Cited by 119Adsorption and biosorption for pollutant removalMesoporous Materials and CatalysisCarbon Dioxide Capture Technologies

Meso/micropore-controlled hierarchical porous carbon derived from activated biochar as a high-performance adsorbent for copper removal

Cuong, Dinh Viet, Liu, Nei-Ling, Nguyen, Viet Anh, Hou, Chia-Hung·2019·Science of The Total Environment

Abstract

High-quality meso/micropore-controlled hierarchical porous carbon (HPC) was synthesized by a hard template method utilizing rice husk biochar and then used to adsorb copper ions from an aqueous solution. The preparation procedure included two main steps: base leaching and physicochemical activation. During the activation process, the porosity characteristics (i.e., specific surface area and meso/micropore ratio) were controlled by altering the KOH impregnation ratio, activation time, and temperature under the CO 2 atmosphere. In addition, a copper adsorption study was performed using three HPC samples with different pore structures and characteristics. The results of this study indicate that the adsorption capacity of HPC material derived from rice husk biochar is strongly influenced by its meso/micropore ratio. As evidenced, HPC 3-0.5-800, which was impregnated by a KOH:biochar ratio of 3 and activated at 800°C for 0.5h under a CO 2 atmosphere, has a very high specific surface area of 2330 m 2 g-1 with an 81% mesopore to total specific surface area. Importantly, it exhibited a superior adsorption capacity of 265mgg-1 and rapid adsorption kinetics for copper ions. The improvement is ascribed to the high specific surface area and favorable hierarchical structure. The findings demonstrate the feasibility of controlling the hierarchical pore structure of rice husk biochar-derived carbons as high-performance adsorbents for copper ion removal from water.

Integrity signals

Registry

Crossref · 10.1016/j.scitotenv.2019.07.125

Cites

52 of 52 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Claims the paper makes

This paper’s full text isn’t openly available, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

  • Biochar can be used as a support for catalytic nanoparticles to take advantage of properties such as high electrical conductivity, chemical stability, tunable functional groups, and unique surface properties.

    “Biochar can be used as a support for catalytic nanoparticles to take advantage of their exceptional properties such as high electrical conductivity, chemical stability, having functional groups that can easily be tuned and unique surface properties (Cuong etal. 2019; Liu etal. 2015; Xia and Larock 2010).”

Cites

Flagged first, then by citations

Cited by

Sorted by citations

Authors
Cuong, D. V., Liu, N.-L., Nguyen, V. A., & Hou, C.-H.
Affiliations
National Taiwan University (TW)
Corresponding author
Hou, Chia-Hung
Venue
Science of The Total Environment
Publisher
Elsevier BV
Published
2019-11
Volume
692
Pages
844-853
ISSN
0048-9697 (ISSN-L)
OpenAlex
W2961388381
Cited by
119
References
52
Citations by year
2026: 11 · 2025: 15 · 2024: 14 · 2023: 19 · 2022: 28 · 2021: 19 · 2020: 12 · 2019: 1
FWCI
5.43
Type
journal article
Language
en
Open access
closed
Locations
  • The Science of The Total Environment (publishedVersion)
  • PubMed (publishedVersion)
Funders
  • Environmental Protection Administration, Executive Yuan, R.O.C. Taiwan
  • Ministry of Science and Technology, Taiwan
Topics
  • Physical Sciences › Environmental Science › Water Science and Technology › Adsorption and biosorption for pollutant removal
  • Physical Sciences › Materials Science › Materials Chemistry › Mesoporous Materials and Catalysis
  • Physical Sciences › Engineering › Mechanical Engineering › Carbon Dioxide Capture Technologies
Keywords
hierarchical porous carbon, rice husk biochar, copper adsorption, heavy metal removal from water, KOH activation, physicochemical activation, hard template method, specific surface area, adsorption kinetics, adsorbent preparation
MeSH terms
Adsorption, Charcoal, Copper, Hydroxides, Kinetics, Oryza, Waste Disposal, Fluid, Water Pollutants, Chemical, Porosity, Potassium Compounds, Water Purification

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review