The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Evaluation of fly ash- and slag-based geopolymers for the improvement of a soft marine clay by deep soil mixing
Open accessAbstract
The use of deep soil mixing (DSM) in ground-improvement projects, for structures subjected to low to medium loads, has increased over the past decade due to its convenient and practical implementation and its economic advantages. Traditionally, Portland cement and lime have been the most popular binders for DSM applications. However, the ground-improvement industry has been keen to explore environmentally friendly alternatives with low carbon dioxide emission. The aim of this research is to investigate the use of two stockpiled industrial waste by-products, namely, fly ash (FA) and slag (S), as alternative green binders in ground-improvement projects that would reduce the carbon footprint of these projects. In this research, combinations of FA and S, activated by a liquid alkaline activator (L), were evaluated for the ground improvement of a soft marine clay, namely, Coode Island Silt (CIS). The performance of the FA + S geopolymers was compared with that of traditional cement and lime control binders. The soil moisture content was set at 0.75, 1.0 and 1.25 of the liquid limit (LL) of the soil to replicate the field conditions. 10, 20 and 30% binders, by dry soil mass, were added to the soil, and the samples were cured for 7 and 28 days. Unconfined compression strength (UCS), flexural beam and scanning electron microscopy (SEM) imaging tests were conducted to evaluate the changes in the engineering behavior and the microstructure of the mixtures. The results indicated that the strength and stiffness of the soft clay were significantly increased by the use of these new FA + S binders, which substantiated them as alternatives to traditional cement or lime binders. The optimum binder content was found to be 20%, while CIS + 5%FA + 15%S was found to be the optimum mixture. Furthermore, correlations between the UCS and the modulus of elasticity (E50) and between the UCS and the modulus of rupture (R) for the geopolymer mixtures were proposed. They will be valuable to both designers and practitioners of ground-improvement works.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Jiang, N.-J., Du, Y.-J., Liu, S.-Y., Wei, M.-L., Horpibulsuk, S., & Arulrajah, A. (2016) · Canadian Geotechnical Journal · doi:10.1139/cgj-2015-0245 · Cited by 198
Self-citation
Cited by
A state-of-the-art review of polymers used in soil stabilization
Huang, J., Kogbara, R. B., Hariharan, N., Masad, E. A., & Little, D. N. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2021.124685 · Cited by 304
Stabilization of expansive soil using flyash based geopolymer
Santhikala, R., Chandramouli, K., & Pannirselvam, N. (2022) · Materials Today: Proceedings · doi:10.1016/j.matpr.2022.07.006 · Cited by 50
Yu, X.-Q., Zhang, M., Li, C.-Y., Hayano, K., & Kang, X. (2024) · Case Studies in Construction Materials · doi:10.1016/j.cscm.2024.e03261 · Cited by 47
Metadata
- Authors
- Arulrajah, A., Yaghoubi, M., Disfani, M. M., Horpibulsuk, S., Bo, M. W., & Leong, M.
- Venue
- Soils and Foundations
- Publisher
- Elsevier BV
- Published
- 2018-12
- Volume
- 58
- Issue
- 6
- Pages
- 1358-1370
- ISSN
- 0038-0806 (ISSN-L)
- OpenAlex
- W2889573857
- Cited by
- 203
- References
- 1
- FWCI
- 10.55
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.