The DOI matches its Crossref record; 74 of the 74 references it cites were found in a registry or an index.
Grey-box modeling and application for building energy simulations - A critical review
Open accessAbstract
Abstract Grey-box modeling, as one of the three fundamental modeling techniques for building energy models, has many advantages compared with black-box modeling and white-box modeling. It has been widely applied to solve problems of building technologies, such as building load estimation, control and optimization, and building-grid integration. However, a thorough review of grey-box modeling is not available. This review study systematically investigated various aspects of grey-box modeling for buildings. First, the fundamental aspects of grey-box modeling are presented, including the theoretical background, modeling of building elements, modeling order, modeling diagram, and order reduction. Second, the detailed modeling approaches are discussed. Third, multiple applications of grey-box modeling are investigated for building energy domain, which are categorized into the following groups: heat dynamics analysis, thermal load estimation, building control and optimization, district/urban scale energy modeling, and building-grid integration. Finally, the available software packages for grey-box modeling are compared. Overall, the challenges of using grey-box modeling can be summarized as follows: (1) the theoretical limitations and assumptions of grey-box modeling are unclear; (2) grey-box model naming convention and structure are confusing; (3) grey-box model creation is vague; (4) suitable applications of grey-box models are unknown; and (5) grey-box models lack unified software solutions for wider adoption.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Approximation of Large-Scale Dynamical Systems
Antoulas, A. C. (2005) · Society for Industrial and Applied Mathematics eBooks · doi:10.1137/1.9780898718713 · Cited by 3,655
ASHRAE Handbook—1981 Fundamentals
(1981) · Building Services Engineering Research and Technology · doi:10.1177/014362448100200409 · Cited by 3,403
Proceedings of the 2004 American Control Conference
(2004) · Proceedings of the 2004 American Control Conference · doi:10.23919/acc.2004.1383555 · Cited by 2,605
Theory and applications of HVAC control systems – A review of model predictive control (MPC)
Afram, A., & Janabi-Sharifi, F. (2014) · Building and Environment · doi:10.1016/j.buildenv.2013.11.016 · Cited by 1,310
Nonlinear System Identification
Nelles, O. (2001) · Springer eBooks · doi:10.1007/978-3-662-04323-3 · Cited by 1,271
Nonlinear system identification
Walter, E. (2003) · Automatica · doi:10.1016/s0005-1098(02)00239-x · Cited by 1,056
2013 American Control Conference
(2013) · doi:10.1109/acc31500.2013 · Cited by 979
Applying support vector machines to predict building energy consumption in tropical region
Dong, B., Cao, C., & Lee, S. E. (2005) · Energy and Buildings · doi:10.1016/j.enbuild.2004.09.009 · Cited by 800
Identifying suitable models for the heat dynamics of buildings
Bacher, P., & Madsen, H. (2011) · Energy and Buildings · doi:10.1016/j.enbuild.2011.02.005 · Cited by 700
A survey of model reduction methods for large-scale systems
Antoulas, A. C., Sorensen, D. C., & Gugercin, S. (2001) · Contemporary Mathematics · doi:10.1090/conm/280/04630 · Cited by 680
Zero Energy Buildings: A Critical Look at the Definition
Torcellini, P., Pless, S., Deru, M. P., & Crawley, D. B. (2006) · Cited by 608
An Inverse Gray-Box Model for Transient Building Load Prediction
Braun, J. E., & Chaturvedi, N. (2002) · HVAC&R Research · doi:10.1080/10789669.2002.10391290 · Cited by 328
Wang, S., & Xu, X. (2006) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2005.06.009 · Cited by 308
1984 American Control Conference
(1983) · IEEE Power Engineering Review · doi:10.1109/mper.1983.5518918 · Cited by 304
Estimation of continuous-time models for the heat dynamics of a building
Madsen, H., & Holst, J. (1995) · Energy and Buildings · doi:10.1016/0378-7788(94)00904-x · Cited by 277
Building thermal model reduction using nonlinear constrained optimization
Gouda, M. M., Danaher, S., & Underwood, C. P. (2002) · Building and Environment · doi:10.1016/s0360-1323(01)00121-4 · Cited by 250
A model-based fault detection and diagnostic methodology based on PCA method and wavelet transform
Li, S., & Wen, J. (2014) · Energy and Buildings · doi:10.1016/j.enbuild.2013.08.044 · Cited by 244
Building simulation: Ten challenges
Hong, T., Langevin, J., & Sun, K. (2018) · Building Simulation · doi:10.1007/s12273-018-0444-x · Cited by 234
Parameter estimation of internal thermal mass of building dynamic models using genetic algorithm
Wang, S., & Xu, X. (2006) · Energy Conversion and Management · doi:10.1016/j.enconman.2005.09.011 · Cited by 227
Reynders, G., Diriken, J., & Saelens, D. (2014) · Energy and Buildings · doi:10.1016/j.enbuild.2014.07.025 · Cited by 210
Zhao, Y., Wen, J., Xiao, F., Yang, X., & Wang, S. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.09.121 · Cited by 206
Harb, H., Boyanov, N., Hernandez, L., Streblow, R., & Müller, D. (2016) · Energy and Buildings · doi:10.1016/j.enbuild.2016.02.021 · Cited by 198
Comparisons of inverse modeling approaches for predicting building energy performance
Zhang, Y., O'Neill, Z., Dong, B., & Augenbroe, G. (2015) · Building and Environment · doi:10.1016/j.buildenv.2014.12.023 · Cited by 195
Self-citationEKF based self-adaptive thermal model for a passive house
Fux, S. F., Ashouri, A., Benz, M. J., & Guzzella, L. (2014) · Energy and Buildings · doi:10.1016/j.enbuild.2012.06.016 · Cited by 194
Simplified thermal and hygric building models: A literature review
Kramer, R. P., van Schijndel, J. W. M., & Schellen, H. L. (2012) · Frontiers of Architectural Research · doi:10.1016/j.foar.2012.09.001 · Cited by 191
Bueno, B., Norford, L., Pigeon, G., & Britter, R. (2012) · Building and Environment · doi:10.1016/j.buildenv.2012.01.023 · Cited by 190
System Identification: A Machine Learning Perspective
Chiuso, A., & Pillonetto, G. (2018) · Annual Review of Control Robotics and Autonomous Systems · doi:10.1146/annurev-control-053018-023744 · Cited by 186
Huang, H., Chen, L., & Hu, E. (2015) · Building and Environment · doi:10.1016/j.buildenv.2015.01.037 · Cited by 181
Model-based demand-limiting control of building thermal mass
Lee, K.-H., & Braun, J. E. (2007) · Building and Environment · doi:10.1016/j.buildenv.2007.10.009 · Cited by 167
Berthou, T., Stabat, P., Salvazet, R., & Marchio, D. (2014) · Energy and Buildings · doi:10.1016/j.enbuild.2014.01.038 · Cited by 164
A critical review of fault modeling of HVAC systems in buildings
Li, Y., & O’Neill, Z. D. (2018) · Building Simulation · doi:10.1007/s12273-018-0458-4 · Cited by 164
Self-citationA review of identification in continuous-time systems
Unbehauen, H., & Rao, G. P. (1998) · Annual Reviews in Control · doi:10.1016/s1367-5788(98)00015-7 · Cited by 152
Hu, M., Xiao, F., & Wang, L. (2017) · Applied Energy · doi:10.1016/j.apenergy.2017.05.099 · Cited by 150
Building-to-grid predictive power flow control for demand response and demand flexibility programs
Razmara, M., Bharati, G. R., Hanover, D., Shahbakhti, M., Paudyal, S., & Robinett, R. D. (2017) · Applied Energy · doi:10.1016/j.apenergy.2017.06.040 · Cited by 144
Zhao, Y., Wen, J., & Wang, S. (2015) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.07.001 · Cited by 143
Low order thermal network models for dynamic simulations of buildings on city district scale
Lauster, M., Teichmann, J., Fuchs, M., Streblow, R., & Mueller, D. (2014) · Building and Environment · doi:10.1016/j.buildenv.2013.12.016 · Cited by 139
Building thermal model reduction via aggregation of states
Deng, K., Barooah, P., Mehta, P. G., & Meyn, S. (2010) · Proceedings of the ... American Control Conference/Proceedings of the American Control Conference · doi:10.1109/acc.2010.5530470 · Cited by 136
Yang, S., Wan, M. P., Ng, B. F., Zhang, T., Babu, S., Zhang, Z., Chen, W., & Dubey, S. (2018) · Energy and Buildings · doi:10.1016/j.enbuild.2018.03.082 · Cited by 133
Toolbox for development and validation of grey-box building models for forecasting and control
Coninck, R. D., Magnusson, F., Åkesson, J., & Helsen, L. (2015) · Journal of Building Performance Simulation · doi:10.1080/19401493.2015.1046933 · Cited by 130
Black-box models from input-output measurements
Lennart Ljung, A. (2002) · Conference proceedings - IEEE Instrumentation/Measurement Technology Conference · doi:10.1109/imtc.2001.928802 · Cited by 130
BRCM Matlab Toolbox: Model generation for model predictive building control
Sturzenegger, D., Gyalistras, D., Semeraro, V., Morari, M., & Smith, R. S. (2014) · Proceedings of the ... American Control Conference/Proceedings of the American Control Conference · doi:10.1109/acc.2014.6858967 · Cited by 126
Li, S., Joe, J., Hu, J., & Karava, P. (2015) · Solar Energy · doi:10.1016/j.solener.2014.11.024 · Cited by 121
A grey-box model of next-day building thermal load prediction for energy-efficient control
Zhou, Q., Wang, S., Xu, X., & Xiao, F. (2008) · International Journal of Energy Research · doi:10.1002/er.1458 · Cited by 118
Model predictive control strategies for buildings with mixed-mode cooling
Hu, J., & Karava, P. (2013) · Building and Environment · doi:10.1016/j.buildenv.2013.09.005 · Cited by 115
Vivian, J., Zarrella, A., Emmi, G., & Carli, M. D. (2017) · Energy and Buildings · doi:10.1016/j.enbuild.2017.06.021 · Cited by 108
Harish, V. S. K. V., & Kumar, A. (2015) · Applied Energy · doi:10.1016/j.apenergy.2015.10.137 · Cited by 106
Salakij, S., Yu, N., Paolucci, S., & Antsaklis, P. J. (2016) · Energy and Buildings · doi:10.1016/j.enbuild.2016.09.044 · Cited by 97
Zong, Y., Böning, G. M., Santos, R. M., You, S., Hu, J., & Han, X. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.11.141 · Cited by 91
Model-Based Thermal Load Estimation of Buildings
O’Neill, Z. D., Narayanan, S., & Brahme, R. (2010) · IBPSA-USA Building Simulation Conference (SimBuild) · doi:10.26868/30680611.2010.ts09b-02-oneill · Cited by 85
Self-citationModel predictive control for building loads connected with a residential distribution grid
Mirakhorli, A., & Dong, B. (2018) · Applied Energy · doi:10.1016/j.apenergy.2018.08.051 · Cited by 81
Simplified thermal and hygric building models: A literature review
Rick, Kramer, D., Jos, et al. (2012) · Acta Scientiarum Naturalium Universitatis Sunyatseni · Cited by 78
Hu, J., & Karava, P. (2014) · Building and Environment · doi:10.1016/j.buildenv.2014.05.003 · Cited by 76
Thermal parameter identification of simplified building model with electric appliance
Park, H., Ruellan, M., Bouvet, A., Monmasson, É., & Bennacer, R. (2011) · International Conference on Electrical Power Quality and Utilisation · doi:10.1109/epqu.2011.6128822 · Cited by 76
Rouchier, S., Rabouille, M., & Oberlé, P. (2018) · Building and Environment · doi:10.1016/j.buildenv.2018.02.043 · Cited by 76
Urban energy simulation: Simplification and reduction of building envelope models
Kim, E.-J., Plessis, G., Hubert, J.-L., & Roux, J.-J. (2014) · Energy and Buildings · doi:10.1016/j.enbuild.2014.07.066 · Cited by 74
Kim, D., Cai, J., Ariyur, K. B., & Braun, J. E. (2016) · Building and Environment · doi:10.1016/j.buildenv.2016.07.007 · Cited by 74
Gray, F. M., & Schmidt, M. (2018) · Energy and Buildings · doi:10.1016/j.enbuild.2018.01.039 · Cited by 74
Li, A., Sun, Y., & Xu, X. (2017) · Energy and Buildings · doi:10.1016/j.enbuild.2017.06.011 · Cited by 70
Application of a simplified thermal network model for real-time thermal load estimation
Ogunsola, O. T., & Song, L. (2015) · Energy and Buildings · doi:10.1016/j.enbuild.2015.03.044 · Cited by 65
Viot, H., Sempey, A., Mora, L., Batsale, J., & Malvestio, J. (2018) · Energy and Buildings · doi:10.1016/j.enbuild.2018.04.055 · Cited by 63
Gori, V., & Elwell, C. A. (2018) · Energy and Buildings · doi:10.1016/j.enbuild.2018.02.048 · Cited by 61
OpenBuild : An integrated simulation environment for building control
Gorecki, T. T., Qureshi, F. A., & Jones, C. N. (2015) · The proceedings of the IEEE Conference on Control Applications/The proceedings of the ... IEEE Conference on Control Applications · doi:10.1109/cca.2015.7320826 · Cited by 60
Structure-preserving model reduction of nonlinear building thermal models
Deng, K., Goyal, S., Barooah, P., & Mehta, P. G. (2014) · Automatica · doi:10.1016/j.automatica.2014.02.009 · Cited by 60
Michalak, P. (2014) · Energy · doi:10.1016/j.energy.2014.08.019 · Cited by 57
Model Predictive Control of thermal comfort as a benchmark for controller performance
Hazyuk, I., Ghiaus, C., & Penhouet, D. (2014) · Automation in Construction · doi:10.1016/j.autcon.2014.03.016 · Cited by 55
Bruno, R., Pizzuti, G., & Arcuri, N. (2016) · Energy Procedia · doi:10.1016/j.egypro.2016.11.025 · Cited by 53
Jara, E. Á. R., de la Flor, F. J. S., Domínguez, S. Á., Félix, J. L. M., & Lissén, J. M. S. (2016) · Energy and Buildings · doi:10.1016/j.enbuild.2016.08.039 · Cited by 48
Coffman, A. R., & Barooah, P. (2017) · Building and Environment · doi:10.1016/j.buildenv.2017.10.020 · Cited by 48
Zhuang, J., Chen, Y., & Chen, X. (2018) · Building and Environment · doi:10.1016/j.buildenv.2017.10.022 · Cited by 44
Gao, J., Yan, T., Xu, T., Ling, Z., Wei, G., & Xu, X. (2018) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.09.124 · Cited by 39
A Simplified Thermal Model to Control the Energy Fluxes and to Improve the Performance of Buildings
Danza, L., Belussi, L., Meroni, I., Salamone, F., Floreani, F., Piccinini, A., & Dabusti, A. (2016) · Energy Procedia · doi:10.1016/j.egypro.2016.11.013 · Cited by 38
A dynamic simplified model of radiant ceiling cooling integrated with underfloor ventilation system
Zhang, D., Xia, X., & Cai, N. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.06.017 · Cited by 32
Ogunsola, O. T., & Song, L. (2012) · doi:10.1115/imece2012-86988 · Cited by 14
Testing building controls with the BLDG toolbox
Kircher, K. J., & Zhang, K. M. (2016) · Proceedings of the ... American Control Conference/Proceedings of the American Control Conference · doi:10.1109/acc.2016.7525124 · Cited by 9
Cited by
Physical energy and data-driven models in building energy prediction: A review
Chen, Y., Guo, M., Chen, Z., Chen, Z., & Ji, Y. (2022) · Energy Reports · doi:10.1016/j.egyr.2022.01.162 · Cited by 384
Kim, D., Lee, J., Do, S., Mago, P. J., Lee, K. H., & Cho, H. (2022) · Energies · doi:10.3390/en15197231 · Cited by 111
Robust MPC with data-driven demand forecasting for frequency regulation with heat pumps
Bünning, F., Warrington, J., Heer, P., Smith, R. S., & Lygeros, J. (2022) · Control Engineering Practice · doi:10.1016/j.conengprac.2022.105101 · Cited by 47
“In addition to the grey-box modeling approach [15, 13, 38], where parameters of a physical model are fitted to measurement data, there is growing interest in data-driven and machine learning based building models, both of which can be more cost-effective compared to first-principles models, as they are parametrized wi…”
Method
Metadata
- Authors
- Li, Y., O'Neill, Z., Zhang, L., Chen, J., Im, P., & DeGraw, J.
- Venue
- Renewable and Sustainable Energy Reviews
- Publisher
- Elsevier BV
- Published
- 2021-08
- Volume
- 146
- Pages
- 111174
- ISSN
- 1364-0321 (ISSN-L)
- OpenAlex
- W3158049794
- Cited by
- 359
- References
- 74
- FWCI
- 22.65
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.