The DOI matches its Crossref record; 111 of the 111 references it cites were found in a registry or an index.
A review of phase change heat transfer in shape-stabilized phase change materials (ss-PCMs) based on porous supports for thermal energy storage
Open accessAbstract
Latent heat thermal energy storage (LHTES) uses phase change materials (PCMs) to store and release heat, and can effectively address the mismatch between energy supply and demand. However, it suffers from low thermal conductivity and the leakage problem. One of the solutions is integrating porous supports and PCMs to fabricate shape-stabilized phase change materials (ss-PCMs). The phase change heat transfer in porous ss-PCMs is of fundamental importance for determining thermal-fluidic behaviours and evaluating LHTES system performance. This paper reviews the recent experimental and numerical investigations on phase change heat transfer in porous ss-PCMs. Materials, methods, apparatuses and significant outcomes are included in the section of experimental studies and it is found that paraffin and metal foam are the most used PCM and porous support respectively in the current researches. Numerical advances are reviewed from the aspect of different simulation methods. Compared to representative elementary volume (REV)-scale simulation, the pore-scale simulation can provide extra flow and heat transfer characteristics in pores, exhibiting great potential for the simulation of mesoporous, microporous and hierarchical porous materials. Moreover, there exists a research gap between phase change heat transfer and material preparation. Finally, this review outlooks the future research topics of phase change heat transfer in porous ss-PCMs.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Thring, M. W. (1977) · Electronics and Power · doi:10.1049/ep.1977.0180 · Cited by 7,338
Review on thermal energy storage with phase change materials and applications
Sharma, A., Tyagi, V. V., Chen, C. R., & Buddhi, D. (2009) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2007.10.005 · Cited by 5,936
Nield, D. A., & Bejan, A. (1999) · Springer eBooks · doi:10.1007/978-1-4757-3033-3 · Cited by 5,282
Principles of Heat Transfer in Porous Media
Kaviany, M. (1995) · Mechanical engineering series · doi:10.1007/978-1-4612-4254-3 · Cited by 2,853
Lallemand, P., & Luo, L.-S. (2000) · Physical Review E · doi:10.1103/physreve.61.6546 · Cited by 2,268
Phase change materials for thermal energy storage
Pielichowska, K., & Pielichowski, K. (2014) · Progress in Materials Science · doi:10.1016/j.pmatsci.2014.03.005 · Cited by 2,106
Use of the Boltzmann Equation to Simulate Lattice-Gas Automata
McNamara, G. R., & Zanetti, G. (1988) · Physical Review Letters · doi:10.1103/physrevlett.61.2332 · Cited by 2,079
Agyenim, F., Hewitt, N., Eames, P., & Smyth, M. (2010) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2009.10.015 · Cited by 2,072
Correlating equations for laminar and turbulent free convection from a vertical plate
Churchill, S. W., & Chu, H. H. S. (1975) · International Journal of Heat and Mass Transfer · doi:10.1016/0017-9310(75)90243-4 · Cited by 2,060
(2006) · Springer eBooks · doi:10.1007/0-387-33431-9 · Cited by 1,683
Heat Transfer from Tubes in Crossflow
Žukauskas, A. (1972) · Advances in Heat Transfer · doi:10.1016/s0065-2717(08)70038-8 · Cited by 1,408
Thermal energy storage technologies and systems for concentrating solar power plants
Kuravi, S., Trahan, J., Goswami, D. Y., Rahman, M. M., & Stefanakos, E. K. (2013) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2013.02.001 · Cited by 1,295
Lattice Boltzmann methods for multiphase flow and phase-change heat transfer
Li, Q., Luo, K. H., Kang, Q. J., He, Y. L., Chen, Q., & Liu, Q. (2016) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2015.10.001 · Cited by 947
Thermal energy storage: Recent developments and practical aspects
Zhang, H., Baeyens, J., Cáceres, G., Degrève, J., & Lv, Y. (2016) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2015.10.003 · Cited by 910
Lattice Boltzmann methods for multiphase flow and phase-change heat transfer
Li, Q., Luo, K. H., Kang, Q., He, Y., Chen, Q., & Liu, Q. (2016) · UCL Discovery (University College London) · Cited by 861
Umair, M. M., Zhang, Y., Iqbal, K., Zhang, S., & Tang, B. (2019) · Applied Energy · doi:10.1016/j.apenergy.2018.11.017 · Cited by 852
Self-citationLattice Boltzmann model for incompressible flows through porous media
Guo, Z., & Zhao, T. S. (2002) · Physical Review E · doi:10.1103/physreve.66.036304 · Cited by 774
Zhao, C. Y., Lu, W., & Tian, Y. (2010) · Solar Energy · doi:10.1016/j.solener.2010.04.022 · Cited by 757
Predictions of effective physical properties of complex multiphase materials
WANG, M., & PAN, N. (2008) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2008.07.001 · Cited by 705
Huang, X., Chen, X., Li, A., Atinafu, D., Gao, H., Dong, W., & Wang, G. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.09.013 · Cited by 701
Self-citationPreparation and thermal characterization of paraffin/metal foam composite phase change material
Xiao, X., Zhang, P., & Li, M. (2013) · Applied Energy · doi:10.1016/j.apenergy.2013.04.050 · Cited by 627
Zhang, P., Xiao, X., & Ma, Z. W. (2016) · Applied Energy · doi:10.1016/j.apenergy.2015.12.043 · Cited by 555
Tauseef-ur-Rehman, Ali, H. M., Janjua, M. M., Sajjad, U., & Yan, W.-M. (2019) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2019.02.001 · Cited by 507 · cited 2×
“It is generally believed that the addition of porous media promotes the heat conduction while it hampers the natural convection [18, 53].”
BackgroundZhang, P., Meng, Z. N., Zhu, H., Wang, Y. L., & Peng, S. P. (2017) · Applied Energy · doi:10.1016/j.apenergy.2015.10.075 · Cited by 497
Tian, Y., & Zhao, C. Y. (2011) · Energy · doi:10.1016/j.energy.2011.07.019 · Cited by 495
Wang, Z., Zhang, Z., Jia, L., & Yang, L. (2015) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.01.009 · Cited by 425
Liu, Z., Yao, Y., & Wu, H. (2013) · Applied Energy · doi:10.1016/j.apenergy.2013.02.022 · Cited by 405
Thermal performance of copper foam/paraffin composite phase change material
Zheng, H., Wang, C., Liu, Q., Tian, Z., & Fan, X. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.12.023 · Cited by 404
Li, W. Q., Qu, Z. G., He, Y. L., & Tao, W. Q. (2012) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2011.11.001 · Cited by 396
Xu, Y., Ren, Q., Zheng, Z.-J., & He, Y.-L. (2017) · Applied Energy · doi:10.1016/j.apenergy.2017.02.019 · Cited by 393
Gao, H., Wang, J., Chen, X., Wang, G., Huang, X., Li, A., & Dong, W. (2018) · Nano Energy · doi:10.1016/j.nanoen.2018.09.007 · Cited by 391 · cited 6×
“Porous support materials of ss-PCMs: graphite foam [13], mesoporous silica [12], carbon nanotube (CNT) [14], metal-organic framework (MOF) [12], porous coordination polymer (PCP) [15], hierarchical porous polymer (HPP) [16], hierarchical porous carbon (HPC) [17].”
BackgroundInfluentialSelf-citationZhou, D., & Zhao, C. Y. (2011) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2010.11.022 · Cited by 366
Kuwahara, F., Shirota, M., & Nakayama, A. (2001) · International Journal of Heat and Mass Transfer · doi:10.1016/s0017-9310(00)00166-6 · Cited by 337
Form-stable phase change materials for thermal energy storage
Kenisarin, M. M., & Kenisarina, K. M. (2012) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.01.015 · Cited by 327
Mahdi, J. M., & Nsofor, E. C. (2017) · Applied Energy · doi:10.1016/j.apenergy.2016.11.036 · Cited by 322
CFD applications for latent heat thermal energy storage: a review
Al-abidi, A. A., Bin Mat, S., Sopian, K., Sulaiman, M. Y., & Mohammed, A. T. (2013) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.11.079 · Cited by 318
LATTICE BOLTZMANN METHOD FOR THE HEAT CONDUCTION PROBLEM WITH PHASE CHANGE
Wen-Shu Jiaung, J.-R. H. (2001) · Numerical Heat Transfer, Part B: Fundamentals · doi:10.1080/10407790150503495 · Cited by 315
Lattice Boltzmann model for melting with natural convection
Huber, C., Parmigiani, A., Chopard, B., Manga, M., & Bachmann, O. (2008) · International Journal of Heat and Fluid Flow · doi:10.1016/j.ijheatfluidflow.2008.05.002 · Cited by 310
Advances in thermal energy storage systems: methods and applications
Cabeza, L. F. (2021) · Advances in Thermal Energy Storage Systems · doi:10.1016/b978-0-12-819885-8.00002-4 · Cited by 302
Rarefied Gas Dynamics: Theory and Simulations
(1994) · American Institute of Aeronautics and Astronautics eBooks · doi:10.2514/4.866319 · Cited by 296
Talebizadehsardari, P., Mohammed, H. I., Giddings, D., Walker, G. S., Gillott, M., & Grant, D. M. (2019) · Energy · doi:10.1016/j.energy.2019.116108 · Cited by 287
Scaling theory of melting with natural convection in an enclosure
Jany, P., & Bejan, A. (1988) · International Journal of Heat and Mass Transfer · doi:10.1016/0017-9310(88)90065-8 · Cited by 274
Experimental and numerical study on melting of phase change materials in metal foams at pore scale
Chen, Z., Gao, D., & Shi, J. (2014) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2014.01.003 · Cited by 269
He, Y.-L., Liu, Q., Li, Q., & Tao, W.-Q. (2019) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.08.135 · Cited by 269
Experimental analysis of phase change phenomenon of paraffin waxes embedded in copper foams
Mancin, S., Diani, A., Doretti, L., Hooman, K., & Rossetto, L. (2015) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2014.11.023 · Cited by 261
Role of porous metal foam on the heat transfer enhancement for a thermal energy storage tube
Yang, X., Yu, J., Guo, Z., Jin, L., & He, Y.-L. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.01.075 · Cited by 257 · cited 2×
“54 FVM 3D C [94] Paraffin/ metal foam 0.”
BackgroundUnveiling thermal transitions of polymers in subnanometre pores
Uemura, T., Yanai, N., Watanabe, S., Tanaka, H., Numaguchi, R., Miyahara, M. T., Ohta, Y., Nagaoka, M., & Kitagawa, S. (2010) · Nature Communications · doi:10.1038/ncomms1091 · Cited by 255
Lafdi, K., Mesalhy, O., & Elgafy, A. (2008) · Carbon · doi:10.1016/j.carbon.2007.11.003 · Cited by 236
Qu, Z. G., Li, W. Q., & Tao, W. Q. (2014) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2013.12.136 · Cited by 230
Sundarram, S. S., & Li, W. (2014) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2013.11.072 · Cited by 225
Experimental study on enhancement of thermal energy storage with phase-change material
Yang, J., Yang, L., Xu, C., & Du, X. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.02.028 · Cited by 204
Xu, Y., Li, M.-J., Zheng, Z.-J., & Xue, X.-D. (2018) · Applied Energy · doi:10.1016/j.apenergy.2017.12.082 · Cited by 204
Feng, S., Shi, M., Li, Y., & Lu, T. J. (2015) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2015.06.088 · Cited by 201
Phase Change Heat Transfer Enhancement Using Copper Porous Foam
Siahpush, A., O’Brien, J., & Crepeau, J. (2008) · Journal of Heat Transfer · doi:10.1115/1.2928010 · Cited by 196
Rehman, T.-U., & Ali, H. M. (2018) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2018.08.003 · Cited by 193
Chen, Z., Gu, M., & Peng, D. (2010) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2010.04.031 · Cited by 189
Double MRT thermal lattice Boltzmann method for simulating convective flows
Mezrhab, A., Amine Moussaoui, M., Jami, M., Naji, H., & Bouzidi, M. (2010) · Physics Letters A · doi:10.1016/j.physleta.2010.06.059 · Cited by 188
Feng, D., Feng, Y., Qiu, L., Li, P., Zang, Y., Zou, H., Yu, Z., & Zhang, X. (2019) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2019.04.041 · Cited by 188
Self-citationYang, J., Yang, L., Xu, C., & Du, X. (2015) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2015.01.088 · Cited by 187
Baby, R., & Balaji, C. (2013) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2013.05.018 · Cited by 182
Al-Jethelah, M., Ebadi, S., Venkateshwar, K., Tasnim, S. H., Mahmud, S., & Dutta, A. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.11.121 · Cited by 181
A Two-Temperature Model for Solid-Liquid Phase Change in Metal Foams
Krishnan, S., Murthy, J. Y., & Garimella, S. V. (2005) · Journal of Heat Transfer · doi:10.1115/1.2010494 · Cited by 180
Effect of porosity of conducting matrix on a phase change energy storage device
Atal, A., Wang, Y., Harsha, M., & Sengupta, S. (2016) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2015.09.033 · Cited by 176
Zhang, P., Xiao, X., Meng, Z. N., & Li, M. (2015) · Applied Energy · doi:10.1016/j.apenergy.2014.10.004 · Cited by 173
Yang, X., Guo, Z., Liu, Y., Jin, L., & He, Y.-L. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.01.074 · Cited by 167
A multiple-relaxation-time lattice Boltzmann model for convection heat transfer in porous media
Liu, Q., He, Y.-L., Li, Q., & Tao, W.-Q. (2014) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2014.02.047 · Cited by 160
Fang, G., Tang, F., & Cao, L. (2014) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2014.07.179 · Cited by 151
Fukai, J., Hamada, Y., Morozumi, Y., & Miyatake, O. (2003) · International Journal of Heat and Mass Transfer · doi:10.1016/s0017-9310(03)00290-4 · Cited by 150
Tang, J., Yang, M. R., Fang, Y., Chen, X., Tan, L., & Wang, G. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.11.043 · Cited by 150
Self-citationRen, Q., Meng, F., & Guo, P. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.01.046 · Cited by 149
Joshi, V., & Rathod, M. K. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.113621 · Cited by 148
Shi, Y., Zhao, T. S., & Guo, Z. (2004) · Physical Review E · doi:10.1103/physreve.70.066310 · Cited by 144
Experimental study of a phase change thermal energy storage with copper foam
Martinelli, M., Bentivoglio, F., Caron-Soupart, A., Couturier, R., Fourmigué, J.-F., & Marty, P. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.02.095 · Cited by 143
Gao, D., & Chen, Z. (2010) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2010.11.010 · Cited by 141
Experimental and theoretical analysis of an aluminum foam enhanced phase change thermal storage unit
Fleming, E., Wen, S., Shi, L., & da Silva, A. K. (2014) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2014.11.022 · Cited by 140
Self-citationZhu, F., Zhang, C., & Gong, X. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.05.075 · Cited by 140
An enthalpy-based lattice Boltzmann model for diffusion dominated solid–liquid phase transformation
Chatterjee, D., & Chakraborty, S. K. (2005) · Physics Letters A · doi:10.1016/j.physleta.2005.04.080 · Cited by 135
Thermal response of annuli filled with metal foam for thermal energy storage: An experimental study
Yang, X., Wei, P., Cui, X. Y., Jin, L., & He, Y. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.05.096 · Cited by 134
Wang, H., Wang, F., Li, Z., et al. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.05.050 · Cited by 129
Self-citationZhu, F., Zhang, C., & Gong, X.-L. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.08.088 · Cited by 125
Li, A., Wang, J., Dong, C., Dong, W., Atinafu, D. G., Chen, X., Gao, H., & Wang, G. (2018) · Applied Energy · doi:10.1016/j.apenergy.2017.12.106 · Cited by 122
Self-citationCaliano, M., Bianco, N., Graditi, G., & Mongibello, L. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.113921 · Cited by 121
Zhang, Z., & He, X. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.10.173 · Cited by 112
Cui, H. T. (2012) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2012.01.037 · Cited by 109
Zhao, Y., Zhao, C., Xu, Z. G., & Xu, H. (2016) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2016.03.076 · Cited by 109
Zhang, X., Lin, Q., Luo, H., & Luo, S. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.114278 · Cited by 105
Jin, H.-Q., Fan, L., Liu, M., et al. (2017) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2017.04.114 · Cited by 103
Xiao, X., & Zhang, P. (2014) · Energy · doi:10.1016/j.energy.2014.11.020 · Cited by 97
Numerical Investigation of PCM Based Heat Sinks with Embedded Metal Foam/Crossed Plate Fins
Srivatsa, P. V. S. S., Baby, R., & Balaji, C. (2014) · Numerical Heat Transfer Part A Applications · doi:10.1080/10407782.2014.894371 · Cited by 96
Yang, X., Bai, Q., Guo, Z., Niu, Z., Yang, C., Jin, L., Lu, T. J., & Yan, J. (2018) · Applied Energy · doi:10.1016/j.apenergy.2018.08.012 · Cited by 89
Liu, Q., & He, Y. (2015) · Physica A Statistical Mechanics and its Applications · doi:10.1016/j.physa.2015.06.018 · Cited by 84
Allen, M. J., Sharifi, N., Faghri, A., & Bergman, T. L. (2014) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2014.09.071 · Cited by 84
Thermal charging performance of enhanced phase change material composites for thermal battery design
Mallow, A., Abdelaziz, O. A., & Graham, S. L. (2018) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2017.12.027 · Cited by 82
Ren, Q., He, Y.-L., Su, K.-Z., & Chan, C. L. (2017) · Numerical Heat Transfer Part A Applications · doi:10.1080/10407782.2017.1412224 · Cited by 78
Xiao, X., & Zhang, P. (2015) · Energy · doi:10.1016/j.energy.2014.11.061 · Cited by 72
Allen, M. J., Bergman, T. L., Faghri, A., & Sharifi, N. (2015) · ASME Journal of Heat and Mass Transfer · doi:10.1115/1.4029970 · Cited by 67
Pore-scale modeling of immiscible two-phase flow in complex porous media
Liu, Z., & Wu, H. (2015) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.08.099 · Cited by 66
Computational Studies on Metal Foam and Heat Pipe Enhanced Latent Thermal Energy Storage
Nithyanandam, K., & Pitchumani, R. (2013) · ASME Journal of Heat and Mass Transfer · doi:10.1115/1.4026040 · Cited by 66
Non-orthogonal multiple-relaxation-time lattice Boltzmann method for incompressible thermal flows
Liu, Q., He, Y., Li, D., & Li, Q. (2016) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2016.06.029 · Cited by 63
Liu, Q., Feng, X., He, Y., Lu, C., & Gu, Q. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2019.02.057 · Cited by 60
Numerical modeling of heat transfer in open-cell micro-foam with phase change material
Hu, X., Wan, H., & Patnaik, S. S. (2015) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2015.04.044 · Cited by 56
Thermal behavior of porous stainless-steel fiber felt saturated with phase change material
Li, W., Qu, Z., Zhang, B., Zhao, K., & Tao, W. (2013) · Energy · doi:10.1016/j.energy.2013.02.064 · Cited by 56
Peng, Y., Chew, Y. T., & Shu, C. (2003) · Physical review. E, Statistical physics, plasmas, fluids, and related interdisciplinary topics · doi:10.1103/physreve.67.026701 · Cited by 55
Pore-scale visualization and measurement of paraffin melting in high porosity open-cell copper foam
Yao, Y., Wu, H., Liu, Z., & Gao, Z. (2017) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2017.09.011 · Cited by 54
Song, W., Zhang, Y., Li, B., & Fan, X. (2015) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2015.11.008 · Cited by 50
Yang, J., Du, X., Yang, L., & Yang, Y. (2013) · Solar Energy · doi:10.1016/j.solener.2013.10.028 · Cited by 49
Schampheleire, S. D., Jaeger, P. D., Kerpel, K. D., et al. (2016) · Materials · doi:10.3390/ma9020094 · Cited by 48
Liu, Q., He, Y., & Li, Q. (2017) · Physical review. E · doi:10.1103/physreve.96.023303 · Cited by 40
Cozzolino, R., Chiappini, D., & Bella, G. (2019) · Energy Conversion and Management · doi:10.1016/j.enconman.2019.112101 · Cited by 36
Ma, Q., Chen, Z., & Liu, H. (2017) · Physical review. E · doi:10.1103/physreve.96.013313 · Cited by 29
Zhao, W., Zhang, Y., Xu, B. L., Li, P., Wang, Z., & Jiang, S. (2018) · Journal of Energy Resources Technology · doi:10.1115/1.4039775 · Cited by 29
Cited by
A review of the state-of-the-art in electronic cooling
Zhang, Z., Wang, X., & Yan, Y. (2021) · e-Prime - Advances in Electrical Engineering, Electronics and Energy · doi:10.1016/j.prime.2021.100009 · Cited by 310
Self-citationWeng, J., Huang, Q., Li, X., Zhang, G., Ouyang, D., Chen, M., Yuen, A. C. Y., Li, A., Lee, E. W. M., Yang, W., et al. (2022) · Energy Storage Materials · doi:10.1016/j.ensm.2022.09.007 · Cited by 297
Hassan, F., Jamil, F., Hussain, A., Ali, H. M., Janjua, M. M., Khushnood, S., Farhan, M., Altaf, K., Said, Z., & Li, C. (2022) · Sustainable Energy Technologies and Assessments · doi:10.1016/j.seta.2021.101646 · Cited by 283
Liu, Y., Zheng, R., & Li, J. (2022) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2022.112783 · Cited by 276
Zhang, J., Shao, D., Jiang, L., Zhang, G., Wu, H., Day, R., & Jiang, W. (2022) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2022.112207 · Cited by 263
Metadata
- Authors
- Zhang, S., Feng, D., Shi, L., Wang, L., Jin, Y., Tian, L., Li, Z., Wang, G., Zhao, L., & Yan, Y.
- Venue
- Renewable and Sustainable Energy Reviews
- Publisher
- Elsevier BV
- Published
- 2021-01
- Volume
- 135
- Pages
- 110127
- ISSN
- 1364-0321 (ISSN-L)
- OpenAlex
- W3077766806
- Cited by
- 568
- References
- 111
- FWCI
- 36.12
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.