The DOI matches its Crossref record; 57 of the 57 references it cites were found in a registry or an index.
Why reuse spent adsorbents? The latest challenges and limitations
Abstract
Despite the abundance of published reviews over the last few years, the inconsistent data representation in regards to the use of adsorbents in each work, renders the task of comparing them challenging. Disposing the adsorbent may have adverse environmental impact, which should be mitigated through regeneration and reuse processes, such as desorption. This review discusses how the importance of desorption and regeneration equates that of the adsorption stage, and presents various regeneration methods as well as the influencing parameters, advantages, and disadvantages thereof. For the purposes of this work, the adsorbents have been categorized into four groups: (i) graphene, (ii) carbon nanotubes, (iii) activated carbon compounds and (iv) clays and polymer adsorbents as representatives in order to further study their desorption and regeneration abilities, using a variety of desorption media/eluants. The process conditions, such as pH, dose required, concentration, adsorption ability and the cost of the adsorbents were examined for further analysis. The recovery efficiency and ability to get reused through the desorption process was also evaluated. The highest adsorption capacity was observed for graphene-based adsorbents reaching between 108 and >480 mg/g, and for activated carbon materials ranging from 34 to >384 mg/g, whereas carbon nanotubes and polymer-based adsorbents indicated rather low and greatly varying adsorption capacities, between 1 and >138 mg/g and between 7 and >57 mg/g, respectively. Most of the reviewed cases appear to fit the pseudo-second order (PSO) kinetic model. These materials have demonstrated a removal effectiveness between 71% and 99%. Overall, all the aforementioned adsorbents share the advantage of being highly reusable.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Safe handling of nanotechnology
Maynard, A. D., Aitken, R. J., Butz, T., Colvin, V., Donaldson, K., Oberdörster, G., Philbert, M. A., Ryan, J., Seaton, A., Stone, V., et al. (2006) · Nature · doi:10.1038/444267a · Cited by 1,496
Gupta, V. K., & Nayak, A. (2012) · Chemical Engineering Journal · doi:10.1016/j.cej.2011.11.006 · Cited by 975
Kabra, K., Chaudhary, R., & Sawhney, R. L. (2004) · Industrial & Engineering Chemistry Research · doi:10.1021/ie0498551 · Cited by 775
Carbon based materials: a review of adsorbents for inorganic and organic compounds
Sabzehmeidani, M. M., Mahnaee, S., Ghaedi, M., Heidari, H., & Roy, V. A. L. (2021) · Materials Advances · doi:10.1039/d0ma00087f · Cited by 646
Feasibility of industrial-scale treatment of dye wastewater via bio-adsorption technology
Li, W., Mu, B., & Yang, Y. (2019) · Bioresource Technology · doi:10.1016/j.biortech.2019.01.002 · Cited by 574
Regeneration of chitosan-based adsorbents used in heavy metal adsorption: A review
Vakili, M., Deng, S., Cagnetta, G., Wang, W., Meng, P., Liu, D., & Yu, G. (2019) · Separation and Purification Technology · doi:10.1016/j.seppur.2019.05.040 · Cited by 536
Regeneration of adsorbents and recovery of heavy metals: a review
Lata, S., Singh, P. K., & Samadder, S. R. (2015) · International Journal of Environmental Science and Technology · doi:10.1007/s13762-014-0714-9 · Cited by 491
Rápó, E., & Tonk, S. (2021) · Molecules · doi:10.3390/molecules26175419 · Cited by 490
Guo, K., Wu, Z., Yan, S., Yao, B., Song, W., Hua, Z., Zhang, X., Kong, X., Li, X., & Fang, J. (2018) · Water Research · doi:10.1016/j.watres.2018.08.048 · Cited by 425
Geng, Z., Lin, Y., Yu, X., Shen, Q., Ma, L., Li, Z., Pan, N., & Wang, X. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm15544c · Cited by 418
Cited by
Innovative Adsorbents for Pollutant Removal: Exploring the Latest Research and Applications
Akhtar, M. S., Ali, S., & Zaman, W. (2024) · Molecules · doi:10.3390/molecules29184317 · Cited by 423
Khan, M. D., Singh, A., Khan, M. Z., Tabraiz, S., & Sheikh, J. (2023) · Journal of Water Process Engineering · doi:10.1016/j.jwpe.2023.103579 · Cited by 384
Imran, A., & Ahmed, S. (2025) · International Journal of Environmental Science and Technology · doi:10.1007/s13762-025-06350-3 · Cited by 4
Metadata
- Authors
- Gkika, D. A., Mitropoulos, A. C., & Kyzas, G. Z.
- Venue
- Science of The Total Environment
- Publisher
- Elsevier BV
- Published
- 2022-05
- Volume
- 822
- Pages
- 153612
- ISSN
- 0048-9697 (ISSN-L)
- OpenAlex
- W4210701034
- Cited by
- 274
- References
- 57
- FWCI
- 15.07
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Why reuse spent adsorbents? The latest challenges and limitations. https://app.cochat.ai/papers/10.1016/j.scitotenv.2022.153612
- The paper
- Gkika, D. A., Mitropoulos, A. C., & Kyzas, G. Z. (2022). Why reuse spent adsorbents? The latest challenges and limitations. Science of The Total Environment. https://doi.org/10.1016/j.scitotenv.2022.153612
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.