The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Biochar admixtured lightweight, porous and tougher cement mortars: Mechanical, durability and micro computed tomography analysis
Abstract
Currently, the global carbon footprint of cement industry is nearly 7 to 8% and this number is expected to grow in the near future given the continued global demand of cement usage in the construction and other sectors. Additionally, extraction of sand from the coastal and riverine environment is detrimental to ecosystem health and also gives rise to sand mafia in many developing countries. Biochar has the potential to sequester CO2 in cement mortars. The purpose of this study was to valorise a waste biomass (poultry litter) to carbon-rich biochar and utilise as filler material to replace the sand in the range of 10-40% of the total weight in cement. A total of four mix designs each with three replicates at 10%, 20%, and 40% replacement of sand and control (0% biochar addition) were investigated for their mechanical, durability and micro-computed tomography (CT) analysis. The results showed that the flexural strength of the composites at 20% biochar replacement of sand was improved by 26% when compared to control. Biochar addition lowered the thermal conductivity of the cement mortars and was optimised at 10% addition. The density of the mortars decreased ~20% with 40% biochar addition. Micro-CT analysis showed nearly a five-fold increase in the 2-dimensional porosity of the samples, from 2.5% (control) to 12% for samples which had 40% biochar; however, no marked changes were noticed for samples at 20% biochar addition. Taking mortar plastering as an example for 100 m2 area with standard 12 mm thickness revealed that CO2 emissions decreased 20% when sand was replaced with 40% biochar as compared to control specimen. It was concluded that biochar has the potential to replace the sand in the mortars for improving toughness, lowering thermal conductivity and density of the cement composites.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Effect of process parameters on production of biochar from biomass waste through pyrolysis: A review
Tripathi, M., Sahu, J. N., & Ganesan, P. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.10.122 · Cited by 1,759
Buildings as a global carbon sink
Churkina, G., Organschi, A., Reyer, C. P. O., Ruff, A., Vinke, K., Liu, Z., Reck, B. K., Graedel, T. E., & Schellnhuber, H. J. (2020) · Nature Sustainability · doi:10.1038/s41893-019-0462-4 · Cited by 1,045
Ahmad, S., Khushnood, R. A., Jagdale, P., Tulliani, J.-M., & Ferro, G. A. (2015) · Materials & Design · doi:10.1016/j.matdes.2015.03.048 · Cited by 148
Research works printed but not linked: 37
- Akhtar, 2018, Novel biochar-concrete composites: manufacturing, characterization and evaluation of the mechanical properties, Sci. Total Environ., 616–617, 408, 10.1016/j.scitotenv.2017.10.319 · DOI · Paper page
- Alavez-Ramirez, 2012, Thermal conductivity of coconut fibre filled ferrocement sandwich panels, Constr. Build. Mater., 37, 425, 10.1016/j.conbuildmat.2012.07.053 · doi:10.1016/j.conbuildmat.2012.07.053
- Alhashimi, 2017, Life cycle environmental and economic performance of biochar compared with activated carbon: a meta-analysis, Resour. Conserv. Recycl., 118, 13, 10.1016/j.resconrec.2016.11.016 · DOI · Paper page
- Asadi Zeidabadi, 2018, Synthesis, characterization and evaluation of biochar from agricultural waste biomass for use in building materials, Constr. Build. Mater., 181, 301, 10.1016/j.conbuildmat.2018.05.271 · DOI · Paper page
- Brewer, 2014, New approaches to measuring biochar density and porosity, Biomass Bioenergy, 66, 176, 10.1016/j.biombioe.2014.03.059 · DOI · Paper page
- Cha, 2016, Production and utilization of biochar: a review, J. Ind. Eng. Chem., 40, 1, 10.1016/j.jiec.2016.06.002 · DOI · Paper page
- Choi, 2012, Mechanical properties of mortar containing bio-char from pyrolysis, J. Korean Inst. Struct. Maint. Inspect., 16, 67
- Cosentino, 2018, Influence of pyrolysis parameters on the efficiency of the biochar as nanoparticles into cement-based composites, Procedia Struct. Integr., 13, 2132, 10.1016/j.prostr.2018.12.194 · DOI
- Cosentino, 2019, Type of materials, pyrolysis conditions, carbon content and size dimensions: the parameters that influence the mechanical properties of biochar cement-based composites, Theor. Appl. Fract. Mech., 103, 10.1016/j.tafmec.2019.102261 · DOI
- Cuthbertson, 2019, Biochar from residual biomass as a concrete filler for improved thermal and acoustic properties, Biomass Bioenergy, 120, 77, 10.1016/j.biombioe.2018.11.007 · DOI · Paper page
- Das, 2016, Characterisation of waste derived biochar added biocomposites: chemical and thermal modifications, Sci. Total Environ., 550, 133, 10.1016/j.scitotenv.2016.01.062 · DOI
- Djelal, 2020, Feasibility study of using poplar wastes as sand in cement mortars, J. Mater. Cycles Waste Manag., 22, 488, 10.1007/s10163-019-00946-x · doi:10.1007/s10163-019-00946-x
- du Plessis, 2019, A review of X-ray computed tomography of concrete and asphalt construction materials, Constr. Build. Mater., 199, 637, 10.1016/j.conbuildmat.2018.12.049 · doi:10.1016/j.conbuildmat.2018.12.049
- du Plessis, 2016, Simple and fast porosity analysis of concrete using X-ray computed tomography, Mater. Struct. Constr., 49, 553, 10.1617/s11527-014-0519-9 · DOI
- Fakayode, 2020, Co-pyrolysis of lignocellulosic and macroalgae biomasses for the production of biochar – a review, Bioresour. Technol., 297, 10.1016/j.biortech.2019.122408 · DOI · Paper page
- Gupta, 2017, Factors determining the potential of biochar as a carbon capturing and sequestering construction material: critical review, J. Mater. Civ. Eng., 29, 10.1061/(ASCE)MT.1943-5533.0001924 · DOI · Paper page
- Gupta, 2018, Effect of water entrainment by pre-soaked biochar particles on strength and permeability of cement mortar, Constr. Build. Mater., 159, 107, 10.1016/j.conbuildmat.2017.10.095 · DOI · Paper page
- Gupta, 2018, Use of biochar as carbon sequestering additive in cement mortar, Cem. Concr. Compos., 87, 110, 10.1016/j.cemconcomp.2017.12.009 · DOI · Paper page
- Ibarrola, 2012, Pyrolysis biochar systems for recovering biodegradable materials: a life cycle carbon assessment, Waste Manag., 32, 859, 10.1016/j.wasman.2011.10.005 · DOI
- Khushnood, 2016, Carbonized nano/microparticles for enhanced mechanical properties and electromagnetic interference shielding of cementitious materials, Front. Struct. Civ. Eng., 10, 209, 10.1007/s11709-016-0330-5 · DOI
- Kurda, 2018, Toxicity and environmental and economic performance of fly ash and recycled concrete aggregates use in concrete: a review, Heliyon, 4, 10.1016/j.heliyon.2018.e00611 · DOI
- Lavrov, 2017, Synchrotron study of cement hydration: towards computed tomography analysis of interfacial transition zone, Energy Procedia, 114, 5109, 10.1016/j.egypro.2017.03.1666 · doi:10.1016/j.egypro.2017.03.1666
- Lu, 2018, Measurement of entrained air-void parameters in Portland cement concrete using micro X-ray computed tomography, Int. J. Pavement Eng., 19, 109, 10.1080/10298436.2016.1172705 · doi:10.1080/10298436.2016.1172705
- Matovic, 2011, Biochar as a viable carbon sequestration option: global and Canadian perspective, Energy, 36, 2011, 10.1016/j.energy.2010.09.031 · DOI · Paper page
- Mo, 2019, Combined effects of biochar and MgO expansive additive on the autogenous shrinkage, internal relative humidity and compressive strength of cement pastes, Constr. Build. Mater., 229, 10.1016/j.conbuildmat.2019.116877 · DOI
- Muthukrishnan, 2019, Application of rice husk biochar and thermally treated low silica rice husk ash to improve physical properties of cement mortar, Theor. Appl. Fract. Mech., 104, 102376, 10.1016/j.tafmec.2019.102376 · DOI · Paper page
- Novais, 2016, Porous biomass fly ash-based geopolymers with tailored thermal conductivity, J. Clean. Prod., 119, 99, 10.1016/j.jclepro.2016.01.083 · DOI · Paper page
- Praneeth, 2020, Accelerated carbonation of biochar reinforced cement-fly ash composites: enhancing and sequestering CO2 in building materials, Constr. Build. Mater., 244, 10.1016/j.conbuildmat.2020.118363 · DOI · Paper page
- Restuccia, 2016, Promising low cost carbon-based materials to improve strength and toughness in cement composites, Constr. Build. Mater., 126, 1034, 10.1016/j.conbuildmat.2016.09.101 · DOI · Paper page
- Rheinheimer, 2017, Multi-scale study of high-strength low-thermal-conductivity cement composites containing cenospheres, Cem. Concr. Compos., 80, 91, 10.1016/j.cemconcomp.2017.03.002 · doi:10.1016/j.cemconcomp.2017.03.002
- Seifan, 2020, Mechanical properties and durability performance of fly ash based mortar containing nano- and micro-silica additives, Constr. Build. Mater., 252, 10.1016/j.conbuildmat.2020.119121 · DOI
- Shafie, 2012, Effect of pyrolysis temperature on the biochar nutrient and water retention capacity, Purity, Util. React. Environ., 1, 323
- Shon, 2019, Can common reed fiber become an effective construction material? Physical, mechanical, and thermal properties of mortar mixture containing common reed fiber, Sustain, 11
- Sumaraj Xiong, 2020, Acidic surface functional groups control chemisorption of ammonium onto carbon materials in aqueous media, Sci. Total Environ., 698
- Wang, 2018, Spatial distribution of steel fibers and air bubbles in UHPC cylinder determined by X-ray CT method, Constr. Build. Mater., 160, 39, 10.1016/j.conbuildmat.2017.11.030 · doi:10.1016/j.conbuildmat.2017.11.030
- Xu, 2018, Experimental studies and modeling of creep of UHPC, ConstrBuildMater., 175, 643
- Yang, 2019, Biochar-red clay composites for energy efficiency as eco-friendly building materials: thermal and mechanical performance, J. Hazard. Mater., 373, 844, 10.1016/j.jhazmat.2019.03.079 · DOI
Cited by
Biochar as construction materials for achieving carbon neutrality
Zhang, Y., He, M., Wang, L., Yan, J., Ma, B., Zhu, X., Ok, Y. S., Mechtcherine, V., & Tsang, D. C. W. (2022) · Biochar · doi:10.1007/s42773-022-00182-x · Cited by 322
Abhishek, K., Shrivastava, A., Vimal, V., Gupta, A. K., Bhujbal, S. K., Biswas, J. K., Singh, L., Ghosh, P., Pandey, A., Sharma, P., et al. (2022) · Science of The Total Environment · doi:10.1016/j.scitotenv.2022.158562 · Cited by 255
Application of biochar in concrete – A review
Senadheera, S. S., Gupta, S., Kua, H. W., Hou, D., Kim, S., Tsang, D. C. W., & Ok, Y. S. (2023) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2023.105204 · Cited by 255
Role of biochar toward carbon neutrality
Wang, L., Deng, J., Yang, X., Hou, R., & Hou, D. (2023) · Carbon Research · doi:10.1007/s44246-023-00035-7 · Cited by 195
Potential of biochar use in building materials
Legan, M., Gotvajn, A. Ž., & Zupan, K. (2022) · Journal of Environmental Management · doi:10.1016/j.jenvman.2022.114704 · Cited by 123
Metadata
- Authors
- Praneeth, S., Saavedra, L., Zeng, M., Dubey, B. K., & Sarmah, A. K.
- Venue
- Science of The Total Environment
- Publisher
- Elsevier BV
- Published
- 2021-01
- Volume
- 750
- Pages
- 142327
- ISSN
- 0048-9697 (ISSN-L)
- OpenAlex
- W3085834877
- Cited by
- 174
- References
- 3
- FWCI
- 8.45
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- www.elsevier.com/tdm/userlicense/1.0/ (tdm)
- www.elsevier.com/legal/tdmrep-license (tdm)
- Funders
- University of Auckland
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Biochar admixtured lightweight, porous and tougher cement mortars: Mechanical, durability and micro computed tomography analysis. https://app.cochat.ai/papers/10.1016/j.scitotenv.2020.142327
- The paper
- Praneeth, S., Saavedra, L., Zeng, M., Dubey, B. K., & Sarmah, A. K. (2021). Biochar admixtured lightweight, porous and tougher cement mortars: Mechanical, durability and micro computed tomography analysis. Science of The Total Environment. https://doi.org/10.1016/j.scitotenv.2020.142327
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.