physics · doi:10.1007/978-3-662-05981-4_5 · Cited by 26
The Catalytic Co-pyrolysis of Waste Tires and Pistachio Seeds
Оnаy, Ö. (2014) · Energy Sources Part A Recovery Utilization and Environmental Effects · doi:10.1080/15567036.2013.791900 · Cited by 26
Research into fine powder and large particle tyre pyrolysis
Gao, N., Li, A., & Li, W. (2009) · Waste Management & Research The Journal for a Sustainable Circular Economy · doi:10.1177/0734242x08091553 · Cited by 26
The influence of the pyrolysis conditions in a rotary oven on the characteristics of the products
Acevedo, B., & Barriocanal, C. (2014) · Fuel Processing Technology · doi:10.1016/j.fuproc.2014.11.016 · Cited by 24
Process for the Separation of Gas Products from Waste Tire Pyrolysis
Murillo, R., Aranda, A., Aylón, E., et al. (2006) · Industrial & Engineering Chemistry Research · doi:10.1021/ie0506421 · Cited by 19
Waste Tire Pyrolysis for the Production of Light Hydrocarbons over Layered Catalysts
Leng, S., Wang, X., Wang, J., Liu, Y., Ma, F., & Zhong, X. (2015) · Energy Technology · doi:10.1002/ente.201500031 · Cited by 13
Valorisation of Waste Tires by Pyrolysis over a FCC Catalyst in a Conical Spouted Bed Reactor
Amutio, M., López, G., Artetxe, M., Erkiaga, A., Álvarez, J., Barbarias, I., & Olazar, M. (2012) · Chemical engineering transactions · doi:10.3303/cet1229137 · Cited by 13
Self-citationDevelopment of a rotary kiln reactor for pyrolytic oil production from waste tire in Indonesia
Syamsiro, M., Dwicahyo, M. S., Sulistiawati, Y., Ridwan, M., & Citrasari, N. (2019) · IOP Conference Series Earth and Environmental Science · doi:10.1088/1755-1315/245/1/012044 · Cited by 12
Cited by
Progress in utilisation of waste cooking oil for sustainable biodiesel and biojet fuel production
Goh, B. H. H., Chong, C. T., Ge, Y., Ong, H. C., Ng, J.-H., Tian, B., Ashokkumar, V., Lim, S., Seljak, T., & Józsa, V. (2020) · Energy Conversion and Management · doi:10.1016/j.enconman.2020.113296 · Cited by 311
Pyrolysis of Waste Tires: A Review
Han, W., Han, D., & Chen, H. (2023) · Polymers · doi:10.3390/polym15071604 · Cited by 202
“Catalysts with large pore size and low Si-Al ratio have better extraction effect on aromatics, but the use of such catalysts can reduce the output of pyrolysis oil [7].”
BackgroundMethodTire pyrolysis char: Processes, properties, upgrading and applications
Gao, N., Wang, F., Quan, C., Santamaria, L., Lopez, G., & Williams, P. T. (2022) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2022.101022 · Cited by 188
Campuzano, F., Abdul Jameel, A. G., Zhang, W., Emwas, A.-H., Agudelo, A. F., Martínez, J. D., & Sarathy, S. M. (2020) · Energy & Fuels · doi:10.1021/acs.energyfuels.0c02271 · Cited by 81
Campuzano, F., Martínez, J. D., Agudelo Santamaría, A. F., Sarathy, S. M., & Roberts, W. L. (2023) · Energy & Fuels · doi:10.1021/acs.energyfuels.3c00847 · Cited by 51
Metadata
- Authors
- Arabiourrutia, M., Lopez, G., Artetxe, M., Alvarez, J., Bilbao, J., & Olazar, M.
- Venue
- Renewable and Sustainable Energy Reviews
- Publisher
- Elsevier BV
- Published
- 2020-09
- Volume
- 129
- Pages
- 109932
- ISSN
- 1364-0321 (ISSN-L)
- OpenAlex
- W3034001940
- Cited by
- 284
- References
- 222
- FWCI
- 12.16
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.